Related
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
alikhan321 said:
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
Click to expand...
Click to collapse
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
the-equinoxe said:
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
Click to expand...
Click to collapse
LOL nice one Eqx
duh
i done that it dont work man i need exprt advice help
alikhan321 said:
i done that it dont work man i need exprt advice help
Click to expand...
Click to collapse
Soft SPL is put to MEMORY, it's not FLASHED.
Rebooting the device will clear the memory.
Thus removing the sSPL.
Try pulling your battery for a few minutes.
Then put it back again and boot the device.
HELP
I Took Out The Battery For 1hr Still The White Screen,help
Took Out Sd Card Took Out Sim ???????????
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
dferreira said:
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
Click to expand...
Click to collapse
That is the exact same advice I PM-ed him.
yes done all that nothing yet just some white screen always on can hear background noices of the phone ,the leds working like normal
please help i love my wizard its been 3 days now my coldrx turkey is very hard now
That's odd... if he can hear the phone start menu going on... maybe you can do it again (use sSPL to flash another ROM). Maybe that will work?
Could it have something to do with DROPPING HIS PHONE instead of the sSPL?
Because the sSPL isn't flashed as I said many times before, it is in MEMORY, not flash..
new screen
i put the new screen in same white screen tested the screen in mda(pic inclosed) so nothing to do with screen
any more ideas
the screen is fine howcan i switch white screen off
to any one who can help
the more you know.....http://www.mdatweak.com/downloads/Wizard_Service_Manual.pdf
make hard reset and then
contecet with ubs and use the SPL again.
its happend to me and i did what i wrote and its worked....
I'm in the same boat! My Wizard is in the stuck white screem as well.
Zpyro said:
I'm in the same boat! My Wizard is in the stuck white screem as well.
Click to expand...
Click to collapse
could you give us more details?
-device (G3/G4)
-what you did (exactly) before you got this white screen.
It is a 8125 (G4) that is unlocked.
I created a ROM from one of the kitchens, and flashed it ... White Screen.
WOO HOO!!! GOT IT!!!
Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.
Enjoy!
Hi,
When I eject the qwerty keyboard, screen goes white. Its maybe do the sensor, but when I press the power button twice (its mean take off take on display) the screen is ok and landscape. I do hard reset but it isnt help.
And my secon problem is a non-function buttons bottom display. The softkeys work only when I want do a hard reset.
Thanks for every solution.
m41t said:
Hi,
When I eject the qwerty keyboard, screen goes white. Its maybe do the sensor, but when I press the power button twice (its mean take off take on display) the screen is ok and landscape. I do hard reset but it isnt help.
And my secon problem is a non-function buttons bottom display. The softkeys work only when I want do a hard reset.
Thanks for every solution.
Click to expand...
Click to collapse
This is a Hermes problem, it has been discussed widely here on XDA, try searching.
Thanks for reply,
I try search but I can find the same problems like my.
m41t said:
Hi,
When I eject the qwerty keyboard, screen goes white. Its maybe do the sensor, but when I press the power button twice (its mean take off take on display) the screen is ok and landscape. I do hard reset but it isnt help.
And my secon problem is a non-function buttons bottom display. The softkeys work only when I want do a hard reset.
Thanks for every solution.
Click to expand...
Click to collapse
You can find the solution here : http://forum.xda-developers.com/showthread.php?t=321163
Thanks to Mike!
A connector is loose
Look also to this: http://forum.xda-developers.com/showthread.php?t=465549
Thanks a lot for reply,
the mike's thread maybe fix the buttons but I think it's not reason for white screen when I eject the qwerty keyboard. When anybody have the same problem please post. Thank's again
m41t said:
Thanks a lot for reply,
the mike's thread maybe fix the buttons but I think it's not reason for white screen when I eject the qwerty keyboard. When anybody have the same problem please post. Thank's again
Click to expand...
Click to collapse
I think that when you slide the keyboard, the connector wobbles thus a white screen.
Hi can anyone please help me my htc prophet touch screen is dead and it boots but am on WM 6.5 so the lock screen comes up is there anyway i can bypass it? If not any ideas that can help? thanks in advance oh the phone is on but no light on screen and touch will not work am stuck on the unlock screen lol
Oh never mind i used mymobiler to get in but the screen there is no light is there anyway to fix this? becouse i cant see anything on the screen plz help
lyndel4 said:
Oh never mind i used mymobiler to get in but the screen there is no light is there anyway to fix this? becouse i cant see anything on the screen plz help
Click to expand...
Click to collapse
If the backligt is not damaged you can go to start->settings->System->Backlight and change backlight level. You can view items from the display with an external light iluminating the screen. If is damaged try to dezassembly and check first display connectors... and if are ok you have to replace the display.
try to click on the middle of the screen for many several times and click on the whole screen till u get response and don't make the phone in hot weather or make it make friction with anything !!
bikertibi said:
If the backligt is not damaged you can go to start->settings->System->Backlight and change backlight level. You can view items from the display with an external light iluminating the screen. If is damaged try to dezassembly and check first display connectors... and if are ok you have to replace the display.
Click to expand...
Click to collapse
Thanks alot got thought and disabled the lock screen but it seems my touch screen is working but its all wrong the calibration/ screen alignment is incorrect is there anyway I copy a file from a working prophet and put it in my phone one that has good calibration/ screen alignment will it work?
MAZAR SCIENTIST said:
try to click on the middle of the screen for many several times and click on the whole screen till u get response and don't make the phone in hot weather or make it make friction with anything !!
Click to expand...
Click to collapse
The touch screen works when I touch some places on the screen but the touch input is incorrect when I touch the screen the woung application opens anyway to fix it o my screen will click on the right place?
lyndel4 said:
Thanks alot got thought and disabled the lock screen but it seems my touch screen is working but its all wrong the calibration/ screen alignment is incorrect is there anyway I copy a file from a working prophet and put it in my phone one that has good calibration/ screen alignment will it work?
The touch screen works when I touch some places on the screen but the touch input is incorrect when I touch the screen the woung application opens anyway to fix it o my screen will click on the right place?
Click to expand...
Click to collapse
If only the calibration is your problem, then try to restart calibration aplications from Settings->System->Screen->Align Screen using hardware keyboard. Calibration data are registry keys..
bikertibi said:
If only the calibration is your problem, then try to restart calibration aplications from Settings->System->Screen->Align Screen using hardware keyboard. Calibration data are registry keys..
Click to expand...
Click to collapse
Wait sorry I dont understand what you mean because if I try to use the Align Screen I will get no were it wont work but you said its the registry right so what do I have to put in the registry so that it would Align it self and will be user able plz tell me thanks
Hi!
I installed "U20_nAa-14_2.6.29.6-nAa-14" and "MiniCM7-2.2.1-mimmi" on my phone. The mobile network didn't worked, so I tried closing back the bootloader. I made it with "s1tool relock.exe", and it really closed it back. The instructions I followed while doing it, said that I shouldn't start the phone after doing the relocking and disconnecting it from the computer. Accidentally I switched it on, and now it won't turn on. Only the startup vibration and green led flash. If I connect it to the computer it keeps connecting and deconnecting, I don't know how to open up the bootloader again if it's possible at all.
Is it repairable?
Thank you for your help.
Rodage said:
Hi!
I installed "U20_nAa-14_2.6.29.6-nAa-14" and "MiniCM7-2.2.1-mimmi" on my phone. The mobile network didn't worked, so I tried closing back the bootloader. I made it with "s1tool relock.exe", and it really closed it back. The instructions I followed while doing it, said that I shouldn't start the phone after doing the relocking and disconnecting it from the computer. Accidentally I switched it on, and now it won't turn on. Only the startup vibration and green led flash. If I connect it to the computer it keeps connecting and deconnecting, I don't know how to open up the bootloader again if it's possible at all.
Is it repairable?
Thank you for your help.
Click to expand...
Click to collapse
Flash THIS with flashtool. The download is about 213 MB, although it may say differently when downloading, just wait till it's finished.
It's original Sony Ericsson Firmware and can be flashed on a device with a locked bootloader. Not sure about the version, although it says 2.1.1.A.0.6, it may be older, but i don't have a U20, so I can't check. It should be possible to upgrade it with Sony Update Service if it's an older version. Good luck.
Thank you!
It worked. Can I ask that too, is there a safest way to solve the no network problem?
Rodage said:
Thank you!
It worked. Can I ask that too, is there a safest way to solve the no network problem?
Click to expand...
Click to collapse
Depends on your simlock certificate or how your phone was unlocked from it's original network. There are two or three methods (msm_7227_semc, msm_7227_setool2, and maybe one for omnius too) , just try them and check if you get a signal before you flash any custom firmware. If you don't get a signal, relock it again and try a different method.
Flashtool used to be quite good at figuring out which method worked best, but I don't know if that still supports unlocking 2010 devices. I've got 0.9.13 and there is a BLU (Bootloader UnLock) button.. just try that
I opened it again with msm7227_semc, bacuse the others didn't worked, and installed it again. Now everything is fine, but the home button and the screen lock still not works:/ I think I'll leave it this way, and not risk one more time my network connection.
Thanks for your help.
Rodage said:
I opened it again with msm7227_semc, bacuse the others didn't worked, and installed it again. Now everything is fine, but the home button and the screen lock still not works:/ I think I'll leave it this way, and not risk one more time my network connection.
Thanks for your help.
Click to expand...
Click to collapse
If it's unlocked and the network is still there you can do whatever you want with it There's no need to lock it ever again so you can experiment with kernels and roms all you want.
What was the matter with the home-button and the screenlock? Do the other buttons work and is the screen ok when you slide out the keyboard?
SmG67 said:
If it's unlocked and the network is still there you can do whatever you want with it There's no need to lock it ever again so you can experiment with kernels and roms all you want.
What was the matter with the home-button and the screenlock? Do the other buttons work and is the screen ok when you slide out the keyboard?
Click to expand...
Click to collapse
The other buttons are all fine, and the home looks fine too, just the only way to use it is to turn on the screen with it. Which hasn't got a lock on it, when I push any button, it switches right to the home screen. Turning on lock patterns and others didn't helped. Maybe can I use external applications to substitute the functions?
Rodage said:
The other buttons are all fine, and the home looks fine too, just the only way to use it is to turn on the screen with it. Which hasn't got a lock on it, when I push any button, it switches right to the home screen. Turning on lock patterns and others didn't helped. Maybe can I use external applications to substitute the functions?
Click to expand...
Click to collapse
Hmm, sounds a bit like the ROM doesn't want to go to sleep. Maybe you could reboot into recovery, and wipe data/factory reset, wipe cache and wipe dalvik-cache (from the advanced menu). I'm sure you already did that, but it can't hurt to do it again, and see if that fixes the problem
The phone should enter deep-sleep after about 5 seconds after the screen is turned off, in which case the only way to wake up the screen are the power-button and the home-button. pressing menu or back should keep the phone asleep. If after about 10 or 20 seconds you can still wake up the screen with the back or menu buttons you might want to check if there's an app keeping the phone awake.
Done factory reset and cache wipe already multiple times. Just realized how annoying is the dysfunctional home button, so I tried MiniCM7-2.2.0, MiniCM9-3.0.5 with nAa-11,13,14 and nAa-ics-04. Unfortunatley didn't worked the home button or the screen lock with none of them. At first time, I installed the MiniCM10, but the phone was relatively slow with it and buzzed, so I switched to MiniCM7.
Screen timeout and turnoff delay both set to immediately, but even the camera button can turn on the screen no matter how many time elapses. Can the original MiniCM apps keep it awake? I installed a task killer, but no change.
Rodage said:
Done factory reset and cache wipe already multiple times. Just realized how annoying is the dysfunctional home button, so I tried MiniCM7-2.2.0, MiniCM9-3.0.5 with nAa-11,13,14 and nAa-ics-04. Unfortunatley didn't worked the home button or the screen lock with none of them. At first time, I installed the MiniCM10, but the phone was relatively slow with it and buzzed, so I switched to MiniCM7.
Screen timeout and turnoff delay both set to immediately, but even the camera button can turn on the screen no matter how many time elapses. Can the original MiniCM apps keep it awake? I installed a task killer, but no change.
Click to expand...
Click to collapse
If it happens on all ROMS, maybe it's your home-button keeping the phone alive, as in that it makes continuous contact. Wouldn't know what to do about that though. Does it happen on stock firmware too?
SmG67 said:
If it happens on all ROMS, maybe it's your home-button keeping the phone alive, as in that it makes continuous contact. Wouldn't know what to do about that though. Does it happen on stock firmware too?
Click to expand...
Click to collapse
No, when I restored it with the Sony Update Service everything worked fine on the stock 2.1, and it is still possible to turn on the screen with the home button, but it's other functions are out.
Wow, this time I didn't installed the gapps like it was written in the CM wiki (http://wiki.cyanogenmod.org/w/Install_CM_for_mimmi), both the home button and screen lock works. Why it is written in the "Install CM for mimmi" article if the gapps on the download page is for MiniCM10?
Whatever, shame on me, I should've just take it seriously, and not follow the instructions blindly.:silly:
Thanks for all of your help.:good:
Rodage said:
Wow, this time I didn't installed the gapps like it was written in the CM wiki (http://wiki.cyanogenmod.org/w/Install_CM_for_mimmi), both the home button and screen lock works. Why it is written in the "Install CM for mimmi" article if the gapps on the download page is for MiniCM10?
Whatever, shame on me, I should've just take it seriously, and not follow the instructions blindly.:silly:
Thanks for all of your help.:good:
Click to expand...
Click to collapse
If you get the ROM from the thread in x10minipro development section of this forum, there is a link to the proper gb-gapps
Hello,
I have a very strange problem with my Xperia Z2. After unlocking the display on the device is blank. You can see the brightness, the touch works, because when I swipe my fingers I can hear android sound but there is no picture. I must do "lock - unlock" pattern 3-4 times, sometimes even more to get the display work properly. I tried to fix it by using software repair but it didnt work, and also
factory reset. Its just so iritating, I cant even lock my phone anymore, I try to keep the display on as much as possible if someone trys to call me so I can answer it. Device is currently running on Existenz ROM but the issue started on the stock so I flashed custom rom but it didn't help. So this is probably a hardware problem and if it is, what could be broken ( is it display, GPU,whatever ) or it could be a software problem ? Any help would be appreciated.
Can you see your lockscreen?
iXaidyiu said:
Can you see your lockscreen?
Click to expand...
Click to collapse
No, no the "lock-unlock pattern" is reffered to simply pressing the unlock button on the phone. There is just blank display and light is on as I mentioned but no picture. After pressing button many times the picture finaly comes and then it's normal. It only happens when phone goes to sleep mode or after I lock it.
If your phone reboots can you see the SONY logo and the boot animation as well?
iXaidyiu said:
If your phone reboots can you see the SONY logo and the boot animation as well?
Click to expand...
Click to collapse
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
mby RIP graph.. try flashtools..
YamyYugi said:
mby RIP graph.. try flashtools..
Click to expand...
Click to collapse
It's probably hardware, now it's just a question of repair cost and is it worth it ?
TechCODE said:
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
Click to expand...
Click to collapse
I think this is due to a faulty LCD screen, but the digitalizer seems fine. So maybe you could consult some local repair shops and prove if my hypothesis is correct. But first of all you should try also flashing another kernel (eg elite kernel) first to see if it is a software issue rather than a hardware issue.
Sent from my Sony D6503 using XDA Labs