Hey all, this is my first android and I'm not the smartest sometimes. I tried restoring back to factory rom, and watched a bad how to vid. Basically i cleared data, system, cache and now realize i shouldn't have.
I'm not able to connect to the phone through usb. I have the drivers, but I can't see the phone.I can boot into cwm, and that is it. When i start it, it basically pulls up the LG screen, then a black screen.
I have a backup on cwm but get the md5 error.
Is it possible to put the sd card in my computer and download what i need straight to the card? Im also not sure what i need to download, if that does work.
Please let me know if there is any other info I can provide. Like i said im not the smartest sometimes, so dont be afraid to respond like im slow.
Cat Rancher said:
Hey all, this is my first android and I'm not the smartest sometimes. I tried restoring back to factory rom, and watched a bad how to vid. Basically i cleared data, system, cache and now realize i shouldn't have.
I'm not able to connect to the phone through usb. I have the drivers, but I can't see the phone.I can boot into cwm, and that is it. When i start it, it basically pulls up the LG screen, then a black screen.
I have a backup on cwm but get the md5 error.
Is it possible to put the sd card in my computer and download what i need straight to the card? Im also not sure what i need to download, if that does work.
Please let me know if there is any other info I can provide. Like i said im not the smartest sometimes, so dont be afraid to respond like im slow.
Click to expand...
Click to collapse
Can you install the Rom "The base .5". I assume so if you can get to cwm. I had this problem when flashing this Rom The first time. It did the same thing with the LG logo then go black. If that happens just reboot to cwm(May take awhile) and reflash "the base" again. That should allow it to boot the phone fully so you can at least use it till you can get all the way back to stock. I hope this helps. I have to crash now tho. I'll check back in the morning to see how it's going.
Sent from my UNLOCKED LG-E970 using xda premium
Are you trying to get back to factory settings or just get your phone running with the stock rom?
You should be able to just put the ROM on your sd card via computer if you have an SD card sleeve.
If you wiped your phone, it's my understanding that you're not supposed to when flashing the provided rom in development.
There's a posting in development, I believe, about restoring your phone to stock if you messed it up. LGNST or something.
Cat Rancher said:
Hey all, this is my first android and I'm not the smartest sometimes. I tried restoring back to factory rom, and watched a bad how to vid. Basically i cleared data, system, cache and now realize i shouldn't have.
I'm not able to connect to the phone through usb. I have the drivers, but I can't see the phone.I can boot into cwm, and that is it. When i start it, it basically pulls up the LG screen, then a black screen.
I have a backup on cwm but get the md5 error.
Is it possible to put the sd card in my computer and download what i need straight to the card? Im also not sure what i need to download, if that does work.
Please let me know if there is any other info I can provide. Like i said im not the smartest sometimes, so dont be afraid to respond like im slow.
Click to expand...
Click to collapse
The recovery won't generate a md5 sum (known bug). You have to generate it yourself. Connect your phone to adb and go to #4 in the FAQ here.http://forum.xda-developers.com/showthread.php?t=2006946
Note that there is no way to tell of the backup is corrupt since you are generating a valid code regardless of integrity.
Sent from my LG-E970 using xda premium
Murasakiii said:
Are you trying to get back to factory settings or just get your phone running with the stock rom?
You should be able to just put the ROM on your sd card via computer if you have an SD card sleeve.
If you wiped your phone, it's my understanding that you're not supposed to when flashing the provided rom in development.
There's a posting in development, I believe, about restoring your phone to stock if you messed it up. LGNST or something.
Click to expand...
Click to collapse
I tried re-installing .4 base which is what I had originally used. It let me choose the apps to instal, and made it to the "X" screen, but appeared to be stuck in a boot loop. I am going to try and download and install .5 via the sd card and see if that works. I'm not sure if LGNPST will work since I can't see the phone via usb. I will download it and give it a try though.
I also saw the guide in the general Optimus G forums for unbricking it.
http://forum.xda-developers.com/showthread.php?t=2010624
Since i cant really connect via usb, ill probably have to use a different method. Im hoping the usb issue is due to the computer im using and the original computer i used to root and unlock will work.
Cat Rancher said:
I tried re-installing .4 base which is what I had originally used. It let me choose the apps to instal, and made it to the "X" screen, but appeared to be stuck in a boot loop. I am going to try and download and install .5 via the sd card and see if that works. I'm not sure if LGNPST will work since I can't see the phone via usb. I will download it and give it a try though.
I also saw the guide in the general Optimus G forums for unbricking it.
http://forum.xda-developers.com/showthread.php?t=2010624
Since i cant really connect via usb, ill probably have to use a different method. Im hoping the usb issue is due to the computer im using and the original computer i used to root and unlock will work.
Click to expand...
Click to collapse
The method in that link is for phones that don't have official firmware to use with lgnspt. If you san get into download mode (power off phone ,connect usb,hold volume down and up plus power ) you should be able to lgnpst back to stock.
adfurgerson said:
The method in that link is for phones that don't have official firmware to use with lgnspt. If you san get into download mode (power off phone ,connect usb,hold volume down and up plus power ) you should be able to lgnpst back to stock.
Click to expand...
Click to collapse
Alright. I was able to get into download mode. I downloaded lgnpst. Do you have an idea where i would find the other necessary files? Again, total noob. Sorry for all the hand holding. You guys have been great!
Cat Rancher said:
Alright. I was able to get into download mode. I downloaded lgnpst. Do you have an idea where i would find the other necessary files? Again, total noob. Sorry for all the hand holding. You guys have been great!
Click to expand...
Click to collapse
You need to go to the IRC channel to grab the new version of lgnpst and the correct files.
Sent from my LG-E970 using xda premium
Cat Rancher said:
Alright. I was able to get into download mode. I downloaded lgnpst. Do you have an idea where i would find the other Didnecessary files? Again, total noob. Sorry for all the hand holding. You guys have been great!
Click to expand...
Click to collapse
Did you get your phone straightened out?
adfurgerson said:
Did you get your phone straightened out?
Click to expand...
Click to collapse
I'm traveling for work and on a work computer, so the IRC channel is blocked. Of course. I'm heading home tomorrow so hopefully I can get everything back to normal when i get on my home computer. (not having a phone sucks)
Do you all think it would be worth putting the base .5 on my sd card and flashing that, or do you think that wouldnt work? .4 is on there now from my original flash, but that won't work. Just curious.
Well is your phone up and running?
I would think it wouldn't cause harm to try and flash .5 onto it, your phone shouldn't get bricked from it.
i agree with Murasakiii
should be fine to run .5
DraginMagik said:
i agree with Murasakiii
should be fine to run .5
Click to expand...
Click to collapse
Welp, I think i earned the title of first bricked phone. It was able to get into recovery and download mode a couple days ago, but now it wont charge it seems. So i cant get it into any mode to do anything. Ive had it on the charger, wall and usb for a couple hours and nothing is happening. I wonder if i can take it back to my att store and try get a replacement. It is within my 14 day window, and there are "hardware" warranties. I have a feeling they will ask what happened and while i may not initially divulge everything, i sadly cant lie. And since its all my fault, i may chalk it up to learning.
i'd say the device started having issues with the USB. unable to see the device when plugged into the computer and the device won't take a charge. don't hear of too many authentic "bricking's" anymore...it can almost always be resurrected. but if the device won't take a charge your time to resolution is rather limited. good luck.
Cat Rancher said:
Welp, I think i earned the title of first bricked phone. It was able to get into recovery and download mode a couple days ago, but now it wont charge it seems. So i cant get it into any mode to do anything. Ive had it on the charger, wall and usb for a couple hours and nothing is happening. I wonder if i can take it back to my att store and try get a replacement. It is within my 14 day window, and there are "hardware" warranties. I have a feeling they will ask what happened and while i may not initially divulge everything, i sadly cant lie. And since its all my fault, i may chalk it up to learning.
Click to expand...
Click to collapse
Before you leave to go to the store hook it up to a set up jumper cables and then attach the other end to your car battery. Then just tell them when you tried to charge it that it started smoking and wont turn on any more.
The only lie you have to tell them is it happened on the stock charger.
Im on the same boat. Tried going back to stock for a warranty return, and i ended up bricking the phone. Im able to get it to download mode and was able to run the lg tool but it keeps failing on me. And when it does complete it still wont load. Im going to try to make my self a powerd usb cable too see if i can get it to work. Have like 2 or 3 days to try to figure it out. Or elese im out 550 bucks.
Sent from my LG-E970 using xda app-developers app
Other option is just telling them you clicked install for the ota update it rebooted and never came back on. They just wipe them at the repair center anyway if they get them to boot up.
Cat Rancher said:
Welp, I think i earned the title of first bricked phone. It was able to get into recovery and download mode a couple days ago, but now it wont charge it seems. So i cant get it into any mode to do anything. Ive had it on the charger, wall and usb for a couple hours and nothing is happening. I wonder if i can take it back to my att store and try get a replacement. It is within my 14 day window, and there are "hardware" warranties. I have a feeling they will ask what happened and while i may not initially divulge everything, i sadly cant lie. And since its all my fault, i may chalk it up to learning.
Click to expand...
Click to collapse
It took 12 hrs to get a clean download of the stock ROM (AT&T internet sucks in my area). The entire time the screen on my phone was on with the LG splash screen displayed. By the time I got the ROM ready for flash, the battery was dead. I was however able to plug in to the USB on my computer and get enough juice to get into download mode. Ran LGNPST (v2.2.3) and the stock ROM installed with no prob. You might try plugging it in then trying to get into download mode.
EDIT: now that I think about it. You need to have it plugged in to the USB before download mode anyway, so you won't be doing anything different than you already did.
Related
First off, I must apologize and say. Yes, I know there are all ready two other posts just this week on 'Did I kill my phone, Is it dead etc.'
So, to make a long story short.
After much research, I started at the ppcgeeks.com forums, then ppckitchen.org and finally made my way over here. I decided it was time to start working on updating my phone.
First off; I downloaded the wrong link and flashed the Olipro 1.20 boot loader on the phone, instead of the 2.4x version that is being used now. No big deal, I then got into boot loader mode and went to flash a stock rom to fix the issue. The rom had an error in the middle and reset. Then my phone reset. It went back into boot loader mode and then after using titan_exitbl.exe it booted to the standard HTC screen. After a moment now at this screen it will display the HTC logo and No Radio in red. After much reading I found that I could simply flash my 512mb MicroSD card, and did. And I placed the TITAIMG.nbh file on the root. (that is the only thing on the card) to upgrade the radio. But now when I try to restart into boot loader mode (power, camera, reset) it only resets and does not go into boot loader mode. I can perform a hard reset and go through the prompts there, but after it completes it simply brings me back to the HTC logo, and No Radio.
There is no connection via Active sync, nor through the USB, so I can not use mtty to edit anything on the boot loader end.
I have done quite a bit of reading and I figure this probably has been asked before, but is there a way to get my phone to get back to boot loader mode so I can load at least a stock rom onto it?
I don't know a whole lot about troubleshooting phones considering I have only had mine for a few weeks. However I have worked for Geek Squad for 3 years so troubleshooting is kind of in my nature.
Have you tried putting it in bootloader mode without your SD card in there? If there is something wrong with the .nbh you have on it and it keeps trying to load it when in bootloader, that could be your problem. I would remove the SD card and try bootloader, at which point you should be able to flash via usb.
Worth a shot at least.
Flash a new bootloader like 2.47 via sd. Then start loading radio and rom from there.
flipzmode said:
I don't know a whole lot about troubleshooting phones considering I have only had mine for a few weeks. However I have worked for Geek Squad for 3 years so troubleshooting is kind of in my nature.
Have you tried putting it in bootloader mode without your SD card in there? If there is something wrong with the .nbh you have on it and it keeps trying to load it when in bootloader, that could be your problem. I would remove the SD card and try bootloader, at which point you should be able to flash via usb.
Worth a shot at least.
Click to expand...
Click to collapse
Yes I have tried with and without the SD card in the phone. I have also tried with and without the phone connected to a USB cable.
I cannot flash anything to the phone because i cannot establish a connection to the phone via ActiveSync.
Did you try what I suggested? Can you get to just the bootloader screen? Hold power and camera then push reset at same time for bootloader.
drewcam888 said:
Did you try what I suggested? Can you get to just the bootloader screen? Hold power and camera then push reset at same time for bootloader.
Click to expand...
Click to collapse
That is the problem. I have tried that. power, camera, and reset. And any combination of other button, SD card in/out, USB in/out, and anything else i can think of...
The bootloader screen will Not come up.
What can the phone do? Kinda sounds like it might be bricked.
drewcam888 said:
What can the phone do? Kinda sounds like it might be bricked.
Click to expand...
Click to collapse
I know, I hope it is not. This is my phone for work, and my boss is pretty pissed that I might have just bricked a phone he just paid for.
It will turn on from the power button, i can reset it normally with the reset push switch. (it then returns to the HTC logo, and No Radio in red). I can also do the 'bootloader' reset, but this does not bring it to the bootloader, it simply acts as a standard reset. I can also do a 'hard' reset, both of the select keys, and the reset switch. It will then boot into the 'do you want to hard reset your phone' prompt, and it will let me go through those steps that would normally hard reset the phone. After the reboot when that is finished it again goes to the HTC logo and No Radio. So, with that, I sure hope that some part of the bootloader is in tack.
Thank you for your help so far.
Are you sure you are holding both the camera and power button at the same time and then pushing reset button while still holding?
psycopyro182 said:
Yes I have tried with and without the SD card in the phone. I have also tried with and without the phone connected to a USB cable.
I cannot flash anything to the phone because i cannot establish a connection to the phone via ActiveSync.
Click to expand...
Click to collapse
From what it sounds like, you're trying to run the bootloader with and without the SD card in. The problem is, it sounds like you don't have a working file actually on the SD card. It also seems that since you cannot make an ActiveSync connection, you aren't able to transfer files to and from the card.
Do you have a microSD card reader?
Check this out: http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
Particularly Section II.2.A. That may fix your problem.
Hope this helps!
Oh and if it doesn't something you said about your boss having 'just' paid for your phone. If its new enough... w-a-r-r-a-n-t-y!
He can't follow those suggestions on the wiki exactly because he cant get a usb connection. But I agree he needs to load the 2.47 on his card using a adapter then try bootloader again.
Did you try EnterBL.exe?
DustinEarnhardt said:
From what it sounds like, you're trying to run the bootloader with and without the SD card in.
Oh and if it doesn't something you said about your boss having 'just' paid for your phone. If its new enough... w-a-r-r-a-n-t-y!
Click to expand...
Click to collapse
I cannot even get the bootloader to come up. Yes I know that I am pressing both buttons and hitting Reset.
And as for Warranty, Will they warranty a phone that has the updated bootloader on it? I know there is a utility to Re-flash your phone to stock, but well, i cant even get mine to do anything at this point. I dont want sprint to tell me that they will not warranty it because I have 'tampered' with it, or 'voided the warranty'.
bitserve said:
Did you try EnterBL.exe?
Click to expand...
Click to collapse
I did not know there was such a tool.
A direct link would be great. That sound like what i need to get out of this mess.
Heres the deal, if you can't get it to go to bootloader, the carrier probably can't either....
I think the enter_BL only works if active sync works, but I could be wrong.
I've never seen a phone yet, or heard of one for that matter that boots as far as yours does yet doesn't go to a bootloader screen when reset properly. It does sound pretty messed up.
More than likely, if you go into the store and say "Hey this is messed up because I tried to update the bootloader on it" you'll get some pretty quizzical looks. They'll more than likely take your phone in the back, not do a thing with it, and then issue you a replacement (if they have one in stock) or mail you one as soon as possible.
It does sound like you may have created a brick, but luckily this one is replaceable. Consider it a "lesson learned" for the next one.
(My apologies if I offend any VZW store employees. I sure there is a rare breed of highly competent and capable technicians out there, but I have yet to meet one in my area.)
Boots Up?
Does your phone boot all the way up where you can explore your SD card on your phone? If you can PM me and I may have a solution for you if your bootloader allows you to flash by SD card.
Brick = New Phone
DustinEarnhardt said:
More than likely, if you go into the store and say "Hey this is messed up because I tried to update the bootloader on it" you'll get some pretty quizzical looks. They'll more than likely take your phone in the back, not do a thing with it, and then issue you a replacement (if they have one in stock) or mail you one as soon as possible.
It does sound like you may have created a brick, but luckily this one is replaceable. Consider it a "lesson learned" for the next one.
one in my area.)
Click to expand...
Click to collapse
So, I walked into the store, and simply said. "I have insurance, what do I need to tell you in order to get the phone fixed." "what do you mean?" "Well i have my phone here, it is totally bricked, the bootloader is toast, and there is no radio or rom, and it will not connect to activesync. So, if i need to come back and tell you my phone is stolen i can."
"Um ok? bricked? bootloader?... Here, let me see it"
(Lucky for me my company had just purchased about a dozen phones from this store, and the techs were happy to work with me)
The tech took the phone in back, and he and another tech looked at it, tried to hard reset, tried the enter bootloader key press. tried to plug it in. Then they both scratched their heads with a completly dumbfounded look on their faces. One of them walked to the closet, grabbed a new phone and brought it to me and said. "Congrats, this is the most screwed up phone I have seen come in here. Here is a brand new one, We will have to send this one back to corporate."
So, now shiny new phone in hand.
I can say simply "Lesson Learned"
Thanks for all of your help guys.
My phone is stuck on the vibrant scree and nothing happens........ i am trying to use odin to flash back to stick and it is always stuck on file analysis.....please help!!!!!!!!!!!!!!!
Try this: http://forum.xda-developers.com/showpost.php?p=8445823&postcount=11
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Remove the USB from the phone, remove battery.
Place the battery back in your phone and get back into DOWNLOAD MODE
Close Odin
Run Odin as Administrator
Select the 512 PIT FIle
Select the T959UVJFD.tar file for PDA
Plug in your phone (Make sure you see a COM Port come up)
Start Flashing
rolf90 said:
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Click to expand...
Click to collapse
as you i had the same problem and finally got it to work by watching this video on you tube:
1.go to you tube
2.search for flash vibrant
3.first video should be "Flashing Firmware with Odin on Samsung Vibrant" by ZDoomentral, its a 3:00 min video
(sorry can't post direct link but i a restricted since i am a new user)
pay close attention as to how he gets his phone into DOWNLOAD MODE, thats where i was going wrong, and just follow the directions of the video.
my phone is up and running with stock kernel and re-rooted it
man i just want to say i just had this same issue happen to be... im a truck driver and having my phone is serious... mainly to play games or what not...but i just got some from Minnesota and tried the odin method and saw that video on you which help give me a visual and its back up ... im very happy... sad to say it was a careless mistake somewhere but i did a back like i always do and it didnt work for some reason...i had a g1 before this vibrant and ive flashed a lots of roms... but anyway i wanna thank everyone one this forum ... i got my phone back
Does this restart the WHOLE THING? because I have information I didn't backup :/
Yes. It deletes EVERYTHING. Just like it's brand out of the box.
I recommend using Titanium Backup and back all your apps. ALWAYS ALWAYS, do a Nandroid backup before flashing ANYTHING.
scootatheschool1990 said:
Does this restart the WHOLE THING? because I have information I didn't backup :/
Click to expand...
Click to collapse
If you have adb up and running & have the ability to get into recovery while you're bricked you can do aN adb pull before flashing
Adb remount
Adb pull /sdcard
After un-bricking you can adb push the folders back
When I did it..it flash back to stock but I have titanium back up so mt phone is back to how I had it ...and I still have every thing else back on, like my movies music etc..
Sent from my SGH-T959 using XDA App
I was trying to help my friend with his Vibrant and now it's stuck at the splash screen in a loop. I can't seem to get it to download mode or recovery or anything. I've pulled the battery, held down both vol keys while pushing power. Any time I connect the usb, it just starts up the boot loop without giving me a chance to do anything else. I can never get to the green charging battery. Any ideas?
I guess I could provide more info... We had rooted the phone multiple times, but Superuser would FC every time. So, we decided to flash eugene's froyo build (http://forum.xda-developers.com/showthread.php?t=740558). That's when I got the boot loop. Odin said it was finished, and it did not go into recovery. It just started boot looping. Maybe I didn't wait long enough before hitting the power? I'm not sure. Anyway. I'm stuck.
EDIT: Unstuck now. I guess I just need to not panic and read more. I held both VOL keys in while connecting to USB and it went into downloading mode. SO, I flash a stock 2.1 ROM and it's back to the way it was. Calling works fine. No data though. Apparently, that was one of the issues before. I'll try rooting again, but it seems like there's another issue. Also... No settings survive reboots. Like turning on USB debugging... Strange.
EDIT : I am now offering a $100 reward via PayPal to anyone that can offer me a solution to this problem. If you do not have a PayPal account, I will mail you a check for $100. Those are my only methods for payment. I am 100% serious about this by the way. From what I'm told, Nandroid backups are stored on the internal SD card, so even once the replacement phone arrives, I could not restore the nandroid backups on the (currently) broken phone over to the new one. I absolutely HAVE to get to those backups, and it is well worth $100 to me. NOTE : to be eligible for the reward, you MUST read the entire thread. I have already exhausted many common solutions to problems like this one, and am getting tired of getting offered the same advice over and over. If you fail to read the thread and offer me a solution that I have already attempted, I will not give you the $100 reward, even if you later are the one that comes up with the solution to my problem.
Please delete my other threads, I can't edit the title on them and they are outdated now.
This is my situation in a nutshell.
Downloaded Obsidian v2, wiped and flashed it. (this is my girlfriend's phone) - she did not like 2.2, so I wiped data/cache and attempted to restore the nandroid backup I had made. After hanging on 'restoring data' for 30 minutes I rebooted the phone, and now I'm here. The phone boots to the Vibrant logo only, I can get absolutely no other logos to show up no matter what I do. I realize now that I needed to flash a 2.1 kernel prior to restoring the Nandroid backup, but on my Droid, when I restore a nandroid backup that includes the kernel, so I did not know this step was necessary.
I have downloaded Odin but I have NEVER used it, so I am completely lost there as well. As far as I know, I simply need to download Odin, and then follow one of the many methods to access download mode. I have tried about 15 different methods of holding the buttons on the phone, plugging in the USB cable at the right time, etc. etc. etc. None of the methods work. The phone boots up to the Vibrant logo each and every time, no matter what. I downloaded and installed the Kies software so the drivers should be installed.
What do I do now? The phone is not hardware locked because I've used the buttons to access recovery many times. Is there a step I'm missing when it comes to Odin or do I just download it and open it? PLEASE give me instructions as if I am a child, because obviously whatever I'm doing is not working. PLEASE no vague instructions. I do not know how to use adb, odin, or basically how to do anything at all with this phone. I am a Droid user, and after I get her phone back to the way it was I will never attempt to hack it again. Thank you.
edit : also, yes I have pulled the SD card/SIM card.
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
use Odin 1.3 or maybe higher
velocity92c said:
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
Click to expand...
Click to collapse
I'm at work but do a search for odin 1.3 which worked for me. There is a thread that had all the files you need to get the phone back to stock kernel and all. If you haven't resolved the problem by tomorrow I'll try to find the thread for you or post the files if I can from my computer.
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Download Mode
velocity92c said:
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Click to expand...
Click to collapse
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Email me [email protected]
The best phone in the world
I have literally tried every possible combination of holding down buttons, powering up, usb cable in, out, etc. etc. I searched the forum and tried at least 30n different "surefire" methods. Odin always sits there and does nothing, and the phone just goes to the vibrant screen.
jaliscojorge said:
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Click to expand...
Click to collapse
I had to build an extremely ghetto Jig, which is just a 301kohm resistor going across pins 4 and 5 of a microusb plug. It sounds hard but its really not that bad, and unfortunately its the only way to get your phone into downloader mode if its hardware locked, like mine is.
As mentioned previously the phone is not hardware locked. I've accesssed recovery several times with the standard methods. Just got back from Tmobile and it will be a week before the new phone gets here. There has to be a way to fix this. Someone please help?
This is pretty weird because if the phone is not hardware locked, there's no reason that you can't get into download mode.
Just to be clear, so are you saying when you hold vol up + vol down ONLY, you will get vibrant screen?
Or when you hold volup + vol down THEN plug in the usb, it goes to Vibrant screen?
You need to be in download mode to use Odin, not recovery mode. Have you ever gotten into download mode via hardware? Was 'usb debugging' enabled? If so, go into download mode and follow Eugene's Froyo that doesn't brick.
I don't know how I can be anymore clear that the phone is not HWL and I cannot access download mode. I'm not trying to be an ass, it's just a very frustrating situation. I know you need to be in download mode to use Odin. I cannot get to download mode or this would be a cinch.
And to the poster before ^ this one, the phone goes to the Vibrant screen regardless of what button combination I press, or whether or not I hit any buttons at all. I've literally tried every combination possible, many many times.
I'm ready to throw this phone out the window. I have a hard time believing I am the only one to ever have this issue. It seems as though the answer to most problems is download mode + Odin but that does me no good.
Is there literally nothing else I can try?
From what I understand email thegreat520 he is supposed to be the guy to talk to I've heard it from a few posts
Still flashing
I know it can be frustrating, but excuse me for starting with the basics...
have you followed this youtube guide? I put it in the sticky because it was very helpful in my opinion.
http://www.youtube.com/watch?v=AnY7P14JSWQ
Here is another way I have not seen before:
http://www.youtube.com/watch?v=E9LYLoK1Qog
and why not post another
http://www.youtube.com/watch?v=rqxearzXrVY
I had the same issue search my post I used a froyo Rom when the phone 1st came out I download then something went wrong will flashing a new Rom I tried and tried odin did not work bc NO download mode I had got my phone the day it came out I just sent it back to tmobile pm ill explain how
Sent from my SGH-T959 using XDA App
Same issue
Used download mode many times, then did the same exact thing you did with the obsidian ROM. Now i cant get into download mode at all.
The method that worked 100% of the time previously (holding both volume buttons and then plugging the phone in while odin is runing) does not work. Tried a bunch of different methods and nothing.
There has to be a way to get around this.
OP, please try the method in the general sticky. It seems to fix the HWL issue.
WOW!
Without even plugging anything in, I:
1) Turned phone off
2) Held Vol. Down + Home button + Power
And that got me into download mode. I will proceed to try flashing back to stock now.
I have tried all the methods in the videos, and the issue is not related to the phone being HWL. It is not HWL. I have used the buttons to access the modes before. So please give me something unique to try besides a button combination, because none of them work. Am I literally the only one in the world that has ever had this problem before? I will paypal someone 50 bucks if they can help me fix this and that's not a lie. Her new phone won't be here for weeks and she is currently without a phone. Maybe I'm doing SOMETHING wrong but it is definitely not a button combination. I have literally tried them all, including with the USB cable in and out, and plugging it in at certain times during the process. Don't you normally get a charging icon when you plug the phone into the computer? All I get is the vibrant screen. Even if the phone is off, if I plug it into a computer without hitting any buttons, it turns on and goes to the vibrant screen. 50 dollars via paypal. You can't beat that. If you don't have paypal I will mail you a check, and no this is not a joke.
So I'm pretty much screwed huh? Can someone tell me if nandroid backups are stored on the SD card on the Vibrant? I will just wait til the new phone gets here and put the old SD card in the new phone and restore it if so.
Here's the story - purchased a soft-bricked Vibrant for $50. It booted up to the phone - ! - computer screen. Took it home, used One-Click Unboot. Took a few tries, drivers, and USB ports, but eventually it worked. After that, it was just turning on and hanging at the Vibrant screen. Going along with other threads, I tried flashing to stock from ODIN. I followed this guide: http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
ODIN was finicky but eventually recognized my phone on COM Port 4. With the appropriate PIT and PDA loaded, I clicked Start and all the files uploaded. The phone restarts and.. stuck at Vibrant again. ODIN even lights up with a green PASS but I've let the phone sit and sit and it never gets anywhere.
Is this thing a total dud? Granted I'm trying to boot without a SIM card in it but I didn't think that would make a difference. Please, someone help. I'm stumped and annoyed.
Tried following this guide as well. Same problem. I'm definitely frustrated.
http://forum.cyanogenmod.com/topic/6998-howto-recover-from-a-soft-brick-on-your-vibrant/
I'm having this same problem, any info would be nice. I've actually tried several different guides online and none have worked for me, I can never get past the bootloader screen.
Also, I have been unable to find the file to install CWR, so I have no backup. I know my phone isn't bricked because I can install different modems and such but nothing is working to get it back up and working.
Make sure you've got the right files. Grab the ones out of the noob guide just to be sure
Sent from my SGH-T959 using XDA App
Yep, same problem. I can't seem to get into recovery either. Or connect to ADB to reboot into recovery. I'm tearing my damn hair out over this.
I tried ODIN flashing the Froyo No-Brick ROM for the hell of it cuz I read it fixed this issue as a last ditch for some people. No dice. Boots to the Vibrant screen for a second, then Vibrant switches to Galaxy S and it just sits there.
If no one has any ideas soon, I'm just going to say screw it. Pretty bummed - I've been on a G1 forever and was excited to use an Android phone that doesn't totally suck.
Wrrryyy said:
I tried ODIN flashing the Froyo No-Brick ROM for the hell of it cuz I read it fixed this issue as a last ditch for some people. No dice. Boots to the Vibrant screen for a second, then Vibrant switches to Galaxy S and it just sits there.
If no one has any ideas soon, I'm just going to say screw it. Pretty bummed - I've been on a G1 forever and was excited to use an Android phone that doesn't totally suck.
Click to expand...
Click to collapse
Go into the Developers section and look at the 2nd or 3rd post "Bay_wolf's AIO Vibrant Toolbox 2.5" . Download that into your computer and run 'Flash to Stock'.
That should help you get to where you need to go. Try the one click method first.
PM sent to Wrrryyy
Thanks for the advice guys, but still no go. Installed the drivers from the toolkit but all I can still do is use ODIN to try and flash stock. Results are exactly the same. Reboot into recovery still isn't working - I have a feeling USB debugging was not enabled on this phone before any of this happened so I'm screwed in that respect.
Keep trying, it's not bricked, one combination of files has to work for you.
Well there's only so many files I can apparently try. I've tried JFD, JI6, Eugene No-Brick.. Is there anything else I should trying flashing with ODIN?
Take out your sim card and microSD card. Download the appropriate stock JFD files, make sure you check repartition; you should be fine. USB debugging box not being checked before has nothing to do with your problem now. I believe either your partition or your bootloasder is screwy. Follow my steps above and you should be ok.
In fact, look at this and follow it to the T.
http://forum.xda-developers.com/showthread.php?t=848737
That's what I've tried probably 30 times by now. Repartition checked and unchecked. And yeah I know USB debugging doesn't have to do with ODIN, it's why I'm assuming I can't get ADB to recognize the phone so I could at least try "adb reboot recovery".
Outside of flashing JFD, JI6, or Eugene's No-Brick, is there anything else I could try?
Wrrryyy said:
That's what I've tried probably 30 times by now. Repartition checked and unchecked. And yeah I know USB debugging doesn't have to do with ODIN, it's why I'm assuming I can't get ADB to recognize the phone so I could at least try "adb reboot recovery".
Outside of flashing JFD, JI6, or Eugene's No-Brick, is there anything else I could try?
Click to expand...
Click to collapse
Try eBay
Sent from my T959 using XDA App
I'm in the same boat, same scenario with constant boot loop. This is my girlfriends phone too
IA-32e said:
I'm in the same boat, same scenario with constant boot loop. This is my girlfriends phone too
Click to expand...
Click to collapse
Look for a new girlfriend on ebay
djquick said:
Look for a new girlfriend on ebay
Click to expand...
Click to collapse
Haha no Craigslist I ended up having her file a claim and send it back. I must have borked the bootloader somehow cause now it wont turn on at all. Thank God for insurance. She's SUPER pissed though.
Compared to my Galaxy SII this phone is very finicky and ODIN is even more unreliable than normal. Never hard bricked a device before.
Picked up a G2 practically new for $100. Loving it so far - rooting process was a snap.
F this Vibrant. Back to Craigslist it goes. Still open to ideas before it's gone so I can attempt to get my money back, lol.
Wrrryyy said:
Picked up a G2 practically new for $100. Loving it so far - rooting process was a snap.
F this Vibrant. Back to Craigslist it goes. Still open to ideas before it's gone so I can attempt to get my money back, lol.
Click to expand...
Click to collapse
The only thing I see that will fix the Vibrant when it's in this state is JTAG brick repair for $50. This is after spending 12 hours searching and attempting to ODIN different stock firmwares till I finally hard bricked it.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-4g-vibrant-4g-jtag-brick-repair/
Yeah I was considering this. I e-mailed the guy asking if it was an appropriate fix. I figure, if the service takes care of a hard brick, it can certainly take care of a soft brick. Maybe I'll do that to keep it around as a back-up phone. Thanks for the replies, everyone.
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Yeah I just did too :/ I installed chainfire 3D and now it stays at the Verizon loading screen. It doesn't shut off, only reboots to this screen. Safe mode doesn't work. I'm hoping there is a way to fastboot, factory restore, etc. via USB. But I think I'm SOL
I just went up to the Verizon store and play dumb I was able to get mine replaced
Sent from my HTCONE using Tapatalk 2
I figured as much. I talked to someone over the phone and they said to bring it in for a replacement. So I'm going in tomorrow for a new one. Lesson learned haha
Sent from my XT907 using Tapatalk
Really hoping someone has came out with a unbrick/really BootLoop of Doom...
So I know a little about android and learn quick and there is very little information on the verizon ellipsis 7. Just so happens I bought one from a side shop and figured out Framaroot will easily root this device. Well you can guess what happen from there. All was going well until i rebooted with rom toolbox pro to change the font format for the second time. Now ever since it hasn't made it past the verizon screen and i cant take it back. Is there any possible way at all of somehow getting a custom recovery on this thing? Or even better a unbrick/bootloop? Oh and I CAN get it to go into stock recovery. Tried the Clear eMMC and Safe Mode but no luck.
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
wonton9224 said:
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
Click to expand...
Click to collapse
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Elipsis Bootloop Help!
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If anyone has a clean copy of the system or firmware directories can you please share with me? --- Also if anyone knows how to get into the stock recovery without android debugging please explain? On a final note if anyone has a custom recovery that they could share that would be amazing as well. I'm in a bootloop and have been stuck in it for a couple weeks. Any assistance would be most appreciated.
dduncan55330 said:
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
wonton9224 said:
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
Click to expand...
Click to collapse
VZW made me send my ellipsis to them for the screen issue after update, i unrooted it before sending it. They were able to fix it somehow because they sent mine right back fixed(i wrote down the serial)
mtk_droidroot_backup_Verizonellipses...HERE
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
Do you think I could get a copy of that backup file?
DYI
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
A new development, possibly.
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
After making edits in system files I broke my QMV7B. Hangs on powered by android logo. In a panic, I wiped emmc from factory more (Chinese).. This reset ADB keys, and complicated matters further. After some digging I may have caught a break... I have figured out a way to stop and suspend the tablet in it's pre boot, or preloader, state. While suspended, it maintains COM3 connection with SPFT, and does not power cycle on and off. It also successfully installs it's onboard Preloader driver without error. Problem is that I need help attempting flash (for best chances)...
needing stock 4.4.4 fit the qmv7, or possibly advice on stock recover if possible.. I have successfully flased devices with Odin before, and have rooted almost every I have had.. I just want the best chance for success, and not to full brick the tab.. this could also be a solution for newer devices as well, but would like to for a good developer to speak with me before I post my findings. I will also post if I get the stock room compatible for flashing with SP Flash tool.. thanks guys..
Help
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
I really need the un-rooted qmv7a stock rom, if any one could provide, that would be fan-freaking-tabulous lol...
no, for real i need the stock rom. I'd really appreciate it.
BTW
if you wanna get clean root on this device, i suggest this- http://forum.xda-developers.com/showthread.php?t=2748169
(has nothing to do with my need for a clean start, that was my own carelessness...)
Bondaddict said:
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
Click to expand...
Click to collapse
Needle point method at USB port
ellipsis 7
I root my ellipsis 7 and install clockworkmod recovery after reboot in recovery struck on boot loop and not even access on recovery mode plz help
anybody still own one of these? lol
---------- Post added at 04:59 AM ---------- Previous post was at 04:41 AM ----------
LoveAboveAll said:
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
Click to expand...
Click to collapse
Hey man it's been 5years & I just wanna say thank you for posting this as I just managed to get into factory mode thanks to your comment xD. factory mode didn't help me a bit but maybe when I get to a PC I can use mtk tools to get a shell or something from there. Thanks again and if anybody has anything more than what's on here about this tablet please contact me as I feel like the last human on Earth with one ????
Yeh
I have one??
And Reading all topics about rooting this tablet...i'm afraid to do that?