Hello guys
I flashed CM10 on my device...
But If I want to return to Stock JellyBaen When it releases , How to do that?
Can I download it from sammobile.com? and make it via odin as pda?
without doing any wipe before flashing it?
If yes please give me the odin and the steps>>>
Thank you alot
Madridii said:
Hello guys
I flashed CM10 on my device...
But If I want to return to Stock JellyBaen When it releases , How to do that?
Can I download it from sammobile.com? and make it via odin as pda?
without doing any wipe before flashing it?
If yes please give me the odin and the steps>>>
Thank you alot
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=34219382&postcount=1463 Just replace the Official rom whenever it is released.
Related
i bought sgs2 rooted
how can i back to official rom
i didn't want it to be rooted
how can i do that
thx for anyone can answer me
Just flash a stock ROM for the correct device.
via odin ?
and the kernal when can flash it after or befor ?
romano_ezzat said:
via odin ?
and the kernal when can flash it after or befor ?
Click to expand...
Click to collapse
When you find the threads containing stock ROMs, after making sure you're getting it for the correct device, you'll find full instructions. There's no point me duplicating them here.
attempt to KIES?
hi everbody
my question that i have galaxy 9100 with latest stock room 4.0.4 and i want use latest siyah kernel to avoid phone brick later if i want reset my phone later...i can use this kernel without root my phone? and wath about if a room update come later ?
thanks for you all
aboul7orouf said:
hi everbody
my question that i have galaxy 9100 with latest stock room 4.0.4 and i want use latest siyah kernel to avoid phone brick later if i want reset my phone later...i can use this kernel without root my phone? and wath about if a room update come later ?
thanks for you all
Click to expand...
Click to collapse
just flash Siyah kernel via Odin. You don't need root access to do that
Jokesy said:
just flash Siyah kernel via Odin. You don't need root access to do that
Click to expand...
Click to collapse
good but i found recovery version .. i can install it with factory recovery?
and this will no effect room update? i can update without any probleme? or reset?
aboul7orouf said:
good but i found recovery version .. i can install it with factory recovery?
and this will no effect room update? i can update without any probleme? or reset?
Click to expand...
Click to collapse
You need root access first before you can flash a kernel via recovery (factory recovery).
I'll advise you to just flash the kernel via Odin.
However, If you still want to use the recovery option I can post a link for you.
You can always flash updates via Odin. Much faster.
Jokesy said:
You need root access first before you can flash a kernel via recovery (factory recovery).
I'll advise you to just flash the kernel via Odin.
However, If you still want to use the recovery option I can post a link for you.
You can always flash updates via Odin. Much faster.
Click to expand...
Click to collapse
i will appreciate you .. ok post me a link for recovery root methode that compatible with siyah recovery version
thank you again for your hard work
aboul7orouf said:
i will appreciate you .. ok post me a link for recovery root methode that compatible with siyah recovery version
thank you again for your hard work
Click to expand...
Click to collapse
Visit this thread
I helped a guy solve similar issue.
All your questions would probably have been answered in that thread.
Good luck
Hey all.
After reading about the brickbug and failing the eMMC test, im a little confused as to the safest way to root and install a custom rom.
I am currently runnning ICS 4.0.3 with I9100TDULPB kernel on an aussie vodafone branded device.
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
I would also like to retain the option of flashing my carrier stock image incase of warranty purposes.
Cheers
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
Click to expand...
Click to collapse
Exactly !
PD: Remember to follow the installation instructions on the rom thread, otherwise u'll end in nasty bootloops
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
strokemesilly said:
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
Click to expand...
Click to collapse
yes, whenever u want to go back to complete stock, u just download ur stock firmware and flash it through odin
Awseome!
Thanks Poroto
please help i tried to install chainfire 3d drivers to my s3 jb 4.1.2 but later to my bad realised it was only for gb and now im stuck at the bootlogo nor do i have any rom files on my phone so i can flash the zip so i tried to push the files to my phone but it wont work either nor does sideload work i tried both with twrp and cwm but none worked please help............thank you
:crying::crying::crying::crying::crying::crying::crying:
Flash stock Rom with Odin and start afresh
zip to tar
slaphead20 said:
Flash stock Rom with Odin and start afresh
Click to expand...
Click to collapse
can i ask you a lame question, i have all my roms in.zip format and i toflash it through odin we need .tar
so to flash the zip i have to do nothing but chage it to .tar in the filename means if i have xxxxx.zip then shall i zip with xxxxx.tar
please help me for my silly question
:silly::silly::silly::silly::silly::silly::silly::silly::silly::silly::silly::silly: is what i am
please dont make your face on my question if i am wrong
drv.vyas27 said:
can i ask you a lame question, i have all my roms in.zip format and i toflash it through odin we need .tar
so to flash the zip i have to do nothing but chage it to .tar in the filename means if i have xxxxx.zip then shall i zip with xxxxx.tar
please help me for my silly question
:silly::silly::silly::silly::silly::silly::silly::silly::silly::silly::silly::silly: is what i am
please dont make your face on my question if i am wrong
Click to expand...
Click to collapse
No no no! You can get stock Roms(latest) from here, : don't use the leak, just find the latest firmware for your region
http://forum.xda-developers.com/showthread.php?t=1835931
[Leaked JB Firmware] I9300XXUFMB3 (4.2.1) - ODIN Firmware [23-02-13]
slaphead20 said:
No no no! You can get stock Roms(latest) from here, : don't use the leak, just find the latest firmware for your region
http://forum.xda-developers.com/showthread.php?t=1835931
[Leaked JB Firmware] I9300XXUFMB3 (4.2.1) - ODIN Firmware [23-02-13]
Click to expand...
Click to collapse
thanks but datafilehost is very irritating do you know any mirrors
:fingers-crossed::fingers-crossed::fingers-crossed:
thanks for your help:good::good::good::good::good::good::good:
you can always search for mirrors yourself if you know what you need, which you now do
drv.vyas27 said:
thanks but datafilehost is very irritating do you know any mirrors
:fingers-crossed::fingers-crossed::fingers-crossed:
thanks for your help:good::good::good::good::good::good::good:
Click to expand...
Click to collapse
go here and apply search in sammobile search engine and u will find ur stock rom
http://www.sammobile.com/firmwares/1/
good luck
im using a samsung gs2 and im already rooted ive read that i need to unroot and delete that cwm that ive downloaded lately..is there any way to do it?.. please help..
You need to unroot and revert to stock CWM inorder to do what? stock firmware upgrade?
WardenBerret said:
You need to unroot and revert to stock CWM inorder to do what? stock firmware upgrade?
Click to expand...
Click to collapse
im using ics and i wanna uodate it to official jb how can i revert it back bro?.
Hello,
Find your JB firmware from sammobile.com and flash it via Odin.
But don't forget to make a full wipe, before flashing anything.
WardenBerret said:
Hello,
Find your JB firmware from sammobile.com and flash it via Odin.
But don't forget to make a full wipe, before flashing anything.
Click to expand...
Click to collapse
no need to remove cwm and unroot?..
lalayea said:
no need to remove cwm and unroot?..
Click to expand...
Click to collapse
Nope. Automatic unroot if flashing a stock firmware
WardenBerret said:
Nope. Automatic unroot if flashing a stock firmware
Click to expand...
Click to collapse
so i dont need to unroot it?..just wipe everything?..
He already answered your question:-
You - 'no need to remove cwm and unroot?..'
WB - 'Nope. Automatic unroot if flashing a stock firmware'