It seems no matter what I do I keep getting device not recognized. I have tried installing all the drivers via kies, I have turned on usb debugging, uninstalled stuff on the pc. I just can not get this to work, I am using the cable that came with the device and have tried different ports.
It look's like I might be having this issue with windows 7 as well. I am now at least getting it to some times show up in device manager. Currentley when I set it to PTP it pops up as a MTP USB Device but has the error symbol. If I do MTP it shows up as SAMSUNG Mobile USB Composite Device with the error.
For people with windows 8: Once you have the driver downloaded, right click on the file and go to properties. Go to the compatibility tab. Put a check next to run this program in compatibility mode. Choose Windows 7 from the drop down window. This should allow you to install the drivers. Kies never recognized my device, but Odin did. I am now rooted. Good luck! Let me know if you have any questions.
I have a little different problem (also windows 8).
This is a custom built desktop tower that i did a clean win8 install on and it doesnt respond at all when I plug in my N2. Absolutely NOTHING happens, although it works just fine plugged into my wifes LT with windows 8 and I didnt even install any drivers in it.
This same tower works just fine with my two galaxy 3s.
mentalcase87 said:
It look's like I might be having this issue with windows 7 as well. I am now at least getting it to some times show up in device manager. Currentley when I set it to PTP it pops up as a MTP USB Device but has the error symbol. If I do MTP it shows up as SAMSUNG Mobile USB Composite Device with the error.
Click to expand...
Click to collapse
Where can you find the driver? All I can find is using keis to install drivers. If you go to the site it only has a pdf
usb driver
http://www.mediafire.com/?4y1a2opm8o3ihfx
I have Windows 8 Pro x64 (clean installed) on a custom built tower, and haven't had a single issue using ODIN to flash beans rom, or any problems mounting the device to read/write files. I didn't have to do anything crazy or custom to get it working either.. just installed the drivers in the thread about rooting the phone originally with ODIN.
apols said:
I have Windows 8 Pro x64 (clean installed) on a custom built tower, and haven't had a single issue using ODIN to flash beans rom, or any problems mounting the device to read/write files. I didn't have to do anything crazy or custom to get it working either.. just installed the drivers in the thread about rooting the phone originally with ODIN.
Click to expand...
Click to collapse
We are both running with the exact same setup. I built my PC and am using enterprise on the custom build. My laptop at work I am using pro. The drivers provided on the rooting page do nothing for me either. This is so frustrating, and when I had the note 2 on sprint it worked just fine. I am starting to wonder if the issue is the phone.
I had some troubles with my galaxy nexus on win 8 too, with similar rig to yours. I'll see what happens over the weekend when I get my Note set up.
Factory restore fixed the issue.
But still no kies
For anyone having problems, I think this should fix it after the reboot. Let me know.
How to Disable Driver Signature Enforcement in Windows 8:
From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ‘More PC Settings’.
Click ‘General’.
Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
Wait a bit.
Click ‘Troubleshoot’.
Click ‘Advanced Options’
Click ‘Windows Startup Settings’
Click Restart.
Didn't do anything for me :/. My phone doesn't even give me the option to go into other modes to interface with my pc. My windows 8 machine sees the device as Qualcomm CDMA Technologies MSM but says that it is missing drivers. When I try and get it to automatically search for drivers it comes up with nothing even when my system has samsung drivers sitting on it. I have tried it on my Windows 7 machine also and it has had similar results. It's strange because Odin sees my phone. I was able to flash root66 rom on it but after that nothing, I can't even get a factory image back on it, it'll only accept root66.
Try using a USB hub. That worked for me on my Win8 machine. I tried factory reset and it didnt work. I also tried re loading windows and it still didnt work. I plugged into a usb hub and my pc recognized my phone....
Sent from my SCH-I605 using XDA Premium HD app
It's doing the same thing. No dice :/
mentalcase87 said:
It seems no matter what I do I keep getting device not recognized. I have tried installing all the drivers via kies, I have turned on usb debugging, uninstalled stuff on the pc. I just can not get this to work, I am using the cable that came with the device and have tried different ports.
Click to expand...
Click to collapse
It's not an issue of your phone. It's an issue of Window 8. This might work but I can't guarantee you 100%.
You may try to install the drivers in compatibility mode and check if it helps:
a. Right click on setup file.
b. Click on Properties.
c. Click on Compatibility tab.
d. Put a check mark on Run this program in compatibility mode for.
e. Select Windows 7.
f. Put a check mark on Run this program as an administrator under Privilege Level.
I had already done all that. Upon factory restoring it worked without a hitch. I had the same issue on pc's running win7
Related
So I just got an Atrix and im trying to root it, however when I plug it in, after setting USB Mode to None and turning on the USB Debug, ADB drivers fail to install. It shows up in my device manager with a ! ontop of the icon, and windows tells me it cant find a driver. I manually downloaded the drivers but that still didnt help, my phone isnt making a connection of the bridge. Ive wiped everything everything motorola related, reinstalled the drivers manually, reinstalled the ADB driver manually, rebooted about 10 times and now im absolutely stuck.
Has anyone run into this before? Im going to try plugging the phone into my work computer today, but id like to be able to get this working on my home computer. I followed the guide thats available out there that tells you to run the driver installer and delete all the files it shows, and that didnt help either. Im on Windows 7 but i also have a laptop with Ubuntu available, however i couldnt find a rooting guide for linux so im not sure if that will help.
albinojoe said:
So I just got an Atrix and im trying to root it, however when I plug it in, after setting USB Mode to None and turning on the USB Debug, ADB drivers fail to install. It shows up in my device manager with a ! ontop of the icon, and windows tells me it cant find a driver. I manually downloaded the drivers but that still didnt help, my phone isnt making a connection of the bridge. Ive wiped everything everything motorola related, reinstalled the drivers manually, reinstalled the ADB driver manually, rebooted about 10 times and now im absolutely stuck.
Has anyone run into this before? Im going to try plugging the phone into my work computer today, but id like to be able to get this working on my home computer. I followed the guide thats available out there that tells you to run the driver installer and delete all the files it shows, and that didnt help either. Im on Windows 7 but i also have a laptop with Ubuntu available, however i couldnt find a rooting guide for linux so im not sure if that will help.
Click to expand...
Click to collapse
which windows 7 32 or 64?
32 bit.
Tried on 2 different PC's, my home computer and my work computer. ADB driver fails to install on both. Both running windows 7 32bit.
albinojoe said:
32 bit.
Tried on 2 different PC's, my home computer and my work computer. ADB driver fails to install on both. Both running windows 7 32bit.[/Q
try to use the drivers from this thread and see if that works
Click to expand...
Click to collapse
or this site use the motohelper
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
I got it sorted. Installed the ADB driver manually (choosing the regular adb driver NOT the composite driver) and then ran super one click to start the ADB service. Then once the phone was connected, ran aroot and it worked.
albinojoe said:
I got it sorted. Installed the ADB driver manually (choosing the regular adb driver NOT the composite driver) and then ran super one click to start the ADB service. Then once the phone was connected, ran aroot and it worked.
Click to expand...
Click to collapse
glad you got it
So I switched to the energy miui yesterday and it worked for like 20 minutes then wouldn't boot up anymore. for hours I kept getting "usb device not recognized" error then out of nowhere I got it to work and started to use odin to flash back. Well during that time it failed and wouldn't start up for awhile but now I can get it into download mode again but my pc won't recognize my vibrant no matter what I do.
I run win 7 x64 with 2 different cables, 2 vibrants (the other vibrant has zero problems connecting and works every time with my pc) and I've tried different usb ports. I've taken the battery out re plugged the usb several times and even tried installing all my usb hubs and nothing.
What can I do to get my computer to recognize my vibrant so I can fix it?
Usually i get "usb device not recognized" message when some stupid reason samsung drivers stop working. What i do is uninstall them, reboot and then install them again. Give it a try, also make sure you're connected to usb port on back of the computer. You can also try heimdall if odin doesn't recognize your phone. Couple of time that has worked for me also.
Try installing Samsung Kies mini, it will automatically install the drivers so that your device can hopefully be recognized, if that does not work, well just use your other vibrant.
I gave that a try but I cannot seem to get heimdall to even work. I keep getting random errors each time. 3 different ones so far. Is there any other way I can do to force my computer to recognize it? And I have the keis but it hasn't helped either. It just tells me to connect.i don't think it is the drivers when my other vibrant connects just fine without problems
If you were in MIUI, you are a going to need the Nexus S drivers for Odin to recognize your phone. You can get them here:
atinm said:
Q: Where can I get the Nexus S drivers?
A: Download and install the Android SDK here then download "Google USB Driver package, revision 4"
Once downloaded, right click on "Computer", "Manage", "Device Manager", "Nexus S", "Update Driver Software", and point it to wherever you isntalled the SDK.
Click to expand...
Click to collapse
Help mee.
I have bought a s3 that is locked to Orange, need to unlock, but odin does not see the phone in recovery/dl mode.
Odin see the phone in normal mode , but each time i put into start/+vol/home odin see nothing.
I have kies updated.
Thanks
crazydiamond1970 said:
Help mee.
I have bought a s3 that is locked to Orange, need to unlock, but odin does not see the phone in recovery/dl mode.
Odin see the phone in normal mode , but each time i put into start/+vol/home odin see nothing.
I have kies updated.
Thanks
Click to expand...
Click to collapse
I had a similar thing when i was plugged into a usb hub
Was ok when i plugged directly into the pc
Install Samsung Kies to be able your PC to detect your phone via Odin
also check the debugging mode in the developer options
bordikun said:
Install Samsung Kies to be able your PC to detect your phone via Odin
also check the debugging mode in the developer options
Click to expand...
Click to collapse
I have Kies, also tried debugging, i need root to unlock phone
Try to use the latest Odin
Odin v3.04
bordikun said:
Try to use the latest Odin
Odin v3.04
Click to expand...
Click to collapse
I have uninstalled the older Kies, re installed the latest.
I have installed the lastest odin.
Have tried to link up with and without debugging, odin still does not see phone when in recovery mode.
Only time odin see the phone when phone is in normal mode.
Starting to get annoyed now lol, i cant cut my sim to fit phone, untill this is done
I cant see my s2 on odin either, what am i doing wrong ????
1. Reboot PC
2. Ensure KIES is not running and kill any KIES processes in PC task manager.
3. Download mode
4. Connect USB directly to PC port (no hub)
5. Wait for any drivers to instal or load on PC
6. Start Odin in administrator mode
If still no good;
a) Different USB cable
b) Different PC USB port and wait for drivers
Sent from my GT-I9300 using xda premium
Thanks . Seems that I had been pressing volume up not down.
I have another question . I used chainfire Rom to debrand the phone but keis does not recognize . How can I solve this . Could it be because the phone is rooted ?
i am having this problem at the mo, I have tried all of the above, apart from a different pc.
oden worked fine with my galaxy s2
is there any more updates on how to sort this out please?
thanks
ian
I know this is a 7 day old thread, but I feel for you having been in the same situation. Firstly, have you installed the Android SDK? If not then I advise you to do so. Do a search on how to install the SDK. There maybe smaller downloads available with a package of the binaries you need to do some testing i.e. adb. The instructions will elaborate about how to set up your Environment settings in Windows. Essentially ADB needs to be called from within any part of your Windows system....or else you will have to cd to its location each and every time you want to do something like this. So once you have done that, open command prompt and type adb and see what comes up? If it says bad command or file name it means your environment settings for the ASK are incorrect, if it displays the adb help text in command prompt you are ready to proceed.
When you plug your device in (not in DL or recovery modes) is it detected by the PC? If so then your drivers are probably fine. If not then it maybe 1 of 2 things? 1 the device is detected but the MTP drivers have not been loaded or 2. No detection what so ever and all drivers need to be installed.
To determine how to proceed you will need to do a bit of investigating.
Note the USB drivers are included as part of the Android SDK.
Check in Device manager inside of Windows to see if anything is detected when you plug it in. If so but it has a yellow exclamation ! then it would indicate you need to update your drivers (but not always?). From here you can test to see if the phone is detected and you only need MTP drivers.
If not then I would suggest uninstalling Keis all together and downloading and installing the Samsung USB drivers separately. Install the drivers. Plug in the phone. If it is not detected straight away, then reboot the PC then plug the phone into a different USB port. From here you can determine how to proceed by using adb.
plug your phone in via USB and open command prompt and type this: adb devices
You should see 1 of 2 things.
1) The words "list of devices attached" followed by a 16 digit long ID number a gap and the word "device"
2) just the words "list of devices attached" and then blank and nothing else?
If a device ID is returned then you can proceed with the following. Otherwise you need to do some additional trouble shooting
Proceed here:
Once it is detected by Windows and shows up in Explorer then unplug the phone and go into settings and developer options and check enable USB debugging. Once you have done this it should allow your device to be seen in DL and recovery modes.
Troubleshoot: If not detected try the following:
1) Reboot the PC and plug into a new USB port that you have not previously plugged into.
2) Try disabling USB debugging plugging the device in and then unplugging it and reenabling USB debugging
3) From the status bar try switching modes between MTP and PTP modes. Wait a good minute or so between to allow Windows to detect the driver change. Tip a good indication is your notification tray Icon with green USB disk with a magnifying glass swirling around....Note if you cannot see this at all you probably should drag it into the notification panel so that you CAN!
4) Open up device manager again and ensure no yellow exclamation marks !
Once all this is right and you can get List of devices attached followed by an ID number then you can for sure be able to detect your device from Odin. Make sure you are running Odin 3.04, run it as admin (not necessary but have heard that it helps?)
Good luck
James
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
have you tried factory resetting the phone?
afasayan said:
have you tried factory resetting the phone?
Click to expand...
Click to collapse
Several times
rekamyenom said:
Several times
Click to expand...
Click to collapse
You can try with minimal/no drivers i.e. uninstall kies if you have it and delete the drivers you might have installed on your own-it sounds counter productive but it has worked for me a few times.
You can also try to either install kies or the drivers separately.
Try the forum for your own phone, the people there might know better about this problem.
Also what OS are you on?
afasayan said:
You can try with minimal/no drivers i.e. uninstall kies if you have it and delete the drivers you might have installed on your own-it sounds counter productive but it has worked for me a few times.
You can also try to either install kies or the drivers separately.
Try the forum for your own phone, the people there might know better about this problem.
Also what OS are you on?
Click to expand...
Click to collapse
I will give all that a try. I'm on 4.4.2 build NH3. That's why I need Odin, to get back to build NE3
rekamyenom said:
I will give all that a try. I'm on 4.4.2 build NH3. That's why I need Odin, to get back to build NE3
Click to expand...
Click to collapse
By OS I meant the computer's OS.
afasayan said:
By OS I meant the computer's OS.
Click to expand...
Click to collapse
I have tried several computers using Windows 7 and Windows XP both 32 and 64
Okay, so I just updated my computer to Windows 8 and cant figure out how to connect my phone to the computer. I would like to access my interior and exterior card thru my computer but when I connect it with the usb nothing seems to happen. A small screen will pop up saying it is installing the device, but then it just finishes installing and still does not recognize the device is connected at all. Do I need to install any certain programs on my comp? I'm running ThunderBolt Rom v5 - 4.1.2..
Any help would be greatly appreciated!
Try connecting it in Download mode and let it install drivers, then remove ur phone, reboot phone and retry connection.
Sent from my SGH-I777 using xda premium
Tried it. Still no luck. Its connected but only charges. Comp still doesn't recognize it. I think Samsung needs to release drivers that are compatible with Windows 8. Are there none out there as of yet?
When I was running the win8 preview once I plugged in my phone it installed the drivers make sure you're connected to the Internet. I can't say if the final win8 is the same. Another way to get the drivers would be the Android sdk package but that is a lot more in depth.... GL
Sent from my Nexus 7 using xda app-developers app
I'm running the Windows 8 Enterprise Evaluation and am able to connect in both MTP and USB mode. Maybe you could also try installing the USB drivers from Samsung's website. They are for Windows 7, but should work for Win 8. You could probably try installing Kies as well, run it and connect the phone and see what happens. Also, try changing the connection mode if the rom supports it.
I plug my phone into a USB port.
The first time I did so, an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
The LG United Drivers are installed onto my computer great.
But then an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
My computer attempts to install MTP USB Driver, but fails. According to Windows, the device is unplugged.
The AutoPlay window reappears. Repeat from the beginning of the paragraph.
What have I done to deserve such trouble, LG?!?!
Apparently the drivers installed directly from phone are not enough. In any case, I was observing similar behaviour *until* I installed LG PC Suite (which you should have been prompted to do too). It's stupid, it sucks but again, it's LG.
Install the LG drivers first. After that, when you plug your phone, it will be recognised as an mtp device.
Have you got Windows Media Player installed?
hmskrecik said:
Apparently the drivers installed directly from phone are not enough. In any case, I was observing similar behaviour *until* I installed LG PC Suite (which you should have been prompted to do too). It's stupid, it sucks but again, it's LG.
Click to expand...
Click to collapse
I forgot to mention I installed LG PC Suite as well. Same problems.
Greenpeace22 said:
Install the LG drivers first. After that, when you plug your phone, it will be recognised as an mtp device.
Click to expand...
Click to collapse
I tried two different versions of the LG United Mobile Driver, versions 3.7.2 and 3.8.1 on my computer. Same problems.
artas182x said:
Have you got Windows Media Player installed?
Click to expand...
Click to collapse
I do. Same problems.
Plug the phone, go to device manager in windows and uninstall the driver for the phone( or whatever shows up with the yellow triangle). Then unplug the phone and connect it back again. It should work. If not, uninstall the lg drivers and clean every trace of them and start from the begining.
Greenpeace22 said:
Plug the phone, go to device manager in windows and uninstall the driver for the phone( or whatever shows up with the yellow triangle). Then unplug the phone and connect it back again. It should work. If not, uninstall the lg drivers and clean every trace of them and start from the begining.
Click to expand...
Click to collapse
Tried uninstalling the LG U2 USB Driver, then disconnected and reconnected phone. Same problem. LG U2 USB Driver was installed but MTP USB still shows up as unplugged.
Then uninstalled LG PC Suite and LG United Mobile Driver, reinstalled LG PC Suite and reconnected phone. Problem still occurs. I run LGAutoRun.exe and United Mobile Drivers are installed. Same problem. MTP USB shows up as "device unplugged" and phone keeps disconnecting and reconnecting to computer, saying drivers were not properly installed due to MTP USB being unplugged.
Interesting to note the phone is listed as a CD-ROM drive.
optimusl9 said:
Tried uninstalling the LG U2 USB Driver, then disconnected and reconnected phone. Same problem. LG U2 USB Driver was installed but MTP USB still shows up as unplugged.
Then uninstalled LG PC Suite and LG United Mobile Driver, reinstalled LG PC Suite and reconnected phone. Problem still occurs. I run LGAutoRun.exe and United Mobile Drivers are installed. Same problem. MTP USB shows up as "device unplugged" and phone keeps disconnecting and reconnecting to computer, saying drivers were not properly installed due to MTP USB being unplugged.
Interesting to note the phone is listed as a CD-ROM drive.
Click to expand...
Click to collapse
Install the software from the CD image. It will load the correct driver. After this re-connect the device and the CD image will show up for a few seconds and disappear. After this the storage will show up. That is how it worked on my device.
kevev said:
Install the software from the CD image. It will load the correct driver. After this re-connect the device and the CD image will show up for a few seconds and disappear. After this the storage will show up. That is how it worked on my device.
Click to expand...
Click to collapse
I have already tried what you said as I posted before. The LG United Mobile driver gets installed but the MTP USB Driver does not get installed due to the device being unplugged according to Windows, even though I have yet to disconnect the phone from the computer. The phone still says "Connected as an installer".
The phone is recognized as an F: Drive by Windows but LGE Mobile but keeps disconnecting and reconnecting every 20 seconds or so.
I am going to have to upload a video to YouTube to make things crystal clear.
optimusl9 said:
I have already tried what you said as I posted before. The LG United Mobile driver gets installed but the MTP USB Driver does not get installed due to the device being unplugged according to Windows, even though I have yet to disconnect the phone from the computer. The phone still says "Connected as an installer".
The phone is recognized as an F: Drive by Windows but LGE Mobile but keeps disconnecting and reconnecting every 20 seconds or so.
I am going to have to upload a video to YouTube to make things crystal clear.
Click to expand...
Click to collapse
Try a different USB port or cable. My P769 would not work on my USB 3 ports, but was happy on the USB 2 port. I had already installed the drivers and LG PC Suite and it picked up each mode just fine.
Plugging the phone into USB 2.0 makes the phone show up in portable devices, but LG Suite fails to identify the phone. I tried using both LGE Android Net MTP USB Device and MTP USB Device but they both fail. I have LG United Drivers and LG Suite installed already.
got thesame problem here mate..i search all over here and google the driver but still cant find any solution..this is so frustrating to fix this issue,,got install and uninstall the pc suite and driver many times but still cant get the solution..so what could be the fix????
no one can suggest..someone told me that maybe its causing the broken data cable but i have 3 cables now..
everytime i intend to install the MTP driver thing my pc always failed to do so,,saying that the filename,directory name or syntax label is incorrect..but i manually direct the search to lg driver folder but same error occurs..or there still other alternative apps that can transfer files without removing my sd to my phone,or atleast transfer files over the wifi..??
Any fix for this one? Already tried uninstalling, installing LG drivers, removed and reinserted SD card and everything. But still to no avail. It installs everything successfully EXCEPT USB MTP device which is the one I needed the most. Any solutions? Thanks!
Futurust said:
Any fix for this one? Already tried uninstalling, installing LG drivers, removed and reinserted SD card and everything. But still to no avail. It installs everything successfully EXCEPT USB MTP device which is the one I needed the most. Any solutions? Thanks!
Click to expand...
Click to collapse
You must be on 64 bit windows. Not even on 64bit, Still try this...
1) Uninstall LG Drivers, LG PC Suite and anything you see named LG. Restart PC.
2) Install latest LG Driver from this post (step 4)
3) Install Optional MTP Driver from this post (step 4)
4) Open Windows Device Manager (just to watch whats happening.)
5) Disconnect Internet (To avoid stupid online WDM drivers)
6) Connect phone with Usb and let drivers install automatically. Give it some time to install drivers keeping watch on Device Manager window.
7) Keep changing USB connect modes to all modes one-by-one on Phone and let drivers install.
You should see MTP drivers installed now. If this does not help, cant think of anything else. If this works, press THANKS button
EDIT: Connect USB at backside of pc, directly to USB on pc motherboard.
cmahendra said:
You must be on 64 bit windows. Not even on 64bit, Still try this...
1) Uninstall LG Drivers, LG PC Suite and anything you see named LG. Restart PC.
2) Install latest LG Driver from this post (step 4)
3) Install Optional MTP Driver from this post (step 4)
4) Open Windows Device Manager (just to watch whats happening.)
5) Disconnect Internet (To avoid stupid online WDM drivers)
6) Connect phone with Usb and let drivers install automatically. Give it some time to install drivers keeping watch on Device Manager window.
7) Keep changing USB connect modes to all modes one-by-one on Phone and let drivers install.
You should see MTP drivers installed now. If this does not help, cant think of anything else. If this works, press THANKS button
EDIT: Connect USB at backside of pc, directly to USB on pc motherboard.
Click to expand...
Click to collapse
Thanks for taking the time to answer me mate. Already tried literally everything on what you just said above. Still no. I tried it on my brother's old vista laptop. One connect and it worked instantly! Lol.
Sent from my LG-P768 using Tapatalk 2
optimusl9 said:
I plug my phone into a USB port.
The first time I did so, an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
The LG United Drivers are installed onto my computer great.
But then an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
My computer attempts to install MTP USB Driver, but fails. According to Windows, the device is unplugged.
The AutoPlay window reappears. Repeat from the beginning of the paragraph.
What have I done to deserve such trouble, LG?!?!
Click to expand...
Click to collapse
This may help - credit goes to levicki where I found this article. I was having problems with my Garmin Satnav
I can't post urls as I am a newbie member, so google this phrase mtp usb device failed device unplugged
and look for this result - near the end of page 1 on my search
HOWTO: Fix MTP USB driver problem in Windows 7 - Tips - Levicki's ...
If you are running on windows xp you need to install windows media player 10 or later
Sent from my LG-P768 using xda app-developers app
tried this method, still no go, tried almost everything on the web, mtp drivers fail to install
running win7 x64
solved mt htc one mtp problem
fazq01 said:
This may help - credit goes to levicki where I found this article. I was having problems with my Garmin Satnav
I can't post urls as I am a newbie member, so google this phrase mtp usb device failed device unplugged
and look for this result - near the end of page 1 on my search
HOWTO: Fix MTP USB driver problem in Windows 7 - Tips - Levicki's ...
Click to expand...
Click to collapse
This one helped me to solve my problem ,, just deleted this file and tried it worked. C:\WINDOWS\INF\wpdmtp.inf
THANKS
optimusl9 said:
I plug my phone into a USB port.
The first time I did so, an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
The LG United Drivers are installed onto my computer great.
But then an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
My computer attempts to install MTP USB Driver, but fails. According to Windows, the device is unplugged.
The AutoPlay window reappears. Repeat from the beginning of the paragraph.
What have I done to deserve such trouble, LG?!?!
Click to expand...
Click to collapse
This works on XP x86
Need:
1. LG USB cable that came with the phone,
2. Media Player 10/11 preinstalled,
3. your LG Driver,
3. LG Phone,
4. and Media Transfer Protocol Porting Kit (mtppk12.exe)
1. with phone disconnected install Media Transfer Protocol Porting Kit
2. when asked to restart the PC, go ahead and restart
3. open device manager, connect phone to PC
4. install driver and watch LGE Android MTP disappear
5. be sure to toggle between Charge and MTP on the phone to install all drivers
this also works for HTC MTP