[Q] Root/Recovery Hapai X720D MTK6577 - Android Q&A, Help & Troubleshooting

I have been looking in different places for a guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
Could someone post a step by step guide to root this device?

Alpuy said:
I have been looking in different places for a guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
Could someone post a step by step guide to root this device?
Click to expand...
Click to collapse
up

Alpuy said:
up
Click to expand...
Click to collapse
up

Alpuy said:
up
Click to expand...
Click to collapse
## (1) and (2) only for recovery if you experience boot failure
1) Download files for x720d here: http://www.4shared.com/rar/YsR3RDi-/..._Recovery.html
Password is Taiwan101
2) Use flashtool 4.0 and recover your x720d
Original link for (1) and (2) is here http://www.mobile01.com/topicdetail....&t=2934258&p=3
##(3) and (4) are the rooting process
3) After flashing the recover images, boot your phone and ensure its not rooted
4) Use TPSparkyRoot to root your x720d. Link is here http://forum.xda-developers.com/show....php?t=1646544
Follow on-screen instructions. Few re-boots to be done before you are rooted.
Walla. Your x720d should be recovered and rooted.

i made a miztake
Hi everyone,
** EDIT **
i have flashed my x720d with the files posted by "haipai" just above
but now my phone wont boot, and i cannot connect it to my computer
i think he's briked but i hope there is a solution...
Thanks for your help

Nitrogin said:
Hi everyone,
** EDIT **
i have flashed my x720d with the files posted by "haipai" just above
but now my phone wont boot, and i cannot connect it to my computer
i think he's briked but i hope there is a solution...
Thanks for your help
Click to expand...
Click to collapse
also happened to me ...: Rolleyes:: Rolleyes:
before the flash must be clear PRELOADER flag!"!!
to repair the damage, you must:
1 - open the phone by removing the screws.
2 - with a piece of wire to ground the point KCOLD connecting to a screw of the case
3 - press download the original firmware
4 - connect the usb cable and insert the battery (keep it IN POSITION TO END)
5 - cross your fingers : D
sorry for my english ... I'm Italian and I translate with google translate

Tanks for the answer but it look not so easy, where do you find the solution, or maybe a tutorial ??
i don't understand the following sentence
with a piece of wire to ground the point KCOLD connecting to a screw of the case
tanks for the help !
ps : i dont wanna brick it again, where do you found a good firmware ?

up

sorry to keep you waiting!
I understand your situation
look at the first image in the bottom of the post
http://forum.xda-developers.com/showthread.php?t=1943442 or http://forum.xda-developers.com/showpost.php?p=32424838&postcount=616
original ROM
H630_77v01.01b02.rar (214.6 MB)
https://mega.co.nz/#!bcMiWbyK!evXGQURvRVkS7mKUSL_royv-cZQd7rsgP4851xNnP8Y
I hope you will be able to solve

hi,
thank you for helping me, but
i must place a cable between the point "kCOL0" and which is the second ?
i dont have a multimeter or any other tool, i hope this is still possible
thanks

the multimeter is "comfortable" but not necessary. just a piece of stiff wire! kcol0 you connect with any part of the metal frame of the phone! for comfort under a screw, so one end of the wire is locked.
edit:
once flashed the rom, change imei codes! I hope you have it written down somewhere ... otherwise seek it from two old phones that do not use more!

Hi: I bricked my Haipai Noble x720d, it's an mt6577, i mange to dissassemble, i found "kcold" point, and now it can be plugged and recognized by usb port. The problem is that i cannot find a factory rom, and i was tryng to flash different roms and always same error with flash tools 4.0, the error is this:
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
i don't know what that means, I dont know how to solve it, please if someone has a factory rom for that model, Help me.

ROM for x720d
http://forum.xda-developers.com/showthread.php?p=42248564#post42248564

igorilla666 said:
also happened to me ...: Rolleyes:: Rolleyes:
before the flash must be clear PRELOADER flag!"!!
to repair the damage, you must:
1 - open the phone by removing the screws.
2 - with a piece of wire to ground the point KCOLD connecting to a screw of the case
3 - press download the original firmware
4 - connect the usb cable and insert the battery (keep it IN POSITION TO END)
5 - cross your fingers : D
sorry for my english ... I'm Italian and I translate with google translate
Click to expand...
Click to collapse
hi
can you explain me where is the point kcold because i have brick my x720d with a wrong rom.
thanks

I don´t understand it.
haipai said:
## (1) and (2) only for recovery if you experience boot failure
1) Download files for x720d here: http://www.4shared.com/rar/YsR3RDi-/..._Recovery.html
Password is Taiwan101
2) Use flashtool 4.0 and recover your x720d
Original link for (1) and (2) is here http://www.mobile01.com/topicdetail....&t=2934258&p=3
##(3) and (4) are the rooting process
3) After flashing the recover images, boot your phone and ensure its not rooted
4) Use TPSparkyRoot to root your x720d. Link is here http://forum.xda-developers.com/show....php?t=1646544
Follow on-screen instructions. Few re-boots to be done before you are rooted.
Walla. Your x720d should be recovered and rooted.
Click to expand...
Click to collapse
I have completed step 1 but I don't understand step 2. Can you put photo's by the steps? Already thanks!

Related

[Q] Dapeng i9800

Hi there. I have this Android Phone from china called Dapeng i9800. Its a 6inch MTK 6575 using ICS 4.03. I wonder where can I find the original rom for this and if there is any tweaks for this phone. Sometimes sluggish when using it as it only has 512 ram.
Thanks in advance
i also have the same model! have you rooted this phone? i can't seem to find instructions on how to go about doing this. can you please point me the right way?
thanks
zaraki kenpachi said:
i also have the same model! have you rooted this phone? i can't seem to find instructions on how to go about doing this. can you please point me the right way?
thanks
Click to expand...
Click to collapse
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
thanks! that was very helpful information! i had some trouble getting windows to connect to my device. kept getting the error: device not found. i suppose it is because i didn't have the proper drivers for the device.
but it is surprisingly easier when done in linux. i just needed to mess around a little with the udev rules.
for the benefit of newbies like me, the instructions provided from that link provided by worldbreaker, i didn't completely follow them. you can choose to install your own superuser and root explorer apk here. in my case, i already installed the Superuser app from the play store even before the rooting process. i also installed Root Explorer separately from the rooting process as well. so no chinese apps for me
now what?
worldbreaker said:
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
Click to expand...
Click to collapse
anyone know how i can flash clockworkmod recovery on this phone? i can't seem to find any information about this.
Please give me a fresh link to this suggested link
worldbreaker said:
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
Click to expand...
Click to collapse
Hi everyone,
I'm trying to root my phone and this file xxx.t-kstore.com/4.0root.rar is no longer available. I hope that someone can plase give me a copy of it or at least let me know where to find it.
Thank you.
Dapeng i9800 firmware found but links dead! Nead russian help!
Hi, I'm from West-Germany and got into trubble:
First of all, I used A Dapeng I9800 for more than 2 years without any problems!
Then, I got my Winter-Blues and cleaned cache from recovery mode!
After that the device didn't boot, because it wanted a passwort to use the cache, which wasn't set. No prob so far!
The solution I found was, that I have to set back to factory default.
But I took off the battery while it was formatting.
Yes, shame on me, I wasn't patient(!) thats my fault!
Now, I've got two new problems:
Is the EMMC bricked?
My russian isn't good enough to enter this forum: china-iphone.ru
to ask these two guys:
BBV1962 http://forum.china-iphone.ru/member12688.html
and:
designed http://forum.china-iphone.ru/member201062.html
via PM, for a working link they posted for my device in their posts on this sides:
http://forum.china-iphone.ru/n9880-6-0-480x854-1-2ghz-android-4-0-3-2x3000-mah-t21999-120.html
http://forum.china-iphone.ru/n9880-6-0-480x854-1-2ghz-android-4-0-3-2x3000-mah-t21999-140.html.
The MTK6575-77 6" original firmware ROM below the posted picture is what I mean.
I hope, someone can get a link for me AND it is not worthless, because the EMMC is broken, as my own backup dosn't work.
Maybee you can get the info hww to flash back exactly, because I get an 4010 format error with the spflash tool.
Thanks a lot

[Q] Need Backup ROM HAIPAI X720D

Hi,
I would like to know if someone who own a HAIPAI X720D can send me a backup of its ROM.
Because the only ROM i find for backup, its in chinese whit screen upside down an ugly screen
Tx for help
ROM for haipai x720d
me too, I need a ROM for this phone.
the chinese one is not working correctly (the screen is completely mirrored, what should be on left is on the right and viceversa)
mourjack said:
Hi,
I would like to know if someone who own a HAIPAI X720D can send me a backup of its ROM.
Because the only ROM i find for backup, its in chinese whit screen upside down an ugly screen
Tx for help
Click to expand...
Click to collapse
Problem Fixed
Hi,
No need anymore problem fixed whit russian forum, realy good
Tx tino81 for Hes ROM on China-iphone.ru
Helo me, i have same ploblem
Friend i have same problem pleade tellme how fixed!! reinstal firmware wirh rigth screen driver? please gime the links and tell me how
mourjack said:
Hi,
No need anymore problem fixed whit russian forum, realy good
Tx tino81 for Hes ROM on China-iphone.ru
Click to expand...
Click to collapse
barto1980 said:
Friend i have same problem pleade tellme how fixed!! reinstal firmware wirh rigth screen driver? please gime the links and tell me how
Click to expand...
Click to collapse
Hi,
Just go on this link http://forum.china-iphone.ru/viewtopic.php?f=70&t=22009&start=80
look for tino81 post download the 2 link
1 - http://forum.china-iphone.ru/away.h...f04a024485dae7d0a7aecd/20121016-0328.rar.html
2 - http://forum.china-iphone.ru/away.h...2f7070a/20120831_e1911_mod_by_Tino81.zip.html
Flash the 1 whit flashtool whit the scaterred for the orginal rom and unchek PRELOADER
Flash 2 whit recovery
Hope it help
UPDATE:
I solved using root browser lite and moving the imei file with this software
----------
great!! thank you mourjack
now my phone works again but unfortunately I cannot fix my IMEIs
I tried with the fixIMEI tool, I created a file and I moved it to /sdcard with adb push
then, following the instructions in a forum, to avoid the cross-link option, I used the command
Code:
dd if=.... of=...
I rebooted the phone but it keeps saying "invalid IMEI"
mourjack said:
Hi,
Just go on this link http://forum.china-iphone.ru/viewtopic.php?f=70&t=22009&start=80
look for tino81 post download the 2 link
1 - http://forum.china-iphone.ru/away.h...f04a024485dae7d0a7aecd/20121016-0328.rar.html
2 - http://forum.china-iphone.ru/away.h...2f7070a/20120831_e1911_mod_by_Tino81.zip.html
Flash the 1 whit flashtool whit the scaterred for the orginal rom and unchek PRELOADER
Flash 2 whit recovery
Hope it help
Click to expand...
Click to collapse
x720d display issue
Help!- I have flashed, and messed up, my x720d and now the screen is not displaying correctly (see attached).
I have tried all the advice I can find on xda- I have downloaded all Taiwan101's files; I have tried the russian downloads recommended here; I have done my best to follow all the instructions posted but cannot fix the screen.
I have the latest flash-tool and am repeatedly trying different combinations of rom but can only make matters worse (bootloop) or at best get back to a fuzzy screen.
Oh and I should mention that the thing can receive calls & makes noises- thats all okay-- ITS JUST THE DAMN SCREEN! Any help would be greatly appreciated.Thx.
mourjack said:
Hi,
Just go on this link []http ://forum.china-iphone. ru/viewtopic.php?f=70&t=22009&start=80[/]
look for tino81 post download the 2 link
1 - []http ://forum.china-iphone.ru/away.htm?http: //narod. ru/disk/62534679001.c470ea274ff04a024485dae7d0a7aecd/20121016-0328.rar.html[/]
2 - []http ://forum.china-iphone. ru/away.htm?http ://narod. ru/disk/62534400001.1a2db631cc7a396e7f017282b2f7070a/20120831_e1911_mod_by_Tino81.zip.html[/]
Flash the 1 whit flashtool whit the scaterred for the orginal rom and unchek PRELOADER
Flash 2 whit recovery
Hope it help
Click to expand...
Click to collapse
Hi i dont understand how do the stpe "Flash 2 whit recovery" shold someone show me ??
Tnks!
forasteiro_ofsky said:
Hi i dont understand how do the stpe "Flash 2 whit recovery" shold someone show me ??
Tnks!
Click to expand...
Click to collapse
Hi: I bricked my Haipai Noble x720d, it's an mt6577, i mange to dissassemble, i found "kcold" point, and now it can be plugged and recognized by usb port. The problem is that i cannot find a factory rom, and i was tryng to flash different roms and always same error with flash tools 4.0, the error is this:
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
i don't know what that means, I dont know how to solve it, please if someone has a factory rom for that model, Help me.
Backup ROM for x720d
Hi: This are links to x720d ROM with 2 different screen drivers.
https://mega.co.nz/#!oFMy3ByC!dCo9QB9u_RCWx4xJC8MWkQ57UDJfSdE_tb2PyEG__h8
https://mega.co.nz/#!NddwiAQZ!F_WRcRnw2x0whk-Nz9DdQ1pFooUWY112fLoqiaEVfvQ
Make sure you have a backup of your imei configuration folder, this will recover your phone from bricked but will erase your imei. Good Luck!!!
haipai
overlaid with a link to proshvku normal screen, and then I turned the screen too! [email protected]: Highfive:
accidently wrong backup-rom
Hi there,
my system broke, so I had to flash a backup. I wrote the system to the disk, but accidently flashed preloader too. Since I got everything restored by this kcal-trick the phone is up and running again. Sadly I have no more wifi. Anyone an idea on this?
I tried to set Imei and Wifi-Mac with different tools. Nothing working for me though. I had to set IMEI software-sided, which worked. For Wifi still nothing working...
Yours
Bored
Hello
I search part of HAIPAI X720D, the volume button exactly.
If you sold your phone, i will interested.
Thanks
David

[Q] Bricked Lenovo K900

Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and

[Q] Please Help me Samsung GT-N9000 note3 clone MTK6275 Brick

My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Korean Clone Version Note 3
ijal7785 said:
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
- Mine is N9000 Note 3 Korean Clone Version MTK6572, and i'm wondering if theres a way to root it. i know there's a lot of android professionals here, and i hope we can find some answers.
- Version 4.3 jellybean
- Baseband Version: MTK6572 MAUI.11AMD.WW1150.SP. V23
- Kernel 2.6.35.7 [email protected] #4
- Software Version: JSS15J.N900ZSUBMI5
- Hardware Version: 1.1.0
Base on CPU Identifier:
- Spreadtrum SC6820a 1000 Mhz
- (fingerprint Brand for Fake Samsung Market)
- SMDK4X12
- Mali-300
Answer
ijal7785 said:
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
There is no support for chinese devices anywhere.
The tutorials are made only for the original device.
Did you back up the stock rom in the first place?
This problem would have been solved if you had a backup of your stock rom.
Now you have no other go than to contact the manufacturer for getting the phone fixed.
Trying other roms will not help you in restoring.
ijal7785 said:
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
try this >
- install ABD Drivers MTK65xx on your pc
- install SP Flash Tools
- download a custom ROM from needrom BUT only for your model N9000, other ROM will be useless
now extract the new ROM and let the window open after extraction
- open SP Flash Tools and load the scatter img file ( is in the extracted folder, navigate to that folder and load the scatter text img file )
- turn your phone off, wait until it vibrates to be sure is off
- press Download button on SP Flash Tools and after 1 sec connect your phone to PC
you'll the Flashing process Start, wait until is finish, it may take more than 10 min in some cases... you'll see a green circle after the process is done
- disconnect your phone and Power On, Voilaa
NovelCaidy said:
- Mine is N9000 Note 3 Korean Clone Version MTK6572, and i'm wondering if theres a way to root it. i know there's a lot of android professionals here, and i hope we can find some answers.
Click to expand...
Click to collapse
use Shuame or Framaroot, if u need help, i'm here...
Guys anybody got a rom for thje same phone...I have it too and its bricked..nothing is working
Ahh!!
Today I faced Same Problem With Same Model But Lots Of Effort Finally I Have Done .
My Working ROM : https://drive.google.com/uc?id=0B35LZs4cp74ZYlRYUnhpejUyZFE
Regards,
filip_pine said:
try this >
- install ABD Drivers MTK65xx on your pc
- install SP Flash Tools
- download a custom ROM from needrom BUT only for your model N9000, other ROM will be useless
now extract the new ROM and let the window open after extraction
- open SP Flash Tools and load the scatter img file ( is in the extracted folder, navigate to that folder and load the scatter text img file )
- turn your phone off, wait until it vibrates to be sure is off
- press Download button on SP Flash Tools and after 1 sec connect your phone to PC
you'll the Flashing process Start, wait until is finish, it may take more than 10 min in some cases... you'll see a green circle after the process is done
- disconnect your phone and Power On, Voilaa
use Shuame or Framaroot, if u need help, i'm here...
Click to expand...
Click to collapse
Hi, thanks for your help, but the phone is still bricked.
When i try to switch power on, nothing happen :crying:
If i push volume button, up or down i can see appear and disappear on device manager the ALCATEL SINGLE RNDIS SINGLE INTERFACE #5 but never MT65xx Preloader driver. :crying:
Seems to be not full dead but i don't know what else i can do.
If you have an advice for us with bricked phone...will be much appreciated.
Very thank you for any help kind. :crying:
D4N13L0N3 said:
Hi, thanks for your help, but the phone is still bricked.
When i try to switch power on, nothing happen :crying:
If i push volume button, up or down i can see appear and disappear on device manager the ALCATEL SINGLE RNDIS SINGLE INTERFACE #5 but never MT65xx Preloader driver. :crying:
Seems to be not full dead but i don't know what else i can do.
If you have an advice for us with bricked phone...will be much appreciated.
Very thank you for any help kind. :crying:
Click to expand...
Click to collapse
you need to install proper driver in order for the PC to recognize the phone, ussualy the Preloader USB VCOM Driver does the job, sometime it takes much more effort, and ADB Drivers need to be installed...
- Proper way to install Preloader USB VCOM Driver -
Connect your phone to PC and wait for the New hardware Found wizzard to appear
Choose i will install the driver by myself, then navigate to the folder location were you have the .ini driver file...
- If the method above dont work, then connect your phone to PC, wait for the New hardware found to appear...
Then right click on My PC and go to the Device Manager
Here you should have a yellow Mark and a phone name or something like this
Right click and choose update driver
Now choose the folder where you have extract the .ini driver file ....
Restart your PC
Open SP FlashTools and be sure that u have the proper ROM for your Phone, otherwise you´ll face DRAM FAIL Error
try this ROM that the guy posted above...
https://drive.google.com/uc?id=0B35LZs4cp74ZYlRYUnhpejUyZFE
filip_pine said:
you need to install proper driver in order for the PC to recognize the phone, ussualy the Preloader USB VCOM Driver does the job, sometime it takes much more effort, and ADB Drivers need to be installed...
- Proper way to install Preloader USB VCOM Driver -
Connect your phone to PC and wait for the New hardware Found wizzard to appear
Choose i will install the driver by myself, then navigate to the folder location were you have the .ini driver file...
- If the method above dont work, then connect your phone to PC, wait for the New hardware found to appear...
Then right click on My PC and go to the Device Manager
Here you should have a yellow Mark and a phone name or something like this
Right click and choose update driver
Now choose the folder where you have extract the .ini driver file ....
Restart your PC
Open SP FlashTools and be sure that u have the proper ROM for your Phone, otherwise you´ll face DRAM FAIL Error
try this ROM that the guy posted above...
Click to expand...
Click to collapse
Thanks, i tried your guide, but with that ROM finaly appear 100% in red color, probably because this phone have MTK6582 and not 6572.
If i use a rom for 6582 at the end of process i can see the DRAM FAIL error
I use this link from XDA for that ROMs:
androidxda.com/download-hdc-stock-rom-models
Any other advice ????
Thanks
D4N13L0N3 said:
Thanks, i tried your guide, but with that ROM finaly appear 100% in red color, probably because this phone have MTK6582 and not 6572.
If i use a rom for 6582 at the end of process i can see the DRAM FAIL error
I use this link from XDA for that ROMs:
androidxda.com/download-hdc-stock-rom-models
Any other advice ????
Thanks
Click to expand...
Click to collapse
ok, take your battery out and tell me the exact model...
filip_pine said:
ok, take your battery out and tell me the exact model...
Click to expand...
Click to collapse
Model: SM-N9000
SSN : N9000GSMH
Made in Korea by Samsung
filip_pine said:
ok, take your battery out and tell me the exact model...
Click to expand...
Click to collapse
This is model:
D4N13L0N3 said:
This is model:
Click to expand...
Click to collapse
try this ROM´s... maybe one of them will make your phone alive ...
http://www.needrom.com/mobile/11-hdc-n9000-note-3/
http://www.needrom.com/mobile/hdc-note-3-mt6582-sm-n9006/
http://www.needrom.com/mobile/hdc-galaxy-note-3-mtk6582-1gb-4gb-2014-kernel/
filip_pine said:
try this ROM´s... maybe one of them will make your phone alive ...
Click to expand...
Click to collapse
Thanks.
I will try, then i tell you if i can use like a paper block
filip_pine said:
try this ROM´s... maybe one of them will make your phone alive ...
Click to expand...
Click to collapse
Nothing, or i mistake all and fail, or i miss some important step.
In attached the errors :
D4N13L0N3 said:
Nothing, or i mistake all and fail, or i miss some important step.
In attached the errors :
Click to expand...
Click to collapse
did u get this error on all the 3 ROM´s ? (((
is there any chance that u can contact your seller from where did you bought the phone ? ask him for the Original ROM...
filip_pine said:
did u get this error on all the 3 ROM´s ? (((
is there any chance that u can contact your seller from where did you bought the phone ? ask him for the Original ROM...
Click to expand...
Click to collapse
No, not all, but everyone go on 100% with red line and not green circle.
I don't understand what error i made.
I think one thing, but the AGENT is right MTK_AllOne_DA.bin or i need to use the one in FIRMWARE folder ??
The files are :
lk.bin
logo.bin
preloader_lcsh82_wet_jb5.bin
What do you thing about it ???
Hi Filip,
i tried to delete USB drivers with USB Deview, after that, i re-charge a new one driver of device and then charge the ROM, this is the result :
The second image appear after about 15 minutes of time out.
D4N13L0N3 said:
Hi Filip,
i tried to delete USB drivers with USB Deview, after that, i re-charge a new one driver of device and then charge the ROM, this is the result :
The second image appear after about 15 minutes of time out.
Click to expand...
Click to collapse
ok, it seems that the problems are not the driver, sience you manage to get the phone recognized by pc... the problem seems to be SP Flash Tool...
my advice would be : reinstall again the windows, install again the USB Preloader VCOM Driver ( the correct way ) and install latest version of SP Flash Tool....
Then try to install again one of the 3 ROM´s that i give you... maybe you have luck buddy, i dont know...
is the only way you could get back your phone.... as you know, these phones are clones and is very hard to find compatible ROM´s and replacements parts....
I was having the ghost touches on my SM-N900 Note 3 Clone and the only solution was to change the digitizer, but : i can´t change it, sience i dont find anywhere Note 3 Clone digitizer replacements... only solution was to put the phone in a box and dont use it... ((
filip_pine said:
my advice would be : reinstall again the windows, install again the USB Preloader VCOM Driver ( the correct way ) and install latest version of SP Flash Tool....
Click to expand...
Click to collapse
I tried on my laptop with new OS installed and no antivirus installed, but the problem is the same.
I tried this tools : SP_Flash_Tool_v5.1352.01
and this : SP Flash Tool v3.1332.0.187
and the tools inside the ROM folder, but nothing. :crying:
Could you link me please the USB Preloader VCOM Driver ( for win7 64bit ), i guess the problem is that i used the bad one
Very thank you again for your help. :good:

[Q] (PLEASE HELP) Bricked CX919 Clone

Hi fellow xda'rs,
I recently bought a Android TV Stick from Geek(app) from china.
I thought I had found a bargain as its specs were:-
2GB RAM
Quad Core CPU
16GB Storage
I managed to snap this up for £24 which I thought was a bargain but when I got the device delivered and was using it I thought it was a little on the slow side so I began to think it was a clone as its default OS theme was not the same as the usual CX919's aswell.
So I wanted to flash the device with a new ROM specifically the Finless 1.6b ROM.
So after following the instructions to installing the ROM using the software provided with the ROM download I managed to install the drivers and get the software to recognize the device. I then wiped the NAND and attempted to install the ROM but it failed .
Now the device does not boot at all and is not recognized by the PC. Windows just states the device is not recognized and has malfunctioned
So I cannot flash any other or what I believer I have found to be the original ROM for the clone device.
The board states its a GXT_D16_LP_V1.8 150310
I have seen that there are tutorials on putting the device into Mask Flash mode by shorting pins but as this is for the genuine CX919 my board is totally different and does not have the pins available to short I think.
In short could anyone help me to put this device into Mask Flash mode and tell me what id need to do and what pins to short please?
I have attached a couple of pictures of the device and board.
lowery91 said:
hi fellow xda'rs,
i recently bought a android tv stick from geek(app) from china.
I thought i had found a bargain as its specs were:-
2gb ram
quad core cpu
16gb storage
i managed to snap this up for £24 which i thought was a bargain but when i got the device delivered and was using it i thought it was a little on the slow side so i began to think it was a clone as its default os theme was not the same as the usual cx919's aswell.
So i wanted to flash the device with a new rom specifically the finless 1.6b rom.
So after following the instructions to installing the rom using the software provided with the rom download i managed to install the drivers and get the software to recognize the device. I then wiped the nand and attempted to install the rom but it failed .
Now the device does not boot at all and is not recognized by the pc. Windows just states the device is not recognized and has malfunctioned
so i cannot flash any other or what i believer i have found to be the original rom for the clone device.
The board states its a gxt_d16_lp_v1.8 150310
i have seen that there are tutorials on putting the device into mask flash mode by shorting pins but as this is for the genuine cx919 my board is totally different and does not have the pins available to short i think.
In short could anyone help me to put this device into mask flash mode and tell me what id need to do and what pins to short please?
I have attached a couple of pictures of the device and board.
Click to expand...
Click to collapse
problem solved! :d
i found the mask flash mode pins to short by trial and error and luckily enough after 1 hour i solved it and got the pc to flash it back to its original rom. If anyone has the same device or issues and would like to know how to solve this i will be happy to help
I would be interested. I have a very similar clone (was supposed to be mk809iv). I have the same board although possibly different chipset.
I haven't bricked it (yet) but will probably do so if I can't find a way to root it. I think it may have come pre-rooted as super su was preinstalled but it has never worked (possibly because the app updated but not the binary?). I have since tried to update the binary and killed the root access completely.
Questions:
Is the ROM you used pre-rooted or rootable (if you've tried)?
Which pins need shorting? I have a button on the side that may be doing the same thing.
OT. How do I upload images or can I not as a new member?
Thanks in advance
any guide? i have the same device or where to download rom?
If your still looking, i might be able to help with a rom, root, and guide.
Thank you but managed to get root the same day you posted. I may still give it a go when my new tv box turns up though if you dont mind posting the info?
For anyone else interested in how I gained root:
1. Search for, download and install kingroot 4.6.5 (this is the version I used, only the latest version is available from official site and cannot be sure next steps will work with it)
2. Run kingroot and follow steps to gain root (dongle may reboot)
3. BUY super sume from play store.
4. Run super sume and follow steps to replace kingroot with super su.
what pins did you short
I am having problems flashing my hdmi stick . I can't get it to flash mode. which pins did you shorted?
can you email me a picture of it? [email protected] thanks
Lowery91 said:
problem solved! :d
i found the mask flash mode pins to short by trial and error and luckily enough after 1 hour i solved it and got the pc to flash it back to its original rom. If anyone has the same device or issues and would like to know how to solve this i will be happy to help
Click to expand...
Click to collapse
Hello,
Having some problems with this stick .Messed up trying to flash a non rooted rom and now I only get a blue icon in rkbatch tool ( after short pin 5-6 ) and nothing happens. Download boot fail errors for a year...
Can someone help me please?
Is it the same model? What version of rkflash tool are you using. And what version are you trying to flash. In my case I didn't need to short any pins.
spade2be said:
Is it the same model? What version of rkflash tool are you using. And what version are you trying to flash. In my case I didn't need to short any pins.
Click to expand...
Click to collapse
I've used several batchtools from 1.5 ( doesn't see my device at all ) to 1.8, different roms ( neomod, finless, stock cx919 roms )hoping one would give me something. All different bootloaders 1.24, 2.08, 2.13,...
I'm going to check mine out. It's been a minute since I used it. But I got the rock chip tool and the img file. I'll zip it up and pm you the link asap.
spade2be said:
I'm going to check mine out. It's been a minute since I used it. But I got the rock chip tool and the img file. I'll zip it up and pm you the link asap.
Click to expand...
Click to collapse
Thnx a million for your help. I've gone bonkers over this hahaha
Lowery91 said:
problem solved! :d
i found the mask flash mode pins to short by trial and error and luckily enough after 1 hour i solved it and got the pc to flash it back to its original rom. If anyone has the same device or issues and would like to know how to solve this i will be happy to help
Click to expand...
Click to collapse
what pins did you short
I am having problems flashing my hdmi stick . I can't get it to flash mode. which pins did you shorted?
can you email me a picture of it? [email protected] thanks

Categories

Resources