I bricked my i9100m. Please help!!
So, I was fooling around with flashing a modem in Odin and it failed. My phone ended up saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when I try to go into recovery mode.
I can get into download mode, but when I tried to flash stock firmwares each one failed. I did flash multiple different kernels too. They get rid of the message above, but then it's stuck in boot screen with a yellow triangle.
I was running the leaked 4.1.2 official rom rooted and deodexed before I bricked it. My phone is a Bell Mobility phone from Canada Model i9100M.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't knwo what else to try. Please help. I just want my phone to work again.
UPDATE!
I fixed it. For some reason the same process worked on my laptop and not my desktop.
T12UNK5 said:
I bricked my i9100m. Please help!!
So, I was fooling around with flashing a modem in Odin and it failed. My phone ended up saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when I try to go into recovery mode.
I can get into download mode, but when I tried to flash stock firmwares each one failed. I did flash multiple different kernels too. They get rid of the message above, but then it's stuck in boot screen with a yellow triangle.
I was running the leaked 4.1.2 official rom rooted and deodexed before I bricked it. My phone is a Bell Mobility phone from Canada Model i9100M.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't knwo what else to try. Please help. I just want my phone to work again.
Click to expand...
Click to collapse
Your device was never "bricked".
Related
Hi to all.
I have a galaxy gt i9100 an 4.0.3 on it. I flashed siyah kernel 5.0.1 with odin and no my phone does not boot. Its stock on screen displaying Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
I try to flash rom I9100XWLS8 with odin and i only get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I can`t flash anything with odin. pls help me.
Sorry for my english.
Re: [Q] Firmware upgrade encountered and issue
What state is the phone in now. What modes can you access?
Sent from my GT-I9100 using xda premium
Its stuck on screen displaying Firmware upgrade encountered and issue. I can access only download mode.
Re: [Q] Firmware upgrade encountered and issue
And your phone is no longer recognised by odin?
Sent from my GT-I9100 using xda premium
Odin is recognising my phone, but when i try to flash a rom i get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Re: [Q] Firmware upgrade encountered and issue
Ok re download the rom from samfirmware and try again. Not sure if it's a single PDA file or several CSC modem etc. Reflash.
Sent from my GT-I9100 using xda premium
I tried but i only get Complete(Write) operation failed
YUPEEEEEE:victory::victory::victory::victory::victory:
I got it.
I downloaded odin 1.3 and flashed successfully my phone.
Here is odin 1.3 if someone needs it.
View attachment Odin3_v1.3.rar
Well done mate.
Sent from my GT-I9100 using xda premium
HaHa congrats
I have tried everything posted above
In addition my model is GT-I9100G
doesnt go to download mode or recovery mode (earlier it was)
Earlier i was facing an issue that whenever i start it....it displayed "CWM 6.0.3.2" "WARNING : No file_contexts"
Please help
I'm getting the same problem on my sm-g318h trend 2 lite but it doesn't get fixed like his.
Hi, I followed everything in the how to get root video on the Galaxy S4, but when I tried to flash it to the 423399 kernal (so I can eventually obtain root), it failed. No I am stuck. I can only get to the odin download screen and if I just try to boot it normally it goes to the firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. When I reboot into Odin download, its connected and I load the 423399 into PDA then Start. Here's what I get.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MD2_423399_Kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know why but it keeps Removing. I am no longer getting a blue load bar under the Downloading... Do not turn off target!!
I can not get into recovery mode either.
Any help would be much apprectiated!
I tried the "Unbrick method" by flashing the stock restore. Didn't work.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PaulJ69 said:
I tried the "Unbrick method" by flashing the stock restore. Didn't work.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
is usb debugging turned on on the phone?
theidoctor said:
is usb debugging turned on on the phone?
Click to expand...
Click to collapse
He said he can't get his phone to load so therefore he can't enable USB debugging. I sent you some info to try and assist you. Message me back if you need anything.
So after trying a ton of different things and kept getting the same
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
I figured it was something on my end removing the connection. I took out the USB cable and plugged it directly into the back of the motherboard and Bingo! it worked!
Thanks again DarkMenace for sticking it out with me!
PaulJ69 said:
So after trying a ton of different things and kept getting the same
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
I figured it was something on my end removing the connection. I took out the USB cable and plugged it directly into the back of the motherboard and Bingo! it worked!
Thanks again DarkMenace for sticking it out with me!
Click to expand...
Click to collapse
Anytime.
Sent from my Rooted Verizon Samsung Galaxy S4 using xda premium
Hello,
My wife has this phone and the phone accidentaly turned off and after that he was not able to boot. It was stucked on samsung logo. I tryied recovery mode and wipe phone, but it not helped. After that phone started stucking on galaxy S2 logo (before samsung logo). I was able only to go into download mode. I tried to follow this guide: wccftech.com/install-latest-android-412-jelly-bean-galaxy-s2-i9100-official-firmware but in odin (v3.07) it failed after some time (while progress bar is not moving from beginning, I see only one px of it). And now phone is showing message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Please can you help me how can I recover phone back? thanks a lot for any help
it is czech version bought in samsung shop. So I downloaded XEZ-I9100XWLSD-20130301125313 (but I am not totaly sure about version, this should be for czech)
On load PDA
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100XEZLS1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
After press Start
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
After some time
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dawee said:
Hello,
My wife has this phone and the phone accidentaly turned off and after that he was not able to boot. It was stucked on samsung logo. I tryied recovery mode and wipe phone, but it not helped. After that phone started stucking on galaxy S2 logo (before samsung logo). I was able only to go into download mode. I tried to follow this guide: wccftech.com/install-latest-android-412-jelly-bean-galaxy-s2-i9100-official-firmware but in odin (v3.07) it failed after some time (while progress bar is not moving from beginning, I see only one px of it). And now phone is showing message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Please can you help me how can I recover phone back? thanks a lot for any help
it is czech version bought in samsung shop. So I downloaded XEZ-I9100XWLSD-20130301125313 (but I am not totaly sure about version, this should be for czech)
On load PDA
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100XEZLS1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
After press Start
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
After some time
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Seems like you have brick bug but I have no idea how to fix it.
Next I have tried to follow this guide: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
I am not totaly sure about kernel version, but because this phone was pursached on his release, I have downloaded GINGERBREAD VERSION. I have tried to flash it but without success too. Green progress bar is moving to the end and after some time it writes "fail"
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Kernel_I9100XXKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> zImage
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried rooting my phone, stuck on startup screen and download mode.
Didn't work so I am now trying to install stock firmware.
When in Odin3, there are different things that happen. It says "Added!!" Sometimes I get stuck at setupconnection, but other times it initializes and i get a nand write start fail.
I am using Odin3 v3.10.6
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also get this failure sometimes
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FTEF1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
SM-G925F
I have already tried different USB ports, different cables
I can't restart because on the boot screen i get a "recovery is not seandroid enforcing" message.
I'm having the same issue with a non-edge S6, did you find a way to solve it? How did you solve it?
how long does it take normally to flash a rom? I'm trying to flash a stock rom from a hard brick and my odin just sits at setup connection and doesn't move and doesn't get an error either.
If it is hard bricked then nothing short of a jtag will save it.
Hi
i updated my S III with stock firmware with 4.3 (I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5) via Odin. It was successful and worked fine for a few days, but after 3 or 4 days my phone get stucked on Samsung logo screen, i tried wiping data and cache from recovery, but problem is same. So i am trying to re flash my phone with same stock rom. But i am not able to do it.
I am using Odin 3.07,
Here is the Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I also used to Root it with cf auto root,
Here is the Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Tried using different USB ports and USB cables?
audit13 said:
Tried using different USB ports and USB cables?
Click to expand...
Click to collapse
Yes Tried, Recently my S III was updated via same port and USB Cable,
Have you tried flashing the stock ROM with a pit file?
It's also possible that the internal memory chip is damaged.
audit13 said:
Have you tried flashing the stock ROM with a pit file?
It's also possible that the internal memory chip is damaged.
Click to expand...
Click to collapse
Yes I tried, Here is result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
Stuck on Get PIT for mapping,
Since it is stuck on the pit file, this leads me to believe that the cable is not compatible or the internal memory is damaged.
I have flashed many different Samsung phones over several years and I find that USB cables can cause the flash to fail when Odin is trying to read the partition information (PIT), flash a bootloader, or flash the system image.