[Q] Lost 3g after upgrade firmware - HTC EVO 3D

Hi guys,
Hope someone can help me out on this.
I have unlook and s-off my htc evo 3d to upgrade the firmware (to 11.77.3504.00P_11.25.3504.06_M from official release 3.28.707).
However, after I have done the upgrade, my phone no longer have 3g data any more (still can make phone calls and connect to wifi), no matter what rom I flash into.
Anyone had similar problems before?
Thank you

fireofnight said:
Hi guys,
Hope someone can help me out on this.
I have unlook and s-off my htc evo 3d to upgrade the firmware (to 11.77.3504.00P_11.25.3504.06_M from official release 3.28.707).
However, after I have done the upgrade, my phone no longer have 3g data any more (still can make phone calls and connect to wifi), no matter what rom I flash into.
Anyone had similar problems before?
Thank you
Click to expand...
Click to collapse
Two things.
1. do ##DATA# and enter edit mode, enter MSL and select profile. Click menu/reset profile. Phone will reboot and do a handsfree activation. THat should solve it.
2. If it doesn't work, call sprint and have them reprovision your phone.

I believe he is gsm. But your suggestion should work for him anyways. He would just have to call his carrier if the first suggestion didn't work.

Related

gsm error

Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now" . O2 say pc monitor is a software package for checking the system, Not for use by the public,!! (send your XDA to us we want your hard earned cash) or can anyone direct me to a gsm rom download so i can flash my XDA.
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
GSM ERROR
I have this problem too, HOW do I ?
read this
?
http://wiki.xda-developers.com/index.php?pagename=Wallaby

Atrix keeps restarting when making a phonecall

ok this phone a brand new, i can receive calls and text but when i dial a number and try to make a call the phone restarts
This is factory unlocked and not rooted
Try flashing a newer radio rom.
I dont want to root it incase i cant get the original rom back.
It is weird as, i have tried with every sim card to make calls and it works but when i put the 3 sim in does plays up
We experienced the same issue on some Turkish networks as well and flashing a newer radio rom fixed the problem. Flashing roms and rooting are totally different. What you need is a newer version of your current baseband ( radio rom ) sbf and official motorola software flasher " RSD Lite 5.3 "
Hope it helps.
Thank you so much for that Semseddin.
My problem solved, i just flashed it using RSD lite 4.9
Thanks everyone
Hi. I've been having the exact same issue. I've got an unlocked AT&T Atrix and I'm trying to use a Three UK sim (I'm in the UK). I'm a bit new to the world of android, can someone post a link to an appropriate Radio Rom?
Thanks for any help!!
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Why is it always 3 that cause a problem?
When the Nokia N900 came out, that wouldn't work with 3 initially until a couple of updates later!
lowndes783 said:
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Click to expand...
Click to collapse
May not work for Pay as you go? I didn't think that it had 2G fall back?

[Q] No 3G/MMS/Internet on MetroPcs after flash

Hey..After getting my esn added I can't seem to get the apn settings to stick.I do have talk & text but no internet whatsoever.I would really appreciate some help if somebody is willing to lend a helping hand..Thanks
Seems like there's no one with a photon on metro
I am also on Metro with text,talk,3G. But no MMS yet (I don't use it as much anyway).
Follow this link see if you can get your 3G to work.
http://forum.xda-developers.com/showthread.php?p=8395950#post8395950
There are differences in getting Photon to work with 3G. So some of the steps indicated in the above link are different. And I assume that you know how to get your MSL number. Here are the differences:
1. You don't need HTC diag drivers. This should be Motorola driver.
2. In order to get to diag mode. You need to boot into boot loader and choose BP tools
3. You will need to get QPST_2.7_366
4. Once you got everything:
follow step 9 - 28. However at step 22, instead of choosing "Simple IP", you want to choose "MOB+Simple IP". Otherwise 3G will not work.
Once done you should have 3G. However there is an annoying error Mobile IP Registration will be in your notification (ignore this, it does not matter).
Finally!!! I got it to work.I wasn't changing the spc code that's why it was giving me a problem.Thanks man & as soon as I figure out this mms thing imma let u know
Have you been able to get mms? if so, will you explaing how? thanks...
eltano07 said:
Have you been able to get mms? if so, will you explaing how? thanks...
Click to expand...
Click to collapse
Are you on a custom rom?
I have mms working fine sending and receiving on AOKPCB
GhostxLawliet said:
Are you on a custom rom?
I have mms working fine sending and receiving on AOKPCB
Click to expand...
Click to collapse
Can you please help me a little more about that...how to get the custom rom you mentioned for example, also how to install it would me helpfull...will I loose all my info when doing it? THANKS IN ADVANCE...
eltano07 said:
Can you please help me a little more about that...how to get the custom rom you mentioned for example, also how to install it would me helpfull...will I loose all my info when doing it? THANKS IN ADVANCE...
Click to expand...
Click to collapse
I pm'd you
I'm having trouble programming the phone.I started up my phone in bp tools but my phone doesnt seem to show up.
Is there certain drivers im suppose to install? i used the drivers from the main site because i couldn't find any other place to dl the drivers.
Are you on a gingerbread ROM ? If not then you should be.Double check your drivers & see if the phone pops up under ports in device manager.Once it shows up & gives you a port number then its a go.QPST & CDMA workshop is all you need
Im currently running cm7 and its on 2.3.7
In ports i see motorola QC Diag Port (COM8)
When i connect to COM8 with cdma workshop it becomes unresponsive (crash?)
connecting through qpst i see COM8 also but it reads as no phone.
Also thank you for your help so far!
U need to be on a blur ROM or else CDMA WS is gonna be unresponsive.Use rocko rom or any blur rom then retry
My mopho doesnt seem to pick up on metropcs i did the above and had my esn added to metro
not sure what went wrong.
EDIT: i got my internet working through dfs using the provision settings up top but my phone calls and text aren't sending/recieving
any luck with mms with aokp 4.0?

[Q] Can't Make Calls, But Have 4G LTE Data

Here's my story: About a year and a half ago, I used my phone upgrade on a Droid DNA, but swapped back to my old flip phone to avoid having to pay $30 for Data and just keep the phone for the Wi-Fi access and other epicness. About a year ago, I decided to try out beaups' Moonshine s-off so I could start putting custom ROMs on it. Unfortuately with my luck (probably bumped the cable) it failed halfway through the moonshining process and made my phone really glitchy with force closes (and deleted all my data, but meh..). Fortunately, I went to the Moonshine IRC and they were so Awesome! They helped me troubleshoot my issue, guided me though making an Ubuntu Live CD, and used TeamViewer to get my phone back in working order. I will always be extremely grateful for their help!
Fast forward to today: I finally decide I want to go for the data plan, so I call up Verizon and go through the process of getting the phone service back on my Droid DNA. Unfortunately, after the whole process, the phone won't make any outgoing calls or receive any incoming calls. However, I still had 3-4 signal bars and I could surf the internet on '4G LTE'. I figured the ROM I had installed was no good, so I tried out 3 other ROMs and all of them had the same issue. I decided I would restore the phone to my first TWRP backup (from right after we solved the Moonshining issue), however even that gave me the same results.
TL;DR - I am rooted with s-off. I cannot make outgoing calls or receive incoming calls, however strangely enough I have 4G Data.
Under 'Phone Identity' in the settings, the Model Number, IMEI, Device serial number, SIM ID, MEID, and IMSI numbers all show up. But the Phone number only shows "0000000000".
I assume that the issue was always there after I had done the moonshining, but never encountered it until I decided to actually use it as a phone.
I'm not sure what I should try from here. Any help or assistance you can give me is greatly appreciated, and Thank you!
I would call Verizon. Sounds like something on their end. Have them reset your network. Try to take out the sim and reinsert.
HTC DNA
LG Optimus G
Unfortunately, that's not it. I went through the whole process of getting the phone service back on my Droid DNA up to level 2 support.
Sounds like the radio is messed up. 4G is data only, the partition for voice and sms is 1xRTT or EVDO. Back everything up to your PC and run an ruu, then after the ruu completes, run "factory data reset" from bootloader. That should hopefully fix your radio issue.
Be warned! Ruu will erase everything on your phone and return it to stock (you will keep unlock and s-off though, so you can flash custom recovery and flash your Rom again). You could try to restore your nandroid, but it may screw up your radio again.
Sent from my HTC6500LVW using XDA Free mobile app
Uzephi said:
Sounds like the radio is messed up. 4G is data only, the partition for voice and sms is 1xRTT or EVDO. Back everything up to your PC and run an ruu, then after the ruu completes, run "factory data reset" from bootloader. That should hopefully fix your radio issue.
Be warned! Ruu will erase everything on your phone and return it to stock (you will keep unlock and s-off though, so you can flash custom recovery and flash your Rom again). You could try to restore your nandroid, but it may screw up your radio again.
Sent from my HTC6500LVW using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for the delay. I actually hadn't tried an RUU yet, so I got the '3.06.605.4' Sense 5 one from here http://forum.xda-developers.com/showthread.php?t=2612740 and tried running it on my Windows 7.
Unfortunately it didn't work and gave me a message saying:
"ERROR [158]: IMAGE ERROR
The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again."
I actually think the drivers may be messed up on that computer (adb and HTC Sync won't see the phone connected, but sometimes I can transfer files). I have a new windows 7 computer that I've never used before, but I can't seem to find the right drivers/tools that I would need for the RUU to work properly this time. Would you happen to have links to them, per chance?

[How To] fix Sprint HTC one max weird no 3G issue after gsm flash

Hi all I recently tried to flash my HTC one max to gsm from sprint only to deside to keep it on sprint. The problem I was running into was there was no 3G/talk text signal at all and I tried just about everything I could think of. So long story short this is to try and help anyone else with the same issue.
1) go to the dial pad
2) type in
*#*#7780#*#*
This will prompt you for a factory reset, (which unlike doing a hard reset actually fix the problem) do it and it will reboot into recovery (for me TWRP which does absolutely nothing) I rebooted and it did the hands free activation! And all was well after that. If you have any questions feel free to pm me

Categories

Resources