Well I was restoring my phone and I think I selected the wrong back up and now It won't turn on
ssfirme said:
Well I was restoring my phone and I think I selected the wrong back up and now It won't turn on
Click to expand...
Click to collapse
Np. Go to recovery again and restore again.
If cant. Just flash official rom.
Sent from my WT19i using Tapatalk 2
saeed74 said:
Np. Go to recovery again and restore again.
If cant. Just flash official rom.
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
Big problem if he can't turn on his phone.
problem is i cant even get into recovery
ssfirme said:
Well I was restoring my phone and I think I selected the wrong back up and now It won't turn on
Click to expand...
Click to collapse
you very may well be the first Optimus G bricker... that should come with a title.
ssfirme said:
Well I was restoring my phone and I think I selected the wrong back up and now It won't turn on
Click to expand...
Click to collapse
Can you get to download mode? If so you should be able to use lgnpst. See my guide and/or visit irc. Good luck!
yes im able to get into download mode,i actually ran lgnpst but gives me a error at 85%
error at 85% is normal - press and hold the power button an the phone should restart
mbonus said:
error at 85% is normal - press and hold the power button an the phone should restart
Click to expand...
Click to collapse
Do I do it while the phone is plug up to pc or do I disconnect first
Related
i just flashed my phone with official romania version 2.3 v20g.kdz i flashed with kdz updater it says finished successfully & now after that i swiched on my phone but now it is stucked on android logo for last 10 min
Do a hard reset first. Home+vol up+power i think.
mihir287 said:
Do a hard reset first. Home+vol up+power i think.
Click to expand...
Click to collapse
nothing happened by doing that should i flash it again
Actually is home + vol. down and power button. You'll know you done it right cause you'll see a proggres bar with android and opening box picture. I got bootloop me too first time I kdzed the v20g. I did a reset and it was ok
mprou said:
Actually is home + vol. down and power button. You'll know you done it right cause you'll see a proggres bar with android and opening box picture. I got bootloop me too first time I kdzed the v20g. I did a reset and it was ok
Click to expand...
Click to collapse
so i have to shutdown my phone or on android logo state only i should do hard reset
when the phone is shut down press the above combination and keep it pressed until you see the image I discribed above. Is your phone still on bootloop? If yes remove the baterry to shut it off
rchile said:
so i have to shutdown my phone or on android logo state only i should do hard reset
Click to expand...
Click to collapse
Shut down the phone, press home+vol down+power and wait for a bit.
Mine also got stuck and worked after hard reset.
mprou said:
Actually is home + vol. down and power button. You'll know you done it right cause you'll see a proggres bar with android and opening box picture. I got bootloop me too first time I kdzed the v20g. I did a reset and it was ok
Click to expand...
Click to collapse
thank you very much phone successfully revived my phone with that hard reset
you can't get to the recovery or reset without turning it off first. if it don't wanna turn off just pull the battery then try again.
Little too slow in responding. very sorry about that.
Icemaine said:
you can't get to the recovery or reset without turning it off first. if it don't wanna turn off just pull the battery then try again.
Little too slow in responding. very sorry about that.
Click to expand...
Click to collapse
now its working fine so how to root this version
check the ginger lol thread in development. It has instructions for rooting that should work.
shortcut to instructions. http://forum.xda-developers.com/showpost.php?p=14590924&postcount=202
But there are probably easier ways i'd guess.
I think you should do it with GingerBreak, but I'm not sure.
Icemaine said:
check the ginger lol thread in development. It has instructions for rooting that should work.
shortcut to instructions. http://forum.xda-developers.com/showpost.php?p=14590924&postcount=202
But there are probably easier ways i'd guess.
Click to expand...
Click to collapse
apparently gingerbreak doesn't work (fc or something) so actually this is the easiest way to do it right now i think
Try this
echo 1 > /data/local/lge_adb.conf
for root. From adb. But you'll need to install the superuser app I think.
Sent from my LG-P500 using XDA App
mprou said:
apparently gingerbreak doesn't work (fc or something) so actually this is the easiest way to do it right now i think
Click to expand...
Click to collapse
You could be right. but I'm not keen to test this myself. i have the P509T kdz file. but i don't care to find out if it works hah
mprou said:
apparently gingerbreak doesn't work (fc or something) so actually this is the easiest way to do it right now i think
Click to expand...
Click to collapse
can i use super oneclick
rchile said:
can i use super oneclick
Click to expand...
Click to collapse
superoneclick couldn't root gb. only froyo. I think i red somewhere that there is a version that can root gb but haven't looked in to it at all
rchile said:
thank you very much phone successfully revived my phone with that hard reset
Click to expand...
Click to collapse
Remember, whenever you downgrade via KDZ, at last after disconnecting the phone. Always remember to perform the hard reset by the 3 button combo
Sent from my LG-P500 using XDA Premium App
mprou said:
superoneclick couldn't root gb. only froyo. I think i red somewhere that there is a version that can root gb but haven't looked in to it at all
Click to expand...
Click to collapse
yea i also read somewhere it can root gb but cant remember
DJoptimus-One said:
Remember, whenever you downgrade via KDZ, at last after disconnecting the phone. Always remember to perform the hard reset by the 3 button combo
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
ok i didnt know that this version is ok but i want to overclock it
sry for creating a new thread...
i was flashing my lg o1 and just before selecting the "install zip from sd" i mistakenly rebooted my phone and now it is loading 2.2.2 what should i do now??
should i follow the steps from the beginning or what else??
there is no gingerbreak icon and rom manager icon in menu now,but super access icon is still there
What? Reboot into recovery again (I hope you know the button combo).
mihir287 said:
What? Reboot into recovery again (I hope you know the combo).
Click to expand...
Click to collapse
but there is no rom manager and ginger break option in my menu,will it work??
and btw what is the combo?
bro i was on the last step....i formated memory card, wiped cache etc....
Sigh. Turn off the phone and press and hold home+vol down+power buttons till the recovery menu appears.
mihir287 said:
Sigh. Turn off the phone and press and hold home+vol down+power buttons till the recovery menu appears.
Click to expand...
Click to collapse
one more help if u dont mind...
i installed the void forever rom and when i put the screen to sleep mode it gets into sleep mde in some strange way...a white beam is there in the middle of the screen like there is some fault in display....is it normal or??
It's the screen turn off animation. It's just an animation, your phone is fine.
gurpreet9080 said:
one more help if u dont mind...
i installed the void forever rom and when i put the screen to sleep mode it gets into sleep mde in some strange way...a white beam is there in the middle of the screen like there is some fault in display....is it normal or??
Click to expand...
Click to collapse
Its a CM7 feature. Don't you like it? Anyways you can always turn it off from the cynogenmod settings.void forever does not hav the settings by default so you must flash the settings first via the proper zip which you can find in the void forever post
Sent from my LG-P500 using XDA App
sambaranghosh said:
Its a CM7 feature. Don't you like it? Anyways you can always turn it off from the cynogenmod settings.void forever does not hav the settings by default so you must flash the settings first via the proper zip which you can find in the void forever post
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
thanx for helping me guyz
one last question,btw i am really happy with this rom...
is it possible to get to the default phone as i got it out of the box in case i need warranty later??
gurpreet9080 said:
thanx for helping me guyz
one last question,btw i am really happy with this rom...
is it possible to get to the default phone as i got it out of the box in case i need warranty later??
Click to expand...
Click to collapse
Use this AmonRa nand backup.
mihir287 said:
Use this AmonRa nand backup.
Click to expand...
Click to collapse
bro i have backed up my stock rom as clockwormod before flasing...m i rite??
but do i have to unroot the phone etc etc before availing the warranty??
If you have a backup then you can restore it to get back to stock(obv). And it is recommended you unroot before taking it to warranty services. Some may allow it, others may not.
--deleted--
Attempting to install a new rom ftf file used via flashtool i think i have killed my xperia.
I am left with a yellow exclamation/phone image, will not reboot,boots and reboots to exclamation mark when plugged in.
Can anyone help get me out of this mess ?
Thanks.
Is recovery flashed to ur x?
Can your pc detect mobile?
Sanjay Kumar said:
Is recovery flashed to ur x?
Can your pc detect mobile?
Click to expand...
Click to collapse
No, pc cannot recognise mobile as it keeps rebooting.
unsure of first question.Dont think it is
While rebooting try to hit adb reboot-recovery using adb..do it before mobile gets off.
Also try button combo just to see weather it can enter into recoveru.
Good luck:thumbup:
Sanjay Kumar said:
While rebooting try to hit adb reboot-recovery using adb..do it before mobile gets off.
Also try button combo just to see weather it can enter into recoveru.
Good luck:thumbup:
Click to expand...
Click to collapse
Bad luck again, still no link up.
Thanks anyway.
Try SEUS - Sony Ericcson Update Service
miniman1 said:
Bad luck again, still no link up.
Thanks anyway.
Click to expand...
Click to collapse
Hi mate have you tried to go back to original software with SEUS? LINK - http://www.sonymobile.com/global-en/tools/update-service/
Then you can just re-root etc with flashtool. work's for me everytime. Good luck should work and cant hurt to try.
doodownunda said:
Hi mate have you tried to go back to original software with SEUS? LINK - http://www.sonymobile.com/global-en/tools/update-service/
Then you can just re-root etc with flashtool. work's for me everytime. Good luck should work and cant hurt to try.
Click to expand...
Click to collapse
Thanks, again I have tried that route, it comes back no software update.
miniman1 said:
Thanks, again I have tried that route, it comes back no software update.
Click to expand...
Click to collapse
Try recovering through the tool instead of updating...
blingin said:
Try recovering through the tool instead of updating...
Click to expand...
Click to collapse
sorry but all the obvious routes have been tried, all to no avail.
edit: wrong thread
I recently acquired an optimus g and the guy that owned it before said he tried flashing a KitKat ROM and it soft bricked. I can't get the computer to recognize the phone and I got the most recent drivers for it. I was gonna use lgnpst to fix it but I can't. Does anybody have any ideas on how I can fix it?
gerg6986 said:
I recently acquired an optimus g and the guy that owned it before said he tried flashing a KitKat ROM and it soft bricked. I can't get the computer to recognize the phone and I got the most recent drivers for it. I was gonna use lgnpst to fix it but I can't. Does anybody have any ideas on how I can fix it?
Click to expand...
Click to collapse
Computer doesn't recognize it at all, or just lgnpst? Lgnpst doesn't work with USB 3.0 if that helps explain it.
adfurgerson said:
Computer doesn't recognize it at all, or just lgnpst? Lgnpst doesn't work with USB 3.0 if that helps explain it.
Click to expand...
Click to collapse
My computer won't recognize it at all, I have another lgog that I use and I used that 1 to get all the recent drivers. I don't understand it....
gerg6986 said:
My computer won't recognize it at all, I have another lgog that I use and I used that 1 to get all the recent drivers. I don't understand it....
Click to expand...
Click to collapse
Does it show up in windows device manager? Also if it was ever converted it might need nexus 4 drivers.
adfurgerson said:
Does it show up in windows device manager? Also if it was ever converted it might need nexus 4 drivers.
Click to expand...
Click to collapse
That's the only conclusion I have come across, if it was converted is there anyway to fix it?
gerg6986 said:
That's the only conclusion I have come across, if it was converted is there anyway to fix it?
Click to expand...
Click to collapse
Lgnpst using n4 drivers then there is a thread for fixing camera and storage issues.
adfurgerson said:
Lgnpst using n4 drivers then there is a thread for fixing camera and storage issues.
Click to expand...
Click to collapse
OK awesome, I will give that a try and report back when I get the chance. Thank you
gerg6986 said:
OK awesome, I will give that a try and report back when I get the chance. Thank you
Click to expand...
Click to collapse
Check device manager too. If it shows as QSUSB Dload it is a hard brick that can't be fixed with lgnpst.
What is it doing exactly, have you tried getting to recovery with button combo?
adfurgerson said:
Check device manager too. If it shows as QSUSB Dload it is a hard brick that can't be fixed with lgnpst.
What is it doing exactly, have you tried getting to recovery with button combo?
Click to expand...
Click to collapse
I can get to recovery but t it won't read my sdcard. I'm gonna try the n4 drivers and try lgnpst...
gerg6986 said:
I can get to recovery but t it won't read my sdcard. I'm gonna try the n4 drivers and try lgnpst...
Click to expand...
Click to collapse
Does it boot into the ROM? Is it softbricked now? You may just need a newer recovery.
adfurgerson said:
Does it boot into the ROM? Is it softbricked now? You may just need a newer recovery.
Click to expand...
Click to collapse
its still soft bricked, i tried numerous drivers for the n4 and i still cant get my computer to recognize the phone. i dont know what to do...
gerg6986 said:
its still soft bricked, i tried numerous drivers for the n4 and i still cant get my computer to recognize the phone. i dont know what to do...
Click to expand...
Click to collapse
I wonder if you could get adb to recognize phone. If so you could fastboot flash a different recovery, or adb push a zip to internal storage.
Does it boot to the splash screen? If so have you tried a factory reset using button combo?
adfurgerson said:
I wonder if you could get adb to recognize phone. If so you could fastboot flash a different recovery, or adb push a zip to internal storage.
Does it boot to the splash screen? If so have you tried a factory reset using button combo?
Click to expand...
Click to collapse
it only boots to the lg logo, im trying SDK tools to try and get adb to recognize it. hopefully it works...
gerg6986 said:
it only boots to the lg logo, im trying SDK tools to try and get adb to recognize it. hopefully it works...
Click to expand...
Click to collapse
For factory reset it is from phone powered off hold volume down and power until menu comes up.
adfurgerson said:
For factory reset it is from phone powered off hold volume down and power until menu comes up.
Click to expand...
Click to collapse
i tried that and it only boots to the lg logo..
adfurgerson said:
For factory reset it is from phone powered off hold volume down and power until menu comes up.
Click to expand...
Click to collapse
even wih he updated drivers i still cant get the computer to even see the phone at all...
adfurgerson said:
Does it boot into the ROM? Is it softbricked now? You may just need a newer recovery.
Click to expand...
Click to collapse
i cant get into the rom, everything has been completely wiped. i still have no success at getting the computer to recognize that it is plugged in..
gerg6986 said:
i cant get into the rom, everything has been completely wiped. i still have no success at getting the computer to recognize that it is plugged in..
Click to expand...
Click to collapse
I can't think of anything else to suggest. If anything pops into my head I'll post it here.
adfurgerson said:
I can't think of anything else to suggest. If anything pops into my head I'll post it here.
Click to expand...
Click to collapse
ok thank you very much...
I need to flash a file that locks the bootloader. It contains Aroma Installer. Is there a way to flash it without booting into recovery? Something linke an app that flashes the file directly from the phone?
MICH_** said:
I need to flash a file that locks the bootloader. It contains Aroma Installer. Is there a way to flash it without booting into recovery? Something linke an app that flashes the file directly from the phone?
Click to expand...
Click to collapse
Everything is gonna be done in recovery or bootloader. No way to do it other wise.
zelendel said:
Everything is gonna be done in recovery or bootloader. No way to do it other wise.
Click to expand...
Click to collapse
bad ._.
The problem is that i cant turn my phone off and boot into recovery.
MICH_** said:
bad ._.
The problem is that i cant turn my phone off and boot into recovery.
Click to expand...
Click to collapse
And why cant you turn it off?
zelendel said:
And why cant you turn it off?
Click to expand...
Click to collapse
dont know. my phone is somehow broken. If i turn it off it wont turn back on.. no idea why.
MICH_** said:
dont know. my phone is somehow broken. If i turn it off it wont turn back on.. no idea why.
Click to expand...
Click to collapse
I would use the ADB commands to boot into recovery. Also might want to look into logcats to see what the issue is.
zelendel said:
I would use the ADB commands to boot into recovery. Also might want to look into logcats to see what the issue is.
Click to expand...
Click to collapse
not even ADB works anymore. The phone is not being recognized by the pc..
MICH_** said:
not even ADB works anymore. The phone is not being recognized by the pc..
Click to expand...
Click to collapse
Looks like a logcat is the next step
Bat cave One
zelendel said:
Looks like a logcat is the next step
Bat cave One
Click to expand...
Click to collapse
I cant boot into fastboot either..
MICH_** said:
I cant boot into fastboot either..
Click to expand...
Click to collapse
That has nothing to do with getting a logcat
Bat cave One
zelendel said:
That has nothing to do with getting a logcat
Bat cave One
Click to expand...
Click to collapse
Btw my phone is now powered off.
MICH_** said:
Btw my phone is now powered off.
Click to expand...
Click to collapse
Well if you cant turn it on then you maybe out of luck and need a replacement.
zelendel said:
Well if you cant turn it on then you maybe out of luck and need a replacement.
Click to expand...
Click to collapse
Do you think HTC will spot the unlocked bootloader etc. ?
MICH_** said:
Do you think HTC will spot the unlocked bootloader etc. ?
Click to expand...
Click to collapse
Most likely, yes. If they can get it to power up.
zelendel said:
Most likely, yes. If they can get it to power up.
Click to expand...
Click to collapse
I make the bootloader to show "locked" and flashed the stock recovery!!!
Now the only thing i have to do is to s-on. It is still s-off. Is there as adb command for this? Or how to do that? Btw: I have got a HTC One