I got a brick and using JIG i got to download mode,
and now I'm using Odin.
i try to install syiah it goes all the way nice.
but, when i try to install a ROM "Firefds-GTI9100XWLPY-4.0.4-V10.1" he fails on nand write.
what am i doing wrong ?
eni9ma84 said:
I got a brick and using JIG i got to download mode,
and now I'm using Odin.
i try to install syiah it goes all the way nice.
but, when i try to install a ROM "Firefds-GTI9100XWLPY-4.0.4-V10.1" he fails on nand write.
what am i doing wrong ?
Click to expand...
Click to collapse
You say that Siyah is installed successfully? If yes just grab the CWM version of the ROM (if available) and flash it via CWM.
dont work
Scarface1991 said:
You say that Siyah is installed successfully? If yes just grab the CWM version of the ROM (if available) and flash it via CWM.
Click to expand...
Click to collapse
i cant it wont let me do that.
i can only get it to download mode and install the kernel, cant write to the NAND or install rom
Remember roms are flashed through CWM, not odin.
Sent from my GT-I9100 using Tapatalk 2
i cant
Poroto said:
Remember roms are flashed through CWM, not odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i cant the phone gets stuck on boot
cant start cwm
Related
after long way my phone is back to normal.... standard firmware 2.3.5 when i hooked him on my pc than tell kies theres an update and when i do it he goes to download mode..dowloading.....and restart in cwm. i take reboot and theres no update done so it try to update from the phone self....but no difference. what can be the problem?
Is your device rooted?
Sent from my GT-S5830 using Tapatalk
it was....i unrooted it recently
driftboy said:
after long way my phone is back to normal.... standard firmware 2.3.5 when i hooked him on my pc than tell kies theres an update and when i do it he goes to download mode..dowloading.....and restart in cwm. i take reboot and theres no update done so it try to update from the phone self....but no difference. what can be the problem?
Click to expand...
Click to collapse
*most probably* you would need stock recovery to install update through kies.. search a thread where there is flashable zip of stock recovery and flash it
as its booting into cwm [not tried method but looks same way]
Remove cwm too
And dont use ext4 stock rom
herpderp © aint got money to pay to my fish
Better flash Stock ROM via ODIN.
Sent from my GT-S5830 using Tapatalk
spacecaker said:
Remove cwm too
And dont use ext4 stock rom
herpderp © aint got money to pay to my fish
Click to expand...
Click to collapse
how can i remove cwm?
tj_droid said:
Better flash Stock ROM via ODIN.
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
Have i done. but cwm is still on it...
driftboy said:
Have i done. but cwm is still on it...
Click to expand...
Click to collapse
STRANGE THINGS
proper odin flash will give you stock recovery..
madman_amit said:
STRANGE THINGS
proper odin flash will give you stock recovery..
Click to expand...
Click to collapse
when i flashed to stock the phone was rooted. i unrooted him after
i just flashed him again but the same... cwm is still on. i downloaded my firmware from samfirmware
problem solved..... thanks
Install this from cwm
This was not made by me
After flashing the modem LPW through rom manager, my phone restarted and get stuck in a black screen after the S2 logo.
I can go into download mode but not in recovery, single solution would be try flash a rom through odin?
Happened to me all the time, that's really because the version CWW you has wasn't installed by ROM manager.
Sent from my GT-I9100 using Tapatalk 2
nicholas1520 said:
Happened to me all the time, that's really because the version CWW you has wasn't installed by ROM manager.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
and what solution you have found?
I would reflash through odin.
Then I'd install latest CWM. I would not recommend Rom Manager for this kind of things on an S2. Better to flash directly from recovery mode.
olrait said:
I would reflash through odin.
Then I'd install latest CWM. I would not recommend Rom Manager for this kind of things on an S2. Better to flash directly from recovery mode.
Click to expand...
Click to collapse
I can flash the resurrection version of the CM9 right now or need flash something before?
I think I flashed stock and went back to CM9.
Sent from my GT-I9100 using Tapatalk 2
First off I know I shouldn't have done this before I was sure what I was doing, but I have done it.
I have used chainfires mobile odin pro to flash siyah's latest kernel to my rooted s3. i put the .tar on external sd. Opened mobile odin, opened file, and pressed flash. It said it's dangerous, I pressed continue and the phone immediatly rebooted, and is now stuck on boot loop.
I had never updated the phone from when it first came out, I just rooted and kept stock rom.
Any help much appreciated,
Thanks in advance.
Try to boot into download mode if this works you can flash a stock or custom Rom and kernel through Odin ans it should fix your problem.
Or try to boot into recovery and flash a custom Rom, either way should fix the bootloop.
Sent from my GT-I9300 using xda premium
As a precaution I'm going to ask if you have the American or international model.
Sent from my GT-I9300 using xda premium
delsus said:
Try to boot into download mode if this works you can flash a stock or custom Rom and kernel through Odin ans it should fix your problem.
Or try to boot into recovery and flash a custom Rom, either way should fix the bootloop.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Currently in download mode, going to try to install the latest kernel. Do you think that should work, or should I install custom rom?
phatmodder said:
Currently in download mode, going to try to install the latest kernel. Do you think that should work, or should I install custom rom?
Click to expand...
Click to collapse
I would say you just need to flash the kernel if that's all you changed, the Rom should be fine.
Sent from my GT-I9300 using xda premium
Did you choose kernel>open file>flash?
I'm on the stock leaked ROM & kernel. I hear that Philz kernel has some added functionality but dodgy with nandroid backups. Can anyone confirm this? Are there any other kernels yet which are better for this?
stannoo said:
I'm on the stock leaked ROM & kernel. I hear that Philz kernel has some added functionality but dodgy with nandroid backups. Can anyone confirm this? Are there any other kernels yet which are better for this?
Click to expand...
Click to collapse
apart from 'Philz' kernel no other Custom kernels will wrk with Stock JB leak ma8
OK thanks for that. Guess I'll have to wait. I really want to be able to do a nandroid backup in case things screw up and I have to spend ages restoring everything.
I never had problem with backups on Philz kernel. At least for me to do backup and restore working well.
Can't seem to install this! Just tried flashing the latest - PhilZ-cwm6-XXLSJ-OXX-3.70 - using Mobile Odin. It just reboots the phone and the kernel isn't flashed. Tried it twice with/without the md5 tag but didn't work either time. What am I doing wrong?
stannoo said:
Can't seem to install this! Just tried flashing the latest - PhilZ-cwm6-XXLSJ-OXX-3.70 - using Mobile Odin. It just reboots the phone and the kernel isn't flashed. Tried it twice with/without the md5 tag but didn't work either time. What am I doing wrong?
Click to expand...
Click to collapse
Is your phone rooted properly in order to use mobile odin. Else flash the philz .tar.md5 in download mode via odin.
Sent from my GT-I9100
tariq2kn said:
Is your phone rooted properly in order to use mobile odin. Else flash the philz .tar.md5 in download mode via odin.
Click to expand...
Click to collapse
Well, it's rooted - not sure about properly. I flashed a file (posted on XDA) which rooted it after flashing the ROM. Everything appears to be rooted - Superuser, Busybox, etc
Problem is I can't use Odin cause I'm on a Mac so I have to use the mobile version.
stannoo said:
Well, it's rooted - not sure about properly. I flashed a file (posted on XDA) which rooted it after flashing the ROM. Everything appears to be rooted - Superuser, Busybox, etc
Problem is I can't use Odin cause I'm on a Mac so I have to use the mobile version.
Click to expand...
Click to collapse
Download root checker in playstore,to configure if your phone is rooted properly. Or find a windows pc to flash the kernel via odin..
Sent from my GT-I9100 using xda premium
technicalmetal28 said:
Download root checker in playstore,to configure if your phone is rooted properly. Or find a windows pc to flash the kernel via odin..
Click to expand...
Click to collapse
RootChecker says I have root access. PC isn't an option at the moment unfortunately.
stannoo said:
RootChecker says I have root access. PC isn't an option at the moment unfortunately.
Click to expand...
Click to collapse
What do you use to gain root?the update.zip?flashable true stock cwm?
Sent from my GT-I9100 using xda premium
technicalmetal28 said:
What do you use to gain root?the update.zip?flashable true stock cwm?
Click to expand...
Click to collapse
I used the update.zip
stannoo said:
I used the update.zip
Click to expand...
Click to collapse
Your rooted for sure, i also flash that update.zip on recovery,but the thing is you cant flash a kernel via mobileodin.. i dont have an experience of flashing fw,kernel on M .O,but i read somewhere many users experiencing issues when using that,thats why i prefer windows odin. im not saying dont use M.O.. but if you want a guaranteed flashing just used odin for windows.
Sent from my GT-I9100 using xda premium
technicalmetal28 said:
Your rooted for sure, i also flash that update.zip on recovery,but the thing is you cant flash a kernel via mobileodin.. i dont have an experience of flashing fw,kernel on M .O,but i read somewhere many users experiencing issues when using that,thats why i prefer windows odin. im not saying dont use M.O.. but if you want a guaranteed flashing just used odin for windows.
Click to expand...
Click to collapse
OK cheers.
Just out of interest I just booted into recovery <3e> and I get an error message in red at the bottom:
"E:Failed to seek in /cache/update.zip )invalid argument)
E:signature verification failed"
I'm confused. Does this refer to the root "update.zip" or to the kernel which didn't flash?
stannoo said:
OK cheers.
Just out of interest I just booted into recovery <3e> and I get an error message in red at the bottom:
"E:Failed to seek in /cache/update.zip )invalid argument)
E:signature verification failed"
I'm confused. Does this refer to the root "update.zip" or to the kernel which didn't flash?
Click to expand...
Click to collapse
What does mobile odin says when you flash the kernel lately?and did you rename this
http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip?retrieve_file=1 to update.zip? Before you flash as an update in external storage?
Sent from my GT-I9100 using xda premium
technicalmetal28 said:
What does mobile odin says when you flash the kernel lately?and did you rename this
http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip?retrieve_file=1 to update.zip? Before you flash as an update in external storage?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, I renamed it "update.zip" before moving it to the ex SD and flashing it.
When I try and flash Philz kernel, it selects OK in Mobile Odin but when I press "flash" the phone just reboots normally, not into recovery and the kernel isn't flashed.
stannoo said:
Yes, I renamed it "update.zip" before moving it to the ex SD and flashing it.
When I try and flash Philz kernel, it selects OK in Mobile Odin but when I press "flash" the phone just reboots normally, not into recovery and the kernel isn't flashed.
Click to expand...
Click to collapse
Did you try to download the file again? Download the kernel again,make sure it is finished,and flash it again.. mybe the file you download earlier is unfinished or interupted.
Sent from my GT-I9100 using xda premium
Hello
I have had a look around the forum and i can't seem to find my answer.
I tried to install CrissCross 6.01, all was good untill it got stuck in a boot loop due to an issue with the kernal. I can't get into recovery and wipe the device.
I have tried to use a stock rom, but would i be correct in saying that because the boot loader has been updated to 6.0 I can't use a 5.1.1 recovery?
I have been trying to fix this for 3 days now with no luck, if anyone has any idea what i can do I would really appreciate it.
Thanks
Stuart
Tried smartswitch emergency mode?
jockep said:
Tried smartswitch emergency mode?
Click to expand...
Click to collapse
Yes i tried that and it says it can't initialise.
haxed1982 said:
Yes i tried that and it says it can't initialise.
Click to expand...
Click to collapse
What about download mode? Didnt see you mention it
jockep said:
What about download mode? Didnt see you mention it
Click to expand...
Click to collapse
I can get into download and that is where I have tried a few different stock Roms
The error I get is SV Rev. Check Fail Device : 3 Binary :1 in Odin and from my understanding that is because I'm trying to use a rom that is trying to downgrade the boot loader
I think I need a 6.0 stock rom for this to work but I are t sure
Edit one more thing that confuses me is it will let me flash a 5.1.1 twrp but it still won't let me into recovery.
Thanks
Have you tried to flash bootloader / kernel via Odin?
Try to flash older TWRP, also, via Odin then try to flash 5.1.1.
I'm not 100% sure but I doubt you can flash 5.x.x ROMs from newest TWRP.
Try few things with older recovery and kernel, that shoud wake the device.
As long as you can access download mod you can save your device.
Sent from my SM-G925F using Tapatalk
jockep said:
What about download mode? Didnt see you mention it
Click to expand...
Click to collapse
funky0308 said:
Have you tried to flash bootloader / kernel via Odin?
Try to flash older TWRP, also, via Odin then try to flash 5.1.1.
I'm not 100% sure but I doubt you can flash 5.x.x ROMs from newest TWRP.
Try few things with older recovery and kernel, that shoud wake the device.
As long as you can access download mod you can save your device.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply.
I have only flashed twrp in download mode not touched any kernels. I thought you could only flash a kernel I twrp that's why
Do you have any suggestions as to which kernel and twrp ?
I had same problem yesterday..
I flashed CrisCros ROM for S6 edge and bump into bootloop.
I just restarted device to download mode, flash kernel via Odin (in BL) and all went well.
You have kernel in OP of CrisCross ROM, that's 6.0.1 kernel, flash it and twrp via Odin, restart to recovery and flash ROM.
That should be enough and your device should boot.
You see, there's no bricked device as long as you can flash, fastboot or sideload something to you device..
Sent from my SM-G925F using Tapatalk