Hi all,
Can you help me to upgrade my Greek xperia mini pro (U20i) with the latest upgrade? And which tools/roms etc I will need?
Thanks,
Mobiler
Mobiler74 said:
Hi all,
Can you help me to upgrade my Greek xperia mini pro (U20i) with the latest upgrade? And which tools/roms etc I will need?
Thanks,
Mobiler
Click to expand...
Click to collapse
please look in development thread of xperia mini pro.......Every upgrade available is provided there with proper tools and tutorials.
Prefer using nAa ROM for GB, very stable.
Here the link : Link
Warning : please follow step by step the instruction!
Hit thanks if I help u
What is your phone? You said xperia mini and u20i. U20i is Xperia X10 Mini Pro.
Sent from my E10i using xda app-developers app
pongnamu said:
What is your phone? You said xperia mini and u20i. U20i is Xperia X10 Mini Pro.
Sent from my E10i using xda app-developers app
Click to expand...
Click to collapse
He did say xperia x10 mini pro
#EmpatDuaPuluh said:
Prefer using nAa ROM for GB, very stable.
Here the link : Link
Warning : please follow step by step the instruction!
Hit thanks if I help u
Click to expand...
Click to collapse
Hi,
I have unlocked my bootloader and installed this Kernel U20_nAa-jb-03_2.6.29.6-nAa-jb-03 with this update MiniCM10-4.0.2-mimmi and with these gpapps gapps-jb-nAa-20121119-signed. But after the successfull installation my simcard not recognized and cannot enter in mobile telephone network.
When I am relocking the bootloader with s1tool my U20i is dead and I must install the original firmware again.
What happened with bootloader and my SimCard and not recognized?
Best Regards,
Mobiler.
#EmpatDuaPuluh said:
Prefer using nAa ROM for GB, very stable.
Here the link : Link
Warning : please follow step by step the instruction!
Hit thanks if I help u
Click to expand...
Click to collapse
Also I am needing the correct kernel version and bypass the bootloader which blocks me my telephony network and doesnt recognized my Sim card
.
Best Regards,
Mobiler
Mobiler74 said:
Also I am needing the correct kernel version and bypass the bootloader which blocks me my telephony network and doesnt recognized my Sim card
.
Best Regards,
Mobiler
Click to expand...
Click to collapse
I have successull installed the Kernel 2.6.29..6-nAa 12 / Hydra #1 and MiniCM7-2.2.1-mimmi. I was used the SEtool2 and SEMCBoot to lock and unlock the bootloader.
Thanks all for your assistant.
Best Regards,
Mobiler
Related
Guys, check this out...............................
http://forum.xda-developers.com/showthread.php?t=1296916
The exploit is by the Revolutionary Team.
Dont forget to give them a thumbs up....
Root Confirmed on Xperia Mini Pro 4.0.A.2.335
Okay guide by DooMLoRD is, questions and queries to be posted in the original thread......
http://forum.xda-developers.com/showthread.php?t=1320350
Give him a thumbs up too... Good dev....
Enjoy.....
i rooted my st15i today with this method ...very simple and quick,no need for bootloader unlock,just great
Work flawlessly in Branded, closed bootloader SK17i Mini Pro .377.
Thanks a lot!
Yes yes Worx 100%
Sent from my ST15i using xda premium
xperia mini
Build number: 4.0.2.A.0.42
absolutly works
works like a charm for mini pro with .335 firmware, thanks amey for this info thread
worked perfectly...........xperia active..........thanx to developers
Hows this with warranty? Is it possible to "reroot" it back after rooting?
Thanks
rubikum said:
Hows this with warranty? Is it possible to "reroot" it back after rooting?
Thanks
Click to expand...
Click to collapse
DooMLoRD (second link in original post) provides info on unrooting ( here ).
So your warranty should be safe
This does not wipe your data then?
Sent from my GT-P1000 using XDA App
ani55 said:
This does not wipe your data then?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Didn't for me
Nice & Easy!!!!
Sent from my ST15a using XDA App
it can work on xperia mini pro 4.0.2.A.0.58?
EDIT: Rooted Xperia Mini Pro (Sk17) FW 4.0.A.2.338 now trying to update and root 4.0.2.A.0.58
ADB drivers for sony ericsson: http://developer.sonyericsson.com/wportal/devworld/search-downloads/driver?cc=gb&lc=en
i installed the drivers with right click on .inf files and choose "install" (on windows xp) then connected my phone with usb and adb driver installation started by windows as usually with drivers. (then started the runme.bat)
EDIT2: CONFIRMED WORKING on Xperia Mini Pro (Sk17) 2.3.4 FW 4.0.2.A.0.58
Thanks to Revolutionary Team and DooMLoRD for the amazing work! root'n'roll!
Does this method corrupt the DRM TrackID feature?
Nope it does not......
It doesnt mess with the bootloader in any way......
It worked a charm. Thanks.
Hi all,
Is there a simple way to update my Xperia X10 mini pro U20i from 2.1.1 rooted to ICS 4? I have heard a lot of problems and different ways for update, Which one of all is the safe?
Thanks,
Mobiler.
unlock bootloader, flash nAa ics kernel and install minicm9 3.0.4
is easy
TeckpZi said:
unlock bootloader, flash nAa ics kernel and install minicm9 3.0.4
is easy
Click to expand...
Click to collapse
If it is safe to unlock the bootloader on your phone. If it isn't you end up with a brick instead of a phone.
Look under your batttery u will find like a 10w29 or 11wxx tell me it
Sent from my U20i using xda app-developers app
TeckpZi said:
unlock bootloader, flash nAa ics kernel and install minicm9 3.0.4
is easy
Click to expand...
Click to collapse
LukBoy99 said:
Look under your batttery u will find like a 10w29 or 11wxx tell me it
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
mine are 10W03 So what can i do next bro ?
and can u tell me how to :
- unlock bootloader,
- flash nAa ics kernel
- and install minicm9 3.0.4 ?
Thanks +1
Hi bro. Dose nAa and cm ROM n't support market?
Sent from my U20i using xda premium
same as title .
my friends have a xperia mini . then, he want me to flash hasa miui . so i flash that
but its my careless , when flashing i choose XPERIA MINI PRO . so pointly , i flash sk17i lib modules on st15i aka xperia mini pro
when its booting up , the touchsceen cannot feel any respond
i was re-flashing the hasa miui with carefuly and choose the correct phone. but still same
then i was trying to install Generic official GB and ICS of this phone . but still hal
then trying to repair phone using pc companion but find no answer
any help ?
the phone warranty has run out . so its can be costly
mrahmanda said:
same as title .
my friends have a xperia mini . then, he want me to flash hasa miui . so i flash that
but its my careless , when flashing i choose XPERIA MINI PRO . so pointly , i flash sk17i lib modules on st15i aka xperia mini pro
when its booting up , the touchsceen cannot feel any respond
i was re-flashing the hasa miui with carefuly and choose the correct phone. but still same
then i was trying to install Generic official GB and ICS of this phone . but still hal
then trying to repair phone using pc companion but find no answer
any help ?
the phone warranty has run out . so its can be costly
Click to expand...
Click to collapse
Is your Bootloader Unlocked?
Try flashing the stock kernel from this thread: http://talk.sonymobile.com/thread/41119?start=0&tstart=0
And Flash stock Rom from this thread : http://talk.sonymobile.com/thread/35239?start=0&tstart=0
Be sure to choose wipe data,cache,logs when flashing Rom and choose the correct rom. Good luck,hope this helps.
Bootloader unlocking: http://forum.xda-developers.com/showthread.php?t=1794800
My xpria mini cant use mobile data. What should i do?
Sent from my GT-I9070 using xda app-developers app
hamimi said:
My xpria mini cant use mobile data. What should i do?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
u could start by not hijacking other peoples thread. create your own question thread if u need to.
hamimi said:
My xpria mini cant use mobile data. What should i do?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
you need to properly configure you APNs
hi sir/mam gud day... i am newbie in xperia x10 mini please help me to upgrade my unit
model number : E10i
firmware version 2.1 -update1
basedband version : M76XX-TSNCJOLYM-53404015
kernel version : 2.6.29
build number: 2.1.1.A.0.6
please guide me step by step... also please give me the direct link for download....
Thanks in advance........ hope to solve my problem...
1. Download flashtool
2. Root it
3. Unlock bootloader
4. Download custom ROM and custom kernel
5. Flash custom kernel
6. Flash custom ROM
Enjoy
Sent from my Xperia Mini
sirrr
sir were is the Download link........
hey dude if u want to upgrade your phone, please choose minicm7 rom and follow the installation guide... search this forum on the top, minicm7 for x10 mini
Sent from my E10i using xda app-developers app
spidermike2323 said:
sir were is the Download link........
Click to expand...
Click to collapse
androxyde.github.com
Sent from my Xperia Mini using xda premium
Anyone pls help me... I'm using xperia mini pro SK17i. During installing cutom Rom I wiped all the datas. After i tried to install android 4.1.2. But it stopps by saying operation unsuccessful. Now, when i switched ON my mobile, It still remain as SONY logo itself and not even turning ON, pls anyone help me...
If U did try to install JB then U should have unlock Your bootloader. That means You have recovery which is build in kernel, so just copy any other JB ROM and install it. If You did not unlock BL then try flashtool and install ICS, cause JB won't run on stock kernel.
Can you help me with step by step instruction with links... Plz...
there are a lot more information that u should give us in the first place.
like: which rom u want to flash?
bootlodder unlocked?
ur base os?
and many more
Rom- Xperia nexus
Kernel- kappa
Phone- xperia mini ST15i unlocked
stuck at sony logo when installing cm roms?
let me guess, he doesn't even unlock bootloader and flash the provided kernel.
Root my phone
I'm using sony ericsson xperia min pro.. My bootloader unlocker status is yes. Can anyone help me to how to unlock my bootloader and how to root my phone...
NaveenMN said:
I'm using sony ericsson xperia min pro.. My bootloader unlocker status is yes. Can anyone help me to how to unlock my bootloader and how to root my phone...
Click to expand...
Click to collapse
if ur unlocked
first u have to flash cm based kernel via flashtools
then u can install cm rom.
and about that root thing u will automatically have it when u flash kernel.
and after install cm rom u have to install gapps too.
Rom- Xperia nexus
Kernel- kappa
Phone- xperia mini ST15i unlocked
NaveenMN said:
I'm using sony ericsson xperia min pro.. My bootloader unlocker status is yes. Can anyone help me to how to unlock my bootloader and how to root my phone...
Click to expand...
Click to collapse
Read the stickies! There's a guide on how to unlock the bootloader!
Afterwards flash a custom kernel and you have root access
Sent from my Nexus 4 running Android 4.2.2
Xperia mini pro
Thanks dude. Now I successfully unlocked and installed SJB
NaveenMN said:
Thanks dude. Now I successfully unlocked and installed SJB
Click to expand...
Click to collapse
How is that sjb? What r the bug?
Sent from my ST15i using xda premium
rabin69x said:
How is that sjb? What r the bug?
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
SJB=Super Jelly Bean
There are no major bugs, check the rom thread for more information and screenshots
Sent from my Nexus 4 running Android 4.3
mihahn said:
SJB=Super Jelly Bean
There are no major bugs, check the rom thread for more information and screenshots
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
ok
Sent from my ST15i using xda premium
Re:
NaveenMN said:
Anyone pls help me... I'm using xperia mini pro SK17i. During installing cutom Rom I wiped all the datas. After i tried to install android 4.1.2. But it stopps by saying operation unsuccessful. Now, when i switched ON my mobile, It still remain as SONY logo itself and not even turning ON, pls anyone help me...
Click to expand...
Click to collapse
hi . you should check your rom's topic and exatcly follow the steps . make sure your rom support your BL type . ( Locked / Unlocked ) if questions still remain post the roms tpic here and i will try to help you
Try to flash a new kernel..might be helpful..:laugh:
SJB look
Every thing works fine. I'll upload the screenshots later. But sometimes automatically the screen gets blank and I once again remove and insert the battery. I dono y? Can anyone help to rectify it? Other than that everything is fine.