As asked any one knows how to set UMS as default on notifications?
Many thanks.
Best Regards,
Jus
jussy said:
As asked any one knows how to set UMS as default on notifications?
Many thanks.
Best Regards,
Jus
Click to expand...
Click to collapse
Settings > Storage once there tap the soft menu key once, if u get the option 'USB computer connection' select the same and in that check ' USB mass connection' and see
Thanks for quick and kind reply, but I knew that.
I'm asking for that old gingerbread option in notification bar when the cable is plugged in instead of the new (ICS/JB) one.
jussy said:
Thanks for quick and kind reply, but I knew that already.
I'm asking for that old gingerbread option in notification bar when the cable is plugged in instead of the new (ICS/JB) one.
Click to expand...
Click to collapse
AFAIK, thats not possible unless some on make a MOD for the same
So I'll wait for that.
Thanks
Sun90 said:
Settings > Storage once there tap the soft menu key once, if u get the option 'USB computer connection' select the same and in that check ' USB mass connection' and see
Click to expand...
Click to collapse
I am using the Chameleon v3.0 BETA, based on the XXLSJ, but I do not have this option in Storage. Is there other ways to set the device as UMS?
Related
Noob question, but does anyone know where to clear the defaults?
Thank you.
mobilebone said:
Noob question, but does anyone know where to clear the defaults?
Thank you.
Click to expand...
Click to collapse
Do you want to change to notification tone or remove it? You can just turn it off in settings if you just wanted it off.
edit: I see the files in /system/media/audio/notifications but don't know where the defaults are for events....sry.
~SB
ShinyBuddha said:
Do you want to change to notification tone or remove it? You can just turn it off in settings if you just wanted it off.
~SB
Click to expand...
Click to collapse
You know, when you select the notification sounds asking you if you wanna use the android sounds or some other files. I clicked the "use by default for this action"
I would like to undo that.
mobilebone said:
You know, when you select the notification sounds asking you if you wanna use the android sounds or some other files. I clicked the "use by default for this action"
I would like to undo that.
Click to expand...
Click to collapse
I haven't seen that prompt myself.
But if it was from an application (or system app) you can go into settings->Applications (click the menu key to filter and see system apps)->Click the application that you want->scroll down and click "Change defaults".
Next time the action is performed it will prompt you for your default action.
~SB
ShinyBuddha said:
I haven't seen that prompt myself.
But if it was from an application (or system app) you can go into settings->Applications (click the menu key to filter and see system apps)->Click the application that you want->scroll down and click "Change defaults".
Next time the action is performed it will prompt you for your default action.
~SB
Click to expand...
Click to collapse
That's where I get stuck. I'm not sure which one is the one for system sounds.
Nevermind...It was the "Android system"
Thank you!
has anyone else found this screen and what to do with it, other than the obvious usb tabs. i having trouble with screen shot but if you tap the left bottom corner of the screen, the notifications window will come up, as you push in the usb cable to charge, this will expand and give you the standard usb notfication. if you press this notification, a settings screen will appear, evev after removal of usb cable.
hopefully screen shots will appear.
Wow I had no idea lol
Ok so if you install anycut you can make a direct link to the development settings so no need to play with a usb cable.
That token setting looks interesting but it just closes to home ill have to play with logcat later
anycut gives a lot of very interesting options... but though I made shortcuts I can't see them in any of my launchers. I have Launcher Pro, the Nook standard one and Zeam. No default... i rather like the options.
But some of the options given by Anycut are keyboard settings and CDMA/GPRS/Network settings.
Wow, has anyone tried that on a non-rooted nook?
That's the main difference to Anycut... of course we can get to these settings once we have rooted. But if this screen can be accessed via a standard nook, that hasn't been "nootered", we can just enable adb there. Whether adb then has root access (as with nooter) I don't know, but still it's a new and easier angle at getting access to the device.
I got it to show up this way:
(0. no USB connected)
1. press the left bottom corner ... this will show you the original android notification bar as popup
2. connect USB cable (to PC and device)
3. you usually can't do anything because of the USB-Mode popup, but since the notification bar has focus we can touch the icon that now appears there.
-> remove cable and you are on the screen shown in OP's post.
ixampl said:
Wow, has anyone tried that on a non-rooted nook?
Click to expand...
Click to collapse
I just tried this on my un-rooted nook, and wasn't able to get the screen to appear.
The USB dialog he's referring to should only appear if you're rooted and ADB is enabled.
This potentially means, however, that the rest of the settings aren't actually removed from the nook, just hidden, and that there should be a way to access them somehow.
Ohhhh that would be nice..
tokyomonster said:
The USB dialog he's referring to should only appear if you're rooted and ADB is enabled.
This potentially means, however, that the rest of the settings aren't actually removed from the nook, just hidden, and that there should be a way to access them somehow.
Click to expand...
Click to collapse
Several options will be more functional if you harvest the "extra" apps installed on the nookcolor emulator that ships as part of the SDK.
Also, if you're curious about how to toggle this setting without the UI,
have a look at /data/property/persist.service.mount.umsauto
How do you actually get the card to mount in the future if you disable auto mounting of it?
BertoJG said:
How do you actually get the card to mount in the future if you disable auto mounting of it?
Click to expand...
Click to collapse
see nookdevs
How do I enable the GB Keyboard ? I downloaded one from the market it installs but I cant seem to figure out how to enable. I'm running virtous and have tried on stock and also on perfect storm and nothing. Am I doing something wrong ?
Menu>settings>Language & Keyboard and enable.
Then go to a place where you'd put text in (messaging app for example) and long press and select input method and select gingiekb
I tried that. I was thinking there was something more to it. Once I get to the menu I see GB Keyboard settings and Htc _ime mod settings and touch input settings I can change the settings but nothing actually happens
beavis1226 said:
I tried that. I was thinking there was something more to it. Once I get to the menu I see GB Keyboard settings and Htc _ime mod settings and touch input settings I can change the settings but nothing actually happens
Click to expand...
Click to collapse
did you enable it?
That's what I'm asking where in there do i do that ? Sorry for being such a noob but I don't see it.
There should be a check mark to enable the keyboard in the settings.
Then go to a place where you'd put text in (messaging app for example) and long press and select input method and select gingerbread keyboard
rusty2663 said:
Then go to a place where you'd put text in (messaging app for example) and long press and select input method and select gingerbread keyboard
Click to expand...
Click to collapse
Thanks that did it.
How do i get this?
Do i need to edit the settings.apk for this?
skyfast said:
How do i get this?
Do i need to edit the settings.apk for this?
Click to expand...
Click to collapse
Goto Settings -> About phone
And keep tapping the "Build number" and it'll show a message as "You are 4 steps away from enabling developer options"
Continue tapping and you'll enable "developer options", this should also enable "Performance" under the settings
what rom are you using if its kitkat use abhiban89 method if its jellybean then go to settings/and scroll you should see developer options enable it and you will see many performance options i recommend if your phone lag check DONT Keep activities and set background limit to 1 pressing thanks is always good good bye
abhibhan89 said:
Goto Settings -> About phone
And keep tapping the "Build number" and it'll show a message as "You are 4 steps away from enabling developer options"
Continue tapping and you'll enable "developer options", this should also enable "Performance" under the settings
Click to expand...
Click to collapse
does this work on stock roms? so i dont need some tweaking?
MaDTH Bistata said:
what rom are you using if its kitkat use abhiban89 method if its jellybean then go to settings/and scroll you should see developer options enable it and you will see many performance options i recommend if your phone lag check DONT Keep activities and set background limit to 1 pressing thanks is always good good bye
Click to expand...
Click to collapse
its ICS based rom, btw i know that tweak already.
skyfast said:
does this work on stock roms? so i dont need some tweaking?
Click to expand...
Click to collapse
Not sure, about the "performance" control being enabled, but it sure enables "developer options" on stock ROM's
Give it a try.
hmmm ok you can install these apps greenify and cleanmaster and smart ram booser and it will be ok
press thanks if i helped you
abhibhan89 said:
Not sure, about the "performance" control being enabled, but it sure enables "developer options" on stock ROM's
Give it a try.
Click to expand...
Click to collapse
lol now i know what do you mean . its not "performance" control but it is "performance control".
This is an option ALL phones i had had. Strangely not in the BT menu.. Like it's hidden by Samsung by choice..! How to get it back/find a way to switch that option? I want to use BT but don't want to be "found"!
GoJo ^^ said:
This is an option ALL phones i had had. Strangely not in the BT menu.. Like it's hidden by Samsung by choice..! How to get it back/find a way to switch that option? I want to use BT but don't want to be "found"!
Click to expand...
Click to collapse
Isn't it always hidden, unless you are in the bluetooth menu or you have already paired the device?
RaZoR No1 said:
Isn't it always hidden, unless you are in the bluetooth menu or you have already paired the device?
Click to expand...
Click to collapse
Bro, you think I'm dumb enough not to have checked that before asking?
Children, don't argue
Use Good Lock and you'll find the option you're looking for under Quickstar.
GoJo ^^ said:
Bro, you think I'm dumb enough not to have checked that before asking?
Click to expand...
Click to collapse
I was curious so I checked it. My phone is not seen when not in Bluetooth menu. So that's good to know. Goodlock/Quickstar will help hiding Bluetooth and or other icons
Ipse_Tase said:
Children, don't argue
Use Good Lock and you'll find the option you're looking for under Quickstar.
Click to expand...
Click to collapse
GoodLock is nice, but neither in Quickstar, neither other section i found the solution to my issue.
I was posting from (gasp!) iPad, now here's a screenshot of my phone (the "W" Canadian variant, but I doubt that makes a difference).
BTW, there's also SystemUI Tuner that can accomplish the same.
EDIT: Oh, I just realized you're not looking to hide the BT icon, but to keep the phone invisible while BT is on. This is not it.
GoJo ^^ said:
Bro, you think I'm dumb enough not to have checked that before asking?
Click to expand...
Click to collapse
But that is the standard for all Android phones for several years.
Do have any of the sharing options enabled, which maybe makes you visible?
RaZoR No1 said:
But that is the standard for all Android phones for several years.
Do have any of the sharing options enabled, which maybe makes you visible?
Click to expand...
Click to collapse
What are those "sharing option" you refer to..? Just having BT turned on makes you visible. This is by default on any device. Usually there's a setting to make your device "'invisible". I checked on older Galaxy : it's there! Sometimes, manufacturer intentionnally HIDE a setting in menu. So i can be reactivated, but i dunno the process.
GoJo ^^ said:
What are those "sharing option" you refer to..? Just having BT turned on makes you visible. This is by default on any device. Usually there's a setting to make your device "'invisible". I checked on older Galaxy : it's there! Sometimes, manufacturer intentionnally HIDE a setting in menu. So i can be reactivated, but i dunno the process.
Click to expand...
Click to collapse
Search for "Nearby sharing" in settings...
This seems to be related to 2 settings - "Nearby sharing" is in Google settings and then there is "Quick share" as well...
Indeed there's such option in "Nearby sharing".. But it's only for this service : Phone's still visible even if you disable visibility in "Nearby sharing".. There should be an option in the BT (sub)menu itself as said.