Related
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
mrachni said:
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
Click to expand...
Click to collapse
Reinstall previous stock ROM.
But how? Where to find it?
I must do that from SD card if i understand?
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
No, you can flash it over ActiveSync.
About stock ROM; with aria ROM do you have? do you have a branded device?
SPL - 3.03 and ROM 3.14... Affecting installation for W7?
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Innvizible said:
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Click to expand...
Click to collapse
Ass for I know, to be able to install WP7 ROM on your HD2 you will need HSPL. And probably you know it already, but stock ROM 3.14 isn't compatible with HSPL, so yes you need to downgrade your stock ROM before.
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
similar problem on my HD2
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
tazeemn said:
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
Click to expand...
Click to collapse
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Innvizible said:
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
Click to expand...
Click to collapse
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
kurt-willems said:
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Click to expand...
Click to collapse
You are right about that. I stand corrected. This was proven through my tests yesterday. In the past, with my Athena, it worked differently.
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
2.07.50 also worked fine for me for WinMO 6.5 (Energy), Darkstone SuperRam 1.5 and WP7. In fact WP7 NAND & Darkstone from SD ran fine with MAGLDR112.
Updated Radio solved problem
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
Worked like a charm. I put on Leo_RADIO_2.15.50.14** from one of the threads and from then on I then put back SPL-2.08HSPL and then loaded MAGLDR112 and it allowed me to access bootloader and from there I loaded the DWI file for Windows 7. Everything became kinda self-explanatory after following your help... Awesome, Windows 7 rocks... Off to activate the live services...
Alright guys so I'm trying to install a custom rom but I' m stuck because I cannot even get hspl installed.
I have an AT&T Titan and am using a selfmade y- cable and to gold card. I flashed the OSPL 2.5 via goldcard and it worked with success, next I ran HSPL Wizard and it said that hspl installed correctly but when the device rebooted hspl wasn't installed.(Picture 1)
So I'd tried reflashing the stock Rom"IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE" to redowngrade the Spl and it flashed with success!(Picture 2)
The problem now is that even after flashing the stock rom the spl is still "2.5" when it should be "1.10"(Picture 3)
So my question to you fine gentelmen is, "Does anyone know of a way to get my spl to change?"
Thank you all in Advance!
Also now when I try to gold card anything other than a signed Cingular rom my device shows loading... the card reader flashes a few times, and then it jumps staight back to the spl loader mode?(like pic 1 and 3)
I haven't done it yet, but I am when my cables get here, but I have read the ENTIRE thread of Gold Card and DFT's HSPL for 2nd Gen devices, so I'll take a stab at it first.
you said I flashed the OSPL 2.5 via goldcard and it worked with success,, the OSPL is the original SPL when you need to bring it back to stock for warranty reasons. But that doesn't explain as to why your pics say that you SPL is 2.05 either. From my reading, if your SPL is now 2.05, you can flash HSPL and custom ROMS.
I would flash the SPL again, using the SPL not OSPL.
I'm sure you did that initially and just typed it wrong or I'm misunderstanding you.
Yeah I actually meant just the spl that came with dft's hspl.
i'm in the process of rewiring my y-cable and trying to start fresh!
Will post the results!
Thanks for replying though man!
I managed to get back my spl to 1.10 from 2.6 (from the recent HTC update), by flashing the stock rom twice. This was coincidental, while I trying to get the internet sharing to work with my att titan 1 (there is a thread for this in this forum)- This how I did it: flash stock cingular rom, then forced cab update to 8107; booted phone then reset while booting up switched it again to spl mode to reflash stock cingular rom second time then forced update cab update again to 8107, following this i did a factory reset. After all this long drawn process I didn't get the internet sharing to work but for some reason it did downgrade spl from 2.6 to the original 1.10
BTW, my att titan is now unbranded, flashed with european stock rom using goldcard with spl 2.5
Same Issue here.. except I'm on the 2.5 that came with DFT's folder.. I can only flash the AT&T .nbh nothing else
I can't even get to 2.6 (HTC update). stuck on 2.5
habnzrot said:
I managed to get back my spl to 1.10 from 2.6 (from the recent HTC update), by flashing the stock rom twice. This was coincidental, while I trying to get the internet sharing to work with my att titan 1 (there is a thread for this in this forum)- This how I did it: flash stock cingular rom, then forced cab update to 8107; booted phone then reset while booting up switched it again to spl mode to reflash stock cingular rom second time then forced update cab update again to 8107, following this i did a factory reset. After all this long drawn process I didn't get the internet sharing to work but for some reason it did downgrade spl from 2.6 to the original 1.10
BTW, my att titan is now unbranded, flashed with european stock rom using goldcard with spl 2.5
Click to expand...
Click to collapse
I reflashed the stock rom, and tried cab update to 8107 but when I run cab sender tool it finishes "restarting your phone..Error: System.Exception: Firmware Device is null at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List' 1 updates, UpdateType type)
at wm7update.Program.Main(String[] args)"
Never used cab sender so I have no idea what this means.
Sorry mate, I can't help you with that error. I haven't had any problem with cab sender with stock cingular rom. Try to search the other forum re cab sender. I wonder if this is to do with the DFT 2.5 spl. Why not try to debrand your att titan using the goldcard method? this might be the long process if you can't get the cab update going.
Now I'm stuck on 7720 .. CabSender Doesn't work (null Firmware)... Can't Flash Europe 2.05 rom using GoldCard... I'm stuck with 2.5(DFT) SPL even when i try flashing the SPL 2.6 from HTC or the HSPL from DFT.... Whatever SPL they made or got it from..... It won't upgrade/downgrade.
This is Nice...
IronMan1289 said:
I reflashed the stock rom, and tried cab update to 8107 but when I run cab sender tool it finishes "restarting your phone..Error: System.Exception: Firmware Device is null at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List' 1 updates, UpdateType type)
at wm7update.Program.Main(String[] args)"
Never used cab sender so I have no idea what this means.
Click to expand...
Click to collapse
I believe it has something to do with language cabs being sent with update cabs.
Sent from my PI39100 using XDA Windows Phone 7 App
I'm just throwing this out there...but it seems that ATT Titans seem to be getting half brick issues more compared to unbranded devices.
Did you guys stay at stock SPL 1.10 (never upgraded the bootloader from the HTC website) when you tried installing the HSPL through goldcard?
OR
Did you upgrade the bootloader (off the HTC website) to upgrade the SPL to 2.6 before trying the goldcard?
I have not tried anything yet with my phone, but I was curious because half of the Titans have SPL 2.6 already from HTC while all/most ATT users are stuck at 1.10. -Would this have anything to do with the problems we are having?
Tachi91 said:
Now I'm stuck on 7720 .. CabSender Doesn't work (null Firmware)... Can't Flash Europe 2.05 rom using GoldCard... I'm stuck with 2.5(DFT) SPL even when i try flashing the SPL 2.6 from HTC or the HSPL from DFT.... Whatever SPL they made or got it from..... It won't upgrade/downgrade.
This is Nice...
Click to expand...
Click to collapse
Flashing the stock rom twice reverted the spl back to 1.10 for someone else earlier today. its worth a shot.
Sent from my PI39100 using XDA Windows Phone 7 App
xconomicron said:
I'm just throwing this out there...but it seems that ATT Titans seem to be getting half brick issues more compared to unbranded devices.
Did you guys stay at stock SPL 1.10 when you tried installing the HSPL through goldcard?
OR
Did you upgrade the bootloader off the HTC website to upgrade the SPL to 2.6 before trying the goldcard?
I have not tried anything yet with my phone, but I was curious because half of the Titans have SPL 2.6 already from HTC while all/most ATT users are stuck at 1.10. -Would this have anything to do with the problems we are having?
Click to expand...
Click to collapse
I had SPL 1.10 ... Then I made a GoldCard with the 2.05 SPL within the DFT folder and flashed... The Bootloader then read 2.5.XXXXX ... So I assumed all went well and ran the HSPL Install program.. It continued successfully and claimed HSPL was installed.. I restarted the phone and the bootloader still read 2.5.XXXX
GreenGrenadez said:
I believe it has something to do with language cabs being sent with update cabs.
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Even without the Language cab it fails... And the phone does not stay in the Zune Update Screen for long... If I restart the phone and manually enter the Zune Screen (Vol-) it restarts after 2~ seconds.
----
I tried flashing the Cingular 1.10 rom twice via GoldCard and RUU both flashed successively but kept the SPL at 2.5
habnzrot .. From what i assume did not attempt HSPL, merely updated to HTC 2.6 SPL then unbranded the titan by flashing Europe ... essentially going from 2.6 > 2.05 > 1.10
Whatever is going DFT SPL2.05 is preventing it from being rewritten up or down
Back on 8107 ... Run the Cabsender and while the phone is restarting for the first time.. Pull the Battery and then Power on the phone while holding (vol-)
The downgrade happened when I was on stock Cingular rom with spl 2.6 (upgraded through HTC recent bootloader update) as I said previously it was a pure coincidence whille I was trying to get my internet sharing to work. When I unbranded my titan though goldcard, I first upgraded it using the HTC update so I was back to spl 2.6 ATM I have not tried to flash the HSPL.
This is very interesting...on the DFT thread on the Windows forum, it seems very few people with ATT Titans have the HSPL and actually flashed a custom rom.
So Tachi, just for confirmation your phone actually had "HSPL" 2.5.xxxx after goldcard? or just SPL 2.5.xxxx??? I think the OP had just "SPL" 2.5.xxxx after trying to goldcard with HSPL.
It would be very interesting if this has to do with the original SPL number on the phone. When you upgrade to SPL 2.05 (which is basically the same/modified HTC's 2.5 SPL?) it's possible that it doesn't "successfully" upgrade when we have SPL 1.10 even if it does say "successful."
Now going back to your problem...and once again I am throwing this out there...
Have you tried reflashing the stock OS with with Advanced RUU?
http://forum.xda-developers.com/showthread.php?t=1637294
I am not entirely sure if what this does as it may be just another way to flash through RUU, but I remember Task 29 on WinMobile where it practically wiped the phone before you could install the a new/stock OS/SPL.
xconomicron said:
This is very interesting...on the DFT thread on the Windows forum, it seems very few people with ATT Titans have the HSPL and actually flashed a custom rom.
So Tachi, just for confirmation your phone actually had "HSPL" 2.5.xxxx after goldcard? or just SPL 2.5.xxxx??? I think the OP had just "SPL" 2.5.xxxx after trying to goldcard with HSPL.
It would be very interesting if this has to do with the original SPL number on the phone. When you upgrade to SPL 2.05 (which is basically the same/but modified HTC's 2.5 SPL) it's possible that it doesn't "successfully" upgrade when we have SPL 1.10 even if it does say "successful."
Now going back to your problem...and once again I am throwing this out there...
Have you tried reflashing the stock OS with with Advanced RUU?
http://forum.xda-developers.com/showthread.php?t=1637294
I am not entirely sure if what this does, but I remember Task 29 on WinMobile where it practically wiped the phone before you could install the a new/stock OS/SPL.
Click to expand...
Click to collapse
I had 1.10 then I used the GoldCard to flash DFT 2.05 SPL ... Thats when It showed 2.5 ... I attempted afterwards to flash HSPL but the SPL remained at 2.5 ..
I tried using the Advanced RUU but its the same.
task28 stops task29 which formats the Partition where the UserData is stored... It leaves the radio/SPL untouched. Now task00 stops task28 from taking place keeping UserData, but it fails when i try doing a task00/28 with the 2.05 SPL DFT provided.
Tachi91 said:
I had 1.10 then I used the GoldCard to flash DFT 2.05 SPL ... Thats when It showed 2.5 ... I attempted afterwards to flash HSPL but the SPL remained at 2.5 ..
I tried using the Advanced RUU but its the same.
task28 stops task29 which formats the Partition where the UserData is stored... It leaves the radio/SPL untouched. Now task00 stops task28 from taking place keeping UserData, but it fails when i try doing a task00/28 with the 2.05 SPL DFT provided.
Click to expand...
Click to collapse
That is BALLS!!! yea, thanks for the info on "Task" - I totally did not know that. Well I will continue to look into this issue. I might even try it myself once I get my Y cable here in the next few days. But anyway, hopefully more folks will chime in to help you over on the DFT thread.
Does anyone know if we can overwrite the spl via cabs?
Sent from my PI39100 using XDA Windows Phone 7 App
IronMan1289 said:
Does anyone know if we can overwrite the spl via cabs?
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
No.. cabs work only on things that deal with the OS. Bootloader, Radio, SPL are too low level actions.
Have anybody fixed this cabsender error: "system.exception: firmware device is null"? I still can't upload language pack. What I'm doing wrong?
I've just unlock my Titan as described ht tp://ww w.youtube.com/watch?v=drTVTuj71TY
Is there a HSPL for the AT&T Titan yet? Goldcard didn't work Trying to flash stock rom worked, but didn't downgrade SPL So, I diffinetly need HSPL for a branded AT&T Titan. Thanks
Take a look over here at forum.xda-developers.com/showthread.php?t=1744253. You'll have some reading to do.
If you tried the SPL / HSPL on your AT&T Titan first (before debranding) then you are stuck without a fix (as of yet).
I was in the same boat and my Titan had a memory issue and caller's sound quality was horrible, so I got a warranty exchange from AT&T. When my new one arrived, I de-branded it first with the EUR ROM, then flashed SPL / HSPL and now I absolutely LOVE my Titan (prior, I HATED it). Now (after 6 replacements & no AT&T locks) I have a custom ROM and everything is unlocked and no caller sound quality / memory problems.
Sucks for me then...
GreenGrenadez said:
If you tried the SPL / HSPL on your AT&T Titan first (before debranding) then you are stuck without a fix (as of yet).
I was in the same boat and my Titan had a memory issue and caller's sound quality was horrible, so I got a warranty exchange from AT&T. When my new one arrived, I de-branded it first with the EUR ROM, then flashed SPL / HSPL and now I absolutely LOVE my Titan (prior, I HATED it). Now (after 6 replacements & no AT&T locks) I have a custom ROM and everything is unlocked and no caller sound quality / memory problems.
Click to expand...
Click to collapse
Thanks for the info. I guess I will have to wait til developers come up with something for AT&T Titan. I wised the instructions included info for SPL/HSPL on AT&T Titan, Oh well.
Well they didn't know it was going to he different. In all my HtC devices, this is the first that has been different and the most complicated I must say.
Sent from my Lumia 900 using XDA Windows Phone 7 App
franchize1989 said:
Thanks for the info. I guess I will have to wait til developers come up with something for AT&T Titan. I wised the instructions included info for SPL/HSPL on AT&T Titan, Oh well.
Click to expand...
Click to collapse
Hello, if you actually checked the bottom of the guide I've written for this, it provides instructions on how to apply HSPL for your Titan, assuming you did all the correct steps on debranding it first
V. HSPL
i. Once confirming you have 2.5.xxxx.xx on your SPL screen, you will now proceed to the final part: enabling HSPL. What you will need to do is navigate once more into "DFT_HSPL_WP7SG1" (the .rar file you downloaded from DFT), and go here: >DFT_HSPL_WP7SG1>2_HSPL>DFT_HSPL_WP7SG1_INSTALL.ex e. Open the executable and properly read the instructions.
ii. Enter SPL once more on your phone and plug it into your computer, making sure that it says "usb" in black letters towards the bottom portion of the screen.
iii. Click next on the program and read careful about what requirements you will need on the computer. Typically, it should all be there, but it never hurts to make sure.
iv. Take a deep breath and click next. It will attempt to connect to the phone. If it succeeds, continue reading the instructions the program will display. If it does not work, recheck your wire connection and that you have spl 2.5.xxxx.xx on your device, and that it is in SPL mode.
v. Make sure you select the rom version that you have (it should be the only selection there, but just make sure it is before continuing). Select next once you've made your selection.
vi. It will install HSPL. Once completed, the phone may reboot itself back into SPL mode. If it has succeeded, underneath where it shows your rom version, it will either have "DFT" or "CotullaH" written there. Mine says "CotullaH".
Click to expand...
Click to collapse
pbp8ntballer said:
Hello, if you actually checked the bottom of the guide I've written for this, it provides instructions on how to apply HSPL for your Titan, assuming you did all the correct steps on debranding it first
Click to expand...
Click to collapse
I know exactly where he is stuck because he is using USA AT&T Titan. The HSPL instructions doesn't warn USA AT&T Titans owners of the issue (AND IT SHOULD). So, if you following the procedure that every custom ROM points to exactly (like I did and a lot of other people did) you will be stuck on 2.5 SPL with no way out.
I haven't seen a warning to USA AT&T Titans anywhere that should say to de-brand your Titan first before attempting the HSPL or you'll be stuck.
Your outline will not help this person where he is stuck. Cotulla is working on it (I do believe).
There are a few warnings on the developer forum that AT&T branded phones must first be debranded before the phone can flashed with other roms
Ok, if you say so.
malvo26 said:
There are a few warnings on the developer forum that AT&T branded phones must first be debranded before the phone can flashed with other roms
Click to expand...
Click to collapse
by getting my AT&T Titian stuck at SPL 2.5
does this mean my phone is locked from any future customization?
that would really suck
franchize1989 said:
by getting my AT&T Titian stuck at SPL 2.5
does this mean my phone is locked from any future customization?
that would really suck
Click to expand...
Click to collapse
Not totally. You can still update the OS thru cab loader method to Tango and I assume soon after the 7.8 is released you'll be able to do the same. The only thing is you are stuck with crappy stock AT&T ROM. I say crappy because I absolutely hated my phone until I got custom ROM on it. Can you do a warranty exchange with AT&T?
Easy to follow thread for hspl
http://forum.xda-developers.com/showthread.php?t=1684912
If you have the image (or .nbh file) and you dont have it names ETERIMG.nbh it will not flash
here's why, The HTC OEM's names the device eternity. For the USB mode to be able to recognice the correct rom to flash it has to fit the model of phone you have. ETER is the first 4 letters to its OEM name. Add IMG and you got yourself the correct name for flashing roms to your device.
GreenGrenadez said:
Not totally. You can still update the OS thru cab loader method to Tango and I assume soon after the 7.8 is released you'll be able to do the same. The only thing is you are stuck with crappy stock AT&T ROM. I say crappy because I absolutely hated my phone until I got custom ROM on it. Can you do a warranty exchange with AT&T?
Click to expand...
Click to collapse
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
franchize1989 said:
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
Click to expand...
Click to collapse
Cotulla is working on it (I do believe). I stopped reading the thread (http://forum.xda-developers.com/showthread.php?t=1684912) when I got my new device in and de-branded it first (there by preventing the situation that you are in), however, where I left off in my following that thread was Cotulla asking for USA AT&T testers. I have followed the email notifications that I get from that thread, and nothing new that I've seen. On pages 25 - 28 you'll find that Cotulla is (or was) working on it.
So to answer your question, I tried everything when I was stuck on SPL 2.5 and nothing worked. You are stuck on AT&T stock ROM for now. Maybe throwing $$ at Cotulla would speed the process up?:fingers-crossed:
Hope this helps
franchize1989 said:
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
Click to expand...
Click to collapse
Hi, I'm currently on a debranded ATT Titan HSPLed with custom rom. Previously I managed to downgrade my SPL from euro v4 back to stock Cingular rom v1.10 These are the steps I took to downgrade:
1. Flashed stock Cingular rom 1.10 using RUU. This brings my Titan from euro Tango rom to stock cingular rom. However the SPL version was stucked at v4
2. Out of desperation, I flashed the stock TEST Cingular rom 2.01 from this thread: http://forum.xda-developers.com/showthread.php?t=1477189 again using RUU.
3. Please note that cingular rom 2.01 is a demo/test rom so its not functional.
4. RE-flashed stock Cingular rom 1.10. This time around it downgraded my SPL from v4 to the stock v1.10
Give this a try, and report back. If it works please before trying again to flash HSPL, debrand your titan to euro rom 2.05 using goldcard method
Goodluck.
habnzrot said:
Hi, I'm currently on a debranded ATT Titan HSPLed with custom rom. Previously I managed to downgrade my SPL from euro v4 back to stock Cingular rom v1.10 These are the steps I took to downgrade:
1. Flashed stock Cingular rom 1.10 using RUU. This brings my Titan from euro Tango rom to stock cingular rom. However the SPL version was stucked at v4
2. Out of desperation, I flashed the stock TEST Cingular rom 2.01 from this thread: http://forum.xda-developers.com/showthread.php?t=1477189 again using RUU.
3. Please note that cingular rom 2.01 is a demo/test rom so its not functional.
4. RE-flashed stock Cingular rom 1.10. This time around it downgraded my SPL from v4 to the stock v1.10
Give this a try, and report back. If it works please before trying again to flash HSPL, debrand your titan to euro rom 2.05 using goldcard method
Goodluck.
Click to expand...
Click to collapse
this dont work to go back to 1.1 spl to start over
we need cotulla to work it out
elmanortega said:
this dont work to go back to 1.1 spl to start over
we need cotulla to work it out
Click to expand...
Click to collapse
Exactly what I've been saying. The only out right now, is to send it back to AT&T and trade for another one.
GreenGrenadez said:
Exactly what I've been saying. The only out right now, is to send it back to AT&T and trade for another one.
Click to expand...
Click to collapse
Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
pjodm said:
Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
Click to expand...
Click to collapse
At this point, I'm deperate. Thanks for the advice, I will be sure try this method and hope for the best. I'll try to keep everyone updated with my results in this thread. Thanks again :good:
GreenGrenadez said:
I know exactly where he is stuck because he is using USA AT&T Titan. The HSPL instructions doesn't warn USA AT&T Titans owners of the issue (AND IT SHOULD). So, if you following the procedure that every custom ROM points to exactly (like I did and a lot of other people did) you will be stuck on 2.5 SPL with no way out.
I haven't seen a warning to USA AT&T Titans anywhere that should say to de-brand your Titan first before attempting the HSPL or you'll be stuck.
Your outline will not help this person where he is stuck. Cotulla is working on it (I do believe).
Click to expand...
Click to collapse
My outline comes from the guide I made specifically for AT&T phones that need to do in order to safely debrand and install hspl.
So, if the person went to read the guide fully (where I mention several times that this process is required if they wish to install custom roms) then they can find that they'd be most likely be able to install HSPL after using my debranding method.
My AT&T Titan has HSPL applied and running a custom rom, and there's a picture guide provided in the post to show it.
However, I agree, I do not see any warnings that normally, you can't install HSPL on an AT&T HTC Titan all by itself without debranding. Honestly, there should be, because I can't count how many posts I've seen of people soft-bricking/bricking their devices.
EDIT: However, I guess I forgot to add, you cannot do anything after you applied the custom 2.5 SPL provided by DFT, IF you didn't debrand it prior. If you did debrand your phone, obviously you'll be fine. If you haven't though, then you'll be stuck along with everyone else and you'll need to get a new phone or wait for the fix.
pjodm said:
Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
Click to expand...
Click to collapse
If this actually works, we need to spread the news about. There are still a bunch of AT&T Titans locked out there on SPL 2.5. franchize1989, OP, give us an update if it worked or not. Good luck
So as title says I want every god damn person who have, had this kind of buged phone, tell their expirence, for start I will tell mine.
When i got phone in about was writen x310e, then in SPL screen was written spl 2.5.16.xx in bottom F400, no connection to PC, my next step was to download every god damn europan eternity ROM and flash it via Gold card, when i was getting tierd of changing memory sticks i found one that did the trick with HD7, so i was happy but bump, no work on Titan, so I was searching for solutions and found Cingular eternity ROM with 1.x.xx, so i tried to flash it via gold card and it worked!!! BUT(one big but) it didnt changed Baseband version it stayed 2.5.16.xx i was kinda surprised i thought the flashing failed, but it didnt, the F400 was away and i have Cingular ROM, next step was trying to flash 4.06 bb 2.06... Nothing worked, so i thought i destroyed it since after cingular ROM nothing was flashable, the HSPL allways showed success but nothing changed in SPL screen, but my Titan isnt unflashable it can only be flashed vai goldcard with famous Cingular stock ROM, i managed to update Titan via cab and thats my max triumph.
My humble opinion is that the baseband chip got overloaded or mybe locked to this single stock ROM witch is Designed for this version of Titan.
I have and offer that for 20 euros a phone repair shop can do something with my phone and change the baseband same as make it posible to run customs ROM, they told me 99% it will work, tho he didnt wanted to tell me the method he will use, i supose the J-TAG box method.
You all are free to comment on my case and tell your I am willing to do something extra for at&t Titan users.
Thanks for reading
..... lucky
Ok, I'm in same situation. My titan is trapped in spl 2.5 and the only rom I can flashed is the Cingular eternity rom. You're lucky man if you can flash a custom rom if you're titan was trapped in spl 2.5. Need to know in more detail what do you do to got the freedom.
I'm not getting this, so you're saying you have an AT&T Titan with a model X310e? I though US Titan models are X310a.
It was saying x310e because i had europan ROM when i got it, how that guy managed to install european ROM on it have no clue, all i know is i couldnt install that ROM again after i flashed Cingular ROM, if i could i would investigate how he did it, but i think he flashed European eternity ROM with spl 2.05 without debranding phone first so he got stuck in 2.05 and F400 errror. That is my opinion
I'd say the same thing, the SPL block probably been overwritten by the X310e model. Happened to my DE Trophy, HSPL'd first then installed a stock NZ Rom, but bootloader has been overwritten by the NZ ROM, now the CID is broken but it still recognizes itself as DE Trophy.
So i found this ROM and flashed it IMG Eternity Cingular 2.01.502.04 Radio 16.23.03.17_16.27.00.23U OS 7.10.7740.16 TEST and it did flash, but Bootloader Version didnt changed
nikola92 said:
It was saying x310e because i had europan ROM when i got it, how that guy managed to install european ROM on it have no clue, all i know is i couldnt install that ROM again after i flashed Cingular ROM, if i could i would investigate how he did it, but i think he flashed European eternity ROM with spl 2.05 without debranding phone first so he got stuck in 2.05 and F400 errror. That is my opinion
Click to expand...
Click to collapse
The European ROM can be flashed; change the image name from ETERIMG to ETERDIAG; be patient; it will flash; my device says x310e but the SPL remains 2.5.160015.3 (137079). A couple of days ago I got that same F400 error and I reflashed and it went away. He isn't using a custom ROM, what he did was use the WP7 Cab Sender and updated the OS to the latest build which is 8773 (8779 for some AT&T language packs).
I just HSPL'd my device...all of you with x310e ROMs, I will post this in detail later today...I put on my gold card DFT's NBH file for the SPL2.05...it took forever for the "Enter USB Host Mode" to change to load, but it will; next restart the device in bootloader and run DFT's HSPL...I think you have to be really, really patient with the USB Host...I will post more over on DFT thread later.
nikola92 said:
So as title says I want every god damn person who have, had this kind of buged phone, tell their expirence, for start I will tell mine.
When i got phone in about was writen x310e, then in SPL screen was written spl 2.5.16.xx in bottom F400, no connection to PC, my next step was to download every god damn europan eternity ROM and flash it via Gold card, when i was getting tierd of changing memory sticks i found one that did the trick with HD7, so i was happy but bump, no work on Titan, so I was searching for solutions and found Cingular eternity ROM with 1.x.xx, so i tried to flash it via gold card and it worked!!! BUT(one big but) it didnt changed Baseband version it stayed 2.5.16.xx i was kinda surprised i thought the flashing failed, but it didnt, the F400 was away and i have Cingular ROM, next step was trying to flash 4.06 bb 2.06... Nothing worked, so i thought i destroyed it since after cingular ROM nothing was flashable, the HSPL allways showed success but nothing changed in SPL screen, but my Titan isnt unflashable it can only be flashed vai goldcard with famous Cingular stock ROM, i managed to update Titan via cab and thats my max triumph.
My humble opinion is that the baseband chip got overloaded or mybe locked to this single stock ROM witch is Designed for this version of Titan.
I have and offer that for 20 euros a phone repair shop can do something with my phone and change the baseband same as make it posible to run customs ROM, they told me 99% it will work, tho he didnt wanted to tell me the method he will use, i supose the J-TAG box method.
You all are free to comment on my case and tell your I am willing to do something extra for at&t Titan users.
Thanks for reading
Click to expand...
Click to collapse
can you help me,please.(i want to flash room 7.8 and fix error code.)
my mobile is htc titan.it has some infomation: PI39100 MFG
SPL-2.5.160015(137079)
eMMC SND 15188MB
TOUCH A1(F:81,Í:1,V11,B:F8)
RADIO-16.23.02.26_A
thanks!
thuan92xd said:
can you help me,please.(i want to flash room 7.8 and fix error code.)
my mobile is htc titan.it has some infomation: PI39100 MFG
SPL-2.5.160015(137079)
eMMC SND 15188MB
TOUCH A1(F:81,Í:1,V11,B:F8)
RADIO-16.23.02.26_A
thanks!
Click to expand...
Click to collapse
Just follow the steps I have posted or other instructions where the debrand instructions are; read that entire thread thoroughly; my device began with those specs but now I'm HSPL and using a 17 version Radio. Be patient; read it and the HSPL thread and Wiki.
Bootloader problem?
Your problem is exactly like I had when the HTC bootloader (no matter if SPL HSPL or RSPL is used) got "semi-bricked" , although the auto-turn offs I also experienced vanished in two or three weeks after installing OS (depends on amount of restarts)
This was on another Mango-Tango device (Trophy) but semi bricked for sure......And I guess your device was recovered and then sold after being dumped before as -"completely bricked"- by another owner.
berrywr said:
The European ROM can be flashed; change the image name from ETERIMG to ETERDIAG; be patient; it will flash; my device says x310e but the SPL remains 2.5.160015.3 (137079). A couple of days ago I got that same F400 error and I reflashed and it went away. He isn't using a custom ROM, what he did was use the WP7 Cab Sender and updated the OS to the latest build which is 8773 (8779 for some AT&T language packs).
I just HSPL'd my device...all of you with x310e ROMs, I will post this in detail later today...I put on my gold card DFT's NBH file for the SPL2.05...it took forever for the "Enter USB Host Mode" to change to load, but it will; next restart the device in bootloader and run DFT's HSPL...I think you have to be really, really patient with the USB Host...I will post more over on DFT thread later.
Click to expand...
Click to collapse
Hi,
my Titan is stuck at
PI39100 MFG
SPL-2.5.160015.3(137079)
with europian official 7.5 rom
I can't HSPL. I wonder if I may rename the ETERIMG to ETERDIAG for the SPL2.05 so I can reinstall it, just it case the device may unblock...
Have looked around but cannot find a stock Cingular HTC Titan (Eternity ?) rom. Previous thread hosted by Football is defunct.
Can anyone please point me to Stock Singular HTC Titan rom?
I am trying to uninstall HSPL ( I am at the dreaded 2.5 SPL, ATT Titan 1) and need this stock rom to try to revert back to 1.0 SPL.
For my ATT HTC Titan I, I debranded, SPL, HSPL and it says HSPL is there on the Phone's SPL screen - but I cannot use any custom rom that uses Radio 17. Only radio 16 works.
Thanks
my SPL screen shot
My SPL screen shot is attached below
BTW, anyone see any issues with the SPL screen above?
I am unable to run any rom that needs radio 17.
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
Your HSPL is good.
When you flash rom that needs radio 17. you Flash radio 17 too?
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
There is nothing wrong with your phone; in fact there are many here who would give their life to own your phone. For many of the custom ROMs here you have to flash "radio 16" with radio 17. If you have not done this then your phone will be stuck at the HTC logo on startup. You have "gold" in your hands and you don't know it.
lund123 said:
Have looked around but cannot find a stock Cingular HTC Titan (Eternity ?) rom. Previous thread hosted by Football is defunct.
Can anyone please point me to Stock Singular HTC Titan rom?
I am trying to uninstall HSPL ( I am at the dreaded 2.5 SPL, ATT Titan 1) and need this stock rom to try to revert back to 1.0 SPL.
For my ATT HTC Titan I, I debranded, SPL, HSPL and it says HSPL is there on the Phone's SPL screen - but I cannot use any custom rom that uses Radio 17. Only radio 16 works.
Thanks
Click to expand...
Click to collapse
Please no, why?
You are one of the few with the ATT Titan's to have HSPL on there.
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
lund123 said:
BTW, anyone see any issues with the SPL screen above?
I am unable to run any rom that needs radio 17.
Click to expand...
Click to collapse
That is because you need to flash radio 17 after you flash the rom
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
locky you, have hspl 2.5, if you want change my divece for your divece....... what you said? :angel:
Guys, I have tried the roms listed here on this site that also have the associated radio files as well But everytime I install a custom ROM, with the radio 17, my phone stops at th e HTC logo and never moves from it.
Also, I cannot update the SPL 2.6 from HTC now - it always stays at SPL 2.5
My only need is to unlock my phone so that I do not have to keep enterting the unlock code everytime the phone restarts. I have bought the unlock code from ebay and it does work, but have to keep entering it after every boot cycle.
I found the cingular Eternity 1.0 ROM, installed it - but the SPL continues to remain @ SPL 2.5 with the HSPL info as is on the SPL screen.
lund123 said:
Guys, I have tried the roms listed here on this site that also have the associated radio files as well But everytime I install a custom ROM, with the radio 17, my phone stops at th e HTC logo and never moves from it.
Also, I cannot update the SPL 2.6 from HTC now - it always stays at SPL 2.5
My only need is to unlock my phone so that I do not have to keep enterting the unlock code everytime the phone restarts. I have bought the unlock code from ebay and it does work, but have to keep entering it after every boot cycle.
I found the cingular Eternity 1.0 ROM, installed it - but the SPL continues to remain @ SPL 2.5 with the HSPL info as is on the SPL screen.
Click to expand...
Click to collapse
"Lund123" I need you to listen to me for a moment...if your device is stuck at the HTC logo on startup, your radio is incompatible with the ROM on the device. If you have already flashed the custom ROM and it requires you flash the radio it will be with the entire package you downloaded. I use Eburon 2.1; the radio and ROM are separate and both must be flashed from bootloader mode. To use Eburon you must flash the radio that comes with it. Your device is HSPL; it needs no further tinkering with. The custom ROMs can be flashed at will. One warning, a return to official stock ROMs will likely re-lock your phone. The goal of these threads are to achieve what you apparently don't realize; you are HSPL. It is not automatic for many of us to achieve this; HSPL opens your device in a way that can only be described a dream. You're lucky! Flash the radio separately from the bootloader; it's no different than flashing the ROM. In regards to having to re-enter a code; it appears your device may not be subsidy (carrier) unlocked or there is a security lock put on the device which it will ask before it launches the OS. That may require you running what a few of us in the old days did with our HD2s and Rhodiums...perform a task 29, but you may need a deeper "wipe" something akin to a low-level format on a PC.
"berrywr": I get that HSPL is already on the phone, and I am grateful for that. But I believe, I have loaded both the custom rom + radio that comes with it with no positive results.
I have tried the Dynamics ROM (as an example) and the Radio that comes with tit. First I flased the ROM uising the bootloader method. Then I repeated the same for the Radio. Same results, stuck on HTC logo. I have used the RUU program that it comes with to load the roms. I even have tried using the GOLDCARD for these roms, but same results. And Yes, I get it that I need to install the rom first and then the radio that comes with the package. Interestingly, my Radio on the SPL screen never changes to Radio 17, it always stayed 16 (like in the image posted on the 2nd message, I have never seen it read Radio 17.xxx).
Thanks
berrywr said:
"Lund123" I need you to listen to me for a moment...if your device is stuck at the HTC logo on startup, your radio is incompatible with the ROM on the device. If you have already flashed the custom ROM and it requires you flash the radio it will be with the entire package you downloaded. I use Eburon 2.1; the radio and ROM are separate and both must be flashed from bootloader mode. To use Eburon you must flash the radio that comes with it. Your device is HSPL; it needs no further tinkering with. The custom ROMs can be flashed at will. One warning, a return to official stock ROMs will likely re-lock your phone. The goal of these threads are to achieve what you apparently don't realize; you are HSPL. It is not automatic for many of us to achieve this; HSPL opens your device in a way that can only be described a dream. You're lucky! Flash the radio separately from the bootloader; it's no different than flashing the ROM. In regards to having to re-enter a code; it appears your device may not be subsidy (carrier) unlocked or there is a security lock put on the device which it will ask before it launches the OS. That may require you running what a few of us in the old days did with our HD2s and Rhodiums...perform a task 29, but you may need a deeper "wipe" something akin to a low-level format on a PC.
Click to expand...
Click to collapse
lund123 said:
"berrywr": I get that HSPL is already on the phone, and I am grateful for that. But I believe, I have loaded both the custom rom + radio that comes with it with no positive results.
I have tried the Dynamics ROM (as an example) and the Radio that comes with tit. First I flased the ROM uising the bootloader method. Then I repeated the same for the Radio. Same results, stuck on HTC logo. I have used the RUU program that it comes with to load the roms. I even have tried using the GOLDCARD for these roms, but same results. And Yes, I get it that I need to install the rom first and then the radio that comes with the package. Interestingly, my Radio on the SPL screen never changes to Radio 17, it always stayed 16 (like in the image posted on the 2nd message, I have never seen it read Radio 17.xxx).
Thanks
Click to expand...
Click to collapse
It's possible you have the radio glitch where the radio does not change after flashing. Have you tried searching the Titan thread, to see if anybody else has mentioned the problem? I know I swear I've seen this happen to other users...I will do a search tonight to see if I can find anything.
I have looked around and most of the folks are having trouble getting the HSPL to load, my problem has not been stated elsewhere that I could find. I for some reason have the HSPL but I cannot do the following:
1. Cannot use the HSPL program to revert back (uninstall HSPL). When I tried to install OSPL from within the program it errors out.
2. If I install any other radio than 16, it does not take affect - the update goes successfuly, but the SPL screen shows radio 16
3. I cannot install the SPL 2.6 from HTC - it does not take affect. The SPL screen still shows 2.5. Since I cannot have SPL 2.6, I am unable to get some OS updates.
Will keep looking. RUU and goldcard programs - both working properly but result in same outcomes.
xconomicron said:
It's possible you have the radio glitch where the radio does not change after flashing. Have you tried searching the Titan thread, to see if anybody else has mentioned the problem? I know I swear I've seen this happen to other users...I will do a search tonight to see if I can find anything.
Click to expand...
Click to collapse
hiii there .. can i find a link to htc titan stock cingular rom or nbh files for debrand ?