Hello!
I want to connect my hd2 via wifi with an cisco vpn network! So i have tried the following programs:
- anthavpn
- bluefire
- ncp client
but if i install these programs i can't find a wifi network! If i delete the programs there is no problem to find wifi network!
I think the problem is that the network adapter which is installed whith the program is wrong because without programs there is the network adapter "L2TP NDISWAN Miniport" used and with programs there is a own adapter!
Can anyone help me??
Thank you very much!
Looking for some help with the Cisco Anyconnect Client…
With TW the Client now loads and runs on the 10.1.
The issues are I can’t get the client to see the certificates. I installed the certificates through the Settings Location and Security tab.
According to the guide I should be able to see and select the certificates on the Anyconnect setup screen. I don’t see any certificates.
Does anyone have an idea on how to install the certificates so the client will recognize them?
[email protected] said:
Looking for some help with the Cisco Anyconnect Client…
With TW the Client now loads and runs on the 10.1.
Click to expand...
Click to collapse
Are you using an european 3G model?
Is the Anyconnect for rooted devices or just the samsung standard?
I installed the Anyconnect rooted version and I get the same screenshot. For my corporate network the certificate must be "automatic" but then I don't see any way to set the usergroup and password...
Cisco states that a tun.ko module is required
[email protected] said:
Looking for some help with the Cisco Anyconnect Client…
With TW the Client now loads and runs on the 10.1.
The issues are I can’t get the client to see the certificates. I installed the certificates through the Settings Location and Security tab.
According to the guide I should be able to see and select the certificates on the Anyconnect setup screen. I don’t see any certificates.
Does anyone have an idea on how to install the certificates so the client will recognize them?
Click to expand...
Click to collapse
Silly question, but just to be sure, did you purchase and install the AnyConnect Mobile license on your ASA? You must have that for this to work.
We have it working in our office, no issues.
ccapasso said:
Silly question, but just to be sure, did you purchase and install the AnyConnect Mobile license on your ASA? You must have that for this to work.
We have it working in our office, no issues.
Click to expand...
Click to collapse
Which device do you have? Wifi or 3G?
Didi you install the rooted version or just the samsung version?
Thank you in advance
I verified my version.
I have a 10.1 3G model launched in Italy on 7th july.
I have the cisco AnyConnect Mobile license on my ASA.
My colleagues daily connects with their ipad
I have the famous TW interface but the Cisco client doesn't work.
The anyconnect client for samsung devices doesn't install.
The anyconnct client for rooted android clients installs but then lacks of the tun.co module.
Could you explain which version did you manage to install?
Thank you indeed
I have the US WiFi Only 16GB White Model. My tab is rooted and I have installed the Samsung version, not the root version of the app.
I'm going crazy with this application.
My tab is rooted (odin) and the client simply don't install
Long John Silver said:
I'm going crazy with this application.
My tab is rooted (odin) and the client simply don't install
Click to expand...
Click to collapse
Yesterday I got same problem.
I just found this info in CISCO support:
"Rooting your device could void your device warranty. We do not support rooted devices, nor do we provide instructions to root your device. If you choose to root your device, you do so at your own risk.
The AnyConnect client download for Samsung does not work on rooted devices; you must use the rooted version of AnyConnect on rooted devices."
So as I understand if I rooted my stock GT then "Samsung (< SEP2011) AnyConnect" wount even install. and i need to use "Rooted AnyConnect" version...
AND ...
"Both a tun.ko module and IP tables are required. AnyConnect displays an error message informing you about what is missing when you attempt to establish a VPN. If the tun.ko module is missing, obtain or build it for your corresponding device kernel and place it in the /data/local/kernel_modules/ directory."
here is smth about tun.ko http://forum.xda-developers.com/showthread.php?t=1205353
does anyone got it working on GT 10.1 3G/wifi ?
Tajel said:
Yesterday I got same problem.
I just found this info in CISCO support:
"Rooting your device could void your device warranty. We do not support rooted devices, nor do we provide instructions to root your device. If you choose to root your device, you do so at your own risk.
The AnyConnect client download for Samsung does not work on rooted devices; you must use the rooted version of AnyConnect on rooted devices."
So as I understand if I rooted my stock GT then "Samsung (< SEP2011) AnyConnect" wount even install. and i need to use "Rooted AnyConnect" version...
AND ...
"Both a tun.ko module and IP tables are required. AnyConnect displays an error message informing you about what is missing when you attempt to establish a VPN. If the tun.ko module is missing, obtain or build it for your corresponding device kernel and place it in the /data/local/kernel_modules/ directory."
here is smth about tun.ko http://forum.xda-developers.com/showthread.php?t=1205353
does anyone got it working on GT 10.1 3G/wifi ?
Click to expand...
Click to collapse
Don't mean to resurrect a two month old thread, but Samsung AnyConnect DOES work on some rooted devices. I have it working on my Galaxy SII E4GT. I also have a GTab10.1 LTE, but it is still currently unsupported by the Samsung AnyConnect. :-(
[email protected] said:
Looking for some help with the Cisco Anyconnect Client…
With TW the Client now loads and runs on the 10.1.
The issues are I can’t get the client to see the certificates. I installed the certificates through the Settings Location and Security tab.
According to the guide I should be able to see and select the certificates on the Anyconnect setup screen. I don’t see any certificates.
Does anyone have an idea on how to install the certificates so the client will recognize them?
Click to expand...
Click to collapse
Sorry for such a late answer but I too faced this issue. This is the solution:
Post #12. https://communities.cisco.com/message/76480#76480
I couldn't use Opera to open the link instead I chose HMTL Viewer in the list showing when I clicked the link. AnyConnect launches and it asks if you want to import the certificate.
I am using the Rooted AnyConnect version on my P7500.
Anyone get the Cisco anyconnect to install/work on a non-rooted SG tab10.1?
How to connect to PPTP VPN hosted by Windows Server? I got it not working on my phone but I got it working on Windows
evantkh said:
How to connect to PPTP VPN hosted by Windows Server? I got it not working on my phone but I got it working on Windows
Click to expand...
Click to collapse
Yeah Right, give some details: Whitch server, did You use any app to connect ? SOMETHING?
I'm looking for an app that can handle SSH tunneling with RSA keys instead of a simple password.
It should work like "SSH Tunnel" or "ProxyDroid" (I need to encrypt my internet traffic when using public wi-fi) but with RSA autentication.
Any suggestion?
Thanks
Try connect Bot
morph1us said:
Try connect Bot
Click to expand...
Click to collapse
Can't figure out how to bypass all my internet traffic trought SSH (like I can do with ProxyDroid). Is there a command to use or a special configuration? I can't find anything in the options.
Ok, I managed to use port-forwarding on connect-bot and use ProxyDoroid, as described here.
The problem is that it works only for a few seconds (I suspect it stops working after I successfully connected to the first website I want to visit).
Any suggestion?
zudrev said:
Ok, I managed to use port-forwarding on connect-bot and use ProxyDoroid, as described here.
The problem is that it works only for a few seconds (I suspect it stops working after I successfully connected to the first website I want to visit).
Any suggestion?
Click to expand...
Click to collapse
After long research I found out there was a bug in my SSH server. Now the problem is solved.
Hi there, I am running my own VPN Server and just wanted to add OpenVPN to my Android phone. Is there any way to use OpenVPN automatically when connected to WIFI but not to use it on 3G/4G ?
So far I tried OpenVPN connect on android but didn't see any settings for this.
Thanks
No idea?
I started having the same issue after upgrading to Marshmallow. Has anyone found a a fix?