I messed up but I fixed it, mostly. I picked up a note two from Verizon hardware version I605.06 but coming from the Nexus I quickly tired of touchwiz and longed for the halcyon days of CyanogenMod. I ended up using heimdall to root and install Recovery but forgot that the bootloader was still locked, so soft bricked it. Tried restoring to stock using Odin but could not use Official VRALJB4.1.1 since it would fail at sbin. After figuring out that this had something to do with the bootloader I used the the alternate restore file and my phone worked again. So I started over using Casual and was able to get root again but apparently my bootloader is no longer stock and so it tells me to get off the internets. I was able to flash root66 but can’t for the life of me figure out how to unlock the bootloader.
Android Version: 4.1.1
Baseband Version: I605VRALJB
Kernel Version: 3.0.31-414933
[email protected]#1
SMP PREEMPT Sun Oct 28 13:34:23 KST2012
Build Number: JRO03C.I605VRALJB
Hardware Version: I605.06
Edit: I also have stock recovery already installed.
Really?
Is this question too hard or too stupid?
Additional Info
The first time I run casual after reboot it tells me I don't have root and need to get root. The second time I run casual it gives me this.
mkdir failed for /data/local/tmp, File exists
Pushing dependencies
Pushing su binary...
7484 KB/s (91980 bytes in 0.012s)Pushing SuperSU app...
7429 KB/s (996704 bytes in 0.131s)Pushing Exynos-Abuse exploit
6984 KB/s (64373 bytes in 0.009s)Pushing root script
352 KB/s (361 bytes in 0.001s)Pushing Busybox
7068 KB/s (1867568 bytes in 0.258s)Pushing viewmem
2645 KB/s (5417 bytes in 0.002s)Pushing raw exploit code
54 KB/s (56 bytes in 0.001s)Setting Permissions....
Executing Root Exploit.
[*] s_show->seq_printf format string found at: 0xC086C348
[*] sys_setresuid found at 0xC00967C4
[*] patching sys_setresuid at 0xC0096808
remounting system rw....
moving su into position
moving Superuser.apk into position
Your device should be rooted. If you have upgraded past VRALJB firmware the exploit may not function properly.
CASUAL requires a reboot because we look at the memory logs after the device boots to verify proper bootloader version.
rebooting...
[x]Ready for exploit
[x]Found rooted device
[INFO] Reading 512 bytes at 0x40000200...
HellNo
IMPROPER BOOTLOADER VERSION DETECTED. FOLLOW DIRECTIONS NOOB! GUYS LIKE YOU ARE THE REASON DEVELOPERS HAVE SO MUCH PROBLEMS!!!!!! DO YOU REALIZE WHAT IT TAKES TO MAKE SOMETHING LIKE THIS COME TOGETHER?? AND HERE YOU ARE JUST TRYING TO SCREW THINGS UP.... DAMNIT! GET OFF THE INTERNET!
Here's your answer. Use the correct unlock method. That's the old version which doesn't work anymore m you need the one labeled jail break
Sent from my SGH-T889 using xda app-developers app
You were right.
kintwofan said:
Here's your answer. Use the correct unlock method. That's the old version which doesn't work anymore m you need the one labeled jail break
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
As promised, first born son will be air shipped later today, will post back with tracking information.
bazbazbaz said:
As promised, first born son will be air shipped later today, will post back with tracking information.
Click to expand...
Click to collapse
Cool, I will post when received!
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Cool, I will post when received!
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Ive tried all the methods with no luck, the casual alsways fails at the end after downloading the pit file, i tried 4 computers, 5 USB cords and 40+ usb ports.
bazbazbaz said:
The first time I run casual after reboot it tells me I don't have root and need to get root. The second time I run casual it gives me this.
mkdir failed for /data/local/tmp, File exists
Pushing dependencies
Pushing su binary...
7484 KB/s (91980 bytes in 0.012s)Pushing SuperSU app...
7429 KB/s (996704 bytes in 0.131s)Pushing Exynos-Abuse exploit
6984 KB/s (64373 bytes in 0.009s)Pushing root script
352 KB/s (361 bytes in 0.001s)Pushing Busybox
7068 KB/s (1867568 bytes in 0.258s)Pushing viewmem
2645 KB/s (5417 bytes in 0.002s)Pushing raw exploit code
54 KB/s (56 bytes in 0.001s)Setting Permissions....
Executing Root Exploit.
[*] s_show->seq_printf format string found at: 0xC086C348
[*] sys_setresuid found at 0xC00967C4
[*] patching sys_setresuid at 0xC0096808
remounting system rw....
moving su into position
moving Superuser.apk into position
Your device should be rooted. If you have upgraded past VRALJB firmware the exploit may not function properly.
CASUAL requires a reboot because we look at the memory logs after the device boots to verify proper bootloader version.
rebooting...
[x]Ready for exploit
[x]Found rooted device
[INFO] Reading 512 bytes at 0x40000200...
HellNo
IMPROPER BOOTLOADER VERSION DETECTED. FOLLOW DIRECTIONS NOOB! GUYS LIKE YOU ARE THE REASON DEVELOPERS HAVE SO MUCH PROBLEMS!!!!!! DO YOU REALIZE WHAT IT TAKES TO MAKE SOMETHING LIKE THIS COME TOGETHER?? AND HERE YOU ARE JUST TRYING TO SCREW THINGS UP.... DAMNIT! GET OFF THE INTERNET!
Click to expand...
Click to collapse
slightly off-topic, but I almost want to do this to my phone to see that end message. amazing. who wrote that, adam?
Related
I have Frankensteined some scripts and binaries together with some bash programming and created a linux script that will sticky root and/or overclock your evo 3d.
Just trying to give back to the community.
Hope that all of you linux/MAC users like it...
BTW the defaults for overclocking are 33 for the multiplier and 1375000 for the voltage.
P.S. you have to have adb in your $PATH
Version 1.2 is up and should fix ubuntu and mac issues. Please test and if it works for you press thanks.
Thanks
l33tlinuxh4x0r
Got error:
rootme: 14: Syntax error: "(" unexpected
I'm on Ubuntu 11.04 64bit
vboyz103 said:
Got error:
rootme: 14: Syntax error: "(" unexpected
I'm on Ubuntu 11.04 64bit
Click to expand...
Click to collapse
does Jermey's script work for you?
l33tlinuxh4x0r said:
does Jermey's script work for you?
Click to expand...
Click to collapse
Nope, I tried his as well and didn't work, same error.
vboyz103 said:
Nope, I tried his as well and didn't work, same error.
Click to expand...
Click to collapse
must be something to do with the version of linux that you are running or maybe an enviroment variable that you have set.
Are you using bash or another shell?
simple solution to fix these scripts if you are having that issue
is to open the script in a txt editor and remove every instance of the word "function" from the script.
I added the attached file with it done.
Note: Remove ".txt" from the file and replace it with the other one.
I belive you are missing the command to push the kernel to the tmp folder
tigereyeslalo said:
I belive you are missing the command to push the kernel to the tmp folder
Click to expand...
Click to collapse
You are absolutly right sorry about that... I have attached an updated zip. This should also fix the ubuntu issues with the function command.
mine seems to hang when I do this now.
---------- Running Fre3vo please wait ----------
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
I've used J.ermey's script without any issues.
using on mac
after I hit control-C, seems like it runs through everything.
------------ Setting up directories ------------
--------- Installing su,busybox,sqlite ---------
3430 KB/s (1448982 bytes in 0.412s)
2684 KB/s (22228 bytes in 0.008s)
4633 KB/s (1120536 bytes in 0.236s)
------------- Installing Superuser -------------
5287 KB/s (398990 bytes in 0.073s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
------------------------------------------------
I can get the root shell via adb. But nothing requiring root works on the phone.
I've tried rebooting the phone multiple times
lmbebo said:
mine seems to hang when I do this now.
---------- Running Fre3vo please wait ----------
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
I've used J.ermey's script without any issues.
using on mac
after I hit control-C, seems like it runs through everything.
------------ Setting up directories ------------
--------- Installing su,busybox,sqlite ---------
3430 KB/s (1448982 bytes in 0.412s)
2684 KB/s (22228 bytes in 0.008s)
4633 KB/s (1120536 bytes in 0.236s)
------------- Installing Superuser -------------
5287 KB/s (398990 bytes in 0.073s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
------------------------------------------------
I can get the root shell via adb. But nothing requiring root works on the phone.
I've tried rebooting the phone multiple times
Click to expand...
Click to collapse
It looks like you are killing the fre3vo script which explains why you aren't getting root.
not sure why it doesn't work on mac... I know that macs are unix and this script is mostly copied from J.eremy so if his works so should mine but it is intended for linux not mac so maybe that is why it doesn't work not sure though.
I left the script running for 10 mins which is why I'm killing it. It was just hanging.
On J.ermey's script, it was over very quick.
lmbebo said:
I left the script running for 10 mins which is why I'm killing it. It was just hanging.
On J.ermey's script, it was over very quick.
Click to expand...
Click to collapse
I think that I found the issue... I had "" around the adb command and mac apparently didn't like it... Fixed now should work on mac and linux flawlessly
Check first post for latest version (1.2)
aha! many thanks!
it works now. As does Titanium backup (which I was unable to get to work on other scripts)
How do i run this on a mac? Not sure where to begin.....
Please help. Thanks
Getting error when overclocking.
TURN OFF DISPLAY AND LEAVE IT OFF UNTIL SCRIPT COMPLETES!
Press any key when screen is off...
What multiplier would you like to use to overclock? (press enter for default)
What voltage would you like to use to overclock? (press enter for default)
Overclocking now... (use setcpu to adjust clock speeds)
1173 KB/s (5832 bytes in 0.004s)
insmod: can't insert '/data/local/tmp/8x60_oc.ko': invalid module format
Complete, Press ENTER to go back
k wizzle said:
Getting error when overclocking.
TURN OFF DISPLAY AND LEAVE IT OFF UNTIL SCRIPT COMPLETES!
Press any key when screen is off...
What multiplier would you like to use to overclock? (press enter for default)
What voltage would you like to use to overclock? (press enter for default)
Overclocking now... (use setcpu to adjust clock speeds)
1173 KB/s (5832 bytes in 0.004s)
insmod: can't insert '/data/local/tmp/8x60_oc.ko': invalid module format
Complete, Press ENTER to go back
Click to expand...
Click to collapse
this is not a problem with the script... it has to do with the version of the kernel that you have... the sensation and pre ota evo 3d's need a different kernel module... you can find the different modules here http://forum.xda-developers.com/showthread.php?t=1158951
Do we have a way to root this yet? I am using a sgpt12 us edition and i lost my root when my wife updated to release 6a. Any help would be great
danny3202 said:
Do we have a way to root this yet? I am using a sgpt12 us edition and i lost my root when my wife updated to release 6a. Any help would be great
Click to expand...
Click to collapse
hi,
two things:
Code:
adb pull /system/app/VpnDialogs.apk
adb pull /data/system/packages.xml
attach and let me see
C:\Users\dannyandlyn\Desktop\adb>adb pull /data/system/packages.xml
1268 KB/s (182368 bytes in 0.140s)
C:\Users\dannyandlyn\Desktop\adb>adb pull /system/app/VpnDialogs.apk
2349 KB/s (37529 bytes in 0.015s)
C:\Users\dannyandlyn\Desktop\adb>
C:\Users\dannyandlyn\Desktop\adb>adb pull /data/system/packages.xml
1268 KB/s (182368 bytes in 0.140s)
C:\Users\dannyandlyn\Desktop\adb>adb pull /system/app/VpnDialogs.apk
2349 KB/s (37529 bytes in 0.015s)
Click to expand...
Click to collapse
ok now attach that files or upload somewhere
i got it sry im a little slow
condi, thank you for taking an interest in this matter. I would like assist in any way possible. Please keep up the great work.
hmmmm
not do-able at the time per condi's efforts he tried on mine to no sucess
payment for root
If any of the devs can figure out how to root release 6a id be willing to pay them for it. I need to bet this rooted before I deploy to afganistain as I wojt have a reliable inet connection over there. Any one intrested pm me
I Just bought the new Fujitsu Arrows F-04E running android 4.0.4.
For now, there is nothing I could find on how to root it. I already tried the method of Bin4ry (Root MANY ANDROID) but didn't work. I'm now actively searching on Japanese sites, but nothing so far. If by chance someone in this community has some useful information that can help, please don't hesitate to share them. I will also share what I find, if any.
Thanks and hope we can figure the way to do it !
Cheers
The same with this enquire. If anybody enable to root and upgrade new Rom for F-04E, can u pls share for us? Thanks
luyenlt said:
The same with this enquire. If anybody enable to root and upgrade new Rom for F-04E, can u pls share for us? Thanks
Click to expand...
Click to collapse
More : If any one known the way to unlock !
phankhang said:
More : If any one known the way to unlock !
Click to expand...
Click to collapse
Please help if there are any solution . Thank all
root
1. Setup USB drivers on PC
2. Plug in Fujitsu Arrows V F-04E to PC (USB-debugging on)
3. Run root\runme.bat
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
did you got this resolved? USB debugging enabled on your device? did you install the driver correctly first?
m_ghv_geo said:
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
Click to expand...
Click to collapse
Your phone is F-02E. The root tool for F-04E
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
m_ghv_geo said:
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
Click to expand...
Click to collapse
greatslon said:
1. Setup USB drivers on PC
2. Plug in Fujitsu Arrows V F-04E to PC (USB-debugging on)
3. Run root\runme.bat
Click to expand...
Click to collapse
You tried already, and is it successful rooted for F-04E?
Robiche said:
I Just bought the new Fujitsu Arrows F-04E running android 4.0.4.
For now, there is nothing I could find on how to root it. I already tried the method of Bin4ry (Root MANY ANDROID) but didn't work. I'm now actively searching on Japanese sites, but nothing so far. If by chance someone in this community has some useful information that can help, please don't hesitate to share them. I will also share what I find, if any.
Thanks and hope we can figure the way to do it !
Cheers
Click to expand...
Click to collapse
Hi bro,
Fujitsu F-04E rooted full
Pls checking some pictures below in attachment
If any support, feel free to contact me via YM: lethanhluyen
Hi,
I'm a noob at this stuff. I'm trying to root my f-04E. I've downloaded the two zip files, but I don't know how to install the usb drivers. I've tried installing them onto my SDK manager and still nothing happens. I've tried the runme option in the root file, but it says that my device is not detected. Any help would be awesome.
Phangtonpower said:
Hi,
I'm a noob at this stuff. I'm trying to root my f-04E. I've downloaded the two zip files, but I don't know how to install the usb drivers. I've tried installing them onto my SDK manager and still nothing happens. I've tried the runme option in the root file, but it says that my device is not detected. Any help would be awesome.
Click to expand...
Click to collapse
pls contact me for details
luyenlt said:
pls contact me for details
Click to expand...
Click to collapse
Actually I did send you a PM on here. Please check your in box
Is there anyone else with any ideas?
That we can have it posted here and have it documented for others to reference in the future.
Weekend bump.
About to call this one a lost cause bump
Thank you, was able to root no problem on the first try.
Although I did use generic google drivers. Sorry would link where I got them but cannot remember.
*update
Also wanted to mention that I have a EM01f, emobiles equivalent of this device.
*Update
though i was able to install superuser and passed rootchecker test i found I couldnt do a lot of things. So I downloaded the newest version of superuser renamed it to superuser.apk replaced the one in the zip and reran it. Works perfect, so far. Thanks again!
Hello to everyone I had an issue that was my phone restarts during calls and randomly, I just follow the root guide to eliminate all docomo bloatware
I root the phone successful but three days after a lot of app showed errors and restarts
When I restart phone the phone show three errors that are:
Com. Android. Phone process was closed and the Hceviewermaganer process has stopped and that situation is always on start
My phone doesn't work because this apps doesn't permit access to phone menu
Version of my phone is V16R
Question how I can try to reinstall original software, anyone has the recovery files to be uploaded through the recovery
Or any method to access through a Pc
Regards
Sent from my GT-I9300 using xda app-developers app
moku160 said:
Thank you, was able to root no problem on the first try.
Although I did use generic google drivers. Sorry would link where I got them but cannot remember.
*update
Also wanted to mention that I have a EM01f, emobiles equivalent of this device.
Click to expand...
Click to collapse
Hello !
I also have a EM-01F but I've the same problem as mentioned before. SuperUser icon is correctly installed on the device but when it's launched, an error pops to say me it can't install su access...
Which drivers have you used are what root program have you launched ?
Guigui_18892 said:
Hello !
I also have a EM-01F but I've the same problem as mentioned before. SuperUser icon is correctly installed on the device but when it's launched, an error pops to say me it can't install su access...
Which drivers have you used are what root program have you launched ?
Click to expand...
Click to collapse
check out my follow up post. I had to redo it, replacing the given superuser.apk without a newer version. THen it seemed to work correctly.
Hello,
I have been struggling to root my new tablet for 2 days now without success.
I also have apple devices and jailbreak them for years without any problem but today I am completly stucked.
I am unable to intall correctly the ADB Interface... It is impossible.
I tried to install, desinstall, reinstall many times the usb drivers. Restart the computer many times...
I tried the SDK android tool with installation of the USB driver package v7.
I tried with PDANet.
I tried with the package of Xboxepert guy who posted a very easy way rooting process on xda developper...
Nothing is working.
I still have an exclamation point on the device !!
When I try to install the drivers, it always tells me (sorry for my translation, I am french !!):
"An error occurs during the hardware installation
A service installation section of the INF file is not valid".
I am under XP 32 bits SP3.
I would be very happy if someone knew what to do or help me to go through...
It is driving me crazy ..
Thank you for your help.
Christophe
Rooting problem
It seems that I succeed to set-up the ADB interface.
I can interact with my device with adb.exe in the command prompt shell, things like "adb shell" ...
But I can not root, using motochopper or the tool form xboxepert..
I tried with SRSRoot tool too.
I have made a complete restore of my device from scratch....
Always the same:
cannot stat 'pwn': No such file or directory
Unable to chmod /data/local/tmp/pwn: No such file or directory
[*] Pushing root tools...
1149 KB/s (91980 bytes in 0.078s)
1823 KB/s (1867568 bytes in 1.000s)
1893 KB/s (969701 bytes in 0.500s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
[*] Rooting device
/system/bin/sh: /data/local/tmp/pwn: not found
[*] Cleaning up...
rm failed for /data/local/tmp/pwn, No such file or directory
[*] Exploit complete. Rebooting device.[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Flashing CWM Touch Recovery!
1740 KB/s (7045120 bytes in 3.953s)
/system/bin/sh: su: not found
[*] All Done! Final reboot!
solved
I don't know how I made it but I tried a last time and it worked.
Envoyé depuis mon M470BSA en utilisant Tapatalk 4 Beta
I'm using the droidrzr.com as ldirected in the roms section.
phase 3 fails:
Code:
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
4558 KB/s (543080 bytes in 0.116s)
3804 KB/s (1867568 bytes in 0.479s)
3351 KB/s (476557 bytes in 0.138s)
3610 KB/s (63838 bytes in 0.017s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Any suggestions.
I'm looking for a ROM to replace stock which supports USB OTG and allows disabling of the HDMI port. Wife passed her phone on to my son when we upgraded hers but its always detecting HDMI even if there is nothing plugged in. The disable detection setting in the stock JB rom only disabled for a short time.
Thanks
There be will be a video by therazrguy in YouTube for rooting all jellybean RAZRs.. That's an easy method...
You've to disable MotoDockService. Also i guess you're having the screen Force Portrait issue. If it's so, there's a root app to force orientation..
A friend of mine bought a refurbished RAZR and it has this issue
EugeneNine said:
I'm using the droidrzr.com as ldirected in the roms section.
phase 3 fails:
Code:
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
4558 KB/s (543080 bytes in 0.116s)
3804 KB/s (1867568 bytes in 0.479s)
3351 KB/s (476557 bytes in 0.138s)
3610 KB/s (63838 bytes in 0.017s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Any suggestions.
I'm looking for a ROM to replace stock which supports USB OTG and allows disabling of the HDMI port. Wife passed her phone on to my son when we upgraded hers but its always detecting HDMI even if there is nothing plugged in. The disable detection setting in the stock JB rom only disabled for a short time.
Thanks
Click to expand...
Click to collapse
install this and do it so easy
Kingo Android Root
Hi!
You can try to download this app :
http://www.mediafire.com/download/n...1.3.6_Cekas+FIX+Sharebertron.blogspot.com.apk
AFAIK it's mod-ed version of RootMaster, the mod makes it easier to understand the Chinese words.
You'll receive notification from Google prior to installing saying that this app is unsafe since it's trying to break the android secure, but I think it's all fine, rooted my 4.1.2 JB XT910, when I was in ICS, TheRAZRGuy's method worked for me but ever since I flashed JB it wont work anymore. This worked well for me, no problems so far.
Hope this helped!