Hello,
I last few days I have noticed my screen is not calibrated well..... I press backspace, but it gets that I pressed letter "l" and it annoys me very much.
I cannot find screen calibration setting... Help please.
Thanks
p.s. there is no gyroscope option in my phone
SpineSurgery said:
Hello,
I last few days I have noticed my screen is not calibrated well..... I press backspace, but it gets that I pressed letter "l" and it annoys me very much.
I cannot find screen calibration setting... Help please.
Thanks
p.s. there is no gyroscope option in my phone
Click to expand...
Click to collapse
I had the same issue with my SII - I did a nand back up and then did a factory reset - had no issues after that - my SIII hasn't had any issues yet (touch wood)
Any solution to try without factory reset?
Why there is no calibration option :-S ?
Related
Hi,
When I eject the qwerty keyboard, screen goes white. Its maybe do the sensor, but when I press the power button twice (its mean take off take on display) the screen is ok and landscape. I do hard reset but it isnt help.
And my secon problem is a non-function buttons bottom display. The softkeys work only when I want do a hard reset.
Thanks for every solution.
m41t said:
Hi,
When I eject the qwerty keyboard, screen goes white. Its maybe do the sensor, but when I press the power button twice (its mean take off take on display) the screen is ok and landscape. I do hard reset but it isnt help.
And my secon problem is a non-function buttons bottom display. The softkeys work only when I want do a hard reset.
Thanks for every solution.
Click to expand...
Click to collapse
This is a Hermes problem, it has been discussed widely here on XDA, try searching.
Thanks for reply,
I try search but I can find the same problems like my.
m41t said:
Hi,
When I eject the qwerty keyboard, screen goes white. Its maybe do the sensor, but when I press the power button twice (its mean take off take on display) the screen is ok and landscape. I do hard reset but it isnt help.
And my secon problem is a non-function buttons bottom display. The softkeys work only when I want do a hard reset.
Thanks for every solution.
Click to expand...
Click to collapse
You can find the solution here : http://forum.xda-developers.com/showthread.php?t=321163
Thanks to Mike!
A connector is loose
Look also to this: http://forum.xda-developers.com/showthread.php?t=465549
Thanks a lot for reply,
the mike's thread maybe fix the buttons but I think it's not reason for white screen when I eject the qwerty keyboard. When anybody have the same problem please post. Thank's again
m41t said:
Thanks a lot for reply,
the mike's thread maybe fix the buttons but I think it's not reason for white screen when I eject the qwerty keyboard. When anybody have the same problem please post. Thank's again
Click to expand...
Click to collapse
I think that when you slide the keyboard, the connector wobbles thus a white screen.
Hi can anyone please help me my htc prophet touch screen is dead and it boots but am on WM 6.5 so the lock screen comes up is there anyway i can bypass it? If not any ideas that can help? thanks in advance oh the phone is on but no light on screen and touch will not work am stuck on the unlock screen lol
Oh never mind i used mymobiler to get in but the screen there is no light is there anyway to fix this? becouse i cant see anything on the screen plz help
lyndel4 said:
Oh never mind i used mymobiler to get in but the screen there is no light is there anyway to fix this? becouse i cant see anything on the screen plz help
Click to expand...
Click to collapse
If the backligt is not damaged you can go to start->settings->System->Backlight and change backlight level. You can view items from the display with an external light iluminating the screen. If is damaged try to dezassembly and check first display connectors... and if are ok you have to replace the display.
try to click on the middle of the screen for many several times and click on the whole screen till u get response and don't make the phone in hot weather or make it make friction with anything !!
bikertibi said:
If the backligt is not damaged you can go to start->settings->System->Backlight and change backlight level. You can view items from the display with an external light iluminating the screen. If is damaged try to dezassembly and check first display connectors... and if are ok you have to replace the display.
Click to expand...
Click to collapse
Thanks alot got thought and disabled the lock screen but it seems my touch screen is working but its all wrong the calibration/ screen alignment is incorrect is there anyway I copy a file from a working prophet and put it in my phone one that has good calibration/ screen alignment will it work?
MAZAR SCIENTIST said:
try to click on the middle of the screen for many several times and click on the whole screen till u get response and don't make the phone in hot weather or make it make friction with anything !!
Click to expand...
Click to collapse
The touch screen works when I touch some places on the screen but the touch input is incorrect when I touch the screen the woung application opens anyway to fix it o my screen will click on the right place?
lyndel4 said:
Thanks alot got thought and disabled the lock screen but it seems my touch screen is working but its all wrong the calibration/ screen alignment is incorrect is there anyway I copy a file from a working prophet and put it in my phone one that has good calibration/ screen alignment will it work?
The touch screen works when I touch some places on the screen but the touch input is incorrect when I touch the screen the woung application opens anyway to fix it o my screen will click on the right place?
Click to expand...
Click to collapse
If only the calibration is your problem, then try to restart calibration aplications from Settings->System->Screen->Align Screen using hardware keyboard. Calibration data are registry keys..
bikertibi said:
If only the calibration is your problem, then try to restart calibration aplications from Settings->System->Screen->Align Screen using hardware keyboard. Calibration data are registry keys..
Click to expand...
Click to collapse
Wait sorry I dont understand what you mean because if I try to use the Align Screen I will get no were it wont work but you said its the registry right so what do I have to put in the registry so that it would Align it self and will be user able plz tell me thanks
This morning I started having an issue with my edge.
Whenever I touch the screen, both capacitive buttons light up. Causing for irregular behaviour when using the phone. Is there a screen calibration mode or should I return it for a new phone.
Mine does the same thing. I'm pretty sure that's standard.
Agreed. Sounds like normal behavior to me.
I fail to see how this is an issue?
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
And for reasons unknown, every s6 excluding the att version has had the setting to turn off the lights removed.
paddylaz said:
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
Click to expand...
Click to collapse
That is not true.
The S5 cap lights also light up when you touch the screen. That is how it should work. It would ridiculous for it to NOT light up every time you interact with the phone (assuming you wanted them on at all).
It would be nice to have the option to turn them off. That doesn't make it an issue--more of a feature request.
paddylaz said:
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
And for reasons unknown, every s6 excluding the att version has had the setting to turn off the lights removed.
Click to expand...
Click to collapse
They really don't use any noticable battery.
cpshoemake said:
It would be nice to have the option to turn them off. That doesn't make it an issue--more of a feature request.
Click to expand...
Click to collapse
If you enable power saving mode it turns them off FWIW.
Fix for this issue
Hi,
please check my reply in the S6 thread on the same issue: http://forum.xda-developers.com/showpost.php?p=60009456&postcount=12
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Some times my capacitive buttons stop working altogether. It happened to me twice so far. It lasts about a minute. No response no light, nothing. Anyone else?
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
Where are you finding the "Touch Key Light" settings? I don't seem to see them.
---------- Post added at 08:28 AM ---------- Previous post was at 08:27 AM ----------
mrnovanova said:
Some times my capacitive buttons stop working altogether. It happened to me twice so far. It lasts about a minute. No response no light, nothing. Anyone else?
Click to expand...
Click to collapse
Yes, I am having the same issue. I thought it might be an app but I have removed all of them and it still happens. So annoying!! Even a reboot doesn't help.
Settings-Device-Display-Touch key light duration
Dr. Bamboozle said:
Settings-Device-Display-Touch key light duration
Click to expand...
Click to collapse
that option is NOT on the 925T
wase4711 said:
that option is NOT on the 925T
Click to expand...
Click to collapse
This is not on the SM-G925W8 version either.
Sometimes these buttons stop working all together and sometimes they both switch to become the task switcher button. The Back Key will no longer function to move you back a page! Very annoying. I am thinking the only fix might be a complete factory reset??
BTW, when this happens, something is loading in the background. Just before my buttons stop working, a get a very small vibration similar to when your device boots up. From that point forward the buttons don't work. It can last 1/2 hour or up to 2-3 hours before it clears itself up??
Update: I did a factory reset and it didn't do any good. There are literally thousands of posts on the web about this issue and no resolution. If you have this issue, I think you need to send your unit back.
I have a SAMSUNG-SM-G925A running stock AT&T Android 5.02
I dunno, received my Edge today and my capacitive buttons only light up when I click them.
I took my phone back today and Rogers very quickly gave me a replacement phone. Capacitive buttons working well on this one!!
Everything was working as expected and the two buttons (Back and running apps) stopped working, i made a factory rest and it did not help, I am suspecting the cover that have magnets in it and I removed it, shut down the phone for few minutes but it did not help, I will try extending the time it is shut down and see the results.
For those with button light issues try this app "Galaxy Button Lights". I'm not allowed to post external links here but you can find it in Google Play.
The proximity sensor doesnt work after a call, I have to press the power buton to turn it on again, recalibrating it fixed it before, not anymore...
Same with standard phone app and other phone apps
melorib said:
The proximity sensor doesnt work after a call, I have to press the power buton to turn it on again, recalibrating it fixed it before, not anymore...
Same with standard phone app and other phone apps
Click to expand...
Click to collapse
Same here.Start last week .Any body have a suggestion to solve this problem?
Thank you
Zenia said:
Same here.Start last week .Any body have a suggestion to solve this problem?
Thank you
Click to expand...
Click to collapse
It doesnt happen every time, sometimes wiping the sensor works...
melorib said:
It doesnt happen every time, sometimes wiping the sensor works...
Click to expand...
Click to collapse
Well, not in my case,but thank you for quick reply
melorib said:
The proximity sensor doesnt work after a call, I have to press the power buton to turn it on again, recalibrating it fixed it before, not anymore...
Same with standard phone app and other phone apps
Click to expand...
Click to collapse
Exact the same problem I have. I reflashed the rooted *.tot file on my H961N (Lollipop, V10c). It's OK for 6-8 calls and after, the screen is not responding, Proximity sensor: no reaction. Knock on screen: no reaction. I must press the power button to wake up the screen. I tried to rewrite with RootExplorer the foder LGInCallUi and LGContacts from an earlier version (V10a-HKG-xx). Nothing. I wiped the cache. Nothing. I don't know what to do Need help. Thanks.
Cleaning the sensor makes it work a few times, then clean again, after we know the problem it is not too bad
Some of LG V10 has that problem but most of Korea's version (F600/s/l/k) . I'm using H960(viet nam),it's working okay and F600k is working not good (proximity sensor ), it's also mine . I think that's hardware.
I have this weird issue that my phone's display goes yellow and flickers a lot when I open it using power button or hard press home button but if always on display is set to ON the display turns on normally without any issue howsoever I open it either by the home button or any other way
and even after the call as the proximity sensor turns the display black the problem starts again as soon as the call ends, so please someone could help me is it a software issue or hardware? I'm on latest stable android one.
I have the same issue, technicians have advice me to change the screen
Varun Vijaywargi said:
I have this weird issue that my phone's display goes yellow and flickers a lot when I open it using power button or hard press home button but if always on display is set to ON the display turns on normally without any issue howsoever I open it either by the home button or any other way
and even after the call as the proximity sensor turns the display black the problem starts again as soon as the call ends, so please someone could help me is it a software issue or hardware? I'm on latest stable android one.
Click to expand...
Click to collapse
Did you figure out a solution for the problem??
I seem to have the same issue now.
real_dzeko said:
Did you figure out a solution for the problem??
I seem to have the same issue now.
Click to expand...
Click to collapse
I have to change the screen.
badaru1 said:
I have the same issue, technicians have advice me to change the screen
Click to expand...
Click to collapse
Did he mention the cause for it?
real_dzeko said:
Did you figure out a solution for the problem??
I seem to have the same issue now.
Click to expand...
Click to collapse
Yes a temporary solution is to turn on AOD and then single tap the screen, after that press the power button to avoid the yellow flicker or complete black screen.