I juss got my Verizon Note 2, and was about to move some music and videos on it from my PC, but I ran into a strange issue. At first, when I plugged in my phone to my computer (Windows 8), Windows recognized the device, but no matter what mode I put it in, it never showed up in Windows Explorer. So, I tried downloading the Galaxy Note 2 Toolkit from XDA, but was unable to install it because it has yet to add support for the Verizon Note 2. So, I tried installing Kies, which installed my phone's driver, but won't actually recognize the device. When I look in Windows' device manager, I found the device was found under the name "SAMSUNG_Android", and had a yellow caution symbol next to it, and had the following text in the device status box:
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Click to expand...
Click to collapse
Any ideas on what to do?
P.S. I do have a 32GB microSD in the phone, in addition to the internal 16GB, but I have tried accessing the phone with and without the card installed.
lisalover1 said:
I juss got my Verizon Note 2, and was about to move some music and videos on it from my PC, but I ran into a strange issue. At first, when I plugged in my phone to my computer (Windows 8), Windows recognized the device, but no matter what mode I put it in, it never showed up in Windows Explorer. So, I tried downloading the Galaxy Note 2 Toolkit from XDA, but was unable to install it because it has yet to add support for the Verizon Note 2. So, I tried installing Kies, which installed my phone's driver, but won't actually recognize the device. When I look in Windows' device manager, I found the device was found under the name "SAMSUNG_Android", and had a yellow caution symbol next to it, and had the following text in the device status box:
Any ideas on what to do?
P.S. I do have a 32GB microSD in the phone, in addition to the internal 16GB, but I have tried accessing the phone with and without the card installed.
Click to expand...
Click to collapse
Try going into settings, about phone, tap build number 7 times, you are now a developer, back out to the main settings, go into developer options, enable usb debugging. Did that work?
drumdestroyer said:
Try going into settings, about phone, tap build number 7 times, you are now a developer, back out to the main settings, go into developer options, enable usb debugging. Did that work?
Click to expand...
Click to collapse
It was already enabled for some reason. Huh. Well, it's still not working.
I couldn't access my phone on my computer either it ended up being that I had to use the stock cable that came with the phone instead of the ones I bought off ebay
Sent from my SCH-I605 using Tapatalk 2
I'm having the same problem and neither the stock cable nor the cables from my GNex work. I have downloaded the Kies, deleted, re installed it numerous times with no luck. Also an aside, do the phones all come with a white cable and plug even when the phone is Gray?
Nevermind.
Make sure when you guys plug it into your pc that when you slide the notification bar down and it says conncected as installer you have to click that and check the box beside MTP. That solved my issue.
Sent From VZW Galaxy Note 2
Has anyone successfully gotten Kies to work? I'm on a MacBook Pro with no luck so far. Switched over to Windows and still no dice. So has Verizon just completely blocked us from using Kies???
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
SwiftLegend said:
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
Click to expand...
Click to collapse
What's the Toolkit Option?
i had the same problem and had to use the stock cable for it,other usb cables would only charge from the computer
fluidj said:
What's the Toolkit Option?
Click to expand...
Click to collapse
"Install Samsung Drivers" it's #1 I think.
s10sdeville said:
i had the same problem and had to use the stock cable for it,other usb cables would only charge from the computer
Click to expand...
Click to collapse
The stock cable is the only one I have and use.
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
SwiftLegend said:
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
Click to expand...
Click to collapse
Are you on a Mac or a PC?
PC
solution
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Thank You!!! Thank You!!!!
[/COLOR]
yokme said:
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Click to expand...
Click to collapse
Thank You Yokme!!! This worked for me. I have looked all over the web and this advice was the only thing that worked for me. God Bless You!!! :laugh:
yokme said:
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Click to expand...
Click to collapse
BRILLIANT! Just wasted an hour trying other options, this should be a sticky!
Rockin_Zombie said:
BRILLIANT! Just wasted an hour trying other options, this should be a sticky!
Click to expand...
Click to collapse
The code *#7248# isn't working for me. I type it into the dailer but nothing happens. Help?
manoosie said:
The code *#7248# isn't working for me. I type it into the dailer but nothing happens. Help?
Click to expand...
Click to collapse
Its 7284
Rockin_Zombie said:
Its 7284
Click to expand...
Click to collapse
Whoops sorry. I typed it wrong. Unfortunately, the right number still isn't working.
Related
Morning all.
As of yesterday, my S2 won't connect to any pc in mass storage mode.
At first it connected as it should, but after about 5 minutes - before I'd transferred anything - I got a message that windows couldn't recognise the device/driver installation unsuccessful.
Since then I get this message immediately, have tried 4 different pcs.
Would seem the USB drivers are FUBAR somehow, but MTP via Kies works, as does Odin.
I've tried a full factory reset/reinstall, previous backups - stock and custom - removed, reinstalled and updated Kies, cleaned the USB port on the phone - nothing doing. Have tried stock kernels, Siyah, Nimphetamine - nothing. Currently on XWKL1, custom ROM (krinyo's SlimROM) with Siyah 2.6.3+
Also tried uninstalling various USB ports on my home pc, but stopped when I discovered it was the same on all pcs.
It's not the end of the world - I have bluetooth and my microSD - but it's a PITA and I'm out of ideas.
Many thanks for any help/suggestions.
Have you cheched if USB Debugging is enabled or not?
AzureusPT said:
Have you cheched if USB Debugging is enabled or not?
Click to expand...
Click to collapse
Yes, forgot to add that, sorry. Tried with and without, no difference.
Tried changing the usb cable?
From another post
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Click to expand...
Click to collapse
Maybe this can help
Getting a Service Mode FC when I enter that code in the keypad.
Will try it with an older backup.
Edit - tried it with a backup of CheckROM , 2.3.6. No FC, PDA already selected. Tried 5c above, still no good - unknown device on pc..
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
No. Can't see that there's a problem there if Kies and Odin connect OK.
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
B3311 said:
No. Can't see that there's a problem there if Kies and Odin connect OK.
Click to expand...
Click to collapse
Bugger me, it was the cable....
Bought a new S2 yesterday - nice to have a backup, and the Nexus is meh - and tried the new cable on old S2, everything fine. Old cable on new S2, no good for USB but fine for Kies and Odin as mentioned before.
No idea why it should be like this, but sh*t happens. Easiest solution is often the best!
same problem happened to me too
I have the exact same problem, tried everything like OP, even new cable still same issue...any ideas?
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Tried this..and it works! thanks alot man.
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Thanks buddy, that was very helpful
anybody having trouble getting kies to detect the note 2 ? Mine seems not to recognize it ?
KgTheraad1 said:
anybody having trouble getting kies to detect the note 2 ? Mine seems not to recognize it ?
Click to expand...
Click to collapse
Same problem. Ive done everything (reinstall, USB debugging on/off, used the Unarchiver trick, etc) and it still doesnt recognize. There's also a problem with my network, it allows me to send texts but when people respond theyre sent to my Iphone 4s that I switched from. When I connect my Note it first says as installer and then goes to media device. And when it is installer a disc pops on on my desktop call My Verizon? I have a mac, 10.8 btw.
I also apologize if I am highjacking but I did not want to make another thread with essentially the same problems.
Sirrometan said:
Same problem. Ive done everything (reinstall, USB debugging on/off, used the Unarchiver trick, etc) and it still doesnt recognize. There's also a problem with my network, it allows me to send texts but when people respond theyre sent to my Iphone 4s that I switched from. When I connect my Note it first says as installer and then goes to media device. And when it is installer a disc pops on on my desktop call My Verizon? I have a mac, 10.8 btw.
I also apologize if I am highjacking but I did not want to make another thread with essentially the same problems.
Click to expand...
Click to collapse
Yea same thing is happening to me. I have a mac and Win7 and both are not detecting it. This is getting so frustrating.
Cant get it connected to my computer either so stupid
Extremely. And now my swiftkey swype on samsung keyboard is not working.
Ok uninstall all samsung stuff you have. go to "device installation settings" in windows 7 and hit never install new drivers. Download the older 1.5.6 samsung drivers and it should work. I atleast got it to show up on my computer
adampa1006 said:
Ok uninstall all samsung stuff you have. go to "device installation settings" in windows 7 and hit never install new drivers. Download the older 1.5.6 samsung drivers and it should work. I atleast got it to show up on my computer
Click to expand...
Click to collapse
Has anyone found any resolve to this yet?
Install Kies 3. After a while it will let you know that the connection failed. Leave the device connected and go to the menu bar and select tools, reinstall device drivers. It will reinstall and it should work fine from there.
Hello
So this is it. i've tried searching in this forum and google for any possible solution to this issue that is kind of driving me crazy, but i haven't been able to make it work. None of my PC's can detect my device through USB Connection, i have:
1- i have installed all the drivers and Samsung Kies updated to the last version
2- i have enabled usb debugging mode connection and still nothing
3- i have the stock gingerbread 2.3.6
If someone can help me... please i'd really appreciate it :S
tpag02 said:
Hello
So this is it. i've tried searching in this forum and google for any possible solution to this issue that is kind of driving me crazy, but i haven't been able to make it work. None of my PC's can detect my device through USB Connection, i have:
1- i have installed all the drivers and Samsung Kies updated to the last version
2- i have enabled usb debugging mode connection and still nothing
If someone can help me... please i'd really appreciate it :S
Click to expand...
Click to collapse
Even if you have the correct drivers installed, some bad drivers might be picking the device up, overriding the good drivers. If you open up device manager, what shows up when you plug in the phone?
MaxRabbit said:
Even if you have the correct drivers installed, some bad drivers might be picking the device up, overriding the good drivers. If you open up device manager, what shows up when you plug in the phone?
Click to expand...
Click to collapse
Nothing shows up!, that's the thing, the device seems to be recognizing the PC. it makes a sound when i connect it to the pc and the icon of usb connection shows up right on the notificacion bar, but on the pc doesn't make anything.
I installed the official drivers from samsung and Kies Too.
Have you try changing USB port?
Overgloc said:
Have you try changing USB port?
Click to expand...
Click to collapse
Of course!, either the usb cable and even the PC
Try using snappea
tpag02 said:
Hello
So this is it. i've tried searching in this forum and google for any possible solution to this issue that is kind of driving me crazy, but i haven't been able to make it work. None of my PC's can detect my device through USB Connection, i have:
1- i have installed all the drivers and Samsung Kies updated to the last version
2- i have enabled usb debugging mode connection and still nothing
3- i have the stock gingerbread 2.3.6
If someone can help me... please i'd really appreciate it :S
Click to expand...
Click to collapse
Snappea is an app for both windows and your android via which you can connect to your pc
1. First download and install Snappea (Google it "SnapPea" since i cannot post outside links)
2. When installed, it will ask some basic info and after connecting your phone, it will automatically download its android version
3. I guess thats all.... Youll understand its use via the tutorial (pretty much easy)
4. ENJOY!....enjoy transferring your files via pc and android........
Aayush_13 said:
Snappea is an app for both windows and your android via which you can connect to your pc
1. First download and install Snappea (Google it "SnapPea" since i cannot post outside links)
2. When installed, it will ask some basic info and after connecting your phone, it will automatically download its android version
3. I guess thats all.... Youll understand its use via the tutorial (pretty much easy)
4. ENJOY!....enjoy transferring your files via pc and android........
Click to expand...
Click to collapse
Here´s the point, i wanna root the device, i don´t think i'll be able to get it done with that app :S thanks anyway
tpag02 said:
Nothing shows up!, that's the thing, the device seems to be recognizing the PC. it makes a sound when i connect it to the pc and the icon of usb connection shows up right on the notificacion bar, but on the pc doesn't make anything.
I installed the official drivers from samsung and Kies Too.
Click to expand...
Click to collapse
What makes a sound when you connect it to the PC? Does the PC itself make a sound? And you did as I suggested and had Device Manager open when you plugged it in - did it refresh at all?
MaxRabbit said:
What makes a sound when you connect it to the PC? Does the PC itself make a sound? And you did as I suggested and had Device Manager open when you plugged it in - did it refresh at all?
Click to expand...
Click to collapse
The device makes a sound... the pc does nothing, and Device Manager doesn´t refresh.
tpag02 said:
The device makes a sound... the pc does nothing, and Device Manager doesn´t refresh.
Click to expand...
Click to collapse
Strange! Do other devices work when plugged in?
the device makes a sound means it connected to USB only. it can be computer or charger.
did you try uninstalling usb drivers in device manager.
right click and update driver
then select have a disk..
show path ..Program Files\SAMSUNG\USB Drivers..
i can't remember the rest of the part.
then it will recognize
hope this help..
If you want to root why not use exynos abuse?
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
If you want to root why not use exynos abuse?
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
i can't make that work, it says that my kernel is not supported
122ninjas said:
If you want to root why not use exynos abuse?
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
He's on Gingerbread. I thought the exynos abuse only worked on ICS
Sent from my SGH-I777 using xda premium
Red_81 said:
He's on Gingerbread. I thought the exynos abuse only worked on ICS
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Oh then Idk i've never looked into it.
I'm having the same problem with my i777 model.
I uninstalled and re-installed the drivers, I updated the drivers, I tried debugging mode and I've tried "Mass Storage" mode.
Mass Storage mode was the only one that seemed to work for me, when I tried debug mode it would constantly connect and disconnect.
When I try without being in any of those modes, my phone will connect. My computer will recognize and then randomly my phone or computer wont be able to see each other anymore. Like my phone will disconnect from MTP-initialization (but still charge like it's plugged in)...I'm really interested in rooting my phone, but I don't want to since I can't connect my phone correctly. I don't want a $200+ phone becoming a brick and I can't replace it very cheap (anytime soon at least).
Here's phone info if it helps any..?
Model Number: SAMSUNG-SGH-i777
Android Version: 2.3.6
Kernel Version: 2.6.35.7
Build Number: GINGERBREAD.UCKK6
zZSleepyZz said:
I'm having the same problem with my i777 model.
I uninstalled and re-installed the drivers, I updated the drivers, I tried debugging mode and I've tried "Mass Storage" mode.
Mass Storage mode was the only one that seemed to work for me, when I tried debug mode it would constantly connect and disconnect.
When I try without being in any of those modes, my phone will connect. My computer will recognize and then randomly my phone or computer wont be able to see each other anymore. Like my phone will disconnect from MTP-initialization (but still charge like it's plugged in)...I'm really interested in rooting my phone, but I don't want to since I can't connect my phone correctly. I don't want a $200+ phone becoming a brick and I can't replace it very cheap (anytime soon at least).
Here's phone info if it helps any..?
Model Number: SAMSUNG-SGH-i777
Android Version: 2.3.6
Kernel Version: 2.6.35.7
Build Number: GINGERBREAD.UCKK6
Click to expand...
Click to collapse
Man, we're going through the same :S i hope someone can help us
tpag02 said:
Man, we're going through the same :S i hope someone can help us
Click to expand...
Click to collapse
Hmmm...I just tried something. My phone says it's not in MTP, but my PC can read it and open it up.
All I did was turn off my phone, then I plugged it in, then turned it back on and it's doing good so far...might give it a shot, I dunno how well it's really working or nothing though.
|-----EDIT------|
Now it's in MTP Application and synchronizing, I'm just trying to back up my phone with Keis so if I do decide to Root, I can back everything back up.
zZSleepyZz said:
Hmmm...I just tried something. My phone says it's not in MTP, but my PC can read it and open it up.
All I did was turn off my phone, then I plugged it in, then turned it back on and it's doing good so far...might give it a shot, I dunno how well it's really working or nothing though.
|-----EDIT------|
Now it's in MTP Application and synchronizing, I'm just trying to back up my phone with Keis so if I do decide to Root, I can back everything back up.
Click to expand...
Click to collapse
i did this and it kind of recognized it but didn´t install the drivers... i´m gonna keep trying this...
Still nothing
I have S6 edge on Rogers network G925W8, and I was trying to root it using chainfire's g925f, midway process My Phone got disconnected from odin and IDK why, now screen stuck and saying "Error occured while updating. Use the Emergency recovery function on smart switch. But the thing is my smart switch app can't detect my phone anymore, it says Unsupported Device. I even try to use kies and kies 3 but they are looking for recovery code, I don't even know where to get that, kies and smart switch didn't give me any code, I even tried software update and initialization, and it's looking for a S/N but I don't know what's the serial number of my phone, I can only see IMEI on box and my receipt. Any help will be highly appreciated. Thanks.
Mannypac9 said:
I have S6 edge on Rogers network G925W8, and I was trying to root it using chainfire's g925f, midway process My Phone got disconnected from odin and IDK why, now screen stuck and saying "Error occured while updating. Use the Emergency recovery function on smart switch. But the thing is my smart switch app can't detect my phone anymore, it says Unsupported Device. I even try to use kies and kies 3 but they are looking for recovery code, I don't even know where to get that, kies and smart switch didn't give me any code, I even tried software update and initialization, and it's looking for a S/N but I don't know what's the serial number of my phone, I can only see IMEI on box and my receipt. Any help will be highly appreciated. Thanks.
Click to expand...
Click to collapse
download your firmware from www.sammobile.com and flash with odin
put the phone in download mode
https://www.youtube.com/watch?v=kKU7otLN8N4&feature=youtu.be&list=UURAxVOVt3sasdcxW343eg_A
but i can't find the firmware for my phone g925w8. odin and smartswitch can't even detect my phone.
Mannypac9 said:
but i can't find the firmware for my phone g925w8. odin and smartswitch can't even detect my phone.
Click to expand...
Click to collapse
http://downloadandroidfiles.org/fil.../Canada/RWC-G925W8VLU1AOCG-20150415155020.zip
here you go
im good to you lol
---------- Post added at 06:57 AM ---------- Previous post was at 06:56 AM ----------
Mannypac9 said:
but i can't find the firmware for my phone g925w8. odin and smartswitch can't even detect my phone.
Click to expand...
Click to collapse
are you putting your phone in download mode and have you got the drivers installed
Sorry I can't quote because I have less than 10 post. Yup, I have already Samsung drivers installed here on my PC, do I need a separate USB drivers for S6 edge? and yes eventhough my phone is kinda brick i can still put it on download mode, but my pc can't detect my phone, it says USB not recognized.
Mannypac9 said:
Sorry I can't quote because I have less than 10 post. Yup, I have already Samsung drivers installed here on my PC, do I need a separate USB drivers for S6 edge? and yes eventhough my phone is kinda brick i can still put it on download mode, but my pc can't detect my phone, it says USB not recognized.
Click to expand...
Click to collapse
try different usb/and cable
http://androiddrivers.net/samsung-android-drivers/galaxy-s6-s6-edge-windows-drivers/
---------- Post added at 07:34 AM ---------- Previous post was at 07:31 AM ----------
Mannypac9 said:
Sorry I can't quote because I have less than 10 post. Yup, I have already Samsung drivers installed here on my PC, do I need a separate USB drivers for S6 edge? and yes eventhough my phone is kinda brick i can still put it on download mode, but my pc can't detect my phone, it says USB not recognized.
Click to expand...
Click to collapse
use this odin http://highonandroid.com/download-odin-v3-10-6/
thanks so much for your help man.
thats the odin version im using right now.. and i tried 3 different usb cables, on different ports and still no luck. even tried it on other pc with all the drivers installed, they still cant detect my phone. :crying:
I even downloaded the latest USB driver which is 1.5.51 but its still not recognized.
Mannypac9 said:
thanks so much for your help man.
thats the odin version im using right now.. and i tried 3 different usb cables, on different ports and still no luck. even tried it on other pc with all the drivers installed, they still cant detect my phone. :crying:
I even downloaded the latest USB driver which is 1.5.51 but its still not recognized.
Click to expand...
Click to collapse
join my community and ask there https://plus.google.com/communities...con&utm_medium=chrome_app&utm_campaign=chrome
Dear @Mannypac9,
When you put your device to ODIN mode and connect it to your PC dose your PC plays USB plugged in sound or not? if yes can I ask you to post screenshot of your device manger with the S6 edge connected?
Regards
jaythenut said:
http://downloadandroidfiles.org/fil.../Canada/RWC-G925W8VLU1AOCG-20150415155020.zip
here you go
im good to you lol
Click to expand...
Click to collapse
Wait is that a working firmware? Should this work for telus?
Where did you get it? I'm just about to buy but first thing first I wanna make sure
I have
1- Stock firmware
2- root method
3- compatible recovery
3- compatible Custom Roms
I got stuck with the 25 active g870w for too long rooted with only stock Rom
Don't want to do same mistake.
Regard
Jon
jaythenut said:
join my community and ask there https://plus.google.com/communities...con&utm_medium=chrome_app&utm_campaign=chrome
Click to expand...
Click to collapse
bluff master said:
Dear @Mannypac9,
When you put your device to ODIN mode and connect it to your PC dose your PC plays USB plugged in sound or not? if yes can I ask you to post screenshot of your device manger with the S6 edge connected?
Regards
Click to expand...
Click to collapse
Problem solved. I just borrow another USB cord, it's just weird all those 3 that I used was directly from my samsung phone package before.. Thanks for the help guys.
I have the same issue. But in my case I hear the USB sound when I plug in and plug out the USB cable, but the Smart Switch does not recognize my device. :/
Dear @rafaelpinaf
1) is it still the same after restarting your PC and changing USB Ports?
2)kindly check in device manger if there is "unknown devices", Kindly post screen shot (with your device attached to the PC).
Regards
bluff master said:
Dear @rafaelpinaf
1) is it still the same after restarting your PC and changing USB Ports?
2)kindly check in device manger if there is "unknown devices", Kindly post screen shot (with your device attached to the PC).
Regards
Click to expand...
Click to collapse
1) Yes! I did everything!
2) The PC recognize the USB port with the cellphone. THe Smart Switch do not. Follow attached!
rafaelpinaf said:
1) Yes! I did everything!
2) The PC recognize the USB port with the cellphone. THe Smart Switch do not. Follow attached!
Click to expand...
Click to collapse
Did you try to completely uninstall kies & smart switch & usb drivers , after that install smart switch and plug in your device
Regards
Hello everyone,
I read many useful information’s about this watch here on forum, however didn’t find solution for my case. I got a Xiaomi Amazfit. The watch is not charging or turning on. It is possible to connect it via USB cable to a Windows machine, the device stays as "unrecognized". My theory is that the ROM is hardly broken.
Here is my question: Is there a method to flash the watch via flashtool (or similar). All tutorials require the watch to be able to go to fastboot, and this can’t be done in this case. I can’t connect this as adb device also. I have done several times a flash procedure on phones that could not be turned on. Hope You can help me
Best regards Daniel
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
silver-alx said:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
Click to expand...
Click to collapse
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
jcyaoo said:
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
Click to expand...
Click to collapse
I already tried this. As i sead. I get the device detected on windows (unknown device). I presume someone tried to flash it on the past. I look for a way to copy software to it. Its not turning on (blackacrean).
Any ideas?
kantor_d said:
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
Click to expand...
Click to collapse
Look at the end of the thread
I disasembled the base Nd found lut thats 2 Pina where demaged. Its nowy functional but like i told you- its not turning on. Justyna this USB dvice in Windows is showing up (unknown device...)
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
kantor_d said:
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
Click to expand...
Click to collapse
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
kantor_d said:
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
silver-alx said:
kantor_d said:
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
Fix?
Did you fix it? And how?
kantor_d said:
silver-alx said:
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
I am with the same problem, only that my nor as unknown device it appears, simply connect in the pc and it does not change anything, it was after a flash that it erased and it did not return more
Click to expand...
Click to collapse
As I had had the same problem, I'll share my mysterious experiences. After I used pace for 1 month it become dead but while keep pushing power button, the white flash appear and then off. I changed the wall adaptor and then the watch revived.
For several days ago the watch gone dead and no white flash on when pushed power on 2 secs. anymore. I tried to change adaptor but nothing happen. I tried to clean the contact of both watch and ring, but it still dead.
Finally I switched the power cord from samsung mobile wire to Blackberry cord, it resurrected.
So I suggest you all to try changing the charging system may solve this problem.