I Just bought the new Fujitsu Arrows F-04E running android 4.0.4.
For now, there is nothing I could find on how to root it. I already tried the method of Bin4ry (Root MANY ANDROID) but didn't work. I'm now actively searching on Japanese sites, but nothing so far. If by chance someone in this community has some useful information that can help, please don't hesitate to share them. I will also share what I find, if any.
Thanks and hope we can figure the way to do it !
Cheers
The same with this enquire. If anybody enable to root and upgrade new Rom for F-04E, can u pls share for us? Thanks
luyenlt said:
The same with this enquire. If anybody enable to root and upgrade new Rom for F-04E, can u pls share for us? Thanks
Click to expand...
Click to collapse
More : If any one known the way to unlock !
phankhang said:
More : If any one known the way to unlock !
Click to expand...
Click to collapse
Please help if there are any solution . Thank all
root
1. Setup USB drivers on PC
2. Plug in Fujitsu Arrows V F-04E to PC (USB-debugging on)
3. Run root\runme.bat
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
did you got this resolved? USB debugging enabled on your device? did you install the driver correctly first?
m_ghv_geo said:
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
Click to expand...
Click to collapse
Your phone is F-02E. The root tool for F-04E
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
m_ghv_geo said:
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
Click to expand...
Click to collapse
greatslon said:
1. Setup USB drivers on PC
2. Plug in Fujitsu Arrows V F-04E to PC (USB-debugging on)
3. Run root\runme.bat
Click to expand...
Click to collapse
You tried already, and is it successful rooted for F-04E?
Robiche said:
I Just bought the new Fujitsu Arrows F-04E running android 4.0.4.
For now, there is nothing I could find on how to root it. I already tried the method of Bin4ry (Root MANY ANDROID) but didn't work. I'm now actively searching on Japanese sites, but nothing so far. If by chance someone in this community has some useful information that can help, please don't hesitate to share them. I will also share what I find, if any.
Thanks and hope we can figure the way to do it !
Cheers
Click to expand...
Click to collapse
Hi bro,
Fujitsu F-04E rooted full
Pls checking some pictures below in attachment
If any support, feel free to contact me via YM: lethanhluyen
Hi,
I'm a noob at this stuff. I'm trying to root my f-04E. I've downloaded the two zip files, but I don't know how to install the usb drivers. I've tried installing them onto my SDK manager and still nothing happens. I've tried the runme option in the root file, but it says that my device is not detected. Any help would be awesome.
Phangtonpower said:
Hi,
I'm a noob at this stuff. I'm trying to root my f-04E. I've downloaded the two zip files, but I don't know how to install the usb drivers. I've tried installing them onto my SDK manager and still nothing happens. I've tried the runme option in the root file, but it says that my device is not detected. Any help would be awesome.
Click to expand...
Click to collapse
pls contact me for details
luyenlt said:
pls contact me for details
Click to expand...
Click to collapse
Actually I did send you a PM on here. Please check your in box
Is there anyone else with any ideas?
That we can have it posted here and have it documented for others to reference in the future.
Weekend bump.
About to call this one a lost cause bump
Thank you, was able to root no problem on the first try.
Although I did use generic google drivers. Sorry would link where I got them but cannot remember.
*update
Also wanted to mention that I have a EM01f, emobiles equivalent of this device.
*Update
though i was able to install superuser and passed rootchecker test i found I couldnt do a lot of things. So I downloaded the newest version of superuser renamed it to superuser.apk replaced the one in the zip and reran it. Works perfect, so far. Thanks again!
Hello to everyone I had an issue that was my phone restarts during calls and randomly, I just follow the root guide to eliminate all docomo bloatware
I root the phone successful but three days after a lot of app showed errors and restarts
When I restart phone the phone show three errors that are:
Com. Android. Phone process was closed and the Hceviewermaganer process has stopped and that situation is always on start
My phone doesn't work because this apps doesn't permit access to phone menu
Version of my phone is V16R
Question how I can try to reinstall original software, anyone has the recovery files to be uploaded through the recovery
Or any method to access through a Pc
Regards
Sent from my GT-I9300 using xda app-developers app
moku160 said:
Thank you, was able to root no problem on the first try.
Although I did use generic google drivers. Sorry would link where I got them but cannot remember.
*update
Also wanted to mention that I have a EM01f, emobiles equivalent of this device.
Click to expand...
Click to collapse
Hello !
I also have a EM-01F but I've the same problem as mentioned before. SuperUser icon is correctly installed on the device but when it's launched, an error pops to say me it can't install su access...
Which drivers have you used are what root program have you launched ?
Guigui_18892 said:
Hello !
I also have a EM-01F but I've the same problem as mentioned before. SuperUser icon is correctly installed on the device but when it's launched, an error pops to say me it can't install su access...
Which drivers have you used are what root program have you launched ?
Click to expand...
Click to collapse
check out my follow up post. I had to redo it, replacing the given superuser.apk without a newer version. THen it seemed to work correctly.
Related
I have Frankensteined some scripts and binaries together with some bash programming and created a linux script that will sticky root and/or overclock your evo 3d.
Just trying to give back to the community.
Hope that all of you linux/MAC users like it...
BTW the defaults for overclocking are 33 for the multiplier and 1375000 for the voltage.
P.S. you have to have adb in your $PATH
Version 1.2 is up and should fix ubuntu and mac issues. Please test and if it works for you press thanks.
Thanks
l33tlinuxh4x0r
Got error:
rootme: 14: Syntax error: "(" unexpected
I'm on Ubuntu 11.04 64bit
vboyz103 said:
Got error:
rootme: 14: Syntax error: "(" unexpected
I'm on Ubuntu 11.04 64bit
Click to expand...
Click to collapse
does Jermey's script work for you?
l33tlinuxh4x0r said:
does Jermey's script work for you?
Click to expand...
Click to collapse
Nope, I tried his as well and didn't work, same error.
vboyz103 said:
Nope, I tried his as well and didn't work, same error.
Click to expand...
Click to collapse
must be something to do with the version of linux that you are running or maybe an enviroment variable that you have set.
Are you using bash or another shell?
simple solution to fix these scripts if you are having that issue
is to open the script in a txt editor and remove every instance of the word "function" from the script.
I added the attached file with it done.
Note: Remove ".txt" from the file and replace it with the other one.
I belive you are missing the command to push the kernel to the tmp folder
tigereyeslalo said:
I belive you are missing the command to push the kernel to the tmp folder
Click to expand...
Click to collapse
You are absolutly right sorry about that... I have attached an updated zip. This should also fix the ubuntu issues with the function command.
mine seems to hang when I do this now.
---------- Running Fre3vo please wait ----------
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
I've used J.ermey's script without any issues.
using on mac
after I hit control-C, seems like it runs through everything.
------------ Setting up directories ------------
--------- Installing su,busybox,sqlite ---------
3430 KB/s (1448982 bytes in 0.412s)
2684 KB/s (22228 bytes in 0.008s)
4633 KB/s (1120536 bytes in 0.236s)
------------- Installing Superuser -------------
5287 KB/s (398990 bytes in 0.073s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
------------------------------------------------
I can get the root shell via adb. But nothing requiring root works on the phone.
I've tried rebooting the phone multiple times
lmbebo said:
mine seems to hang when I do this now.
---------- Running Fre3vo please wait ----------
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
I've used J.ermey's script without any issues.
using on mac
after I hit control-C, seems like it runs through everything.
------------ Setting up directories ------------
--------- Installing su,busybox,sqlite ---------
3430 KB/s (1448982 bytes in 0.412s)
2684 KB/s (22228 bytes in 0.008s)
4633 KB/s (1120536 bytes in 0.236s)
------------- Installing Superuser -------------
5287 KB/s (398990 bytes in 0.073s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
------------------------------------------------
I can get the root shell via adb. But nothing requiring root works on the phone.
I've tried rebooting the phone multiple times
Click to expand...
Click to collapse
It looks like you are killing the fre3vo script which explains why you aren't getting root.
not sure why it doesn't work on mac... I know that macs are unix and this script is mostly copied from J.eremy so if his works so should mine but it is intended for linux not mac so maybe that is why it doesn't work not sure though.
I left the script running for 10 mins which is why I'm killing it. It was just hanging.
On J.ermey's script, it was over very quick.
lmbebo said:
I left the script running for 10 mins which is why I'm killing it. It was just hanging.
On J.ermey's script, it was over very quick.
Click to expand...
Click to collapse
I think that I found the issue... I had "" around the adb command and mac apparently didn't like it... Fixed now should work on mac and linux flawlessly
Check first post for latest version (1.2)
aha! many thanks!
it works now. As does Titanium backup (which I was unable to get to work on other scripts)
How do i run this on a mac? Not sure where to begin.....
Please help. Thanks
Getting error when overclocking.
TURN OFF DISPLAY AND LEAVE IT OFF UNTIL SCRIPT COMPLETES!
Press any key when screen is off...
What multiplier would you like to use to overclock? (press enter for default)
What voltage would you like to use to overclock? (press enter for default)
Overclocking now... (use setcpu to adjust clock speeds)
1173 KB/s (5832 bytes in 0.004s)
insmod: can't insert '/data/local/tmp/8x60_oc.ko': invalid module format
Complete, Press ENTER to go back
k wizzle said:
Getting error when overclocking.
TURN OFF DISPLAY AND LEAVE IT OFF UNTIL SCRIPT COMPLETES!
Press any key when screen is off...
What multiplier would you like to use to overclock? (press enter for default)
What voltage would you like to use to overclock? (press enter for default)
Overclocking now... (use setcpu to adjust clock speeds)
1173 KB/s (5832 bytes in 0.004s)
insmod: can't insert '/data/local/tmp/8x60_oc.ko': invalid module format
Complete, Press ENTER to go back
Click to expand...
Click to collapse
this is not a problem with the script... it has to do with the version of the kernel that you have... the sensation and pre ota evo 3d's need a different kernel module... you can find the different modules here http://forum.xda-developers.com/showthread.php?t=1158951
This tool will root your device based on the debugfs root method developed by miloj.
Just download and unzip everything into a directory; then run RootDebugfs.bat from that directory (if you do not currently have the device drivers for your transformer, they are attached to this post, please install them, please use them to install your device before attempting the process).
Neither ADB nor the SDK need to be installed as all needed files are included in the attachments below (though it won't hurt anything if they are).
Helpful tip:
Make sure no other Android device is connected to your PC
It should look familiar since I took PrimeTime and gutted it, only keeping the menu options. Thanks to viperboy for that.
Original post is in the TF300 thread, http://forum.xda-developers.com/showthread.php?t=1704209
UPDATE 6/12/2012:
v1.1 - Added donation link for miloj
v1.2 - Fixed bug that caused it to stop while doing "debugfs", to cancel press Ctrl+c
v1.3 - Fixed bug where the id is not returned from the su test
v1.4 - Fixed bug introduced with v1.3
v1.5 - Fixed bug where you don't have to push the apk before calling install
6/13/2012
v1.6 - Fixed messaging (this is a cosmetic change)
v1.7 - Added a remove call on su prior to rooting for those who had root previously and it not longer works
v1.8 - Change the octal permissions to be 6755 instead of 4755
7/2/2012
v1.9 - Update superuser app and binary to the latest version available
XDA uploads are not working currently so I have uploaded the new version to here for now
https://skydrive.live.com/redir?resid=DC89975E3CE960E5!221
8/5/2012
v2.0 - Updated to include a kill for Asus sync as that seemed to be the biggest issue.
I have also made it more generic so that it can root more devices with the same util. This is done by scanning for the system partition automatically, thanks to rightonred for that suggestion. With the attachment labeled "generic" I have removed all asus references and drivers since they were causing issues with me being able to attach the zip to xda. Anybody who needs the drivers can download them from asus or from another xda post.
v2.1 - Added a pause while waiting for the device to restart to alleviate that nuisance.
v2.2 - Added message to ignore "File not found" message when trying to delete old su versions. Also updated message with the generic locations of settings on the tablet.
8/12/2012
v2.3 - Update su binary file (hopefully it may help some of the people with superuser app issues)
ASUS drivers can be downloaded from the ASUS site but some are not provided other than through the sync install. I have extracted out the drivers from that sync install and attached them to this post. These drivers will support most of the Asus Eee Pad family including TF101, TF201, TF300, TF700, ME171(MeMO), A66(Padfone), SL101(Slider), and a couple others.
No longer need a PadFone specific root util as the generic one should work for it as well.
Here is a version I put together for the Gallexy SII (but the generic one attached here should work fine)
http://forum.xda-developers.com/showpost.php?p=27611187&postcount=3
Latest Supported Versions:
v9.2.1.27 for the TF101 (ICS 4.0.3)
v9.2.2.6 for the TF101G (ICS 4.0.3) (3G version)
v9.4.2.28 for the TF201 (ICS 4.0.3)
v9.4.3.30 for the TF300T (ICS 4.0.3)
v9.4.4.40 for the TF300TG (ICS 4.0.3) (3G version)
v9.4.5.30 for the TF700T (ICS 4.0.3)
v9.18.8.41 for the PadFone (ICS 4.0.3)
These are the latest supported versions as far as I know, if I get any further input I will update this post.
Reported UNsupported Versions
v10.4.2.15 for the TF201 (JB 4.1.1)
v10.4.2.9 for the TF300T (JB 4.1.1)
v10.4.4.16 for the TF700T (JB 4.1.1)
v9.20.1.22 for the PadFone (ICS 4.0.4)
any one confirmed? what's the risk, if it doesnt work?
Currently in progress .... sitting at:
Step 2 - Rooting...
debugfs 1.42 (29-Nov-2011)
debugfs: (shows a flashing cursor)
My Prime has rebooted but still sitting at the above. Is this normal?
OK, now I'm getting nervous .... Anybody wanna help a Noob?
Aaronneal said:
any one confirmed? what's the risk, if it doesnt work?
Click to expand...
Click to collapse
The risk if it doesn't would should just be that you wouldn't have root.
We already have confirmation that the method works (so there should be no risk there). We just don't have confirmation that I didn't make a typo or other mistake when putting it all together.
Gremlin001 said:
Currently in progress .... sitting at:
Step 2 - Rooting...
debugfs 1.42 (29-Nov-2011)
debugfs: (shows a flashing cursor)
My Prime has rebooted but still sitting at the above. Is this normal?
Click to expand...
Click to collapse
How long has it been sitting there?
This is one of the points where I wasn't sure about since I had to pass input to debugfs through adb.
sparkym3 said:
How long has it been sitting there?
This is one of the points where I wasn't sure about since I had to pass input to debugfs through adb.
Click to expand...
Click to collapse
Currently 7 minutes...
If my memory serves me correctly, this is the point where it can take 10 - 15 minutes. Is that correct?
---------- Post added at 01:27 PM ---------- Previous post was at 01:12 PM ----------
Nope ... left it stalled at "debugfs:" for 20 minutes.
Ctrl-C'd out of the batch file. Doesn't seem to have hurt the Prime.
Gremlin001 said:
Currently 7 minutes...
If my memory serves me correctly, this is the point where it can take 10 - 15 minutes. Is that correct?
---------- Post added at 01:27 PM ---------- Previous post was at 01:12 PM ----------
Nope ... left it stalled at "debugfs:" for 20 minutes.
Ctrl-C'd out of the batch file. Doesn't seem to have hurt the Prime.
Click to expand...
Click to collapse
Thats what I was going to tell you. I have an update that I will put up. just forgot to put the absolute location. Please stand by.
Standing by ...
Now?
Now?
How 'bout now??
Maybe now?
Please try again. New version is v1.2
Running the updated bat as I type.... stand by
update #1 - sitting at the same spot.
Is it possible some of the files in the zip need to be in the MS-Win system32 folder?
sparkym3- you have a quick link to the win driver installation tutorial? Gonna try this but haven't used Windows in years. Got a lappy with xp on it.
texstar said:
sparkym3- you have a quick link to the win driver installation tutorial? Gonna try this but haven't used Windows in years. Got a lappy with xp on it.
Click to expand...
Click to collapse
Plug your prime into the computer with the Asus usb cable. When the Autoinstall drivers dialogue pops up, tell it you want to select the drivers. when it asks you to browse to the drivers, browse to the location where you unzipped sparky's and select it. WinXP does the rest.
Gremlin001 said:
Running the updated bat as I type.... stand by
update #1 - sitting at the same spot.
Is it possible some of the files in the zip need to be in the MS-Win system32 folder?
Click to expand...
Click to collapse
Can you tell me what the console displays after these lines. That should tell if all the files got copied over to the device.
adb push debugfs /data/local/
adb push debugfsinput /data/local/
Since debugfs actually runs, at least that one is copied over, my main concern is debugfsinput, this is the file that tells debugfs what to do.
Also, would you post a screenshot so I can see exactly what is happening, something might jump out if I can actually see it.
Screen shot won't do any good. Lettering is very dark. Here is a select all/copy of the output.
Waiting for device to be detected...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Step 1 - Pushing files...
843 KB/s (1862336 bytes in 2.156s)
698 KB/s (22364 bytes in 0.031s)
7 KB/s (119 bytes in 0.015s)
Rebooting...
Step 2 - Rooting...
debugfs 1.42 (29-Nov-2011)
debugfs:
I'm exiting the batch file.
Gremlin001 said:
Screen shot won't do any good. Lettering is very dark. Here is a select all/copy of the output.
Waiting for device to be detected...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Step 1 - Pushing files...
843 KB/s (1862336 bytes in 2.156s)
698 KB/s (22364 bytes in 0.031s)
7 KB/s (119 bytes in 0.015s)
Rebooting...
Step 2 - Rooting...
debugfs 1.42 (29-Nov-2011)
debugfs:
I'm exiting the batch file.
Click to expand...
Click to collapse
Would you just run this line manually and see if you get the same.
adb shell "/data/local/debugfs -w /dev/block/mmcblk0p1 < /data/local/debugfsinput"
I wish I had my prime i could test, all i have with me is an emulator.
On the emulator i get errors, but it still runs the correct commands then exits
C:\Android\android-sdk\platform-tools>adb shell "/data/local/debugfs -w /dev/block/mmcblk0p1 < /data/local/debugfsinput"
debugfs 1.42 (29-Nov-2011)
/dev/block/mtdblock0: Attempt to read block from filesystem resulted in short read while opening filesystem
debugfs: cd: Filesystem not open
debugfs: write: Filesystem not open
debugfs: set_inode_field: Filesystem not open
debugfs: set_inode_field: Filesystem not open
debugfs: set_inode_field: Filesystem not open
debugfs:
C:\Android\android-sdk\platform-tools>
C:\Documents and Settings\kcr\Desktop\Root>adb shell "/data/local/debugfs -w /de
v/block/mmcblk0p1 < /data/local/debugfsinput"
debugfs 1.42 (29-Nov-2011)
debugfs: debugfs: write: The file 'su' already exists
debugfs: debugfs: debugfs: debugfs:
C:\Documents and Settings\kcr\Desktop\Root>
Then it exits to dos shell
---------- Post added at 02:22 PM ---------- Previous post was at 02:14 PM ----------
Gotta run sparky. I'll be back to try again in about 4 hours. Thanks for giving it a go and setting up the bat. It will likely be something simple messing up - it usually is.
Gremlin001 said:
C:\Documents and Settings\kcr\Desktop\Root>adb shell "/data/local/debugfs -w /de
v/block/mmcblk0p1 < /data/local/debugfsinput"
debugfs 1.42 (29-Nov-2011)
debugfs: debugfs: write: The file 'su' already exists
debugfs: debugfs: debugfs: debugfs:
C:\Documents and Settings\kcr\Desktop\Root>
Then it exits to dos shell
Click to expand...
Click to collapse
if the file already exists, then that may be a problem.
you could try this to remove the existing file:
Code:
adb shell
/data/local/debugfs -w /dev/block/mmcblk0p1
rm /xbin/su
quit
exit
This should clear out any current su file that's in there and then try that line again.
Hopefully somebody else can come in and confirm they are seeing the same because I am useless for trying things without my device.
sparkym3 said:
Latest Supported Versions:
v9.4.2.21 for the TF201
v9.2.1.17 for the TF101
v9.4.3.29 for the TF300
These are the latest supported versions as far as I know, if I get any further input I will update this post.
The latest update for TF201 v9.4.2.28/29 due out within a day or 2 has been reported to not have any of the known root exploits, do NOT upgrade to the latest build prior to rooting or you may be out of luck.
Click to expand...
Click to collapse
I'm already out of luck
so i can't even downgrade either, if I wanted to, huh? .28 blues..lol
Ok I'm in if you are still around sparkym3.
Running v1.3 bat gets me to...
Step 2 -- Rooting...
debugfs 1.42
debugfs: Allocated inode: 1369
debugfs: su: File not found by ext2_loopback
debugfs: su: File not found by ext2_loopback
debugfs: su: File not found by ext2_loopback
debugfs:
Rebooting...
Testing superuser...
/system/bin/sh: /system/xbin/su: not found
uid and gid should both be 0.
Are they? (y/n):
I'm stopped here. not sure how to proceed.
Hi everyone,
I have a tablet Sony p with baseband r402, i'm italian but i bought it in usa, android version si 3.2.1 but i can t upgrade to 4.0.1.
The upgrade software return me an error that the tablet can t connect to wifi but the wifi still connect and the stock browser navigate perfectly.
Any solution?
Ps. The tablet si at&t branded
Ps2. Sorry 4 bad english guy
Thx
Thepunisherg4 said:
Hi everyone,
I have a tablet Sony p with baseband r402, i'm italian but i bought it in usa, android version si 3.2.1 but i can t upgrade to 4.0.1.
The upgrade software return me an error that the tablet can t connect to wifi but the wifi still connect and the stock browser navigate perfectly.
Any solution?
Ps. The tablet si at&t branded
Ps2. Sorry 4 bad english guy
Thx
Click to expand...
Click to collapse
First things first, get off that 3.2.1 AT&T crap. See http://forum.xda-developers.com/showpost.php?p=39383023&postcount=263
Then you can update to ICS plus 3G will still work
stifilz said:
First things first, get off that 3.2.1 AT&T crap. See http://forum.xda-developers.com/showpost.php?p=39383023&postcount=263
Then you can update to ICS plus 3G will still work
Click to expand...
Click to collapse
Thx mate, but can t understand the steps i have to do..
I'm a little bit confused!
i complete the steps following:
wipe data\factory in recovery
install abd drivers succesfull
download aio 5.3
enable usb debug on sony tablet p
try to root with aio but return me a lot of errors:
run-as: Package 'com.pwn.me' is unknown
[*] Rebooting device...
[*] Waiting for tablet to reboot...... (~40s)
[*] Attempting to insert fake local.prop entry...
[+] Flooding log...
[*] Rebooting device...
[*] Waiting for tablet to reboot...... (~40s)
[*] Attemping persistence...
remount failed: Operation not permitted
failed to copy 'files\su' to '/system/bin/su': Read-only file system
Unable to chmod /system/bin/su: No such file or directory
failed to copy 'files\tempsu' to '/system/bin/tempsu': Read-only file system
Unable to chmod /system/bin/tempsu: No such file or directory
Unable to chmod /system/bin/tempsu: No such file or directory
failed to copy 'files\busybox' to '/system/xbin/busybox': Read-only file system
Unable to chmod /system/xbin/busybox: No such file or directory
/system/xbin/busybox: not found
failed to copy 'files\Superuser.apk' to '/system/app/Superuser.apk': Read-only f
ile system
[*] Cleaning up...
failed on '/data/data/com.android.providers.media/lib.bak' - No such file or dir
ectory
[*] Rebooting...... (~35s)
[*] MTP driver has been enabled back.
[*] Exploit complete!
[*] Press any key to continue.
the root process stops but there isn't any sign of the root.
i try to change region but it tells me that NEED ROOT to procede
any idea?
please help me, thx
I messed up but I fixed it, mostly. I picked up a note two from Verizon hardware version I605.06 but coming from the Nexus I quickly tired of touchwiz and longed for the halcyon days of CyanogenMod. I ended up using heimdall to root and install Recovery but forgot that the bootloader was still locked, so soft bricked it. Tried restoring to stock using Odin but could not use Official VRALJB4.1.1 since it would fail at sbin. After figuring out that this had something to do with the bootloader I used the the alternate restore file and my phone worked again. So I started over using Casual and was able to get root again but apparently my bootloader is no longer stock and so it tells me to get off the internets. I was able to flash root66 but can’t for the life of me figure out how to unlock the bootloader.
Android Version: 4.1.1
Baseband Version: I605VRALJB
Kernel Version: 3.0.31-414933
[email protected]#1
SMP PREEMPT Sun Oct 28 13:34:23 KST2012
Build Number: JRO03C.I605VRALJB
Hardware Version: I605.06
Edit: I also have stock recovery already installed.
Really?
Is this question too hard or too stupid?
Additional Info
The first time I run casual after reboot it tells me I don't have root and need to get root. The second time I run casual it gives me this.
mkdir failed for /data/local/tmp, File exists
Pushing dependencies
Pushing su binary...
7484 KB/s (91980 bytes in 0.012s)Pushing SuperSU app...
7429 KB/s (996704 bytes in 0.131s)Pushing Exynos-Abuse exploit
6984 KB/s (64373 bytes in 0.009s)Pushing root script
352 KB/s (361 bytes in 0.001s)Pushing Busybox
7068 KB/s (1867568 bytes in 0.258s)Pushing viewmem
2645 KB/s (5417 bytes in 0.002s)Pushing raw exploit code
54 KB/s (56 bytes in 0.001s)Setting Permissions....
Executing Root Exploit.
[*] s_show->seq_printf format string found at: 0xC086C348
[*] sys_setresuid found at 0xC00967C4
[*] patching sys_setresuid at 0xC0096808
remounting system rw....
moving su into position
moving Superuser.apk into position
Your device should be rooted. If you have upgraded past VRALJB firmware the exploit may not function properly.
CASUAL requires a reboot because we look at the memory logs after the device boots to verify proper bootloader version.
rebooting...
[x]Ready for exploit
[x]Found rooted device
[INFO] Reading 512 bytes at 0x40000200...
HellNo
IMPROPER BOOTLOADER VERSION DETECTED. FOLLOW DIRECTIONS NOOB! GUYS LIKE YOU ARE THE REASON DEVELOPERS HAVE SO MUCH PROBLEMS!!!!!! DO YOU REALIZE WHAT IT TAKES TO MAKE SOMETHING LIKE THIS COME TOGETHER?? AND HERE YOU ARE JUST TRYING TO SCREW THINGS UP.... DAMNIT! GET OFF THE INTERNET!
Here's your answer. Use the correct unlock method. That's the old version which doesn't work anymore m you need the one labeled jail break
Sent from my SGH-T889 using xda app-developers app
You were right.
kintwofan said:
Here's your answer. Use the correct unlock method. That's the old version which doesn't work anymore m you need the one labeled jail break
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
As promised, first born son will be air shipped later today, will post back with tracking information.
bazbazbaz said:
As promised, first born son will be air shipped later today, will post back with tracking information.
Click to expand...
Click to collapse
Cool, I will post when received!
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Cool, I will post when received!
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Ive tried all the methods with no luck, the casual alsways fails at the end after downloading the pit file, i tried 4 computers, 5 USB cords and 40+ usb ports.
bazbazbaz said:
The first time I run casual after reboot it tells me I don't have root and need to get root. The second time I run casual it gives me this.
mkdir failed for /data/local/tmp, File exists
Pushing dependencies
Pushing su binary...
7484 KB/s (91980 bytes in 0.012s)Pushing SuperSU app...
7429 KB/s (996704 bytes in 0.131s)Pushing Exynos-Abuse exploit
6984 KB/s (64373 bytes in 0.009s)Pushing root script
352 KB/s (361 bytes in 0.001s)Pushing Busybox
7068 KB/s (1867568 bytes in 0.258s)Pushing viewmem
2645 KB/s (5417 bytes in 0.002s)Pushing raw exploit code
54 KB/s (56 bytes in 0.001s)Setting Permissions....
Executing Root Exploit.
[*] s_show->seq_printf format string found at: 0xC086C348
[*] sys_setresuid found at 0xC00967C4
[*] patching sys_setresuid at 0xC0096808
remounting system rw....
moving su into position
moving Superuser.apk into position
Your device should be rooted. If you have upgraded past VRALJB firmware the exploit may not function properly.
CASUAL requires a reboot because we look at the memory logs after the device boots to verify proper bootloader version.
rebooting...
[x]Ready for exploit
[x]Found rooted device
[INFO] Reading 512 bytes at 0x40000200...
HellNo
IMPROPER BOOTLOADER VERSION DETECTED. FOLLOW DIRECTIONS NOOB! GUYS LIKE YOU ARE THE REASON DEVELOPERS HAVE SO MUCH PROBLEMS!!!!!! DO YOU REALIZE WHAT IT TAKES TO MAKE SOMETHING LIKE THIS COME TOGETHER?? AND HERE YOU ARE JUST TRYING TO SCREW THINGS UP.... DAMNIT! GET OFF THE INTERNET!
Click to expand...
Click to collapse
slightly off-topic, but I almost want to do this to my phone to see that end message. amazing. who wrote that, adam?
Hi, I have a stock Tablet Z on 10.7.A.0.222
I have successfully unlocked the bootloader via instructions on xperia firmware. However I have been unable to root it or install twrp.
I am a complete noob at this but the tablet is running incredibly laggy as stock so want to refresh it. I was using this guide:
https://www.cyanogenmods.org/forums/topic/xperia-tablet-z-cm14-cyanogenmod-14-nougat-7-0-rom/
In that guide I got to 1b which led me to this guide for installing recovery:
https://www.cyanogenmods.org/forums/topic/install-twrp-recovery-android-using-fastboot/
When i try to do step 6 the tablet shuts off and does not go into bootloader mode where I can flash twrp.
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
cward0625 said:
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
Click to expand...
Click to collapse
Hello!
Look at this thread.
Rootk1t said:
Hello!
Look at this thread.
Click to expand...
Click to collapse
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
- Root. Follow Bin4ry root : http://forum.xda-developers.com/show....php?t=1886460
Download : http://forum.xda-developers.com/show....php?t=1886460
Below is what I get in the command prompt when doing the steps. When I tried option 4 for new xperia root it did not work...it just hangs here:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry =
= (15.06.2014) v36 =
======================================================================
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 4
Please connect Xperia device with enabled USB-Debugging now to your Computer
Going to copy over some files ...
33 KB/s (442 bytes in 0.012s)
33 KB/s (170 bytes in 0.004s)
13 KB/s (57 bytes in 0.003s)
Starting restore operation, please look on your device and confirm restore!
after that press anykey here in the console
Now unlock your device and confirm the restore operation.
Press any key to continue . . .
After restore is confirmed please look on your device and choose "Service Tests -> Display" in Service menu and WAIT THERE!"
Starting: Intent { act=android.intent.action.MAIN cmp=com.sonyericsson.android.servicemenu/.ServiceMainMenu }
/data/local/tmp/onload.sh ...
Then if I try option 1 instead I get this (although I do not think this is the correct option anyways:
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Exploit type:
0) xsacha Z2 Tablet Root
1) jcase Z1S Root (make sure to download the pwn binary first from XDA thread!)
Make a choice: 1
Please connect your device with enabled USB-Debugging ...
Copy needed files ...
4106 KB/s (574722 bytes in 0.136s)
6023 KB/s (104576 bytes in 0.016s)
5317 KB/s (2139595 bytes in 0.392s)
72 KB/s (148 bytes in 0.001s)
1024 KB/s (2092 bytes in 0.001s)
4525 KB/s (1109128 bytes in 0.239s)
Beaups and jcase were here
donations may go here, pleaes say what it was for -> [email protected]
Rebooting device, please wait ...
mount: Permission denied
dd: /system/xbin/su: Read-only file system
chown: /system/xbin/su: No such file or directory
Unable to open /system/xbin/su: No such file or directory
ln: /system/bin/su: Read-only file system
dd: /system/app/Superuser.apk: Read-only file system
chown: /system/app/Superuser.apk: No such file or directory
Unable to open /system/app/Superuser.apk: No such file or directory
dd: /system/xbin/busybox: Read-only file system
chown: /system/xbin/busybox: No such file or directory
Unable to open /system/xbin/busybox: No such file or directory
/data/local/tmp/install_tool.sh[39]: /system/xbin/busybox: not found
mount: Permission denied
"If this helped you please consider donating to the original author jcase: http://forum.xda-developers.com/showpost.php?p=53407127&postcount=1004"
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
cward0625 said:
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
Click to expand...
Click to collapse
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Rootk1t said:
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Click to expand...
Click to collapse
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
cward0625 said:
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
Click to expand...
Click to collapse
wiping and installing 14.1 did not work, but when i did 15.1 it did. I think I should be set now.
Thanks