Hi there! I need someone help because, i'm really lost. :X
I have one primux bora 7 with ICS 4.0.3 and i want to install the CM9 ROM.
I see in this forum and i download this files that see in this picture:
img231.imageshack.us/img231/1876/pict3012.jpg
After this i install the CM9 nightly and appears in me screen this:
img37.imageshack.us/img37/7249/pict3013.jpg
Until this it's ok.
Then, when i install compatibility mode and/or gapps, appears on my screen this: (and even with only .zip files in the external sd card appears that)
img22.imageshack.us/img22/7228/pict3015i.jpg
Then i reboot the device, and it enter on a boot loop mode, that i can't do anything. Even the tablet it's not recognizes in windows mode (usb drivers didn't work). Touchscreen didn't work to. I'm desperate to fix this. My question is:
Can anyone give me some help, that can permit me to install CM9 in this tablet. I need noob tutorials. I don't understanding nothing of this, and i appreciate some patient from user here. please!
Can anyone help me with this?
Best regards in advance!
Related
Hi, i know I am new here but I am hoping someone can help me out. I just finished rooting my Galaxy s II i9100 using this method, then installing CWR using odin. I then proceeded to successfully install Resurrection v9.4 ICS ROM with the Gapps + fixer. Now I'm trying to connect my phone to my computer to sync some stuff and it doesnt see it. I have tried with usb debug, without it, i have tried as camera, as mtp, nothing is working. I get an error while trying to mount in CWR i get an error stating : unable to open E:/ums lunfile no such file or directory..... I dont know what to do know.... please someone be nice enough to help me out. I appreciate it.
i think i need help, after i've installed the stock system of p7510 into my samsung p7500 it worked, right after that i switched it off and reboot it. It turns into black screen, i tried to contact it to pc, it says it need APX drive, I did install the APX drive. Right now i don't know what i have to do next, I've been researching lots of different links but none of them can seem solve my problem, right now I think I need a full packet nvflash with bat file rom, but all I've found is zip file, it wont work in my samsung. Can someone plz slove my prob lem
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
P.S
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
HELP ME PLEASE :crying:
Unable to install MODULE, it says (please view the screen capture I posted in the thread)
Hi guys, I have a problem regarding my A13 android tablet device. It doesn’t matter if I will post the brand name of my tablet or whatever because what I only wanted to fix is this. When I follow every instruction written at this link, and following instructions 1-7, after reaching step 5 execute run.bat.
It displays the following image I screen captured. (And my tablet doesn’t reboot, it’s the sign that the computer can’t access my tablet.
View attachment 2445500
Obviously, my tablet is connected to the computer via USB cable after running the run.bat as administrator.
But what is the problem why it is happening to me. What can I do for this?
(Additional information: I already installed and followed this instruction on this same device with no error at all. But why does it happened to me even I installed this with success before. I don’t know and I know that I don’t change any system file on my tablet before, and I don’t know because, I have no idea why it happened? I didn’t change any file or modify file neither on my tablet nor from my PC.)
I hope there is an expert who can answer my question and give to me a solution. Thank you in advance if there is.
nooffensesite said:
Unable to install MODULE, it says (please view the screen capture I posted in the thread)
Hi guys, I have a problem regarding my A13 android tablet device. It doesn’t matter if I will post the brand name of my tablet or whatever because what I only wanted to fix is this. When I follow every instruction written at this link, and following instructions 1-7, after reaching step 5 execute run.bat.
It displays the following image I screen captured. (And my tablet doesn’t reboot, it’s the sign that the computer can’t access my tablet.
View attachment 2445500
Obviously, my tablet is connected to the computer via USB cable after running the run.bat as administrator.
But what is the problem why it is happening to me. What can I do for this?
(Additional information: I already installed and followed this instruction on this same device with no error at all. But why does it happened to me even I installed this with success before. I don’t know and I know that I don’t change any system file on my tablet before, and I don’t know because, I have no idea why it happened? I didn’t change any file or modify file neither on my tablet nor from my PC.)
I hope there is an expert who can answer my question and give to me a solution. Thank you in advance if there is.
Click to expand...
Click to collapse
You need to install ADB. I'll report the post to the moderators to get this post in the right section.
I will continue searching for that
thewadegeek said:
You need to install ADB. I'll report the post to the moderators to get this post in the right section.
Click to expand...
Click to collapse
Alright then thanks for the clue, it’s almost 3 days now since I nonstop looking for solution for this problem. I know that it’s a harsh to think that even a simple problem like was I don’t know how to search and fix. I hope you understand that I am almost losing my hope to solve this problem. At least when because I have written and shared my question on this forum. At least I found new idea again.
I never expect that the answer is only to install ADB.
That is my next goal now, to search how to enable ADB on my PC. I know that this problem that I need to fix was only from my PC, because the USB debugging mode on my tablet setting is already activated. And I checked that a dozen of times already.
And if you found something about my post was not in a right section. Then it’s a thankful for me if you can help me with that, because this is just the first day of my life that I started using this site, except for reading a thread as a guest.
It didn't work
I already installed adb using this tutorial on the link <--- (I’m sorry I can't provide the link outside of this site because, I am a new user yet.) But still, because my tablet problem is the touch screen that’s why I am trying to install the module to fix my device touch screen. But the most important part was that from what I need is to touch/tap on a notification area on tablet to activate the “usb mass storage” button.
My PC can’t detect my tablet because I didn’t tap the “usb mass storage” button yet.
And I can’t tap it because that’s it, I need to install the module first to fix the Touchscreen to allow me activate the button. Oh God, this is so terrifying event.
:crying: :crying: :crying:
Did you try booting into recovery?
YES,
thewadegeek said:
Did you try booting into recovery?
Click to expand...
Click to collapse
Yeah, my tablet can boot to recovery mode. Everything is okay from my tablet. The only problem was the touch screen and the unable me to install module by running the run.bat file.
The only way that I can boot to recovery is by using a USB laptop mouse. And entering settings>Backup & reset>Recovery Mode.
Tonight is the 4th day of my problem. And still I’m stuck up from Touch Screen Problem.
Is there any other way aside from using that module just to fix my touch screen?
I am not good using Linux, so if incase the other way to fix this was by using linux operating system. Then maybe, I should stick to using this module.
THL W5000 problems getting stuck on Boot, adb unauthorized/offline
Hello there Guys,
I already postet this in the XDA Assist Forum and I got redirected to here. So here´s my problem listed below. Hope for help from the Pros.
After I flashed a few tons of phones, this one gets me really p*ssed of. I can´t acces the THL W5000 with ADB, I can´t mount the SD-Card because in Recovery there is no Option for this to do so.
I cant push/pull files to/from the Phone. Got no luck with fastboot and it gets stuck on Boot screen, so I can´t accept my PC for adb to work.
And what I recently found out, the Bootloader is locked, so I can´t even Install from SD-Card. I got a new SD-Card with ROMs and TWRP, the Recovery is able to read the SD, but when I launch a .zip, it
suddenly appears the Message (in Dropbox the last Image):
Code:
-- Install /sdcard ...
Installation aborted.
I need help asap
When you need more Info please ask I will reply asap.
Folder with Pics from problem: dropbox.com/sh/hpiiqb72ngyl1fn/AACFDDrhpxA33xRDUEl7CksDa?dl=0 (I will provide more pics when needed.)
Thanks in Advance,
skorpion1298
Related to: forum.xda-developers.com/general/xda-assist/thl-w5000-problems-getting-stuck-boot-t3185514
push.
Phone works again, just got the right ROM, pulled it onto SD, plugged into the SD Slot, installed ROM from there and suddenly it worked all.
What a wonder!
Thanks to me