I have just updated to dcd 3.1.2 with radio 3.39.10 and ever since, the windows logo button will no longer initiate the "start" dropdown menu. Any Help? Would be much appreciated!
i dont have my phone to look if its even possible but did you check the binding of that button in the buttons setting?
Do you have a clean rom or did you add any cabs or oems added ? I would try reflashing again and see if it still is not working.
Try re-calibrating your screen ( Screen Alignment )
[email protected]$ said:
Try re-calibrating your screen ( Screen Alignment )
Click to expand...
Click to collapse
Is it only when you use the touchscreen or also when you use the hard button?
prepsssuck said:
Is it only when you use the touchscreen or also when you use the hard button?
Click to expand...
Click to collapse
Touch Screen.
It was both touch screen and button function. But i got it fixed by just soft resetting 2 or three times. Thanks for all your help!!
since the capacitve buttons seem unresponsive don't you think sony should add the option for on screen buttons when they update to ics. someone should contact sony about this
AwesomeAHlee said:
since the capacitve buttons seem unresponsive don't you think sony should add the option for on screen buttons when they update to ics. someone should contact sony about this
Click to expand...
Click to collapse
Could be a possibility. I find that with the menu and back buttons if I press to the inside of the buttons they work better.
Xperia S white
Funny. I do not have the problem with the sensitivity.....
Sent from my LT26i using XDA
They respond just fine actually, they just are a bit small so if you do the whole "hunt and peck" method for it, you will probably miss and mistake it for being unresponsive
Try sliding up from the transparent bar, or if you insist on the other way, aim above the silver dots Try sliding, you will not have any of what is called incorrectly unresponsive buttons
and ICS probably won't come with the screen buttons because it's a big waste of space, and with perfectly fine working buttons, its redundant.
shmoejoe said:
They respond just fine actually, they just are a bit small so if you do the whole "hunt and peck" method for it, you will probably miss and mistake it for being unresponsive
Try sliding up from the transparent bar, or if you insist on the other way, aim above the silver dots Try sliding, you will not have any of what is called incorrectly unresponsive buttons
and ICS probably won't come with the screen buttons because it's a big waste of space, and with perfectly fine working buttons, its redundant.
Click to expand...
Click to collapse
I've just tried the slide from bottom and its surprisingly good. You learn something new everyday.
Xperia S white
Since I bought my Atrix, the lights of the buttons are like on the image below: back and search are fully dark. On full brightness, is OK (but menu and home is always a little brighter)
Is it normal? Until today I did not mind because the button work OK and I don't want to send to assistance only for that.
Does anyone know what can be? At my research, I found that the backlight of buttons is the same as the screen , right?
hunff said:
At my research, I found that the backlight of buttons is the same as the screen , right?
Click to expand...
Click to collapse
Nope, not at all. Those are two backlights controlled separately.
No idea what's going on with yours. As far as I know, soft buttons are backlit with a few white LED-s, I guess some of yours are just giving out.
Mines the same on CM10.
Sent from my Nexus 7 on official CM10
Hello,
I last few days I have noticed my screen is not calibrated well..... I press backspace, but it gets that I pressed letter "l" and it annoys me very much.
I cannot find screen calibration setting... Help please.
Thanks
p.s. there is no gyroscope option in my phone
SpineSurgery said:
Hello,
I last few days I have noticed my screen is not calibrated well..... I press backspace, but it gets that I pressed letter "l" and it annoys me very much.
I cannot find screen calibration setting... Help please.
Thanks
p.s. there is no gyroscope option in my phone
Click to expand...
Click to collapse
I had the same issue with my SII - I did a nand back up and then did a factory reset - had no issues after that - my SIII hasn't had any issues yet (touch wood)
Any solution to try without factory reset?
Why there is no calibration option :-S ?
Upgraded to CM11, but had this on 10.2 as well. Back and home buttons are rendered inoperable depending on how NT is positioned (rotated). Really annoying and I know they aren't shorted because BACK works in one position but not the other, same issue with HOME. Anyone know of a fix?
Anybody?
you're talking about the onscreen buttons in android, right? i've never had any issues
that happen to me
I had that same problem when I change the dpi from 160 to 265 and that when it happen to me. It took me a day or two before I realized what causes It but when I change the dpi back to 160 my buttons started to work just as they did before.I hope this helps you with your fix.good luck
Well I don't know if it's your case, but this happened to me as well, and I found that I had dead zones in touchscreen exactly where on screen home and back buttons are, the only way I could use home and back buttons again was rotating the screen to upside down portrait (I could not pull down controls menu in this position since that part of screen was dead) or in landscape.
How I found out: download this app. from Google Play https://play.google.com/store/apps/details?id=com.rn.yamtt, turn your tablet to landscape so on screen buttons will change positions. Open the app. and select paint tester and move your finger on the part of the screen where the on screen buttons wasn't working in portrait mode.
If you have dead zones like me, the app. won't paint the area where you are moving your finger because the touchscreen is dead in that area.
Also, my nook developed another problem after this, it won't charge, and when I plug the power cord, tablet crashes and reboots and stay in a bootloop unless I remove the cable. I'm 100% sure the cable and charger are ok, my nook suddenly started to show a lot of problems, I'll miss my nook =/
so what did you do to fix it?
F. Gacrux said:
Well I don't know if it's your case, but this happened to me as well, and I found that I had dead zones in touchscreen exactly where on screen home and back buttons are, the only way I could use home and back buttons again was rotating the screen to upside down portrait (I could not pull down controls menu in this position since that part of screen was dead) or in landscape.
How I found out: download this app. from Google Play https://play.google.com/store/apps/details?id=com.rn.yamtt, turn your tablet to landscape so on screen buttons will change positions. Open the app. and select paint tester and move your finger on the part of the screen where the on screen buttons wasn't working in portrait mode.
If you have dead zones like me, the app. won't paint the area where you are moving your finger because the touchscreen is dead in that area.
Also, my nook developed another problem after this, it won't charge, and when I plug the power cord, tablet crashes and reboots and stay in a bootloop unless I remove the cable. I'm 100% sure the cable and charger are ok, my nook suddenly started to show a lot of problems, I'll miss my nook =/
Click to expand...
Click to collapse
wedmiston said:
so what did you do to fix it?
Click to expand...
Click to collapse
Nothing since this has no fixes, part of the touchscreen is simply dead, unless a miracle happens, I even tried to restore stock nook rom, opened my tablet to check if there is a loose cable or something.
Is this happened to you in the same day you opened this thread? If your answer is yes, this sounds funny, because it's exactly the day when this small part on left bottom of the touchscreen died in my nook.
Also, somewhat my tablet started to charge again, but very slow, like USB charging, but I'm happy my nook returned to life.
No this happened many weeks before the thread. All of a sudden both home and back touches no longer worked in portrait position, but DO work in Landscape. Annoying.
F. Gacrux said:
Nothing since this has no fixes, part of the touchscreen is simply dead, unless a miracle happens, I even tried to restore stock nook rom, opened my tablet to check if there is a loose cable or something.
Is this happened to you in the same day you opened this thread? If your answer is yes, this sounds funny, because it's exactly the day when this small part on left bottom of the touchscreen died in my nook.
Also, somewhat my tablet started to charge again, but very slow, like USB charging, but I'm happy my nook returned to life.
Click to expand...
Click to collapse
wedmiston said:
No this happened many weeks before the thread. All of a sudden both home and back touches no longer worked in portrait position, but DO work in Landscape. Annoying.
Click to expand...
Click to collapse
Did you made the check I mentioned before? Does the back and home buttons works if put your tablet in upside down position so portrait mode will move soft buttons to the top edge?
Yes - all three DO work when I flip it upside down in portrait. Is this my workaround?
F. Gacrux said:
Did you made the check I mentioned before? Does the back and home buttons works if put your tablet in upside down position so portrait mode will move soft buttons to the top edge?
Click to expand...
Click to collapse
wedmiston said:
Yes - all three DO work when I flip it upside down in portrait. Is this my workaround?
Click to expand...
Click to collapse
Unfortunately, you have the same problem as me - dead zone in touchscreen. Flip the tablet upside down in portrait or use in landscape are the only workaround afaik. I thought in moving the on screen buttons more to the right in a zone where the touchscreen is working, but I didn't find a way to do this, I managed to move them a little bit by adding more buttons in the bar in system settings, but the back button would still stay in the dead zone, them I switched home and back buttons positions (so home stays in the dead zone) since you can still use the tablet N button to use home function.