[Q] Invalid MMI code???? - Galaxy S III Q&A, Help & Troubleshooting

Hi,
I tried the following codes on my phone:
*#06#
*#1111#
*#1234#
*#7465625#
and all I get is the message: "connection problem or invalid MMI code"
I do not think any codes works on my phone now....
Has anyone else come across this and can help?
This may have nothing to do with it but the Phone was unlocked using Voodoo sim unlock, and the original EFS files were backed up.

Arghh..!
I have now restored the original EFS files [with sim lock], and still no joy.
I am using a UK, Three, SGS3, SotMax V8.0 Rom and Yanks Kernal.
I have just read that newer FW are not compatible with voodoo sim unlock method.
Perhaps this might be related to the problem??
Anyone got any suggestions?

Anybody please?

Which rom are you using? If its anything Aosp based these codes will be likely not to work. If its stock or a Samsung custom rom then it usually should but not all the time. I use omega 33.2 and certain codes don't work. Try using *#0011#. That works on my rom so ...
Sent From My Omega'd Galaxy S3 ...
---------- Post added 1st December 2012 at 12:36 AM ---------- Previous post was 30th November 2012 at 11:50 PM ----------
Sorry I didn't read the second post, if that's the case try doing a full wipe and start again.
Sent From My Omega'd Galaxy S3 ...

AW079 said:
I have now restored the original EFS files [with sim lock], and still no joy.
I am using a UK, Three, SGS3, SotMax V8.0 Rom and Yanks Kernal.
I have just read that newer FW are not compatible with voodoo sim unlock method.
Perhaps this might be related to the problem??
Anyone got any suggestions?
Click to expand...
Click to collapse
Sounds like your Radio is the problem because the codes are not getting to the service provider...switch radios and your problem will go away with the right radio

Almost certainly the feature has been removed from the Rom, go to thread and ask

Hello Every One I Have The Same Problem With My T-PAD
I Tried Every King Of Solution But Still Same Problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Samsung galaxy S2 update disclaimer issues

Hello everybody! Another one from my friend
Samsung galaxy S2 4.0.3 disclaimer will not register. The phone says processing and then error.
He had tried factory reset but it didn't help.
Some features such as the calendar do not sync on occasions
On the settings menu Applications is shown as Apps not sure why as he has compared it to another S2 on 4.0.3 and it shows as Applications.
The phone has been rooted.
The current version is I900XXLPB
I have attached some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
on a rooted phone, the software update will not work anyways, you might just disable it altogether.
Is just he has (my friend) second SGSII and that one was rooted and it updated fine without any problems
madaxas said:
Hello everybody! Another one from my friend
Samsung galaxy S2 4.0.3 disclaimer will not register. The phone says processing and then error.
On the settings menu Applications is shown as Apps not sure why as he has compared it to another S2 on 4.0.3 and it shows as Applications.
The phone has been rooted.
The current version is I900XXLPB
Click to expand...
Click to collapse
XXLPB is Frankienstien version from Intratech isn't it, if so it says on his post that this is Beta firmware so may not work correctly
Tell you frient to go to this thread http://forum.xda-developers.com/showthread.php?t=1075278
and download from the 3rd post either XWLP7 or XXLPW they both contain the generic UK and Ireland CSC package, I have XWLP7 rooted and it works fine.
Once he has the new rom flashed and phone rooted do a factory reset, remember backup, nandroid etc before doing anything.
He can still remove all the bloatware stuff with TB then he may find everything works properly.
If there is a problem with getting root access just downlaod the insecure kernel from Chainfire that matches the version XWLP7 or XXLPW whichever he chose.
Once new rom is installed do a factory reset to clean it out then set it up from scratch, remember to backup etc before doing anything, no back up of data means no restore of data.
EDIT:- Just checked on sammobile and the latest T Mobile version for i9100 is pad I9100BVLPB and csc I9100TMULPC
Thank you very much, he will do that next week and I will post if there is still something wrong (hope not)

[Q] firmware update problem

I decided to buy 2 Samsung Galaxy SIII (for my wife and me), on my wife's one, she had a OTA update but nothing on mine... I decided to connect my SGS3 to my computer in order to see if kies will update the firmware... but nothin... only a message telling: 'GT-I9300' does not support initialising.
My SGSIII (*#1234#):
AP : I9300XXALE8
CP : I9300XXLE8
CSC : I9300AUTALE3
My wife's SGSIII (after update):
AP : I9300XXALF5
CP : I9300XXLF5
CSC : I9300AUTALE3
strange isn't it ?
Please check *#272*imei no# in both phone. If your phone is different then change it.
*It will reset your phone.
Sent from my GT-I9300 using Tapatalk 2
anukilimanoor said:
Please check *#272*imei no# in both phone. If your phone is different then change it.
*It will reset your phone.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Both SGSIII are allready "Swiss" phones with AUT code...
why should I reset them ?
your phone is rooted?
no my phone is not rooted...
but finaly Kies updated my SGS3 10 hours after my wife's one...
:silly:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZapD said:
Both SGSIII are allready "Swiss" phones with AUT code...
why should I reset them ?
Click to expand...
Click to collapse
Just check both are same or not. If it is not same then you have to change it. So if you are changing then it will reset that is what I explained...
---------- Post added at 02:33 PM ---------- Previous post was at 02:33 PM ----------
ZapD said:
no my phone is not rooted...
but finaly Kies updated my SGS3 10 hours after my wife's one...
:silly:
Click to expand...
Click to collapse
Good news. Finally you got the update... In the image you can see AUT that is your CSC.

No data [Tmobile]

ive had my phone for a little while i like it.
flashed numberous roms. no problems.
flashed flappjaxx aosp rom was working fine then all the sudden the data stopped working.
flashed more roms still didnt fix. modems. still nothing.
i flashed a modem and apn goes away and no signal.
baseband unknown.
any suggestions?
im on tmobile and its the att i717
edit:
flashed padawan and got service still no data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's a thread about that from a while back. Google for it, the cure is there.
i found alot of threads. did the same thing. :/.
The usual remedy is return to at&t stock ICS and LF6 modem, set up the phone, then flash the Blaze or Skyrocket modem, then go on to the next rom you want.
Whatever rom you just flashed doesn't have the t-mobile ril and library files in the system.
---------- Post added at 11:59 AM ---------- Previous post was at 11:31 AM ----------
You could try the LG3 modem in the first post before you return to stock.
http://forum.xda-developers.com/showthread.php?p=30335211
Remember to reboot and check for correct APN values.
Mine is absolutely fine with ics blaze and im getting 4g. Did you try loading touchwiz dialer and entering *#2263# and hit automatic. See what that does if still nothing that still odin i guess...
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
i tried to follow the guide for restoring back to default. failed.
installed padawan again. got it to send a few mms.
installed jellybeer and got service but still no data connection
Try flashing a t-mobile modem.
put flasppjaxxs aosp on and everything i working fine
I don't know if this'll help you any, since I'm on at&t, but you might as well try.
I had the same problem a while back. I ended up going to settings - > wireless and networks - > more - > mobile networks and playing with the settings. It turned out I had the wrong apn.

[Q] Not receiving calls while using mobile Data

I am going nuts here I have been searching all over the net and I still have not been able to fix this problem, so I am sorry if this seems like a repeated thread.
I have a Tmobile rooted Samsung Galaxy S III, I was running a nightly Cyanogenmod 10 ROM. Yesterday there was an update for that rom and I downloaded it and installed it, everything was fine and running smoothly until some people started telling me that they were not able to reach me by phone. I tried checking what was wrong and I finally realized that whenever I have my mobile data on or while I am using it I don't receive voice calls. I tried looking everywhere for a way to fix this and I came across the ##DATA# code in which I could turn off the DDTM option but unfortunately my phone doesn't recognize that code.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the message I get every time I try to enter ##3282# code.
I thought that maybe something was wrong with the ROM itself so i decided to browse around here for one for my Tmobile samsung galaxy S 3 and I decided to install this one [ROM][4.2.2][RC1] LiquidSmooth ROMs - d2tmo - 2|14|13
after wiping data/cache and dalvik cache I installed this ROM and this is my current phone info
and still when I am using my mobile data I cant receive calls nor put the ##DATA# code to turn off DDTM.
is there any other way I could access that DDTM option? I am so frustrated or maybe I am doing something wrong.. I do admit I am no pro at this.
Please if any of you could help me I will be greatly appreciated. Thanks in advance
Wrong forum, mate. Ask in the T-Mobile S3 forum. This is for GT-I9300 International S3, not the T-Mobile variant. Anything suggestions you get here might brick your phone. Good luck!
For the record, even I couldn't access the ##DATA# code in GT-I9300.
Sent from my GT-I9300 using xda app-developers app
What version is this ? CM 10.1 ?
There is no stable build out yet, so you might want to report these issues in a CM 10.1 nightly specific thread.
Nightly builds are prone to have issues. That's why they are not called stable

[Q] how to fix error like this

Hi guys i hope xda developers help me with my problem about my samsung galaxy s3 i9300..i rooted my phone last dec and unfortunately i broke it i erase the stock firmware of my phone so wat i did is to search the original firmware for my phone on internet so i found it but after i installed the new stock firmware i incountered the sim card error like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please xda developers help me with this problem thnks in advance guys...
Does the IMEI and serial number in settings, about, status match what is written under your battery?
If either is wrong or blank then search Q&A for possible solutions.
boomboomer said:
Does the IMEI and serial number in settings, about, status match what is written under your battery?
If either is wrong or blank then search Q&A for possible solutions.
Click to expand...
Click to collapse
Yes sir they are the same..
AW: [Q] how to fix error like this
kazuna14 said:
Hi guys i hope xda developers help me with my problem about my samsung galaxy s3 i9300..i rooted my phone last dec and unfortunately i broke it i erase the stock firmware of my phone so wat i did is to search the original firmware for my phone on internet so i found it but after i installed the new stock firmware i incountered the sim card error like this View attachment 1813425
Please xda developers help me with this problem thnks in advance guys...
Click to expand...
Click to collapse
Probably, it can be the SIMcard... Have you tried another SIM? Take your SIM out of the SIII and clean the golden chip on the SIM... You can although try to clean the SIMcontroller on the SIII where you plug in the SIM....
If it doesn't work, have you flashed a i9305 ROM? It can break you SIMreader...
Greetings...
Sent from my GT-I9300 using xda app-developers app

Categories

Resources