Hello guys.
I am new here.
So i have Sony Xperia Neo V and i tried to flash some roms from here.
I did unlock bootloader officially. The easy way.
After that, i managed to flash a kernel via flashtool. Root and CWM installed as well.
I downloaded and flashed a miui rom for neo v, followed instructions (full wipe,cache,dalvik). The result: got stucked on the Sony logo screen.
I waited for like 15 minutes but nothing happened. Then i tried to boot on cwm in order to flash again or flash some other roms but i couldn't. I tried all the combination keys but i was unable to boot on cwm.
After official unlocking BL, seus won't let me update to factory settings.
So i tried to flash other files(custom and official kernels sony provided) with no success. It got stuck on flashtool at ~8% the first time.
After that nothing. Literally. No sony logo, no boot.
I can connect on flash mode (green led) but i can't do anything else.
I strongly believe that my phone is bricked now.
Is there any way to do something to unbrick?
P.S. 1 I tried FOTA unbrick tool but nothing.
P.S. 2 Sorry for my bad grammar.
Thanks in advance
Try to flash the stock ftf using flashtool!
Or else use SEUS!
That can UNbrick your phone!
Or
Flash custom kernel like
Suave, alliance,super stock,etc
Flash kernel like these via fastboot mode, not via flashtool flashmode!
That has cwm inbuilt ....and you can access recovery mode by pressing vol down button repeatedly!
Sent from my MT11i using xda premium
Which miui rom did you choose?
Was it a miui rom that works with stock kernel or a rom that requires a custom kernel?
My mistake was that i was trying on flashmode not fastboot.
So now I flashed Suave kernel and GB rom. It finally booted ))
Now i'm going to be more carefull.
Thanks to you guys.
maldino said:
My mistake was that i was trying on flashmode not fastboot.
So now I flashed Suave kernel and GB rom. It finally booted ))
Now i'm going to be more carefull.
Thanks to you guys.
Click to expand...
Click to collapse
Btw you made a mistake!
Suave is an Ics kernel
So use that kernel along with Ics Rom not GB good luck!
Sent from my MT11i using xda premium
Ghostfreak NB said:
Btw you made a mistake!
Suave is an Ics kernel
So use that kernel along with Ics Rom not GB good luck!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I'm going to flash other roms. The point is that phone works now.
maldino said:
I'm going to flash other roms. The point is that phone works now.
Click to expand...
Click to collapse
Then it's fine!
Just gave my 2 cents!
GB kernel --GB Rom
And likewise!
Sent from my MT11i using xda premium
Related
Hello, I'm using nAa kernel v011 & MiniCM 2.2.0, I wanted to revert back to stock 2.1, I tried SEUS and seus say my phone has the latest update installed, and there is just an exit button, can some1 help me? I tried flashing stock kernel and use SEUS but still ended with the same result
Sent from my E10i using XDA
It is always suggested to take a backup of stock rom before installing any custom rom..have you taken any backups?
I did not make a backup when I flashed custom roms because I was a complete noob and I just flash a custom rom. Btw thanks for your reply.
Sent from my E10i using XDA
Download any rom for ur device which completely works with stock kernel....
Then 1st do necesary wipes
Install custom rom
Flash stoock kernel...
Boot. Properly
And then try with pc companion or SEUS
But if I'm using a custom kernel and if I flash a rom that is compatible with stock kernel wont recovery will say incompatible kernel found? I've tried that before.
Sent from my E10i using XDA
Dude I mean a rom which is compatible wit both stock kernel and custom kernel
Well then can you tell me which rom is compatible with both kernel please? Thank you
Sent from my E10i using XDA
lthy31 said:
Well then can you tell me which rom is compatible with both kernel please? Thank you
Sent from my E10i using XDA
Click to expand...
Click to collapse
the thread which you want to download a custom rom always clearly stated the kernel to use with the rom
sahniana said:
the thread which you want to download a custom rom always clearly stated the kernel to use with the rom
Click to expand...
Click to collapse
That means I have no hope already? Sad
Sent from my E10i using XDA
lthy31 said:
That means I have no hope already? Sad
Sent from my E10i using XDA
Click to expand...
Click to collapse
u have already installed naa kernel, meaning that you have unlocked bootloader. this article said that you can update through SEUS if you have unlocked the bootloader. i'm not experienced with x10mp bootloader issue before this but my gtab7 experienced bootloader problem after unlocked,flash the stock bootloader and solved the problem.
but you said that you have flash the stock kernel and still cant install through seus. why dont you try to reinstall seus,mybe something wrong with it. and btw,did you manage to flash stock kernel successfully?
sahniana said:
u have already installed naa kernel, meaning that you have unlocked bootloader. this article said that you can update through SEUS if you have unlocked the bootloader. i'm not experienced with x10mp bootloader issue before this but my gtab7 experienced bootloader problem after unlocked,flash the stock bootloader and solved the problem.
but you said that you have flash the stock kernel and still cant install through seus. why dont you try to reinstall seus,mybe something wrong with it. and btw,did you manage to flash stock kernel successfully?
Click to expand...
Click to collapse
Yeah I successfully flashed stock kernel, I'll try reinstalling seus, thanks
Sent from my E10i using XDA
Hello, i'm trying install custom roms MiniCM7-2.2.0 but when i install it, the phone reboot and only show sony ericsson and doesn't boot. I cant access to xrecovery. Whats wrong?
tomaskun said:
Hello, i'm trying install custom roms MiniCM7-2.2.0 but when i install it, the phone reboot and only show sony ericsson and doesn't boot. I cant access to xrecovery. Whats wrong?
Click to expand...
Click to collapse
You don't using nAa kernel right? To use Mini-cm7 2.2.0 you must use naa kernel
Sent from my U20i using xda premium
Like Elwino2.3 said you need to flash the nAa kernel using flashtool.
But before that you need to unlock your bootloader than flash the kernel.
Please re-read the thread carefully where you got the MiniCm7-2.2.0 ROM.
All necessary details are provided.
Don't worry it also happened to me. I got too confident coz i had flashed many other ROM's and so i just flashed the ROM without reading the instruction.
You either use Sony Ericsson Update Service to reset your phone back to the stock sony ericsson rom or you can try to directly flash the kernel.
As for myself i used the Update Service coz i thought that it was more safe.
tomaskun said:
Hello, i'm trying install custom roms MiniCM7-2.2.0 but when i install it, the phone reboot and only show sony ericsson and doesn't boot. I cant access to xrecovery. Whats wrong?
Click to expand...
Click to collapse
follow this http://forum.xda-developers.com/showthread.php?t=981935
after that, flash the kernel.. install rom via cwm
Your device is brick, you dont use the kernel try to unbrick the device and install the right kernel with the CWM recovery
Sent from my E10i using xda premium
now i use custom rom GB
can i install custom rom ICS?
or must upgrade stockrom to ICS then Flas custom rom ICS
plz answer me
sorry my english is bad
Better First upgrade to ics. Is your Bootloader unlocked?
Otherwise you will have to use local prop method. Check out my signature there's a rooting guide. In the guide there's how to root 4.1.B.0.431 and there's the Link to DragonClawsAreSharp's great tutorial
Sent from my SK17i using xda app-developers app
mihahn said:
Better First upgrade to ics. Is your Bootloader unlocked?
Otherwise you will have to use local prop method. Check out my signature there's a rooting guide. In the guide there's how to root 4.1.B.0.431 and there's the Link to DragonClawsAreSharp's great tutorial
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
my phone is unlocked bootloader
thankyou :laugh:
If your Bootloader is unlocked you needn't do the procedure in the tutorial, just Flash the ics Firmware ftf via flashtool and Flash a custom ics Kernel, for example rage Kernel for 4.0.4. After that install the custom rom
Sent from my SK17i using xda app-developers app
mihahn said:
Better First upgrade to ics. Is your Bootloader unlocked?
Otherwise you will have to use local prop method. Check out my signature there's a rooting guide. In the guide there's how to root 4.1.B.0.431 and there's the Link to DragonClawsAreSharp's great tutorial
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
mihahn said:
If your Bootloader is unlocked you needn't do the procedure in the tutorial, just Flash the ics Firmware ftf via flashtool and Flash a custom ics Kernel, for example rage Kernel for 4.0.4. After that install the custom rom
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
ok. flash ics with wipe cache? or wipe all
thankyou....:laugh:
newzadd said:
ok. flash ics with wipe cache? or wipe all
thankyou....:laugh:
Click to expand...
Click to collapse
Just flash it with wipe all, but before do a backup using for example titanium backuü. Wipe all and exclude nothing.
After flashing plug off, let phone turned off, hold volume up and connect to pc, flash a rooted kernel (like I said for example rage kernel for 4.0.4) and boot up. Enable usb debugging and unknown sources and msc mode (not necessary just for sure), push the rom installation zip to sd card and shut down.
Flash the recommend kernel and boot in cwm. See what has to be formatted/wiped and after that install the rom.
Reboot and enjoy
mihahn said:
Just flash it with wipe all, but before do a backup using for example titanium backuü. Wipe all and exclude nothing.
After flashing plug off, let phone turned off, hold volume up and connect to pc, flash a rooted kernel (like I said for example rage kernel for 4.0.4) and boot up. Enable usb debugging and unknown sources and msc mode (not necessary just for sure), push the rom installation zip to sd card and shut down.
Flash the recommend kernel and boot in cwm. See what has to be formatted/wiped and after that install the rom.
Reboot and enjoy
Click to expand...
Click to collapse
thank you very much !! it work!!
i have on question i use ICS rom 4.1.B.0.431
can i install custom rom base on 4.1.B.0.587 ?
newzadd said:
thank you very much !! it work!!
i have on question i use ICS rom 4.1.B.0.431
can i install custom rom base on 4.1.B.0.587 ?
Click to expand...
Click to collapse
Yes, but .587 isn't released for xperia mini pro and the other devices. Only a few have got the update right now, but if there's a custom rom based on it for your device it should work...
Btw hitting thanks woule be nice
mihahn said:
Just flash it with wipe all, but before do a backup using for example titanium backuü. Wipe all and exclude nothing.
After flashing plug off, let phone turned off, hold volume up and connect to pc, flash a rooted kernel (like I said for example rage kernel for 4.0.4) and boot up. Enable usb debugging and unknown sources and msc mode (not necessary just for sure), push the rom installation zip to sd card and shut down.
Flash the recommend kernel and boot in cwm. See what has to be formatted/wiped and after that install the rom.
Reboot and enjoy
Click to expand...
Click to collapse
mihahn said:
Yes, but .587 isn't released for xperia mini pro and the other devices. Only a few have got the update right now, but if there's a custom rom based on it for your device it should work...
Btw hitting thanks woule be nice
Click to expand...
Click to collapse
.587 isn't released for xperia mini pro how can i update
please give me link
(sorry my english is bad)
newzadd said:
.587 isn't released for xperia mini pro how can i update
please give me link
(sorry my english is bad)
Click to expand...
Click to collapse
You can't Update until Sony hasn't released it. If your bootloader is Locked you can connect to pc companion and it'll find the Update, but it has to be released First. You will have to wait
Sent from my SK17i using xda app-developers app
mihahn said:
You can't Update until Sony hasn't released it. If your bootloader is Locked you can connect to pc companion and it'll find the Update, but it has to be released First. You will have to wait
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
thank you sir; now i can install custom rom ICS .587 on base .431 already
thank you very much:laugh:
hi friends.My NEO V is on 2.3.4 with software version 4.0.2.A.0.62.I unlocked bootloader and rooted my mobile successfully.I tried to flash an ics rom(xperia ultimate HD).I did flash it using aroma.When i tried to reboot phone it got struck at sony logo.I'm not able to enter recovery to restore my backup.Do i need to update my firmware version to .587 before flashing ics rom.If so how to do it?please help me..
dileepm29 said:
hi friends.My NEO V is on 2.3.4 with software version 4.0.2.A.0.62.I unlocked bootloader and rooted my mobile successfully.I tried to flash an ics rom(xperia ultimate HD).I did flash it using aroma.When i tried to reboot phone it got struck at sony logo.I'm not able to enter recovery to restore my backup.Do i need to update my firmware version to .587 before flashing ics rom.If so how to do it?please help me..
Click to expand...
Click to collapse
Mate
You should have flashed an Ics fw atleast
Before flashing an Ics Rom
Anyways flash. 587 fw using flashtool
Then root it using doomLord's kit
Refer to Madfysh's thread
Also then before installing Rom
Flash a custom kernel
As in that you get cwm in built
Then do all wipes
Format system format data
Is also needed
Then install Rom
Follow instructions in Aroma!
Done
Sent from my MT11i using xda premium
dileepm29 said:
hi friends.My NEO V is on 2.3.4 with software version 4.0.2.A.0.62.I unlocked bootloader and rooted my mobile successfully.I tried to flash an ics rom(xperia ultimate HD).I did flash it using aroma.When i tried to reboot phone it got struck at sony logo.I'm not able to enter recovery to restore my backup.Do i need to update my firmware version to .587 before flashing ics rom.If so how to do it?please help me..
Click to expand...
Click to collapse
You need an ics kernel. You were on gb and with your new rom you are on ics.
Your bootloader is unlocked so flash a ics kernel. There a plenty to choose from. For example stock, advanced stock, suave or night elf.
Flash the kernel and your phone will boot. Look if it functions well, otherwise install the Rom again.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
motorazrv3 said:
You need an ics kernel. You were on gb and with your new rom you are on ics.
Your bootloader is unlocked so flash a ics kernel. There a plenty to choose from. For example stock, advanced stock, suave or night elf.
Flash the kernel and your phone will boot. Look if it functions well, otherwise install the Rom again.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
Click to expand...
Click to collapse
I cannot boot into recovery by pressing volume down button repeatedly.How to flash kernel?
dileepm29 said:
I cannot boot into recovery by pressing volume down button repeatedly.How to flash kernel?
Click to expand...
Click to collapse
Flash kernel through fastboot mode
There's a thread in sticky section
Have a read before flashing!
Also read thread of kernel you've chosen to flash!
And to enter into fastboot mode
You've to press menu button at right side beside home key and plug usb into pc holding that button
Sent from my MT11i using xda premium
Ghostfreak NB said:
Flash kernel through fastboot mode
There's a thread in sticky section
Have a read before flashing!
Also read thread of kernel you've chosen to flash!
And to enter into fastboot mode
You've to press menu button at right side beside home key and plug usb into pc holding that button
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I flashed ics kernel and then i'm able to boot into recovery.i flashed rom again and it worked thank a lot
i have tried to flash several roms. i unlocked the bootloader with flashtool and installed bussybox and root. but when i try to flash a rom and install it i get stock at the loading screen. i installed Naa kernel. so i really dont now what to do now.
dgaa1991 said:
i have tried to flash several roms. i unlocked the bootloader with flashtool and installed bussybox and root. but when i try to flash a rom and install it i get stock at the loading screen. i installed Naa kernel. so i really dont now what to do now.
Click to expand...
Click to collapse
seems u didnt flashed the kernel properly
and which kernel u flashed ?
p.s.
u posted in wrong section
Sent from my U20i using Tapatalk 2
i did use U20_nAa-jb-03_2.6.29.6-nAa-jb-03
dgaa1991 said:
i did use U20_nAa-jb-03_2.6.29.6-nAa-jb-03
Click to expand...
Click to collapse
did u tried repairing it back via sony companion ?
and which rom did u used ?
Sent from my U20i using Tapatalk 2
AW: Cant start my phone after flashing....
Have u wipe data and cache? If not, Boot into recovery and Marke the wipes. than restart again.
Sent from my U20i using xda app-developers app
Brother, you flashed a jelly bean kernel so you can just run CyanogenMod10 based roms(android 4.1.2 roms)
If you're going to flash a gingerbread rom(CyanogenMod7) (android 2,3) you must use a gingerbread kernel like : "nAa 14 gingerbread for x10mini"
Good Luck
sent via ULTIMATE GB beta