i think i need help, after i've installed the stock system of p7510 into my samsung p7500 it worked, right after that i switched it off and reboot it. It turns into black screen, i tried to contact it to pc, it says it need APX drive, I did install the APX drive. Right now i don't know what i have to do next, I've been researching lots of different links but none of them can seem solve my problem, right now I think I need a full packet nvflash with bat file rom, but all I've found is zip file, it wont work in my samsung. Can someone plz slove my prob lem
Related
Hello All!
Relative noob here...but more seasoned all the time. Firstly my viewpad device info from FTM:
SWVer=3.410
Model: FM6-001
HWVer: 107
In a nutshell: My bluetooth wasn't turning on (would turn on..then off). So tried to fix by:
1) Rooting and install CWM 5.0.2.6 (awesome tool BTW) and various ROMs, all done with success.
2) No good, oh well now want to give up. Contacted Viewsonic got RMA to return unit..however now concerned they'll not honor warranty if I rooted the device (sigh). So thought I'd return to stock. I did backup..but was already rooted when I thought of it.
3) Trying to return to stock using many versions Sutl3 and Sutlr...and on different PCs none work..once it boots to CWM menu...just stalls with error eventually.
4) Tried to install Napster's CWM with Recovery Menu to be able to return to original state with stock recovery. My version of CWM won't install it...errors out (another great tool though by the sounds of it).
5) Can't use fastboot..never sees device...although ADB works OK. Believe that the Bluetooth issue may be a hardware problem and may be effecting devices ability to work in "download mode". Note that HS-USB device is never present in device manager in Windows even though driver is installed.
So...my question...how can I return my device to stock with one of the below .nb0 files without stock recovery, sutlr or sutl3?
Files I have:
FM6-3310-0-5029-A02.nb0
FM6-3350-0-1008-A01.nb0
Can I somehow use CMW? Can I somehow use adb and "flash_image"?
Will super appreciate any thoughts!
Many thanks in advance!
Johnster25
If I remember correctly, you use SUTL3 from Viewsonic on your PC with the *.nb0 file in the same sub/directory - and just run it to flash the stock ROM or return it to factory condition, you do NOT use CWM to flash or re-install the *.nb0 file ... Part of this process involved overwriting the CWM installed on your rooted device & reversing it to become unrooted, look under the Development subforum here in this section as there's a link/discussion about how to restore, please double check on the details written up.
Also, make sure you have a mSD card in the slot - and that the USB drivers are loaded & running (they should be installed already back then) - might want to power down & restart the PC and do the same to the Vpad7.
Let us know how it go & good luck !
Many thanks for your response.
Well, what has happened when I've used SUTL3 so far is that I select the .nbo image I wish to flash, then the program restarts teh VPAD7 into recovery mode.
From what I've read, after a few moments the phone is then supposed to enter some sort of "download mode" whereby the new image is pushed across the USB cable.
It's at this point with SUTL3 seems to error out, and the phone simply remains in CWM.
I've read a few posts that suggest that not using the correct image could produce a response like this, so I'll retry again this PM having tried re-downloaded the two .nbo files I've tried, and one I've not tried.
Will let you know how it goes!
J.
Hi Again,
OK I've retried it with a fresh copy of SUTL3, and new .nb0 files. Still no good.
Take a look at the enclosed pictures. The first time I try to run SUTL3 the device not configure error shows up. By this point CWM is showing on the VPAD7. I try to run SUTL3 again in this state and now the device not detect error shows up.
So all in all it seems to me that the device when in CWM mode is not exposing an interface to the computer...or the computer lacks the driver needed to utilize the interface.
I've also enclosed a picture of my windows devices when the VPAD7 is connected, as well a copy of the drives that show up when it's connected. The only time the drives change is when the VPAD7 is in CWM mode, at which time the H: drive (where the adb program are) is not present.
So am I missing a driver?
BTW: Have tried to copy down the synchronization program that is on the H: Drive and ran it while running SUTL3...thinking somehow it acted like a bridge to the VPAD7 (I've seen some posts that suggest this). Still no good.
J.
OK..one more piece to the puzzle...or maybe off the trail...but when trying on two differnt PCs when the VPAD7 is first plugged in I get one set of driver installs...and note that the HS-USB has an error.
Later when trying to run SUTL on it...another set of driver installs...again HS-USB error.
See enclosed.
try run sutl with viewpad in FTM mode that worked for me good luck
I have same problem before..n my solution is change back CWM with old ..mine to CWM 2.5.1..found that CWM 5.0.2.6 got problem with SUT L3..and everythind done successfully..as long u can still access ur Viewpad to change CWM its ok..
Wow! Thanks so much for your reply! This would be a huge help. Any idea where I might be able to find that older version of CWM?
Alleycatzero you're a genius! Running SUTL in FTM mode has done it!
THANK YOU!!!!!!!!!!!!!!!!!!!!!!
Johnster25 said:
Wow! Thanks so much for your reply! This would be a huge help. Any idea where I might be able to find that older version of CWM?
Click to expand...
Click to collapse
This is under the Development section - just d/l and unpack the zip file, copy to mSD card & follow the instructions. This verison should be the earlier one and I personally find it worked best together with ext3 and/or ext4 partitioning as needed.
http://forum.xda-developers.com/showthread.php?t=1015005
The issues with SUTL3 and other apps not working/running has to do with the usb drivers not auto-installing & running as they should, try to uninstall Vpad7 drivers, reboot the PC - turn off any firewall and anti-virus software, connect the Vpad7 and let it finish installing/rebooting both devices again. Then, turn back on antivirus & firewall so that you will have easier time flashing rom, connecting mSD card & copying/moving files, etc.
Hi.
I have rootet my phones and swapped kernels and roms
and tried to get a hang of this for 3 years now, and usualy
i find the anwsers i need in the forum.. (great job guys realy love all of you)
But after a weekend of headscratching, i need to make a post here and ask for help..
my phone got softbricked and stuck at Bootscreen after a failed kernel swap, i resolved it by flashing a new kernel through Odin since download mode was the only thing i got it to enter.. But after this my device no longer recognises adb nor the usb
As well as Windows 7 64 cant find the devices driver.. anywere.. yes i have ofc tried the newest available driver.. But the device works.. it just doesent want to communicate with my computer. Odin aswell get COM errors from time to time..
Cant mount ext.sd card, and loading backup doesent seem to do anything either.
Plz help ? :crying:
Try flashing again your ROM since you may have damaged the operating system during the failed kernel swap and the subsequenct failed boots.
If that still fails, take a Titanium backup (aswell as SMS Backup+) and factory-reset the device. However that should not be necessary
I tried other forums now trying the best
I have been really dumb and bricked my Samsung Ace, I was trying to backup the ROM and used software found (apparently I can not link the page)
I have tried using ODIN but the computer while assigning a drive letter will not access the phone. I have downloaded Kiies but that does not work, I have tried holding the power and vol button but no
However I have access to System Recovery, where I get an error message of E:failed to mount, I have put clockwork rec on the SD card and there are various options including mounting objects.
I have now spent 5 days tring to resolve this so really looking for some guidance before I screw up even more
Or will clockworkrec not work
Any advice appreciated!!!
communication
Can I ask a question if anyone knows an answer.
How is it that the PC recognizes the phone and loads the usb drivers, modem and so on yet I can not access it?
Odin the new version wil not communicate with the phone but Odin 3.07 will recognize that is connected to the phone but will not communicate with it/
Does anyone know the answer?
Friend OK I insist u that try this method.
1) install USB drivers in pb
2)download any custom Tom
3)use yaffs tool to change system folder In .img file
4)flash it using ADT( android download tool)
If u need more help just PM me
I am an expert for flashing rom using adt coz I have bricked my phone 1000000 times and solved it using ADT.
HIT THANKS IF HELPED........
Sent from moon to earth........
Tried to flash the wrong rom. now tablet wont turn on. when plugged into pc it comes up as m6 chip and i have no drivers. can anyone point me in the right direction.
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
akashdubey22 said:
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
Click to expand...
Click to collapse
found this site in my searches. still haven't found anything stock or modded for mine yet. maybe you will have better luck . freaktab.(12skip[/url] a few) com/forumdisplay.php?33-NextBook-Tablets[/url] . wont let me post full link yet
HArd Bricked Nextbook nx007hd
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
I read on another webforum about how to write back a rom dump using uberizer, careful though, i remember some version being unable to restore a rom dump
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
Revisiting this tab as my solution for having it work was to fling together parts of the nx008, not perfect, I still needed to get the original ROM.
Can you perhaps provide me with a dump of the original ROM?
Also if you need help loading the rom onto the bricked one, I believe I can be of some help.
Thanks
So I got a cheap android tablet and I wanted to root it. I was successful so I decided to install TWRP. I searched for my specific model and found an image on a german forum. I downloaded and flashed it and it got stuck in a reboot loop. So I looked at the image and it was for the QV1030. I tried to get it into recovery but couldn't. Many sources told me to hold Vol Up and Lock, and I tried this and more. Nothing would make it enter recovery mode. Then I read about SP Flash Tool and found the stock rom for the tablet and decided I would try to flash that. It kept coming up with an error, and every source online told me to format the flash except for the bootloader and then I could flash it. So I did. Now it doesn't show anything on screen, and SP Flash Tool comes up with error 6045. But it does show up in device manager under com ports as, "MediaTek USB Port" so I think I can still do something about it. I don't have any backups. I don't know what I'm doing. I require assistance please.
So I reflashed the entire backup and it come up with no error. The logo comes up and it plays the chime. The logo does this little shimmer effect and once it gets to this screen, it shimmers indefinitely. If I plug it in, it begins installing a driver and then stops part way through.
drsinclair said:
So I reflashed the entire backup and it come up with no error. The logo comes up and it plays the chime. The logo does this little shimmer effect and once it gets to this screen, it shimmers indefinitely. If I plug it in, it begins installing a driver and then stops part way through.
Click to expand...
Click to collapse
I left it for about 5 minutes and it finished the driver. I thought it froze but I was wrong. It shows up now on device manager under Portable Devices as, "MTP USB Device". I tried to see if it was listed as a device by ADB. It is not. Lets just say I've already learned a thing or two about this stuff. Good thing I did it on an 80 dollar chinese tablet and not my HTC One M9
drsinclair said:
I left it for about 5 minutes and it finished the driver. I thought it froze but I was wrong. It shows up now on device manager under Portable Devices as, "MTP USB Device". I tried to see if it was listed as a device by ADB. It is not. Lets just say I've already learned a thing or two about this stuff. Good thing I did it on an 80 dollar chinese tablet and not my HTC One M9
Click to expand...
Click to collapse
I got it to work again mostly. So I realized that I wasn't flashing the whole backup. Some things didn't have a path and I had to set it manualy. Now it has CFW for some reason, but I reset it and it works now. The only thing is WiFi is not turning on. Any ideas about that?
drsinclair said:
I got it to work again mostly. So I realized that I wasn't flashing the whole backup. Some things didn't have a path and I had to set it manualy. Now it has CFW for some reason, but I reset it and it works now. The only thing is WiFi is not turning on. Any ideas about that?
Click to expand...
Click to collapse
I actually want to upgrade this from Android 4.2.2 to a more recent version. Do you guys have any ideas about that?
So I've come to the conclusion that while the device is no longer bricked, the current installation is written over the old one and things are conflicting. I know this because I looked through the cache and found filenames referring to apps I had installed before breaking it. So would the solution be to wipe the system partition and reflash the system.img so everything is fresh? Or does the problem lie elsewhere.
I formated the system partition, used SP Flasher to flash system.img and then did a factory reset. The issue has still not been solved. And now that I have done that, I don't have root access anymore. Framaroot says it was successful and I restart and check root explorer on ES File Explorer and it doesn't work.
I gained root access using a different method. However the WiFi still doesn't work. I think it may be that the mac address information was from the backup I flashed from the internet, and therefore doesn't match. I found a guide that tells me how to hex edit a file and put in my real mac address, but it's unavailable under wifi. I don't have the sticker on the back that says it either. How else can I find it?
Turns out the mac address can be anything. I used SN Write tool and an AB DB for my chipset and it still didn't solve the problem. I have no idea what to do. Can anyone help me?
I fixed the issue by grabbing a different backup from some russian website and flashing the system.img and secro.img to it. It now works fine 100%. Thanks
help - link
drsinclair said:
I fixed the issue by grabbing a different backup from some russian website and flashing the system.img and secro.img to it. It now works fine 100%. Thanks
Click to expand...
Click to collapse
Hey man! I have the same problems with my QV 830. Can you give me the link for system.img and secro.img, please?