Tried to flash the wrong rom. now tablet wont turn on. when plugged into pc it comes up as m6 chip and i have no drivers. can anyone point me in the right direction.
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
akashdubey22 said:
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
Click to expand...
Click to collapse
found this site in my searches. still haven't found anything stock or modded for mine yet. maybe you will have better luck . freaktab.(12skip[/url] a few) com/forumdisplay.php?33-NextBook-Tablets[/url] . wont let me post full link yet
HArd Bricked Nextbook nx007hd
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
I read on another webforum about how to write back a rom dump using uberizer, careful though, i remember some version being unable to restore a rom dump
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
Revisiting this tab as my solution for having it work was to fling together parts of the nx008, not perfect, I still needed to get the original ROM.
Can you perhaps provide me with a dump of the original ROM?
Also if you need help loading the rom onto the bricked one, I believe I can be of some help.
Thanks
Related
Hi to all!
I recently bought this phone, I have to admit to being fully satisfied of the features except for one ... the GPS function.
I have read dozens of guides to adjust the GPS W8+ but not for my model. If I knew how to do the root I could at least try to use the same method.
Does anyone have suggestions on how to do it on this phone?
THL W8 Beyond
Hello, i have also bought a thl w8 beyond and i have the same questions, if anyone could help id be very apreciated!! Thanks
Root
hi,
Motochoper root hack fail on W8 beyond.
THL W8 Beyond:Recovery,Root máy
birdyisme said:
hi,
Motochoper root hack fail on W8 beyond.
Click to expand...
Click to collapse
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Thanks thienhoa
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
thienhoa said:
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Click to expand...
Click to collapse
So I got mine W8 beyond two days ago.
So far so good, but:
1. GPS problem. I am geocacher (more at: geocaching.com) and I need accurate GPS. When I stood still in the open for few minutes, I could see GPS jumping around for 400-900 meters for no reason. AGPS and EPO activated. We will see how it goes
2. I would love to get polish language settings, since there are some apps which fetch the content depending on Your language setting (I know that this is poor design, but this is how they works), so that would be nice. Not an issue anymore. I installed MoreLocale2 and pm'ed it which is more than enough at the moment.
3. I do not see option for sorting the apps in the main apps menu (it was working on my old Lenovo A750) - am I missing something?First 9 icons are fixed and alphabelical, the rest is just alphabetical. I can live with that.
4. I have my contacts stored with country prefix which is not used by my operator. I do not see my contacts data when they are calling me.
The SMSes are provided by operator with country prefix, so the problem is with calls only. I tried to follow this thread http://forum.xda-developers.com/showthread.php?t=2268120 but I am unable to decompile framework.jar - no classes.dex inside. I am not able to deodex framework.odex either, so I am stuck for the moment.GravityMod2 3.0 ROM fixed that problem.
The link provided with the tools and howto contains W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img,
when I go to phone info at my phone I can see W8_beyond.JB2.FHD.EN.COM8P128_MT6589TV1.0.2_20130626.
Seems like I have newer firmware. If anyone can tell me how to extract this, I would be more than happy to share.
GravityMod2 3.0 installed - not an issue anymore
For my good old Lenovo I was able to modify the ROM as soon as I got my hands on any ROM in zip format. I guess I could also try to compile something (I am a programmer), but since I am extremely low on time I would need MT6589T kernel patch (is it the same like mt6589) and some basic manual.
Anyone interested?
Fix GPS
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
thienhoa said:
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
Click to expand...
Click to collapse
Thanks, but I got A-GPS and EPO already enabled and EPO downloaded.
I till try to go to the engineering menu and locking via YGPS.
As I understood from google translator, I should just wait for lock and then close everything. Since then everything should be running smoothly. Am I right?
What about my other questions? Lack of polish is driving my crazy. My news feeds are all US which is driving me crazy ...
w8 beyond dead
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
ilmeccanico said:
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Low_Man said:
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Click to expand...
Click to collapse
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
ilmeccanico said:
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
Click to expand...
Click to collapse
Have You tried reflashing it again with this: ovh.to/GrW17MP?
yes i tried it
Does the GPS works fine on this phone? i would like ot buy this phone....
SICOPOLY said:
Does the GPS works fine on this phone? i would like ot buy this phone....
Click to expand...
Click to collapse
Mine work - kind of ...
After getting the fix the coordinates jumps for 1-2 second every 5 seconds.
This makes it troublesome but possible for navigation
what SAR rating for thl w8 beyond?
Anyone knows how can you root the latest 1.0.2 w8 beyond version?
Getting "Incorrect scatter file format" error
birdyisme said:
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
Click to expand...
Click to collapse
Hi,
Thanks for this great tutorial and for arranging all the needed files in one location!
I have a small problem
1. When I open the flash tool I get the following error: "fail to load a raw data file: "c:\users\stephane\Desktop\thl8beyond\W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img
2. When I continue the falsh tool opens but when I try to upload the scatter file I get the following error: "Incorrect scatter file format!"
3. My current build number is: W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.2_20130626. Can I still use the image you provided ?
Thanks a lot in advance!
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
lepsulet said:
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
Click to expand...
Click to collapse
The easiest and only way i could root my W8 beyond is with this program:
droidchina.com/forum/Thread-ROOT-GUI-Root-Wizard-for-MTK65xx-phones
I have a Trio Stealth Pro 9.7" Tablet by Mach Speed that came with ICS. It wasn't able to run much of anything so I tried to upgrade and needless to say it didn't work.
First, I installed CWM. I did this because the device appeared to have no recovery mode I could find. That seemed to work at first but then I discovered I could ONLY boot into CWM.
SO, I tried to use Live Suit to flash an img of 4.1.1 (I know, a stock file from the manufacturer would have been best but please don't tell me to download one unless you have a working link - I've tried without success).
When that failed, I figured I'd try something else except now I only get a blank screen - not even an initial logo. The only way I can tell if the thing is on or off is by plugging it into my computer, pressing the power button and listening for a usb connect or disconnect noise. (My computer currently recognizes it as USB Device(VID_1f3a_PID_efe8) although it originally recognized it as a Trio something or other).
Any help would be fantastic. Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=2296921
Please read carefully. You must check first whether you have 9.7 or 9.7C before flashing!!!!
Check this if your tab has the Allwinner a10 chip. This worked great for my A10.
http://forum.xda-developers.com/showthread.php?t=1821398
More Questions
Neptune23 said:
http://forum.xda-developers.com/showthread.php?t=2296921
Please read carefully. You must check first whether you have 9.7 or 9.7C before flashing!!!!
Check this if your tab has the Allwinner a10 chip. This worked great for my A10.
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
I appreciate the reply but I don't know how to flash a zip without the use of my tablet screen. I can use Live Suit but that only seems to flash .img files.
Also, I'm not sure how to tell if I have the 9.7 or 9.7c
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
can you fastboot on the RCA tablets?
no i dont think so
How did you brick it?
What happens if you:
1. Hold the power button for 5 seconds to hard power it off
2. Hold the volume down button
3. While still holding the volume down button, press and hold the power button.
4. Hold both buttons for 5 seconds.
i did that and the screen just flickers.... trust me ive tried it all...
please help guys im new to rooting tablets but give me linux and im your man....
ajmp2236 said:
please help guys im new to rooting tablets but give me linux and im your man....
Click to expand...
Click to collapse
@ajmp2236 @chrisdaun ASKED YOU A question please tell use what you did to "mess up"/ brick your tablet and maybe we can help you fix it,
I am sorry to hear about your tablet.
okay well i didnt know how to root at first and i didnt want to use a computer so i downloaded this rom and flashed via recovery menu and it was going fine but there was no root so i was confused so i ended up rooting it using a computer using kingo because its a generic tablet and well i did that and it went well for a few days until i got droidsniff and that ****ed it up because it was running and then the battery died.... please help:crying:
@ajmp2236 I am and IT guy I have used droid sniff for about 6 months or so and never had a problem That app did not brick or ruin your phone.
I also have the same rca dual core rct6378w2 tablet and there is not custom rom or recovery for it yet only stock,. what rom did you try and flash and where did you get the file from, also so can not flash roms or files until we get a custom recover built, only factory sign updates will flash in
stock recovery.
If the droidsniff app killed the battery go charge it for a while and it should work again. please let me know if any of this helps or works.
I'm thinking you are going to have to get a USB jig to force it to go to download mode
Sent from my YP-G1 using xda app-developers app
Info on RCA Tablet
here is information I found useful for the RCA Tablet RCT6378W2
Model Number
RK3168
Semiconductor technology
28 nm HKMG
CPU Instruction Set
Up to 1.2 GHz Dual-core ARM Cortex-A9
CPU
ARMv7-A
GPU
PowerVR SGX 540 (400 MHz)
Memory Technology
LPDDR2, DDR3, DDR3L support
Availability
2013
Utilizing Devices
RCA RCT6378W2,
Anyone have the official Rom
does anyone have the official rom for the RCA RCT6378W2 7" dual core tablet or a back up of there rom if so can you e.mail me a copy [email protected]
darkstorm1720 said:
does anyone have the official rom for the RCA RCT6378W2 7" dual core tablet or a back up of there rom if so can you e.mail me a copy [email protected]
Click to expand...
Click to collapse
did u get official rom?? my tablet also bricked..
I got it
ajmp2236 said:
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
Click to expand...
Click to collapse
I have rom give me your email and I'll give you link
Might help
Try this it might help might be modded
mediafire .com/?itrkcc8k7emimeu
Thats my backup rom, i posted them in androidforums for downloads, there is now a rca tablet section, i also updated the files in img format also comes with the parameter for someone to mod, also the updated files are from my rooted rca, but the original files are stock.
Heres the link.
http://androidforums.com/rca-rct637...-in-img-format-use-w-phoenix-card-3-06-a.html
---------- Post added at 12:50 PM ---------- Previous post was at 12:44 PM ----------
Nice to get credit, i go by androidcustom18 give me thanks.
email for rom
Alex2young said:
I have rom give me your email and I'll give you link
Click to expand...
Click to collapse
my email [email protected]
ajmp2236 said:
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
Click to expand...
Click to collapse
i fully bricked mine as well. mind you i have rooted a few android phones in the short time but i found some update for the rock chip series rca 7" tablet. long story short i had to install this random update on sd card and go into recovery to install it. now i will point out i rooted my tab with kingoo root and it worked but only on windows, i run a linux mint 17.1 os so you can imagine my frustration when doing things easy with windows, but however i re installed a base os for it to boot back into the rca software. and yes it is still rooted so here is the update ish thingy i found which should work for most rca 7" rct blah blah blah...............now DO NOT UNZIP ****, JUST PLACE INTO YOUR SD CARD AND DO THE INSTALL AS YOU WOULD CUSTOM SOFTWARE. NOT SURE IF IT WILL SHOW UP AS A DOWNLOAD IN THIS THREAD BUT YOU CAN EMAIL ME AND I WILL GLADLY SEND ANYONE WHO HARD BRICKED THEIR TAB THE FILE. HARD BRICK MEANING IT'S ON BUT SCREEN IS BLACK WITH A GLOW
solution for bricked rca rct6 blkah blah the cheap fukars
kishangupta.dhl said:
did u get official rom?? my tablet also bricked..
Click to expand...
Click to collapse
..............install this zip as you would any zip on sd card for update and reboot recovery and waa laaa should have a working rca tablet. not sure who made it but maybe the dev's can make a custom rom using this file. and thanks go's to the one who made it although i can't remember the site i went to or link but here it is.............it is probably the closest thing to an actual firmware update meaning stock version of the rom rather then finding it online after like say 15 hours looking
rca 7" tablet bricked and can't find firmware download?
this is my first on xda site so here go's......i assume most know by now if you landed here, there is little about the rca tablet. custom roms and stuff like that. so i will just say a semi short explanation on my rca trials and errors.....
first i rooted it with a computer running windows 7 or 8, using kingoo root. not the apk but the .exe, which you can download from their site just google kingoo root and should come up as first one.
now onto the brick portion of the rca, if you see only the rca logo and it don't do anything then it's a soft boot, easily fixable just reboot into recovery cause for some reason it takes two reset or restart to go into the actual tablet with programs n stuff.....
now if it turns on and shows the rca logo then go's black and you can seee it's on but after waiting for 5 minutes or even 2 and it hasn't turned on then it is hard bricked (meaning nothing loads or works and your holding your penis in your hand......
to fix this issue for the rca 7" black friday cheap ass tablet, rct625w you know which i mean, just install the zip file onto your extern sd card as you would the official update for any droid tab, i should also point out just put it in the general area of your card like putting a file in the c: drive of ur comp like an image or doc....
now what your going to do is reboot into recovery and select install update from sd, once in there you should see the file i posted below show up as a zip, click it and wait for verification and install then reboot and if brought back to recovery just reset again and voila it should give you a rca 7" tablet working with all the bells and whistles that usually come with this **** ass black friday sale for 39 and change!
p.s. my wife payed 95 for it before we knew they were only 50 bucks in walmart canada
i have bricked this tablet 6 times trying new ways to install a cmpletely diff os like a samsung or an archos or whatever isn't an rca **** box.....
Hi fellow xda'rs,
I recently bought a Android TV Stick from Geek(app) from china.
I thought I had found a bargain as its specs were:-
2GB RAM
Quad Core CPU
16GB Storage
I managed to snap this up for £24 which I thought was a bargain but when I got the device delivered and was using it I thought it was a little on the slow side so I began to think it was a clone as its default OS theme was not the same as the usual CX919's aswell.
So I wanted to flash the device with a new ROM specifically the Finless 1.6b ROM.
So after following the instructions to installing the ROM using the software provided with the ROM download I managed to install the drivers and get the software to recognize the device. I then wiped the NAND and attempted to install the ROM but it failed .
Now the device does not boot at all and is not recognized by the PC. Windows just states the device is not recognized and has malfunctioned
So I cannot flash any other or what I believer I have found to be the original ROM for the clone device.
The board states its a GXT_D16_LP_V1.8 150310
I have seen that there are tutorials on putting the device into Mask Flash mode by shorting pins but as this is for the genuine CX919 my board is totally different and does not have the pins available to short I think.
In short could anyone help me to put this device into Mask Flash mode and tell me what id need to do and what pins to short please?
I have attached a couple of pictures of the device and board.
lowery91 said:
hi fellow xda'rs,
i recently bought a android tv stick from geek(app) from china.
I thought i had found a bargain as its specs were:-
2gb ram
quad core cpu
16gb storage
i managed to snap this up for £24 which i thought was a bargain but when i got the device delivered and was using it i thought it was a little on the slow side so i began to think it was a clone as its default os theme was not the same as the usual cx919's aswell.
So i wanted to flash the device with a new rom specifically the finless 1.6b rom.
So after following the instructions to installing the rom using the software provided with the rom download i managed to install the drivers and get the software to recognize the device. I then wiped the nand and attempted to install the rom but it failed .
Now the device does not boot at all and is not recognized by the pc. Windows just states the device is not recognized and has malfunctioned
so i cannot flash any other or what i believer i have found to be the original rom for the clone device.
The board states its a gxt_d16_lp_v1.8 150310
i have seen that there are tutorials on putting the device into mask flash mode by shorting pins but as this is for the genuine cx919 my board is totally different and does not have the pins available to short i think.
In short could anyone help me to put this device into mask flash mode and tell me what id need to do and what pins to short please?
I have attached a couple of pictures of the device and board.
Click to expand...
Click to collapse
problem solved! :d
i found the mask flash mode pins to short by trial and error and luckily enough after 1 hour i solved it and got the pc to flash it back to its original rom. If anyone has the same device or issues and would like to know how to solve this i will be happy to help
I would be interested. I have a very similar clone (was supposed to be mk809iv). I have the same board although possibly different chipset.
I haven't bricked it (yet) but will probably do so if I can't find a way to root it. I think it may have come pre-rooted as super su was preinstalled but it has never worked (possibly because the app updated but not the binary?). I have since tried to update the binary and killed the root access completely.
Questions:
Is the ROM you used pre-rooted or rootable (if you've tried)?
Which pins need shorting? I have a button on the side that may be doing the same thing.
OT. How do I upload images or can I not as a new member?
Thanks in advance
any guide? i have the same device or where to download rom?
If your still looking, i might be able to help with a rom, root, and guide.
Thank you but managed to get root the same day you posted. I may still give it a go when my new tv box turns up though if you dont mind posting the info?
For anyone else interested in how I gained root:
1. Search for, download and install kingroot 4.6.5 (this is the version I used, only the latest version is available from official site and cannot be sure next steps will work with it)
2. Run kingroot and follow steps to gain root (dongle may reboot)
3. BUY super sume from play store.
4. Run super sume and follow steps to replace kingroot with super su.
what pins did you short
I am having problems flashing my hdmi stick . I can't get it to flash mode. which pins did you shorted?
can you email me a picture of it? [email protected] thanks
Lowery91 said:
problem solved! :d
i found the mask flash mode pins to short by trial and error and luckily enough after 1 hour i solved it and got the pc to flash it back to its original rom. If anyone has the same device or issues and would like to know how to solve this i will be happy to help
Click to expand...
Click to collapse
Hello,
Having some problems with this stick .Messed up trying to flash a non rooted rom and now I only get a blue icon in rkbatch tool ( after short pin 5-6 ) and nothing happens. Download boot fail errors for a year...
Can someone help me please?
Is it the same model? What version of rkflash tool are you using. And what version are you trying to flash. In my case I didn't need to short any pins.
spade2be said:
Is it the same model? What version of rkflash tool are you using. And what version are you trying to flash. In my case I didn't need to short any pins.
Click to expand...
Click to collapse
I've used several batchtools from 1.5 ( doesn't see my device at all ) to 1.8, different roms ( neomod, finless, stock cx919 roms )hoping one would give me something. All different bootloaders 1.24, 2.08, 2.13,...
I'm going to check mine out. It's been a minute since I used it. But I got the rock chip tool and the img file. I'll zip it up and pm you the link asap.
spade2be said:
I'm going to check mine out. It's been a minute since I used it. But I got the rock chip tool and the img file. I'll zip it up and pm you the link asap.
Click to expand...
Click to collapse
Thnx a million for your help. I've gone bonkers over this hahaha
Lowery91 said:
problem solved! :d
i found the mask flash mode pins to short by trial and error and luckily enough after 1 hour i solved it and got the pc to flash it back to its original rom. If anyone has the same device or issues and would like to know how to solve this i will be happy to help
Click to expand...
Click to collapse
what pins did you short
I am having problems flashing my hdmi stick . I can't get it to flash mode. which pins did you shorted?
can you email me a picture of it? [email protected] thanks
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.