Hey guys,
In an attempt to root my 10.1 Verizon 4g LTE, I ended up deleting stuff and resetting everything. Now it asks for SIM activation.
I have been Tabless for a few days now and need to fix this asap
Do you guys have any other idea how to bypass the SIM activation?
Thanks for the help.
PS. I do not have a SIM card.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Help an Android brother out!
pleaaaz.
It would help if you actually posted this with an explination of what you did step by step. We cant help if we dont know what you did....
In all the LTE flashing I've done thus far I haven't had an issue like this on my tab. Then again I've never tried flashing any other ROMs than those identified as specific for this tab either (which basically amounts to just the liquidspeed one and the leaked 3.2).
At this point it's not clear if you're on a restored stock ROM or you're using something else since as Tdiliplane pointed out you haven't provided enough information.
More info
Thanks for looking into it. Here is more info:
I have Galaxy Tab 10.1, Verizon 4g LTE version. A couple of weeks ago it updated itself to Android 3.2. I tried rooting it so I could install TouchScreenTune.
Not sure what went wrong, but I was not able to connect to wifi. I decided to do a factory reset.
When the tab restarted, it asked for the sim card. The problem is that I don't have a sim card and I would like to just bypass this message and use the tab as a wifi device.
I read in this forum and others that pushing volume up and down combination or touching the four corners + volume up bypasses the sim card prompt, but this did not work for me.
I hope this helps.
Thanks
Ok now that makes sense and I'm not sure how to help you.
You're basically on stock Verizon ROM right now and it sounds like it's going through the default setup scripts when it's booting up since you did a factory reset.
Maybe one of the other guys out there that has this tab without SIM can chime in, personally I have a data plan so I'm of no help. I'm wondering if flashing one of the stock ROMs for the verizon tab from this site via odin would be helpful or if those too are going to ask for a SIM card.
Read about this one a while ago. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1218686&highlight=bypass+sim+activation
Good Luck
eXiled Killah said:
Read about this one a while ago. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1218686&highlight=bypass+sim+activation
Good Luck
Click to expand...
Click to collapse
I actually followed instruction on that thread, but Unfortunately, it did not work.
Any other ideas, folks?
Thanks
Well, this may sound obvious, but any chance you have a Verizon 4G phone with a micro sim or know someone that does? I've swapped my RAZR micro with my tablet from time to time without issue. As far as I can tell the tablet only goes through the SIM Activation on first setup/new ROM. Once the activation check is done you can run the tablet without the SIM even inserted... I've done that too... just using WiFi instead... just to see what would happen if I decide to cancel VZW services.
eXiled Killah said:
Well, this may sound obvious, but any chance you have a Verizon 4G phone with a micro sim or know someone that does? I've swapped my RAZR micro with my tablet from time to time without issue. As far as I can tell the tablet only goes through the SIM Activation on first setup/new ROM. Once the activation check is done you can run the tablet without the SIM even inserted... I've done that too... just using WiFi instead... just to see what would happen if I decide to cancel VZW services.
Click to expand...
Click to collapse
... nope, I have ATT on my phone, I tried usiing but it didn't work... and I don't know anyone who used verision 4G... I will probably go to a verizon store to see what they say.
This is just weird.
I went to a Verison store. They were really nice. The gave me a new card! they wanted to help by I had to leave. So I came back home inserted the card, about 10 minutes later it says: "There is a problem activaiting your tablet. Please restart and try again, or contact customer service."
I restarted a million time in vain.
The Sim card they gave you may not have been activated or linked to an active account...
"people are bloody ignorant apes" ESTRAGON, Waiting for Godot.
I got it to work. I WAS able to bypass the activation message by tapping the four corners of the SCREEN + volume up. The first time I read about this the guy said touch the top left corner, right corner.... of the tab. Ignorant me, I was touching the external corners of the tab. Till I re-read detials of this method on another forum that explicitly says touch the )(*&^^%%$$#@@@ screen.
Anyway, thank you guys for you help.
Ken_Boolean said:
"people are bloody ignorant apes" ESTRAGON, Waiting for Godot.
Click to expand...
Click to collapse
LMAO!! Well I'm glad you kept trying and got that all sorted.
i have one - and have original sim but device stuck on please wait while your tablet is prepared and dont go to next screen , combination bottom left e.t.с dont working on any official firmware
It worked for me on stock ROM. Are you tapping the corners of the screen or the edges outside of the screen. My mistakes is that I was tapping outside the frame, the metal parts.
Please, I really desperatelly need an advice on this , I bought a used Gtab 10.1 LTE from ebay and since I got it I cant bypass the activation screen , don have sim either to activate it. I tried the four corners plus volume up but nothing happens ... Paid $400 for a useless tablet I belive it comes with stock android but not sure as I cant get to the info screen. Can somebody upload a video showing the activation bypass process ? I think I am doing it well tapping on the four corners of the SCREEN (not the frame) , top left, top right , bottom left (as if i tap back android control), bottom right (as if I tap on the battery status) and then press volume up once, but it only ends increasing the volume ....
Any help is so much appreciated. Thanks!
verizon tab help me please
Ken_Boolean said:
Hey guys,
In an attempt to root my 10.1 Verizon 4g LTE, I ended up deleting stuff and resetting everything. Now it asks for SIM activation.
I have been Tabless for a few days now and need to fix this asap
Do you guys have any other idea how to bypass the SIM activation?
Thanks for the help.
PS. I do not have a SIM card.
Click to expand...
Click to collapse
i have the same problem
Well , never found an easy way (aka secret code or buttons combination) to bypass activation screen on this thing. What I had to to is to root the device, then oppening settings tab with help of the phisycal OEM keyboard then going to about tablet/legal information/open code licences and selecting any text from there then from the upper menu select web search so you get to the web browser so you can google for Home Manager apk , install it and run it, now just select launcher from the app (make sure to set ti as default) and it will get you straight to the home screen where you can now access all device's features and menus but there is still a last step, go to the play store, search for and install titanium backup and freeze or remove UICCActivation process so it wont ever asks for activation again (unless you restore your tab again) and you will be able to fully use your unactivated tablet now. If someone finds an easier method for bypassing activation on this model on android 3.2+ would be great to have it posted here.
I received a Nook Tablet 8GB from a friend that has it messed up pretty badly.
I have tried option 1 on the thread below and was able to boot into CWR and install the partition zip, then i used MiniTool Partition wizard to setup microsd as described, then place the update zip onto microsd.
http://forum.xda-developers.com/showthread.php?p=36492731
Once i put back into nook and boot up it goes to call customer service.
I also tried the following method here
http://forum.xda-developers.com/show....php?t=1663836
I get the green check mark and after reboot i get call customer service.
Again, im not sure what was done to this device before. Just trying to fix it for a friend. Is there anything else i can do?
Should i be using this method?
http://forum.xda-developers.com/show....php?t=1570022
So im assuming there is no hope since there is no response? I see many threads of bricked NT's so im assuming this sort of this is quite common and thats the reason for the lack of response to this thread.
I have worked with android for 2 years now and never bricked a device. I just find it hard to believe this nook tablet cannot be repaired. But again, i have no idea what was done to it.
"Bricked" is a very loose term: without knowing more what's wrong and/or what was done with a tablet it's hard to suggest how to really fix it. Applying a wrong fix often makes the problem worse rather than better.
But it's not necessarily a total loss: until you can figure how to fix it you might try to run CM10 off an SDcard: see http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/, or http://forum.xda-developers.com/showthread.php?t=2061536.
Not sure how i missed that thread but that worked great!
i was about to throw in the towel and you blessed me with that great info. Thank you so much!
I do have one question. got everything setup but when i start the tablet without usb cable plugged in it won't boot. gives me the call customer service msg. Do i have to have usb plugged in everytime i want to boot up now?
Try holding the "n" button when you power up. Press power and at that very first flicker after a few seconds, press and hold n.
bignadad said:
I do have one question. got everything setup but when i start the tablet without usb cable plugged in it won't boot. gives me the call customer service msg. Do i have to have usb plugged in everytime i want to boot up now?
Click to expand...
Click to collapse
Try what Asa suggested above, if it doesn't work then your friend's NT is like mine and many others' -- they only boot into SD with a cold boot and using a powered USB cable. Some people deem this "USB-tethered boot" behavior a manufacturing defect, but it might very well be by design by B&N to discourage people from venturing outside their content wall-garden with easy-to-use 3rd-party ROMs.
Hello everyone,
I seem to be facing a singular issue, but I imagine it is much my fault, and just wanted a confirmation from those more experienced with the device...
I bought an Incredible 4G from eBay, that already had the a copy of Avatar on it, I believe almost the latest update. So when I confirmed the device worked after charging the battery, I flashed the latest copy of Avatar and the JB Gapps, and everything seemed hunkydory.
So, after that, I put in my old SIM, deactivated as I was using a non-4g device, and put it in the Incredible 4G. I started the activation process on the phone, following prompts to reboot the phone (Note: I did not know about CM10.1's issue regarding activation at the time, so one of the possible problems.)
After seemingly failing to activate after the first reboot, I "tried again" and it went down for another reboot. And it stayed down. Completely. I cannot get the phone to start, after charging the battery separately, cannot get into bootloader, nothing. I get QHSUSB_DLOAD when plugged into a computer using USB, but that's it.
A few notes: first time I started up, the screen went to recovery. I didn't think that was an issue; I factory reset from there, and rebooted into Avatar. Second issue: I used ROM updater on the phone to download and install the recovery, as I imagined that there was an automatic checksum done in the process (perhaps it was imagined?), and so when it went to flash, it had some issue, which didn't seem like a problem with the download, and I went through flashing it normally through recovery. Sorry I can't provide more details on that, but everything seemed to work all right after rebooting.
Finally, and this may be irrelevant, I put a 64GB SDXC card in the phone, I had already realized that it could not natively support exFAT, and so left the card in the device until the next time I could boot to recovery to partition it, and went through the activation process with the card inserted and not recognized.
So, I imagine that I have a hard brick, but can't tell if it's completely my fault, because it bricked in a peculiar fashion, at least from what I can tell, as no one seems to have encountered a similar issue after searching for the last 5 days.
If there's any hope for recovery, I would really appreciate some help regarding the device. I'm willing to provide some more info if necessary, and I'd like to find out sooner rather than later if it's a lost cause.
Thanks for any help you guys can give. XDA devs are awesome.
Quite the predicament. Just to clarify, have you tried the following?
1) Remove that super-big MicroSD
2) Remove SIM
3) Remove battery and wait a few minutes; also press the power button while phone is off
4) Only re-inserting the battery, hold vol-down and then hold power until screen comes on (then release power but keep holding vol-down)
I have tried them all; no SIM or SD card has been in there since the issue started. I hadn't tried pushing the power button while the battery was out, but it doesn't seem to change anything. So far, no reaction whatsoever even when holding power + vol down for a few minutes.
ChiqOmar said:
I have tried them all; no SIM or SD card has been in there since the issue started. I hadn't tried pushing the power button while the battery was out, but it doesn't seem to change anything. So far, no reaction whatsoever even when holding power + vol down for a few minutes.
Click to expand...
Click to collapse
Looks like you have a very hard to solve brick, I would like to help, have you tried using fastboot, I mean connected to pc and on that screen issue a fastboot command, also upload a picture of it please since this is new kind of brick, also I found this, our device is supported,
http://unlimited.io/qhsusbdload.htm
Sent from my ADR6410LVW using xda app-developers app
jose51197 said:
Looks like you have a very hard to solve brick, I would like to help, have you tried using fastboot, I mean connected to pc and on that screen issue a fastboot command, also upload a picture of it please since this is new kind of brick, also I found this, our device is supported,
http://unlimited.io/qhsusbdload.htm
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
You can't do fastboot if you can't reach the bootloader, and I've been assured the unlimited.io tool will not help for DLOAD resulting from non-racun related procedures.
Reading forum posts about QHSUSB_DLOAD suggest either jtag is necessary (which might not be worth it considering the phone can be purchased for $150 on ebay) or some strange strokes of luck after letting the phone sit for a bit. ChiqOmar, sorry I don't have great advice; do all the reading you can about QHSUSB_DLOAD mode.
jose51197 said:
Looks like you have a very hard to solve brick, I would like to help, have you tried using fastboot, I mean connected to pc and on that screen issue a fastboot command, also upload a picture of it please since this is new kind of brick, also I found this, our device is supported,
http://unlimited.io/qhsusbdload.htm
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
yes sounds like he is stuck in QSHUSB_DLOAD mode, but i don't know if the resolutiion on unlimited.io will help him or not.they say it's not supported for other reasons other than from running their exploit. it might work though.
mdmower said:
You can't do fastboot if you can't reach the bootloader, and I've been assured the unlimited.io tool will not help for DLOAD resulting from non-racun related procedures.
Reading forum posts about QHSUSB_DLOAD suggest either jtag is necessary (which might not be worth it considering the phone can be purchased for $150 on ebay) or some strange strokes of luck after letting the phone sit for a bit. ChiqOmar, sorry I don't have great advice; do all the reading you can about QHSUSB_DLOAD mode.
Click to expand...
Click to collapse
Maybe port HTC unbricking project to our device, and try to help him using it, since he can't do nothing about it right now, ChiqOmar, you ok with testing it ?, btw download ubuntu connect phone and see if the partitions get mounted, btw looks like you need to flash hboot from that mode, that's all then ruu, I have all the tools to do it if you want to
Sent from my ADR6410LVW using xda app-developers app
mdmower said:
You can't do fastboot if you can't reach the bootloader, and I've been assured the unlimited.io tool will not help for DLOAD resulting from non-racun related procedures.
Reading forum posts about QHSUSB_DLOAD suggest either jtag is necessary (which might not be worth it considering the phone can be purchased for $150 on ebay) or some strange strokes of luck after letting the phone sit for a bit. ChiqOmar, sorry I don't have great advice; do all the reading you can about QHSUSB_DLOAD mode.
Click to expand...
Click to collapse
i was able to bring my rezound back after a hard brick with a hex edited hboot that went bad with this tool but ported for rezound. its worth a try?
Thanks for the help everyone. Yes, although it states quite clearly that the Unlimited.io tool is only meant for devices bricked using their tool, I tried it anyway; obviously, nothing changed.
Though JTAG sounds interesting, I have no idea how to get started with that...nor do I really know if I want to travel down that route just now.
The HTC Unbricking Project sounds promising, but also no idea how to get started as it has not been ported for our device. The partitions don't get mounted in Ubuntu, as I connected it to the computer to use the Unlimited.io tool.
Finally, regarding the nature of the brick itself, I really wish I could pinpoint the issue better to help others if a similar issue happens in the future.
I am actually waiting on a battery, (ordered before I got the phone) and so will try that to see if anything changes.
Thanks again everyone. I've got a feeling I might have to write this one off pretty soon.
ChiqOmar said:
Hello everyone,
I seem to be facing a singular issue, but I imagine it is much my fault, and just wanted a confirmation from those more experienced with the device...
I bought an Incredible 4G from eBay, that already had the a copy of Avatar on it, I believe almost the latest update. So when I confirmed the device worked after charging the battery, I flashed the latest copy of Avatar and the JB Gapps, and everything seemed hunkydory.
So, after that, I put in my old SIM, deactivated as I was using a non-4g device, and put it in the Incredible 4G. I started the activation process on the phone, following prompts to reboot the phone (Note: I did not know about CM10.1's issue regarding activation at the time, so one of the possible problems.)
After seemingly failing to activate after the first reboot, I "tried again" and it went down for another reboot. And it stayed down. Completely. I cannot get the phone to start, after charging the battery separately, cannot get into bootloader, nothing. I get QHSUSB_DLOAD when plugged into a computer using USB, but that's it.
A few notes: first time I started up, the screen went to recovery. I didn't think that was an issue; I factory reset from there, and rebooted into Avatar. Second issue: I used ROM updater on the phone to download and install the recovery, as I imagined that there was an automatic checksum done in the process (perhaps it was imagined?), and so when it went to flash, it had some issue, which didn't seem like a problem with the download, and I went through flashing it normally through recovery. Sorry I can't provide more details on that, but everything seemed to work all right after rebooting.
Finally, and this may be irrelevant, I put a 64GB SDXC card in the phone, I had already realized that it could not natively support exFAT, and so left the card in the device until the next time I could boot to recovery to partition it, and went through the activation process with the card inserted and not recognized.
So, I imagine that I have a hard brick, but can't tell if it's completely my fault, because it bricked in a peculiar fashion, at least from what I can tell, as no one seems to have encountered a similar issue after searching for the last 5 days.
If there's any hope for recovery, I would really appreciate some help regarding the device. I'm willing to provide some more info if necessary, and I'd like to find out sooner rather than later if it's a lost cause.
Thanks for any help you guys can give. XDA devs are awesome.
Click to expand...
Click to collapse
Just got same issue, though for me I installed avatar rom, then rebooted at some point, but instead it hard bricked, can't charge pull battery out/in boot back up removed sim sd card didn't help me either. Any progress yet, or help?
Ill try to get a working htc unbriking Project soon for you guys to try, both please use ubuntu and have a working USB cable, I'm gonna try to reinstall hboot, also have teamviewr installed, also please tell me if you guys are supercid, also no usb 3.0 cable or port please
Sent from my ADR6410LVW using xda app-developers app
Some Information
jose51197 said:
Ill try to get a working htc unbriking Project soon for you guys to try, both please use ubuntu and have a working USB cable, I'm gonna try to reinstall hboot, also have teamviewr installed, also please tell me if you guys are supercid, also no usb 3.0 cable or port please
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
I'm on Ubuntu 13.04 64 Bit, I have a usb cable, Anker Battery Expert separate battery charger. And my Phone is S-OFF DirtyRacun Currently still hard bricked (Not by the Racun though) don't have any 3.0's, i have a onn usb cable and the stock, I also have a Ubuntu 12.04.2 LTS 32 Bit Live DVD. Battery Charging using a battery pack charger. Won't charge through USB
OldNut5 said:
I'm on Ubuntu 13.04 64 Bit, I have a usb cable, Anker Battery Expert separate battery charger. And my Phone is S-OFF DirtyRacun Currently still hard bricked (Not by the Racun though) don't have any 3.0's, i have a onn usb cable and the stock, I also have a Ubuntu 12.04.2 LTS 32 Bit Live DVD.
Click to expand...
Click to collapse
pm me with gtalk email and ill see what i can do, also install teamviewr
OldNut5 said:
I'm on Ubuntu 13.04 64 Bit, I have a usb cable, Anker Battery Expert separate battery charger. And my Phone is S-OFF DirtyRacun Currently still hard bricked (Not by the Racun though) don't have any 3.0's, i have a onn usb cable and the stock, I also have a Ubuntu 12.04.2 LTS 32 Bit Live DVD. Battery Charging using a battery pack charger. Won't charge through USB
Click to expand...
Click to collapse
I lost my first Dinc 4G LTE after I installed CM10.1, was working great for a while and just blinked off, never to recover. No charge light, no response to power button. I also had an aftermarket battery (Hyperion), but it would get so hot charging I replaced it with an OEM HTC battery. I think that damaged the phone.
Since I work with analog electronics, I assume something in the power path physically burned out. I never tried to talk to it via USB, but just cabling it to a computer generates no response.
I went back to the Stock RUU.zip from the unlimited.io site to get the firmware update. During the update it just sort of died. Now I can't get it to charge or get into the bootloader. Help! Please!:crying:
Hi all,
I'm new to this site and am kinda desperate.... I have trouble with my SGH-i717... whenever sim card is in, the device keeps rebooting.... I tried changing the whole sim card reader and no effect on the problem.... Device is now rooted (did it with odin) still no effect... I also tried sim card in other device and it works fine.... Running out of idea here and I'm kinda noob with this... Phone juste came out of warranty by the way and still stuck with 1 and a half year on my damm contract.. So I'll have to buy new phone or pay a 400$ penality for breaking contratc... dammit !!!!
:crying::crying::crying::crying:
Also, the phone has to be kept plugged in (to computer or wall plug) otherwise it keeps rebooting even when sim card is not in...
take a look at this thread if you haven't tried searching. I know you are new and probably looking for any fix. you cant panic here. your going to have to search and read.
in the thread I posted, or any thread, pay attention to the stats of some of the folks posting. you may pay attention to some of the more experienced folks.
I don't know some of the specifics as you did not mention. many factors come into play. you will see talk of what carrier..... it is important
what rom are you currently running or have installed?
how clean is your process of flashing?
how experience are you?
some in the thread are talking about modem......as one posted, "changing your modem is not going to fix problem", he is correct.
I have ran into many problems, only saw SIM message show when I had no SIM in phone. always the failsafe solution has been returning to stock and start over.
you would not be the first person to rush off and think, "im flashing my phone, look at me, im cool". doesn't work like that.
I have always been the more cautious one. I read and make sure I understand. I have all my files in place. heck, I have evan rehearsed the process.
sound stupid???
maybe so, but I have yet to have a problem I couldn't figure out.
could be a "fix permissions" issue
could be a "format system" issue
some developers have specific instruction for flashing their rom, any deviation could cause a myriad of problems.
again, look at experience levels of some of the posters.
http://forum.xda-developers.com/showthread.php?t=2260171
keep us informed as people are reading, but you haven't given any specifics. you have told us what your problem is and what you need fixed, but didn't tell us how you got there.
need that if you want help