Flashed jb from ics boot loader, Was running cyanogen9 was trying to upgrade to 10/nightlies
bootloader 1.00e released by US_epad-10.4.2.15-20120917 A03
Transformer prime
I used to get the dead android symbol thing when RCK booted, but after I downloaded cwm (which i had installed prior, as well) and reflashed it $fastboot -i 0xb05 flash recovery recovery.img
Now It just hangs at "booting recovery" forever..
Googling a lot but not finding anything seemingly relevant of course the error is rather bland, so if anyone had any more information at all i'd be grateful thanks!
bahnsama said:
Flashed jb from ics boot loader, Was running cyanogen9 was trying to upgrade to 10/nightlies
bootloader 1.00e released by US_epad-10.4.2.15-20120917 A03
Transformer prime
I used to get the dead android symbol thing when RCK booted, but after I downloaded cwm (which i had installed prior, as well) and reflashed it $fastboot -i 0xb05 flash recovery recovery.img
Now It just hangs at "booting recovery" forever..
Googling a lot but not finding anything seemingly relevant of course the error is rather bland, so if anyone had any more information at all i'd be grateful thanks!
Click to expand...
Click to collapse
what you are saying is a little confusing. what bootloader do you actually have installed?
sounds like you can read through this thread and get your solution
http://forum.xda-developers.com/showthread.php?p=34549595#post34549595
Thanks for the response!
I was using the boot loader described here: bootloader 1.00e released by US_epad-10.4.2.15-20120917 A03
I actually managed to get this working by dropping CWM, I flashed twrp (i believe its called) to recovery partition and flashed another ROM from there..
Using fastboot, I pushed twrp then installed a random JB ROM off the front page here and got it back up and running without even using nvflash, Cheers!
Related
Hello,
I ran NVflash and got all the files (blob.bin, bricksafe.img etc) I needed backed up already.
I'm currently on a ICS .28 firmware.
Now I want to update TWRP and upgrade to the official jellybean firmware..this is where I'm getting stuck. I installed TWRP 2.3.1.0 using the Fastboot method the first time and everything went in flawlessly.
Now that I've done the NVFlash thing, I'm having problems updaing TWRP. Now when I try to do "fastboot blahblah twrp.blob", it says sending recovery okay, writing recovery ok but then it seems like it gets stuck there.
I was able to do "fastboot -i whatever reboot" and the thing would actually reboot.
This time it says "reboot sent" but it doesn't actually reboot.
So I turned off my Transformer manually and turned it back on and now I don't have TWRP 2.3.3.0 ...and 2.3.1.0 is gone. It is now reverted back to regular recovery with fastboot.
What the eff?
Now I did notice that it doesn't say "This device is unlocked" anymore...it has that Android root .28r01 thing from doing the NVFlash...could this be causing the problem? Do I have to run the unlock program again?
Edit: I just went ahead and used the Terminal method and installed the twrp.blob within my Prime. The TWRP website said it was a "not recommended" method, but I went for it anyway. It worked out well.
Hi, I have a TF201, rooted, bootloader unlocked, android 4.1.1.
I recently flashed the recovery image using fastboot and an image of CWM recovery touch (for the TP), it reported as successful. Now when i try to boot into recovery the system hangs at "Booting Recovery kernel image". I tried a earlier version and the same happened.
I was going to try to flash TWRP but there are 2 versions available one for ICS bootloader or one for JB bootloader. I am guessing i am on JB but have no sure way of how to tell and i don't want to risk bricking my system.
My bootloader version is: 1.00e ww_epad-10.4.2.18-20121122 a03
Has anyone had any success flashing a recovery image?
Any help/suggestions would be much appreciated.
Cheers
Solved Thanks to http://forum.xda-developers.com/showthread.php?t=2372050
Hi All,
I have a HTC ONE X+ on O2 UK, it has HBOOT 1.72, S-ON, Radio-3.1204.171.33
I tried being clever and Rooted the phone following hasoon2000 instructions. It was so simple and worked so well i got cocky.
Successfully rooted and installed TWRP 2.6 recovery, used the phone for the whole of 5 minutes before deciding if that was so easy i may as well try flashing a ROM....
I tried CM11 snapshot 15/09/2014, it failed so i restored my back up and all was fine. On the CM wiki i read this bit ..
This device, if unlocked with HTCDev Unlock, must have its kernel flashed via fastboot. Extract boot.img from the CyanogenMod .zip package and flash it from the bootloader with: fastboot flash boot boot.img
Click to expand...
Click to collapse
So i did that, and now i am stuck in boot loop of the HTC quietly Brilliant screen.
I can get into recovery restore my backup but i am still stuck in a boot loop. I assume i need a boot.img with certain information to allow it to go any further. I tried the
RUU RUU_ENRC2B_U_JB_45_O2_UK_1.14.206.13_Radio_3.1204.167.31_release_289474_signed
Click to expand...
Click to collapse
but assume the problem is my HBOOT and Radio are more up to date. (Shows error on screen saying incompatible)
My ideal would be to have a working CM11 Snapshot or CM10.2 on the device, i would settle for stock and back to 4.2.2 and working.
Any help would be great.
Cheers
read this thread: http://forum.xda-developers.com/showthread.php?t=2510836
it tells you to use clockworkmod recovery and not twrp. atm you can't use twrp for kitkat based roms
hold power button until phone turns off. then turn on holding VOL-DOWN to enter bootloader.
now you can flash cwm recovery and boot.img extracted rom.zip
You can only flash a new kernel by booting in the bootloader.... Therefore, whenever you switch rom you'll have to flash kernel compatible to that particular rom.
So, enter bootloader, connect your phone and use command "fastboot flash boot <kernel path>"
crusader727 said:
read this thread: http://forum.xda-developers.com/showthread.php?t=2510836
it tells you to use clockworkmod recovery and not twrp. atm you can't use twrp for kitkat based roms
hold power button until phone turns off. then turn on holding VOL-DOWN to enter bootloader.
now you can flash cwm recovery and boot.img extracted rom.zip
Click to expand...
Click to collapse
Seemingly it was as simple as not being able to use twrp with the latest CM11. Thanks so much, happily on 4.4.4 now.
The thread was from 2012 and the twrp site seemed to indicate otherwise, but soon as i switched recovery it was sorted.
Cheers!
bighead85 said:
Seemingly it was as simple as not being able to use twrp with the latest CM11. Thanks so much, happily on 4.4.4 now.
The thread was from 2012 and the twrp site seemed to indicate otherwise, but soon as i switched recovery it was sorted.
Cheers!
Click to expand...
Click to collapse
Fixing TWRP is on my list of things to do...by the looks of it I need to get to it sooner rather than later
I'm not new to flashing custom roms and rooting Android devices, so I don't think I'm a noob at this. I decided to help my friend unleash the power in his HTC One S by rooting it and giving it a custom recovery, I went through the right processes, Unlocked the phone's bootloader, and flashed the superuser zip and the twrp image, as it didn't seem like a clockworkmod image was compatible with the phone.
I then booted into recovery, wiped/factory reset and then flashed the latest CM11 nightly and got an error in TWRP recovery about the bootloader not been interoperable something like "
Code:
2.15==2.13"
in the error message , fine, I rebooted back into fastboot and checked the HBOOT Version and found out the phone was on HBOOT 1.13 and I think CM11 requires the most recent HBOOT version to work on HTC devices. The phone has got S-Off though.
Now I'm stuck in a bootloop cause I already wiped the OS in TWRP, I have everything in place, the right drivers and all that, I also tried re-installing the stock rom by downloading an HTC One S's RUU file but the device wasn't recognized at all by the RUU installer, I also tried to flash a stock 4.0.x rom as a zip file, no Joy. Now the phone is stuck at the point where it doesn't have an OS to boot into at all.
I'll really appreciate the community's support helping me fix this issue.
geek-x said:
I'm not new to flashing custom roms and rooting Android devices, so I don't think I'm a noob at this. I decided to help my friend unleash the power in his HTC One S by rooting it and giving it a custom recovery, I went through the right processes, Unlocked the phone's bootloader, and flashed the superuser zip and the twrp image, as it didn't seem like a clockworkmod image was compatible with the phone.
I then booted into recovery, wiped/factory reset and then flashed the latest CM11 nightly and got an error in TWRP recovery about the bootloader not been interoperable something like "
Code:
2.15==2.13"
in the error message , fine, I rebooted back into fastboot and checked the HBOOT Version and found out the phone was on HBOOT 1.13 and I think CM11 requires the most recent HBOOT version to work on HTC devices. The phone has got S-Off though.
Now I'm stuck in a bootloop cause I already wiped the OS in TWRP, I have everything in place, the right drivers and all that, I also tried re-installing the stock rom by downloading an HTC One S's RUU file but the device wasn't recognized at all by the RUU installer, I also tried to flash a stock 4.0.x rom as a zip file, no Joy. Now the phone is stuck at the point where it doesn't have an OS to boot into at all.
I'll really appreciate the community's support helping me fix this issue.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2322755
You need that. Luckily you're already S-Off, so shouldn't be terrible to get going again. Just update the firmware, reinstall TWRP and re-flash CM11. Should be good to go afterwards.
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=2322755
You need that. Luckily you're already S-Off, so shouldn't be terrible to get going again. Just update the firmware, reinstall TWRP and re-flash CM11. Should be good to go afterwards.
Click to expand...
Click to collapse
Thank you so much for the reply, does it matter that I don't have an OS to boot into as I already wiped and factory reset the phone for installation of a new rom.?
geek-x said:
Thank you so much for the reply, does it matter that I don't have an OS to boot into as I already wiped and factory reset the phone for installation of a new rom.?
Click to expand...
Click to collapse
Nah, shouldn't. The firmware we're referring to here is independent of the OS.
es0tericcha0s said:
Nah, shouldn't. The firmware we're referring to here is independent of the OS.
Click to expand...
Click to collapse
At the end of the guide, should help fix the issue, there's a part where I'm supposed to install the new CM kernel from the CM .zip package, how do I flash a kernel from Fastboot?
geek-x said:
At the end of the guide, should help fix the issue, there's a part where I'm supposed to install the new CM kernel from the CM .zip package, how do I flash a kernel from Fastboot?
Click to expand...
Click to collapse
Since you are S-Off, needing fastboot to install the boot.img is not necessary. It will install through recovery.
But, for future reference, you would boot to the bootloader screen, select fastboot, then assuming you have fastboot set up on the PC and the boot.img in the directory of said fastboot, you would use this command:
fastboot flash boot boot.img
then
fastboot reboot
es0tericcha0s said:
Since you are S-Off, needing fastboot to install the boot.img is not necessary. It will install through recovery.
But, for future reference, you would boot to the bootloader screen, select fastboot, then assuming you have fastboot set up on the PC and the boot.img in the directory of said fastboot, you would use this command:
fastboot flash boot boot.img
then
fastboot reboot
Click to expand...
Click to collapse
I tried flashing the firmware.zip file from the thread but I got a FAILED: (remote: not allowed) error in command prompt at the end of the process, what did I do wrong?
UPDATE: I was able to update the bootloader version successfully, as I forgot the part where I was to boot into RUU mode with fastboot oem rebootRUU and worked perfectly the second time.
I rebooted and found out the boot loader was updated to HBoot 2.15, and I also updated twrp to the latest S4 version but now in recovery I get errors about twrp been unable to mount the /data partition. Do I flash another recovery image?
UPDATE:
Thank you so much es0tericcha0s, I really appreciate the support, I got the /data mount issue fixed finally. I just had to flash an older twrp recovery image and then reflashed the new one in fastboot and I could then flash CM successfully.
I can't believe I finally unbricked this phone, its been bricked since Sunday. Once again, es0tericcha0s, Thank you!
geek-x said:
UPDATE: I was able to update the bootloader version successfully, as I forgot the part where I was to boot into RUU mode with fastboot oem rebootRUU and worked perfectly the second time.
I rebooted and found out the boot loader was updated to HBoot 2.15, and I also updated twrp to the latest S4 version but now in recovery I get errors about twrp been unable to mount the /data partition. Do I flash another recovery image?
Click to expand...
Click to collapse
You might need to RUU back then. If you have issues with the RUU exe, then you can extract the rom.zip and install it like you did the firmware. There are quite a few tutorials on how to extract it, or there might already be a version floating around for your phone.
I have the castor windy version 16gb SGP511. I was previously rooted but not unlocked. I unlocked the boot loader. Installed the twrp image on the pac man thread which i think was dual recovery cause Philz,Cwm came out, so I can install lollipop version of the rom. Made a backup of the stock rom. Followed this instructions - Install the Lollipop ROM + GApps+SuperSU using whatever Recovery you have.
- Turn off device completely.
- Press <Volume Up> and plug USB cable.
- LED should turn blue.
- Send command: "fastboot erase recovery"
- Send command for Castor_Windy: "fastboot flash recovery TWRP_Castor_Windy.img"
- Send command for Castor: "fastboot flash recovery TWRP_Castor.img"
- Unplug USB cable.
- Device will reboot.
- When LED turns pink press <Volume Up> and <Volume Down> several times.
- You should now see TWRP
I wasnt fast enough so stock rom booted. I used Adb reboot recovery to access recovery and did as the above mentioned. Wiped i tried to install the rom which failed. Rebooted back to system and got stuck in Sony boot up screen. I can access fastboot. Read though the forums I have to find a ftf or a system image file and use a flash tool. What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Kamaleon said:
What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Click to expand...
Click to collapse
Try this Xperia downloader tool. Should let you see which versions are which. If you want an easy root, then stay away from the KitKat builds, unless you want to unlock bootloader.
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
Use Flashtool to flash your downloaded ftf file. Just make sure your device is charged.
http://forum.xda-developers.com/showthread.php?t=2335555
I believe flashtool will even install the drivers for your 511
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Kamaleon said:
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Click to expand...
Click to collapse
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Moscow Desire said:
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Click to expand...
Click to collapse
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Kamaleon said:
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Click to expand...
Click to collapse
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Moscow Desire said:
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Click to expand...
Click to collapse
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Kamaleon said:
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Click to expand...
Click to collapse
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Moscow Desire said:
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Click to expand...
Click to collapse
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Kamaleon said:
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Click to expand...
Click to collapse
Well, I'm not sure which route to take.
However, I will tell you what I have learned the other day.
I have the 521 with unlocked bootloader. Rooted with my own boot.img, flashed SuperSU using "flashboot boot recovery.img" (yeah, sometimes it doesn't show on the display, so it takes a few times).
Now, other day I was going to check out the new LyPop pre-rooted. Fastboot flash recovery recovery,img, and it won't boot it to recovery like it should. Like it's not flashed. Tried it a couple times. Now, I didn't install the dual recovery as I'm not sure how that kernel (boot.img) will interact with my current tabs OS. Not to mention I need it for my work until tomorrow. But strangely it sounds like the same issue you have.
This weekend I will investigate it. As for me, I will probably flash the Stock ftf lyPop build, and just root it using a modified boot.img.
One thing I do know, is flashing a custom recovery to the "recovery" partition, doesn't seem to work like it used to work on other devices. It seems the flashing to the "Fota kernel" partition seems to be the only method that works. This is what happens when you flash that dual recovery, or any recovery that has a boot image using "Fota". Probably explains why you can't get rid of it using "fastboot erase recovery". because it's erasing the wrong partition. Only flashing a full ftf gets rid of it, because the ftf has a new FotaKernel it flashes.
Eh, something like that. Will look at it this weekend.