HTC Amaze 4G Soft Bricked - HTC Amaze 4G

Hello friends,
One of my friends has got an HTC Amaze 4G from the US. The phone is already factory sim unlocked. He's given this phone to me because he wanted it to read and write Arabic letters and RTL in general.
I got this phone, what I've already done till I had the problem was, unlocking bootloader -> installing EXT4 -> got a patch from Hasoon2000 (Link to the original thread) -> EXT4 Recovery for wiping cache, dalvik and fixing permissions -> Flashed the Arabic Patch zip -> Wooops! the phone is stuck at the HTC screen.
I've searched the forums for an RUU to get the phone back and fix the soft brick. All what I found were RUUs for different carriers from CA and US (RUU collections thread)
Later on, I relocked the bootloader, downloaded this RUU
PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC _30.66.550L.08D_release_228638_signed.zip
Put it on an Ext SD card, went to fastboot bootloader, it started detecting the ZIP and finished showing this error "Incorrect Phone ID"
Then I downloaded this one (Asian RUU) too after some searching.
PH85IMG_Ruby_hTC_Asia_WWE_1.60.707.3_R_Radio_1.13.550L.13DC_30.69b.550L.101_release_253820_signed.zip
The fastboot detected it but ended up with going back to bootloader main menu without any prompts or errors.
Finally, I am clueless and came here to ask you for your help and suggestions to overcome this problem.
Notes:
-The phone is Factory Sim Unlocked and does not have any names of any carries burnt into it (Unbranded Phone).
-After finishing the process of unlocking bootloader, I saw the list of the languages selectable were English (Singapore), English (Pakistan), and other Asian languages and no US and EU languages were present (That's why I was trying to install the RUU of Asia)
-The phone is on Stock GB 2.3.4, stock kernel, and EXT4 Recovery.
Thanks all

Have you tried restoring a backup. Can you boot into the bootloader and recovery?. If so you just need to figure out why this device is unbranded. I never seen an amaze unbranded unless the digitizer was replaced at some point. Was this phone ics or gingerbread before it was tampered with?
Sent from my VLE_U using xda app-developers app

if by unbranded you mean the phone just has HTC and no other carrier lable on it then its most likely the Canadian version from Wind Mobile or Telus or Mobilicity. and as far as you downloading the RUUs have you renamed them to PH85IMG.zip before trying to flash them in bootloader? another easy way to find out what stock ruu you need is to check your HBOOT version on the boot loader so you can see what stock RUU's are compatible with it

whozilla said:
Have you tried restoring a backup. Can you boot into the bootloader and recovery?. If so you just need to figure out why this device is unbranded. I never seen an amaze unbranded unless the digitizer was replaced at some point. Was this phone ics or gingerbread before it was tampered with?
Sent from my VLE_U using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, I have not taken any backup, as I assumed at first that the process is quite simpler (which is already is). I already ran at much harder work than this one with ios, symbian, bada, and android.
Yes, I can boot into the bootloader and recovery.
I neither know the reason for unbranding the device.
It was Stock Gingerbread 2.3.4
Thank you for your appreciated time and help.

Ninjistix said:
if by unbranded you mean the phone just has HTC and no other carrier lable on it then its most likely the Canadian version from Wind Mobile or Telus or Mobilicity. and as far as you downloading the RUUs have you renamed them to PH85IMG.zip before trying to flash them in bootloader? another easy way to find out what stock ruu you need is to check your HBOOT version on the boot loader so you can see what stock RUU's are compatible with it
Click to expand...
Click to collapse
Yes, I have already renamed RUUs each time before copying them to the SD card.
HBOOT 1.92.0000
eMMC-Boot
Feb 29 2012, 17:06:37
Could you tell me how to know which stock RUUs are compatible with the phone?
Note: I ran across this thread, but I don't actually know whether S-off and SuperCid would help me in my case or not. I don't want to put water into soil
My Cid is the same as his one, HTC_044.
Thank you for your appreciated help and time.

abdozoon said:
Yes, I have already renamed RUUs each time before copying them to the SD card.
HBOOT 1.92.0000
eMMC-Boot
Feb 29 2012, 17:06:37
Could you tell me how to know which stock RUUs are compatible with the phone?
Note: I ran across this thread, but I don't actually know whether S-off and SuperCid would help me in my case or not. I don't want to put water into soil
My Cid is the same as his one, HTC_044.
Thank you for your appreciated help and time.
Click to expand...
Click to collapse
I'd wait for a 2nd opinion to be sure, but the HBOOT looks like mine did on Gingerbread which is a US T-Mobile brand.
I'd also wait to get a working RUU on it before doing S-Off and super cid. But, once you do both, you'll be able to flash any carrier's RUU.

wolf_7669 said:
I'd wait for a 2nd opinion to be sure, but the HBOOT looks like mine did on Gingerbread which is a US T-Mobile brand.
I'd also wait to get a working RUU on it before doing S-Off and super cid. But, once you do both, you'll be able to flash any carrier's RUU.
Click to expand...
Click to collapse
I will try flashing other RUUs till the moment I get a second opinion.
Thank you Wolf.

Just figured out why the Asian RUU did not get flashed in the bootloader, as the package contains 4 bad files (CRC errors); you can see the 4 files in the attached screenshot.
One guy also had those bad crc errors before, Thread.
Therefore, the only solution to my problem is to s-off and supercid to get another RUU from other carriers to work.
The question is, is there anyway to s-off the phone from the bootloader?
Because the JuopunutBear method requires the phone to be on (operating normally), USB Debugging on, and fast boot off from power options.
Hope someone helps me.
Thanks all
EDIT: Just finished downloading the ruu from another mirror, Winrar does not show any errors!
will transfer it to SD, and retry.
wish me luck guys.
UPDATE: The phone is back to life again! Time to backup!

wait you were on GB i would have updated to ICS before trying to flash any custom roms, most roms are designed for android 4.0+ let me see if i can find u a stock GB RUU
---------- Post added at 09:22 AM ---------- Previous post was at 09:16 AM ----------
ohh okay didnt see you had it up and running, this time do an official update to ICS before trying to flash anymore roms, and always remember to do a NANdroid backup before flashing any and all roms, once you update to ICS you should S-OFF your phone and superCID it so this way next time you can restore to stock with any RUU from any carrier, good luck and happy flashing and dont forget to hit that thanks button for ppl that offer help/advice ^^

plz share the link for the Custom ROM
" Just finished downloading the ruu from another mirror, Winrar does not show any errors!"
can u plz share the link where u downloaded it from,i also tried to download it 10-11 times!!every time get a corrupt file,plz i need this file.if u can upload i will be so thankful.
---------- Post added at 02:35 PM ---------- Previous post was at 02:11 PM ----------
abdozoon said:
Just figured out why the Asian RUU did not get flashed in the bootloader, as the package contains 4 bad files (CRC errors); you can see the 4 files in the attached screenshot.
One guy also had those bad crc errors before, Thread
Therefore, the only solution to my problem is to s-off and supercid to get another RUU from other carriers to work.
The question is, is there anyway to s-off the phone from the bootloader?
Because the JuopunutBear method requires the phone to be on (operating normally), USB Debugging on, and fast boot off from power options.
Hope someone helps me.
Thanks all
EDIT: Just finished downloading the ruu from another mirror, Winrar does not show any errors!
will transfer it to SD, and retry.
wish me luck guys.
UPDATE: The phone is back to life again! Time to backup!
Click to expand...
Click to collapse
can u plz share the link where u downloaded it from,i also tried to download it 10-11 times!!every time get a corrupt file,plz i need this file.if u can upload i will be so thankful.

Related

[Q] Rogers ICS Upgrade?

Hey All,
I am trying to install the OTA for ICS that was released by Rogers today for my EVO 3D.
I am rooted and unlocked but with the stock Rogers ROM and I also have S-OFF.
The problem I am running into is that I am able to download the upgrade but when I go into HBoot and try to apply it I get a signature verification failed.
Originally I thought it might have been a bad download so I downloaded it a 2nd time, same result.
So I thought, what the hell, I will turn off the signature check and try it again. This time I get an error that the 'assert failed: check_cid(getprop("ro.cid").' and the installation aborted.
Does anyone have any insight into why this would fail? I am hoping to apply this but not sure why its a no go.
Thanks for the help in advance.
Cheers, Crash
Have you ever changed your cid? run "fastboot getvar cid" and post what it says. If your cid is original for rogers, the ota may not be working because you are s-off.
Hey @patrick92260
I have not checked my CID, not really sure how actually.
In order for me to run that command I would have to be hooked up to ADB I assume? If so thats going to need to wait until I get home tonight to try that and give you the results, unless there is another way I can run that command?
Thx for the reply
Yeah it's done through ADB. If you don't really know what the cid is, you probably haven't changed it. If you have the stock recovery, then the reason the ota isn't working has to be because you are s-off. you will probably have to wait for an RUU to upgrade to ICS.
Makes sense then. Would setting S-ON make it so I can apply it? Or would that not be worth the effort?
Honestly I can wait a bit longer, we have been waiting this long for it
Thx for the help.
But you should be able to get back to S-ON by flashing Gingerbread RUU, no?
If you originally used revolutionary to get s-off, then you have radio s-off which is the highest level of s-off you can have and i would not recommend trying to set it back to s-on. i also have a rogers evo 3d and i am using the asian RUU ICS and it works fine while letting me keep s-off after flashing it so i would recommend using that RUU if you want ICS.
---------- Post added at 01:10 PM ---------- Previous post was at 01:07 PM ----------
SaHiLzZ said:
But you should be able to get back to S-ON by flashing Gingerbread RUU, no?
Click to expand...
Click to collapse
If he has radio s-off you can flash any RUU you want and it will not turn it back to s-on. Radio s-off is basically permanent since it removes the data in the S58 section of the phone. The fake s-off is the one you need to be careful with which is usually done by using a hacked hboot.
patrick92260 said:
If your cid is original for rogers, the ota may not be working because you are s-off.
Click to expand...
Click to collapse
Bull**** Bull**** Bull****.
For getting OTA you need NOT rooted and NOT deodexed Stock-rom+stock recovery.
Don't try to make S-ON, it is great chance to brick the phone.
And your CID you can get with cid getter from the market.
Patrik, stop it plz.
Is there any risk or advantage to used to Asia one? Not sure I want to have that one my phone over the NA ones.
Would there not be a RUU or this Rogers release? Maybe I should just say the hell with it and just ROM it?
Kemanorell said:
Bull**** Bull**** Bull****.
For getting OTA you need NOT rooted and NOT deodexed Stock-rom+stock recovery.
Don't try to make S-ON, it is great chance to brick the phone.
And your CID you can get with cid getter from the market.
Patrik, stop it plz.
Click to expand...
Click to collapse
lol good one, so why would my evo 3d not flash the ota with a completely stock rom and recovery then with no root? only thing it had was s-off.
---------- Post added at 01:28 PM ---------- Previous post was at 01:24 PM ----------
Crash1912 said:
Is there any risk or advantage to used to Asia one? Not sure I want to have that one my phone over the NA ones.
Would there not be a RUU or this Rogers release? Maybe I should just say the hell with it and just ROM it?
Click to expand...
Click to collapse
It's a toss up if the RUU for rogers or the europe ICS ever shows up here. I am using the asian one and don't really notice any difference over the rogers or europe update. If you have radio s-off you can always downgrade by flashing a gingerbread RUU if you don't like the asian ICS RUU.
I had to run the Rogers gb ruu 1.20.631.2. It then update to 631.3 when I checked for updates. I then booted checked for updates again and it updated to ics. Now I'm running official Rogers ics but as I said I had to roll all the way back 1.20.631.2 and update all the way up from there.
And it does update the hboot but you can downgrade it with ruu previously mentioned.
Sent from my HTC EVO 3D X515a using Tapatalk 2
healer82 said:
I had to run the Rogers gb ruu 1.20.631.2. It then update to 631.3 when I checked for updates. I then booted checked for updates again and it updated to ics. Now I'm running official Rogers ics but as I said I had to roll all the way back 1.20.631.2 and update all the way up from there.
And it does update the hboot but you can downgrade it with ruu previously mentioned.
Sent from my HTC EVO 3D X515a using Tapatalk 2
Click to expand...
Click to collapse
Please link how this is done. I quickly scammed google, and couldnt find how to roll back to this. Looking to do ICS update today sometime.
js593 said:
Please link how this is done. I quickly scammed google, and couldnt find how to roll back to this. Looking to do ICS update today sometime.
Click to expand...
Click to collapse
Somewhere in the development thread there is a thread with shipped ruus already covered to pg86img.zip. Just find the Rogers one and put it on the root of your sd card and boot into bootloader. It will detect it and install 1.20.631.2 then just manually check for updates under about phone. The first update should be 1.20.631.3 which is 9.35mb then xcheck again and it's the ics update around 306 mb. Sorry I can't link to it you'll have to search the development forum. I've had it since it was posted way back when on my phone.
Make sure it's renamed PG86IMG.zip
http://forum.xda-developers.com/showthread.php?p=16450859
Sent from my HTC EVO 3D X515a using Tapatalk 2
healer82 said:
Somewhere in the development thread there is a thread with shipped ruus already covered to pg86img.zip. Just find the Rogers one and put it on the root of your sd card and boot into bootloader. It will detect it and install 1.20.631.2 then just manually check for updates under about phone. The first update should be 1.20.631.3 which is 9.35mb then xcheck again and it's the ics update around 306 mb. Sorry I can't link to it you'll have to search the development forum. I've had it since it was posted way back when on my phone.
Make sure it's renamed PG86IMG.zip
http://forum.xda-developers.com/showthread.php?p=16450859
Sent from my HTC EVO 3D X515a using Tapatalk 2
Click to expand...
Click to collapse
Would this be it?
http://forum.xda-developers.com/showthread.php?p=22501510&highlight=rogers#post22501510
js593 said:
Would this be it?
http://forum.xda-developers.com/showthread.php?p=22501510&highlight=rogers#post22501510
Click to expand...
Click to collapse
That seems to be the one yes.
Sent from my HTC EVO 3D X515a using Tapatalk 2
Ive tried to do this, after downloading it and putting it in the root directory of my phone. Hboot sees the image, stalls there for a few seconds then continues. nothing has happened. Ive tried installing it from CWM, no difference. I think i may need a bit more help then this. After it was detected, i did go and see if it was downgraded in the ABOUT, but it sits at .3 still.
Any ideas?
Okay, so for those people out there that are looking to do this, here's the functional way it worked for me (no errors, nothing happened during the update)
Download the .exe file,
EXECUTE the exe file from windows while the phone is plugges in. This will revert back to .2
Put phone into a wireless network once back up and running.
Update the phone as neccessary.
After the update, i noticed my Hboot when to 1.53.007. Now we just need to wait for a root.
Also, when i went into Recovery from Hboot, i noticed that it didnt do anything, sat there with a pic of my 3D and it had a red exclamation point. should that happen?
no luck
hi i have tried every method here with no go. i have s-on and phone is rooted. can some one post a working rom or something for the love of android!
looks like it was the bootloader it needs to be relocked using rootevo3dnew.zip. which will allow you to downgrade using the ruu file in windows. followed by the 2 updates in about phone and i got the ICS yay! if you have trouble search youtube for the video on "relocking evo 3d bootloader" it was easy, good luck ppl.

[Q] Need help with ICS updation on Unbranded HTC AMAZE in pakistan

hey,
I bought HTC amaze 4g in Lahore, Pakistan. When I bought it, it was locked with S-ON and gingerbread v2.3.4 running on it. I waited for few days so i can get an ICS update through OTA but it never happened and there were slim chances that it would happen. Since i bought it here in Pakistan so there was no carrier attached to my phone so my stock ROM is not made for any specific carrier.
Now i have unlocked the phone (HTC BOOTLOADER METHOD) and then rooted my phone as well. So far its working fine with the stock ROM and everything. Now i want to update my amaze to ICS. i have read so much and tried to find some suitable way to achieve this but failed.
Can anyone guide me through this whole procedure with same case scenario as mine?? I have been sitting infront of the laptop for like 2 consecutive days and i have almost lost all hope to see my amaze running ICS ... so if anyone can help me out with this regard i would be very thankful ...
​
harisjd said:
hey,
I bought HTC amaze 4g in Lahore, Pakistan. When I bought it, it was locked with S-ON and gingerbread v2.3.4 running on it. I waited for few days so i can get an ICS update through OTA but it never happened and there were slim chances that it would happen. Since i bought it here in Pakistan so there was no carrier attached to my phone so my stock ROM is not made for any specific carrier.
Now i have unlocked the phone (HTC BOOTLOADER METHOD) and then rooted my phone as well. So far its working fine with the stock ROM and everything. Now i want to update my amaze to ICS. i have read so much and tried to find some suitable way to achieve this but failed.
Can anyone guide me through this whole procedure with same case scenario as mine?? I have been sitting infront of the laptop for like 2 consecutive days and i have almost lost all hope to see my amaze running ICS ... so if anyone can help me out with this regard i would be very thankful ...
​
Click to expand...
Click to collapse
There's no unbranded RUU for the Amaze, so there isn't really any ICS update for you. The only thing you'll have to do is pick the T-Mobile ICS RUU and go on from there.
yo2boy said:
There's no unbranded RUU for the Amaze, so there isn't really any ICS update for you. The only thing you'll have to do is pick the T-Mobile ICS RUU and go on from there.
Click to expand...
Click to collapse
Thanks alot for your reply. But that is exactly what i want to do and being not able to do ...
Actually let me put my case more appropriately.
1. I want to update my phone to ICS but then again don't want to loose my warranty (which right now is lost as the phone is un locked and rooted). So before going to update my OS i would like to make sure i can un-lock/lock and root/un-root it? un-lock and rooting part is done now its the reverse mechanism i am seeking help with. No custom or stock rom has been flashed on my bootloader so far.
i have CWM recovery installed on my phone i have made a backup of my phone through it, which i saved on my pc as well as the phone storage now that would be my stock roms image please correct me if i am wrong?
2. And then in the second step i would like to update my os to ICS for that reason i had visited this thread
[Collection] HTC Ruby/Amaze 4G Stock ROMs (RUUs & OTAs)
Thread By: krook6023
and from here i can download the RUU you are talking about right? But wouldn't the software build or kernel version difference make it un successful updation?
if not then i will download one of those RUU's but guide me through with the next steps actually required to update it currently the phone is Un-locked, rooted and S-ON.
I know i am being too naive about things but this is my first android device and i really don't want to mess it up but that doesn't mean i haven't done research i have been reading stuff but as long as i don't get it done once by my hand i think i wont be comfortable doing it, hence require guidance.
Thanks in advance.
harisjd said:
Thanks alot for your reply. But that is exactly what i want to do and being not able to do ...
Actually let me put my case more appropriately.
1. I want to update my phone to ICS but then again don't want to loose my warranty (which right now is lost as the phone is un locked and rooted). So before going to update my OS i would like to make sure i can un-lock/lock and root/un-root it? un-lock and rooting part is done now its the reverse mechanism i am seeking help with. No custom or stock rom has been flashed on my bootloader so far.
i have CWM recovery installed on my phone i have made a backup of my phone through it, which i saved on my pc as well as the phone storage now that would be my stock roms image please correct me if i am wrong?
2. And then in the second step i would like to update my os to ICS for that reason i had visited this thread
[Collection] HTC Ruby/Amaze 4G Stock ROMs (RUUs & OTAs)
Thread By: krook6023
and from here i can download the RUU you are talking about right? But wouldn't the software build or kernel version difference make it un successful updation?
if not then i will download one of those RUU's but guide me through with the next steps actually required to update it currently the phone is Un-locked, rooted and S-ON.
I know i am being too naive about things but this is my first android device and i really don't want to mess it up but that doesn't mean i haven't done research i have been reading stuff but as long as i don't get it done once by my hand i think i wont be comfortable doing it, hence require guidance.
Thanks in advance.
Click to expand...
Click to collapse
put the RUU into the root of the sdcard, it must be named PH85IMG.zip to be detected so rename it if it isnt.
turn off fastboot if its on (find it yourself) power off the phone and then power it on by holding pwr and down on the volume key
OR turn off the phone and then pull the battery, replace and power on using pwr and volume down. Then you will see the menu and choose fastboot it will check the RUU and take a long time then it will say press a key to flash the update, do it. wait a while. even if it seems to take a while dont pull the battery. when the phone boots do the setup and then in google market get ES file explorer and use it to rename the PH85IMG.zip to PH85IMG_1.zip or something so it wont detect it and start the long RUU check if you just want to get into the recovery.
I leave the RUU on my sd card just renamed cause ive had some funny problems and this can save your ass
hope this helped,
hyphydragon said:
put the RUU into the root of the sdcard, it must be named PH85IMG.zip to be detected so rename it if it isnt.
turn off fastboot if its on (find it yourself) power off the phone and then power it on by holding pwr and down on the volume key
OR turn off the phone and then pull the battery, replace and power on using pwr and volume down. Then you will see the menu and choose fastboot it will check the RUU and take a long time then it will say press a key to flash the update, do it. wait a while. even if it seems to take a while dont pull the battery. when the phone boots do the setup and then in google market get ES file explorer and use it to rename the PH85IMG.zip to PH85IMG_1.zip or something so it wont detect it and start the long RUU check if you just want to get into the recovery.
I leave the RUU on my sd card just renamed cause ive had some funny problems and this can save your ass
hope this helped,
Click to expand...
Click to collapse
Thanks alot for your reply. Your reply seems to be about the second part of my question which was to update the OS to ICS. But before flashing the new rom i would like to know the steps required for the first part of my question so i can safely revert back to my original stock rom if something bad happens... Just playing safe you know....
If you can help me in that regard as well that would be wonderfull...
hey haris. im also from pakistan..i also giot my amaze just few days ago.. but my amaze is ICS official updated wuth s-on and bootloader locked on T-mobile.. would u plz guide me to how to unlock my bootloader and s-off..
Sent from my HTC_Amaze_4G using xda app-developers app
---------- Post added at 10:47 AM ---------- Previous post was at 10:40 AM ----------
and if i unlock my bootloader by htcdev.. is my phone memory format in the procedure?
Sent from my HTC_Amaze_4G using xda app-developers app
Sent from my HTC_Amaze_4G using xda app-developers app
rcjohn said:
hey haris. im also from pakistan..i also giot my amaze just few days ago.. but my amaze is ICS official updated wuth s-on and bootloader locked on T-mobile.. would u plz guide me to how to unlock my bootloader and s-off..
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Hey,
Well i can help you with unlocking bootloader but i haven't done S-Off mine is still S-On. For unlocking your bootloader i am attaching this word file for you which contains all the steps that are required to unlock your bootloader.
And yes everything on your phones internal memory get wiped once you unlock the and reboot your phone. But things stored on the external memory wont be touched they will stay intact. So before unlocking do make a backup of all your applications and store it on your pc and later on put it back on your sd card and download the recovery software you used before to make backup to do restore this time... Hope that would help you.
Isnt your method for 2.3.6? This guy has ics. I have the same tmobile one I simply used hasoon tool to unlock bootloader install recovery and root. Havent done s=off yet. I dont see the point of s=off and supercid yet. Still confused as to if I need them or not
Sent from my LT18i using xda app-developers app
---------- Post added at 03:07 PM ---------- Previous post was at 03:07 PM ----------
And also from Pakistan
Sent from my LT18i using xda app-developers app
danyal241 said:
Isnt your method for 2.3.6? This guy has ics. I have the same tmobile one I simply used hasoon tool to unlock bootloader install recovery and root. Havent done s=off yet. I dont see the point of s=off and supercid yet. Still confused as to if I need them or not
Click to expand...
Click to collapse
Hi,
Well with regard to just unlocking bootloader the method i sent him would work just fine whether it is ICS or GG. But to install recovery and rooting you need extra steps which he didn't asked for and yes you can do that with the hasoon all in one tool kit.
Can you tell me how you got s-off is wire trick the only way? If so youtube is blocked how can I get that video
Sent from my LT18i using xda app-developers app
danyal241 said:
Can you tell me how you got s-off is wire trick the only way? If so youtube is blocked how can I get that video
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Well daniyal i haven't done S-Off yet as i wrote in my previous posts and what i have read in the articles and discussions its a little cumbersome method to achieve that since i haven't done it myself. For youtube part if you want to use youtube you can download and use hotspot shield. Just download it and connect it and it will allow you to use youtube. I hope this helps you.
Also studying in Pakistan and a question does your phone have tmobile logo? If so then do the ph85img method mentioned earlier (don't worry it won't mess up your device) and you don't really need to s-off if you use 4ext recovery which is the best imo. Right now I am on vacation (back in us) but I come back first week of january if you still can't figure this out or feel too scared just call me up (I will pm you my number) and I can walk you through it on the phone quite simple (and if you want to s-off and I can help you with that too) would do it personally if you were in karachi...
Sent from my HTC_Amaze_4G using xda app-developers app
That will be great whenever you are back. I used titanium backup to remove most tmobile bloatware but would prefer someone to help me out soff and flashing the tmobile free rom with ics
Sent from my LT18i using xda app-developers app
hatlesssandman said:
Also studying in Pakistan and a question does your phone have tmobile logo? If so then do the ph85img method mentioned earlier (don't worry it won't mess up your device) and you don't really need to s-off if you use 4ext recovery which is the best imo. Right now I am on vacation (back in us) but I come back first week of january if you still can't figure this out or feel too scared just call me up (I will pm you my number) and I can walk you through it on the phone quite simple (and if you want to s-off and I can help you with that too) would do it personally if you were in karachi...
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Well this is great to have some to talk to in person. It would be doubly great if you could help out with the original questions i posted in the start of my thread. Thanks.
If you want to update it to ICS, most likely, you will have to S-Off it, as there are probably no RUUs that will work with your phone's CID.
It would be helpful if you told us what your CID was. To obtain the CID code from your phone, use the included attachment, extract it to an accessible location, and then boot your phone in FASTBOOT mode, not the BOOTLOADER mode. After you boot in there, plug in the USB cable to the computer.
After you've done that, double click on the file, CID.bat
Let the command run, and then go in the folder where you extracted the files to, and there should be a file called CIDNUMBER.log. Copy the result and then post it here.
Keylogger_0 said:
If you want to update it to ICS, most likely, you will have to S-Off it, as there are probably no RUUs that will work with your phone's CID.
It would be helpful if you told us what your CID was. To obtain the CID code from your phone, use the included attachment, extract it to an accessible location, and then boot your phone in FASTBOOT mode, not the BOOTLOADER mode. After you boot in there, plug in the USB cable to the computer.
After you've done that, double click on the file, CID.bat
Let the command run, and then go in the folder where you extracted the files to, and there should be a file called CIDNUMBER.log. Copy the result and then post it here.
Click to expand...
Click to collapse
hi,
Thanks alot for your reply. My phones CID is HTC__044
harisjd said:
hi,
Thanks alot for your reply. My phones CID is HTC__044
Click to expand...
Click to collapse
Anyone correct me if I'm wrong, but I don't think there is a RUU you can use with that CID.
It *IS* possible to have the phone update to ICS, but what is *NOT* possible (as of now, because of no RUU for your CID), is to have the phone downgrade back to GB if you need it for warranty purposes. In this scenario, it's an one way street.
You have 2 options really, to leave your phone as is, or to S-OFF the phone in order to update the phone to ICS.
Keylogger_0 said:
Anyone correct me if I'm wrong, but I don't think there is a RUU you can use with that CID.
It *IS* possible to have the phone update to ICS, but what is *NOT* possible (as of now, because of no RUU for your CID), is to have the phone downgrade back to GB if you need it for warranty purposes. In this scenario, it's an one way street.
You have 2 options really, to leave your phone as is, or to S-OFF the phone in order to update the phone to ICS.
Click to expand...
Click to collapse
In either case to update to ICS or to get the locked (not relocked) status back with S-on for warranty purposes i need to do S-off isn't that right?
Well for now my amaze is unlocked and rooted so warranty is out of the window and i cant get it back to locked status it always says relocked so i would like to move forward and then with the help of guys like you i would like to get back to original stock if possible.
so whats the next step for me to get my phone to ICS? If i have to do S-off whats the easiest way of achieving it and after achieving it what are the next steps to perform upgradation?
I have a question. I have s-on and rooted my phone and installed twrp while having unlocked bootloader. I want to install 4ext as someone told me thats better on here. Do i have to uninstall twrp or I can just use hansoon tool to install 4ext and it will over right twrp?
danyal241 said:
I have a question. I have s-on and rooted my phone and installed twrp while having unlocked bootloader. I want to install 4ext as someone told me thats better on here. Do i have to uninstall twrp or I can just use hansoon tool to install 4ext and it will over right twrp?
Click to expand...
Click to collapse
Do share your findings when you do that....

Trouble reverting back to stock RUU

Hi guys, I have the 02 UK version of the HTC ONE X+
I install custom rom and now not finding any that work 100percent I am trying to get back to stock
Found several RUU files one specific for 02 and when running the RUU it says sending and then error message pops up on the program and the phone reboots.
Any ideas? And it doesnt have to be an 02 ruu just one that works.
My info is
Unlocked
ENRC2B_U PVT SHIP S-ON RL
HBOOT-1.35.0000
CPLD-None
MICROP-None
RADIO-3.1204.168.32
Thanks
you must relock bootloader to execute the latest RUU
skdubg said:
you must relock bootloader to execute the latest RUU
Click to expand...
Click to collapse
Hi Yeah I have had it relocked and tried executing the RUU but still no luck.
i have the exact same issue. reason is, last time i used the RUU to get back to stock rom, i used the phone on stock rom for a while and updated my phone to the latest build which updated the HBoot to version 3.5.000 but the currently available RUUs are not compatible with the HBOOT v3.5 so we have to wait for the new RUUs
problem for me is that i have sold the phone and didnt want to send the phone out with a custom rom but time is running out im afraid.
mjenabi2 said:
i have the exact same issue. reason is, last time i used the RUU to get back to stock rom, i used the phone on stock rom for a while and updated my phone to the latest build which updated the HBoot to version 3.5.000 but the currently available RUUs are not compatible with the HBOOT v3.5 so we have to wait for the new RUUs
problem for me is that i have sold the phone and didnt want to send the phone out with a custom rom but time is running out im afraid.
Click to expand...
Click to collapse
So I have to wait for newer RUU to come out for my HBOOT. Thats not too bad if thats all it is.
I have the exact same problem with my O2 UK One +, does anyone have any idea on when these new RUU's will be available? is it possible to downgrade the HBOOT to an older version that will allow the current RUU's to work?
what about ADB sideloading a flashable .zip of the stock firmware? would that work (if we have a flashable zip) or would it kick back an error?
Thanks.
downgrade hboot works only at S-OFF state
OK, is that possible on this phone? it was on my old HTC Magic, although it was hard work!!!!!
no S-OFF at this time for tegra3
Ok, not looking good then, so is there no way for me to get back to a stock rom now? very tempted to recycle the phone and get another one.....
moon-unit said:
I have the exact same problem with my O2 UK One +, does anyone have any idea on when these new RUU's will be available? is it possible to downgrade the HBOOT to an older version that will allow the current RUU's to work?
what about ADB sideloading a flashable .zip of the stock firmware? would that work (if we have a flashable zip) or would it kick back an error?
Thanks.
Click to expand...
Click to collapse
i have a solution for you.
i have a nandroid back up of my phone, you'd need to flash the boot.img in that and then use clockmod recovery to restore the phone to that nandroid and after that flash a stock recovery, relock the bootloader then use OTA updater on the phone to get it uptodate.
it takes a lot more work than just using the RUU, but they arent available right now, so that's what i did because i sold my phone so wanted it to be back to its original state for the new owner
i have the exact phone, mine was locked to O2 as well. i bet you bought it off that guy on ebay for £400?
pm me if you are interested and i will upload the stuff for you.
Found my backup..
here we go...
skdubg said:
you must relock bootloader to execute the latest RUU
Click to expand...
Click to collapse
sweet jebus... so simple, yet I didn't think of that! (I'm pretty new to this whole ROM flashing thing...)
Thanks for that simple suggestion!
skdubg said:
you must relock bootloader to execute the latest RUU
Click to expand...
Click to collapse
I accidentally missed a step when flashing a custom ROM onto my HOX+, and now it hangs at the HTC quietly brilliant screen every time. I know that all I need to do is re-lock the bootloader and use the most recent RUU, but I cannot get my computer to detect my phone to re-lock the bootloader. Is there another way to re-lock the bootloader? If not, what should I do?
mjenabi2 said:
i have a solution for you.
i have a nandroid back up of my phone, you'd need to flash the boot.img in that and then use clockmod recovery to restore the phone to that nandroid and after that flash a stock recovery, relock the bootloader then use OTA updater on the phone to get it uptodate.
it takes a lot more work than just using the RUU, but they arent available right now, so that's what i did because i sold my phone so wanted it to be back to its original state for the new owner
i have the exact phone, mine was locked to O2 as well. i bet you bought it off that guy on ebay for £400?
pm me if you are interested and i will upload the stuff for you.
Click to expand...
Click to collapse
Kool can you send me your back up?
Mjenabi2 can u please share the backup of your phone if is possible.
Thanks a lot
Htc one x plus
So i have a relocked HTC one X+ and i need to know the RUU that i need..
ENCRC2B_U PVT SHIP S-OFF RL
RADIO 3.1204.171.33

[Q] Help with unblock SIM card

Hello, I have the HTC Rezound from Verizon and I need a code to unlock sim card to work on other networks in Europe, if anyone can help I would be happy.
Thank you ...:good:
elvabih said:
Hello, I have the HTC Rezound from Verizon and I need a code to unlock sim card to work on other networks in Europe, if anyone can help I would be happy.
Thank you ...:good:
Click to expand...
Click to collapse
Not to be blunt, but no, you don't need a code... The HTC Rezound, and all recent (last 3-4 years or so) Verizon phones with GSM capability are NOT SIM locked, it was a deal with the FCC and Verizon for use of the 700Mhz spectrum.
To use your Rezound on a local network in Europe, insert the SIM, power up the phone, and go to the Network settings and setup your APN, and in Phone Info set Preferred Network set it to Global, GSM, WCDMA Preferred, or whatever is appropriate for your situation and it should just work.
ok
acejavelin said:
Not to be blunt, but no, you don't need a code... The HTC Rezound, and all recent (last 3-4 years or so) Verizon phones with GSM capability are NOT SIM locked, it was a deal with the FCC and Verizon for use of the 700Mhz spectrum.
To use your Rezound on a local network in Europe, insert the SIM, power up the phone, and go to the Network settings and setup your APN, and in Phone Info set Preferred Network set it to Global, GSM, WCDMA Preferred, or whatever is appropriate for your situation and it should just work.
Click to expand...
Click to collapse
It did not help anything and than again I have a sim locked on the lock screen and can not send sms, I did a lot from this forum but can not seem to solve it though thanks a lot for your help if someone has some idea of a free report
elvabih said:
It did not help anything and than again I have a sim locked on the lock screen and can not send sms, I did a lot from this forum but can not seem to solve it though thanks a lot for your help if someone has some idea of a free report
Click to expand...
Click to collapse
what hboot, radios, and firmware version do you have? You would have to be at 4. something firmware for it to work properly.
acejavelin said:
what hboot, radios, and firmware version do you have? You would have to be at 4. something firmware for it to work properly.
Click to expand...
Click to collapse
andoid version
2.3.4
HTC Sense version
3.5
Software number
2.01.605.11
ERI Version
5
elvabih said:
andoid version
2.3.4
HTC Sense version
3.5
Software number
2.01.605.11
ERI Version
5
Click to expand...
Click to collapse
Yeah, that is really old, even by the Rezounds standards... the Gingerbread firmware does not have the global mode GSM stuff fully enabled, the first ICS release had some functionality, but until the last OTA it wasn't fully working.
You are in a precarious position since most updates have been OTA and require an active Verizon service to get them... You would have to find the RUU for 3.14.605.12 and run it (last full RUU available, it will wipe the phone), then find the OTA zip for 3.14.605.13 and manually load it, followed by 4.5.605.14 which will fully unlock the GSM potential of the phone.
If this is a road you want to go down, I would recommend going S-Off, this would require a customer ROM with an unsecure kernel to do, and at least ICS firmware. Without S-OFF if something goes wrong in the updating procedure you have no way to go back once you get to 3.14.605.12 or higher firmware.
acejavelin said:
Yeah, that is really old, even by the Rezounds standards... the Gingerbread firmware does not have the global mode GSM stuff fully enabled, the first ICS release had some functionality, but until the last OTA it wasn't fully working.
You are in a precarious position since most updates have been OTA and require an active Verizon service to get them... You would have to find the RUU for 3.14.605.12 and run it (last full RUU available, it will wipe the phone), then find the OTA zip for 3.14.605.13 and manually load it, followed by 4.5.605.14 which will fully unlock the GSM potential of the phone.
If this is a road you want to go down, I would recommend going S-Off, this would require a customer ROM with an unsecure kernel to do, and at least ICS firmware. Without S-OFF if something goes wrong in the updating procedure you have no way to go back once you get to 3.14.605.12 or higher firmware.
Click to expand...
Click to collapse
hm S-OFF what it is. the whole process for me is a little complicated had a guide link or something to try if you have help
I've found this
I hope it is ok
https://kickass.so/htc-rezound-s-of...unutbear-infection-2-9-1-how-to-t7770753.html
S-off is
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
That's the old way, but it will work. The easier way is just to get the phone upgraded to Ice Cream Sandwich then get a custom ROM on the phone and use rumrunner S-Off... The real issue right now is your own gingerbread firmware which causes most modern tools to fail.
acejavelin said:
S-off is
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
That's the old way, but it will work. The easier way is just to get the phone upgraded to Ice Cream Sandwich then get a custom ROM on the phone and use rumrunner S-Off... The real issue right now is your own gingerbread firmware which causes most modern tools to fail.
Click to expand...
Click to collapse
have a solution for it
elvabih said:
have a solution for it
Click to expand...
Click to collapse
Is that a question, or a statement?
The "solution" would be to upgrade to 3.14.605.12 via this file: RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9K_release_270509_signed.exe - 604.05 MB
This is a true "RUU" and it is run from your computer, it does a complete re-image of the phone.
This will do a complete wipe of the phone, EVERYTHING will be reset to factory defaults. Once you are on this firmware, you can install the OTA's to get current using this thread's instructions and starting the procedure at Part 2A, Step 5, even though you are not S-OFF yet, this procedure can be followed, just not the "downgrade" portion.
Once you are current, you can flash most custom ROMs and obtain S-OFF. If you are using the Rezound on GSM networks I would recommend staying with a custom ROM though, to minimize MMS issues and the "Unknown SIM" warning.
acejavelin said:
Is that a question, or a statement?
The "solution" would be to upgrade to 3.14.605.12 via this file: RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9K_release_270509_signed.exe - 604.05 MB
This is a true "RUU" and it is run from your computer, it does a complete re-image of the phone.
This will do a complete wipe of the phone, EVERYTHING will be reset to factory defaults. Once you are on this firmware, you can install the OTA's to get current using this thread's instructions and starting the procedure at Part 2A, Step 5, even though you are not S-OFF yet, this procedure can be followed, just not the "downgrade" portion.
Once you are current, you can flash most custom ROMs and obtain S-OFF. If you are using the Rezound on GSM networks I would recommend staying with a custom ROM though, to minimize MMS issues and the "Unknown SIM" warning.
Click to expand...
Click to collapse
I start right away
elvabih said:
I start right away
Click to expand...
Click to collapse
this is not right, every time I try this happen
ERROR [155 ~ 159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
So you run the RUU and follow the directions it gives you and you have a Verizon HTC Rezound model ADR6425?
acejavelin said:
So you run the RUU and follow the directions it gives you and you have a Verizon HTC Rezound model ADR6425?
Click to expand...
Click to collapse
each RUU I started exactly in the order showed the same mistake
and the model is ADR6425LVW
elvabih said:
each RUU I started exactly in the order showed the same mistake
and the model is ADR6425LVW
Click to expand...
Click to collapse
Try this one: https://www.dropbox.com/s/66kpaiyyukjzu0j/RUU_Vigor_VERIZON_WWE_3.14.605.12_PH98IMG.zip?dl=0
rename the file to PH98IMG.zip (be careful of the Windows .zip.zip issue when renaming) and place it on the root of the sd card then boot into Hboot, it should see it and process the archive automatically.
It isn't as clean as the other way, but gets around issues with a bad EXE file since this is all done from the phone, and not a Windows PC.
acejavelin said:
Try this one: https://www.dropbox.com/s/66kpaiyyukjzu0j/RUU_Vigor_VERIZON_WWE_3.14.605.12_PH98IMG.zip?dl=0
rename the file to PH98IMG.zip (be careful of the Windows .zip.zip issue when renaming) and place it on the root of the sd card then boot into Hboot, it should see it and process the archive automatically.
It isn't as clean as the other way, but gets around issues with a bad EXE file since this is all done from the phone, and not a Windows PC.
Click to expand...
Click to collapse
installation aborted
E;Can"t mount /dev/block/mmcblk0p36
elvabih said:
installation aborted
E;Can"t mount /dev/block/mmcblk0p36
Click to expand...
Click to collapse
Umm... yeah... Does this phone boot? /dev/block/mmcblk0p36 is the cache partition... if it can't be mounted you have other issues, is this the only error you receive?
I would find a copy of Amon Ra, not sure if TWRP would work, and boot it with fastboot, then wipe all partitions twice, if any of them can't be wiped or formated, you may have a defective emmc module (the internal storage memory)... Seems quite common these are failing in Rezounds recently, seen at least half-dozen in the last few months, it is not repairable if that is the case.
acejavelin said:
Umm... yeah... Does this phone boot? /dev/block/mmcblk0p36 is the cache partition... if it can't be mounted you have other issues, is this the only error you receive?
I would find a copy of Amon Ra, not sure if TWRP would work, and boot it with fastboot, then wipe all partitions twice, if any of them can't be wiped or formated, you may have a defective emmc module (the internal storage memory)... Seems quite common these are failing in Rezounds recently, seen at least half-dozen in the last few months, it is not repairable if that is the case.
Click to expand...
Click to collapse
delete and format the memory both worked, and only this error with the installation zip file, unless something else now shows only htc phone on the display and can not be on
Try the RUU's again, the one you run from PC first, and if it fails try the ph98img method.

Softbricked my ATT M8 recovered now new issues

Ok I unlocked my loader, then i think what happend was clockwerk installed its self to the boot partition so i was stuck in a loop. I used One_M8_All-In-One_Kit_v to flash a new recovery lower version at that and now i do have a bootable recovery. Problem is now i didn't backup like a dumb arse my working OS and flashed a bad one or maybe the radio or some crap needed to be done first since it was going from 4.4.2 to 5+. In short all i have is recovery and sideload and every rom i download fails to sideload on the phone side and says sucessful on the pc cmd window. Need help with this please
Darthdiddy said:
Ok I unlocked my loader, then i think what happend was clockwerk installed its self to the boot partition so i was stuck in a loop. I used One_M8_All-In-One_Kit_v to flash a new recovery lower version at that and now i do have a bootable recovery. Problem is now i didn't backup like a dumb arse my working OS and flashed a bad one or maybe the radio or some crap needed to be done first since it was going from 4.4.2 to 5+. In short all i have is recovery and sideload and every rom i download fails to sideload on the phone side and says sucessful on the pc cmd window. Need help with this please
Click to expand...
Click to collapse
Wipe data, cache, dalvik, put the appropriate ROM for your carrier/build on SD card or root of internal storage and flash. All else fails run an RUU, bring you back to 100% stock then you can properly reinstall the custom recovery of your choice.
CavyS said:
Wipe data, cache, dalvik, put the appropriate ROM for your carrier/build on SD card or root of internal storage and flash. All else fails run an RUU, bring you back to 100% stock then you can properly reinstall the custom recovery of your choice.
Click to expand...
Click to collapse
I do the proper wipe before flashing my new rom, i'm under the AT&T HTC One M8 section i believe my phone was only @ 4.4.2 before this and here is the bootloader info is :
***Tampered***
***Unlocked***
M8_UL_CA_ PVT SHIP S-On
HBOOT-3.16.0.0000
RADIO-1.16.21331931.LA11G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Apr 18 2014,16:06:33.22985
Tried cm-12-20150131-NIGHTLY-m8 it fails to flash and its on the sd and internal. SkyDragon M8 Sense Rom installs but doesn't boot (tried 2 versions of this rom 700mb and a 1.6gb), believe i tried a couple other roms in my phones section there's only like 9 of them there. I have the stock RUU but fails to detect the phone and fails i think it's meant to sense a turned on functional phone i don't see any kind of recovery method with the stock ruu. All i want is a rom to work with Straight talk the stock os even being unlocked and rooted with su still shoved the default APN down my throat(I even paid 2.99$ for the SQLlite and deleted all other APNs still won't let me check off a APN profile i created as default) making my signal on ST flakey and couldn't get mms to work just picture txting wasn't working. So i went full on like my old HTC One X but dived head first too fast didn't backup my old OS and didn't know firewater was gone till i was at that step of the procedure and it was too late Oh and using TWRP 2.7.1.0 it's the highest i can use before it won't boot.
Darthdiddy said:
I do the proper wipe before flashing my new rom, i'm under the AT&T HTC One M8 section i believe my phone was only @ 4.4.2 before this and here is the bootloader info is :
***Tampered***
***Unlocked***
M8_UL_CA_ PVT SHIP S-On
HBOOT-3.16.0.0000
RADIO-1.16.21331931.LA11G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Apr 18 2014,16:06:33.22985
Tried cm-12-20150131-NIGHTLY-m8 it fails to flash and its on the sd and internal. SkyDragon M8 Sense Rom installs but doesn't boot (tried 2 versions of this rom 700mb and a 1.6gb), believe i tried a couple other roms in my phones section there's only like 9 of them there. I have the stock RUU but fails to detect the phone and fails i think it's meant to sense a turned on functional phone i don't see any kind of recovery method with the stock ruu. All i want is a rom to work with Straight talk the stock os even being unlocked and rooted with su still shoved the default APN down my throat(I even paid 2.99$ for the SQLlite and deleted all other APNs still won't let me check off a APN profile i created as default) making my signal on ST flakey and couldn't get mms to work just picture txting wasn't working. So i went full on like my old HTC One X but dived head first too fast didn't backup my old OS and didn't know firewater was gone till i was at that step of the procedure and it was too late Oh and using TWRP 2.7.1.0 it's the highest i can use before it won't boot.
Click to expand...
Click to collapse
Boot into fastboot, check device manager (if youre on windows) for any unknown drivers and install them if you can. Then run the RUU I posted here http://forum.xda-developers.com/att-htc-one-m8/help/100-stock-4-4-4-ruu-t3017594 which would update you to 4.4.4.
CavyS said:
Boot into fastboot, check device manager (if youre on windows) for any unknown drivers and install them if you can. Then run the RUU I posted here http://forum.xda-developers.com/att-htc-one-m8/help/100-stock-4-4-4-ruu-t3017594 which would update you to 4.4.4.
Click to expand...
Click to collapse
Ok TY i'll try that soon as it downloads, i did finally get RUU_M8_UL_K44_SENSE60_ATT_SECURITY_Cingular_US_1.58.502.1_Radio_1.16.21331931.LA11G_20.31A.4145.02L_release_368350_signed_2
To see the phone and no progress bar shows up on the phone and the program errors out, i even did a full system wipe before i tried it again still to no avail.
CavyS said:
Boot into fastboot, check device manager (if youre on windows) for any unknown drivers and install them if you can. Then run the RUU I posted here http://forum.xda-developers.com/att-htc-one-m8/help/100-stock-4-4-4-ruu-t3017594 which would update you to 4.4.4.
Click to expand...
Click to collapse
Ok tried that stock ruu and it failed i did finally get the phone running on a badseed rom based on 4.4.2 all seems to be working now except i can't send pictures in texts but regular text, calls, and internet work seems to be a common problem with straight talk. So new problem probably a thread somewhere on here about it i'll take a look, thank you for the help
Darthdiddy said:
Ok tried that stock ruu and it failed i did finally get the phone running on a badseed rom based on 4.4.2 all seems to be working now except i can't send pictures in texts but regular text, calls, and internet work seems to be a common problem with straight talk. So new problem probably a thread somewhere on here about it i'll take a look, thank you for the help
Click to expand...
Click to collapse
You'll have to setup your APN and mms message size settings for straight talk, that should fix the text messaging problems.
CavyS said:
You'll have to setup your APN and mms message size settings for straight talk, that should fix the text messaging problems.
Click to expand...
Click to collapse
No matter what message app i try i can't send pictures or large txts my mms is borked and to make matters worse when i installed this rom i must of removed the stock HTC messaging app so i can't find any settings to set the mms size limits. I'd like to figure out how to put the stock messaging app back on the phone without redoing the whole OS
Using Handcent and hangouts and i see no size limit options within the apps or anywhere in the phone settings. Looked up my phone specifically and where the option/s is supposed to be the said section of options is not even there.
If you've got a stock rom downloaded to your computer or sd card you can unzip it and look in system app folder and find the htc messaging apks. Then just install them as system apps and fix permissions.
Sent from my HTC One_M8 using XDA Free mobile app
Before i try and fix my obvious other problems does anyone know how to fix a bad flash of TWRP? I'm used to just adb command line flashing it and never had a issue before on my HTC One X, but seems it a was bad idea and it landed on boot partition and is causing glitches. is there a stock boot i can flash or what do i need?
Darthdiddy said:
but seems it a was bad idea and it landed on boot partition and is causing glitches.?
Click to expand...
Click to collapse
Why do you think that partition, in particular? If you are talking about boot.img, that gets re-flashed any time your flash a ROM.
Try fastboot erase cache, and flash recovery by fastboot. If Clockwork doesn't work, try TWRP.
If you indeed have some corrupted partition(s), your best bet is to RUU. You are non-specific about what error codes, so its hard to help you troubleshoot why the RUU failed. Try a more updated RUU, such as 2.23.
redpoint73 said:
Why do you think that partition, in particular? If you are talking about boot.img, that gets re-flashed any time your flash a ROM.
Try fastboot erase cache, and flash recovery by fastboot. If Clockwork doesn't work, try TWRP.
If you indeed have some corrupted partition(s), your best bet is to RUU. You are non-specific about what error codes, so its hard to help you troubleshoot why the RUU failed. Try a more updated RUU, such as 2.23.
Click to expand...
Click to collapse
Error 155 Unknown Error it says, do i need to relock the bootloader? I could never find a way to S-Off the device so idk if its that or corrupted partition like you said but all my services on my phone crash constantly. But that's better then aokp_task650_m8_kitkat_5.13.2014 that one won't even make it through setup the services crash so often the badseed rom is the only other rom i found that is actually usable. Oh my RUU is 2.0.16 how can i find the newest one for my HTC One M8?
Darthdiddy said:
Error 155 Unknown Error it says, do i need to relock the bootloader?
Oh my RUU is 2.0.16 how can i find the newest one for my HTC One M8?
Click to expand...
Click to collapse
You always need to relock the bootloader to run RUU with s-on. No exceptions.
Hopefully this will clear up your RUU problem, although the RUU number you just supplied above doesn't make any sense (doesn't correspond to any RUU for this device) Where did you find it, and its not what you referenced in Post #5 above.
CavyS already supplied a link for the "latest" AT&T RUU in Post #4 above. Although be aware, that if you are successful in running the latest RUU, it will render sunshine unable to achieve s-off. I suggest RUU to 1.58 or 2.23 (if you want s-off), as those should still be supported by sunshine.
Darthdiddy said:
I could never find a way to S-Off the device
Click to expand...
Click to collapse
Did you try sunshine? Its the only way to s-off at this time.
redpoint73 said:
You always need to relock the bootloader to run RUU with s-on. No exceptions.
Hopefully this will clear up your RUU problem, although the RUU number you just supplied above doesn't make any sense (doesn't correspond to any RUU for this device) Where did you find it, and its not what you referenced in Post #5 above.
CavyS already supplied a link for the "latest" AT&T RUU in Post #4 above. Although be aware, that if you are successful in running the latest RUU, it will render sunshine unable to achieve s-off. I suggest RUU to 1.58 or 2.23 (if you want s-off), as those should still be supported by sunshine.
Did you try sunshine? Its the only way to s-off at this time.
Click to expand...
Click to collapse
Relocked and flashed the ruu utility version said 2.0.16.2014 and is KK 4.4, idk about sunshine as to reading about people with my phone and it not working so for a 25$ leap of faith not sure what to do about that. My phone is running perfect now in a locked down carrier branded and bloatware way lol. Thanks guys, anyway i can tell if sunshine will work on my phone?
Darthdiddy said:
Relocked and flashed the ruu utility version said 2.0.16.2014 and is KK 4.4
Click to expand...
Click to collapse
I think that is the version of the actual installer software (.exe) not the ROM version it will install on your phone. Kitkat for AT&T would be either 1.58 or 2.23. That number will be in the actual file name of the RUU, so just look there (actually a much longer string of numbers starting with 1.58 or 2.23, but I've abbreviated them for convenience).
Darthdiddy said:
idk about sunshine as to reading about people with my phone and it not working so for a 25$ leap of faith not sure what to do about that. My phone is running perfect now in a locked down carrier branded and bloatware way lol. Thanks guys, anyway i can tell if sunshine will work on my phone?
Click to expand...
Click to collapse
You install the sunshine APK, run it, and sunshine will tell you whether it can s-off the phone or not. You won't be charged unless it can successfully s-off the phone. I haven't heard of any folks here that got charged, and sunshine couldn't s-off the device.
redpoint73 said:
I think that is the version of the actual installer software (.exe) not the ROM version it will install on your phone. Kitkat for AT&T would be either 1.58 or 2.23. That number will be in the actual file name of the RUU, so just look there (actually a much longer string of numbers starting with 1.58 or 2.23, but I've abbreviated them for convenience).
You install the sunshine APK, run it, and sunshine will tell you whether it can s-off the phone or not. You won't be charged unless it can successfully s-off the phone. I haven't heard of any folks here that got charged, and sunshine couldn't s-off the device.
Click to expand...
Click to collapse
Wow thanks for the info! Before i try this can after S-OFF/rooting/SU can i install the unlocked/developer ruu from HTC and get HTC OTA and get away from this bloated carrier branded crap? So much in the forums and i can't find a answer to this question anywhere.

Categories

Resources