The developer threads seem to indicate that there is a danger running JB of 'bricking" the TP if the battery is allowed to discharge all the way. It is suggested that an app like "Battery Check" should be used to turn off the TP when the battery reaches a set percentage charge.
My problem is that I'm not sure "Battery Check" is working on my TP. The only "setting" I see when I run it is a slide bar for setting the percent of charge. But when I set the bar, and tap "Launch Service", the app exits. I'm assuming that it is now set to turn off when it reaches what I set. The problem is that my assumption could be wrong and being wrong could "brick" my TP. A chance I'm NOT willing to take.
Can anyone verify that "Battery Check" works and that I've set it up properly? Does it actually turn off the TP, or just "sound an alarm" that I'm likey to miss if I'm asleep?
lewmur said:
The developer threads seem to indicate that there is a danger running JB of 'bricking" the TP if the battery is allowed to discharge all the way. It is suggested that an app like "Battery Check" should be used to turn off the TP when the battery reaches a set percentage charge.
My problem is that I'm not sure "Battery Check" is working on my TP. The only "setting" I see when I run it is a slide bar for setting the percent of charge. But when I set the bar, and tap "Launch Service", the app exits. I'm assuming that it is now set to turn off when it reaches what I set. The problem is that my assumption could be wrong and being wrong could "brick" my TP. A chance I'm NOT willing to take.
Can anyone verify that "Battery Check" works and that I've set it up properly? Does it actually turn off the TP, or just "sound an alarm" that I'm likey to miss if I'm asleep?
Click to expand...
Click to collapse
Try Automatelt it is easy to setup and has a test function. If you have any problems with it pm me.
sstar said:
Try Automatelt it is easy to setup and has a test function. If you have any problems with it pm me.
Click to expand...
Click to collapse
Turning off the TP isn't listed as an "Action" to take when the "trigger" (battery below) is reached.
lewmur said:
Turning off the TP isn't listed as an "Action" to take when the "trigger" (battery below) is reached.
Click to expand...
Click to collapse
Action is shutdown see screenshots below, i know there's one to many by i can't find my glasses.
Have fun there are lots of options.
Sent from my cm_tenderloin using Tapatalk 2
sstar said:
Action is shutdown see screenshots below, i know there's one to many by i can't find my glasses.
Have fun there are lots of options.
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
"Set Shutdown" isn't listed. What am I missing?
lewmur said:
"Set Shutdown" isn't listed. What am I missing?
Click to expand...
Click to collapse
Under action it is called (shutdown device) it is there look at the screenshot.
It is forth from the bottom of the list of actions.
sstar said:
Under action it is called (shutdown device) it is there look at the screenshot.
It is forth from the bottom of the list of actions.
Click to expand...
Click to collapse
Do you have a version # for your Automateit app. My screen looks like that but there is no "Shutdown" option. I solved the problem by installing "Power Off" and having Automateit call that app as the "Action". That worked.
Thanks
Lew
lewmur said:
Do you have a version # for your Automateit app. My screen looks like that but there is no "Shutdown" option. I solved the problem by installing "Power Off" and having Automateit call that app as the "Action". That worked.
Thanks
Lew
Click to expand...
Click to collapse
Version 3.0.51 which is the latest all my apps are set to auto update.
sstar said:
Under action it is called (shutdown device) it is there look at the screenshot.
It is forth from the bottom of the list of actions.
Click to expand...
Click to collapse
sstar said:
Version 3.0.51 which is the latest all my apps are set to auto update.
Click to expand...
Click to collapse
This is weird. There was no shutdown option when I created the first "rule". But, now, if I go back to add another rule, the Shutdown action IS available. And my version is the same as yours.
lewmur said:
This is weird. There was no shutdown option when I created the first "rule". But, now, if I go back to add another rule, the Shutdown action IS available. And my version is the same as yours.
Click to expand...
Click to collapse
Go figure, I am glad you finally got it sorted and trust the screen shots helped. You now shouldn't have to worry about a bricked tablet but I would still shutdown if you are not going to use it or are going out etc .
i had that problem too. something to do with some actions requiring root like shutdown, but i don't remember but i enabled it somehow. check settings and look for enabling root options maybe.
When I installed AutomateIt on my TB, I was asked to confirm root access for the app.
Related
Hi,
I seem to have this annoying problem. Lets say I am reading an article in some app. Now my phone goes on standby after 1 minute of inactivity. In ICS, I could press the home button and get back to the app I was on. In JB pressing the home button closes the app and brings me back to home screen. Is there a way to disable that?
Yes there is. Go to settings, than developer settings, scroll down to bottom and uncheck "Destroy any activity soon as user leaves is"
Also, check background process limit. If it is set to 0 then select "Standard Limit"
Sent from my GT-I9300 using xda app-developers app
Fycola123 said:
Yes there is. Go to settings, than developer settings, scroll down to bottom and uncheck "Destroy any activity soon as user leaves is"
Also, check background process limit. If it is set to 0 then select "Standard Limit"
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
My developer options were off. And none of that was checked anyways. The annoyance started when I updated to JB.
Than really i cant help you, because i dont have that problem. I also have jelly bean installed.
Sent from my GT-I9300 using xda app-developers app
Fycola123 said:
Than really i cant help you, because i dont have that problem. I also have jelly bean installed.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Oh well thanks. Hopefully someone can figure out a way to solve this problem.
Have exactly the same problem. Before Jelly Bean this didn't happen.
I guess I'll just have to get used to waking it up with the power button instead until there's a fix.
Btw I'm running stock 4.1.1.
Sent from my GT-I9300 using xda developers app
circuit89 said:
Hi,
I seem to have this annoying problem. Lets say I am reading an article in some app. Now my phone goes on standby after 1 minute of inactivity. In ICS, I could press the home button and get back to the app I was on. In JB pressing the home button closes the app and brings me back to home screen. Is there a way to disable that?
Click to expand...
Click to collapse
The problem is that the lock screen has not yet activated, therefore commands are passed to the current app running. You need to use the power button to turn on the screen. Else, search thru the settings for where to change the lock screen to lock immediately the screen the screen goes off. This might help.
HTH
guhvanoh said:
The problem is that the lock screen has not yet activated, therefore commands are passed to the current app running. You need to use the power button to turn on the screen. Else, search thru the settings for where to change the lock screen to lock immediately the screen the screen goes off. This might help.
HTH
Click to expand...
Click to collapse
yes it helps.you must set the lock screen and it works.but is there any way without look screen to ?
This problem seems to be affecting those who turned off S-Voice
Just go into its setting and enable it to activate via double pressing home button. The problem then goes away in JB.
yes it works ! i have only installed s-voice apk and thats it !
When I put my phone in this dock, I always get a popup offering me a couple of apps. I don't want any apps to run when docking, any ideas how I get rid of this bloody annoying popup?
I tried putting an action in SmartConnect, which runs, but the popup STILL appears! :crying:
Please help...
rickgillyon said:
When I put my phone in this dock, I always get a popup offering me a couple of apps. I don't want any apps to run when docking, any ideas how I get rid of this bloody annoying popup?
I tried putting an action in SmartConnect, which runs, but the popup STILL appears! :crying:
Please help...
Click to expand...
Click to collapse
Turn off Daydream (Settings/Display/Daydream.)
Sebring5 said:
Turn off Daydream (Settings/Display/Daydream.)
Click to expand...
Click to collapse
Already off.
It is the "Smart Connect" application that launches an application called "view".
SC can trigger different events when the phone is placed in the magnetic dock. The default one being to start a slide-show of your stored photos.
With the phone in the dock you can slide from the top, select the view app (looks like a blue wavy thing) and hold down the slide-show and remove it.
Or launch SC and just turn off View completely with the blue switch at the top.
cmclaughlan said:
It is the "Smart Connect" application that launches an application called "view"
Click to expand...
Click to collapse
No, it's not. View is disabled in Smart Connect, so there is no Notification. As I said in the OP, even if I put an action in SmartConnect, this popup appears in addition...
Turning the view thing off completely using the switch at the top as described above worked for me.
AndyGarton said:
Turning the view thing off completely using the switch at the top as described above worked for me.
Click to expand...
Click to collapse
Not for me, because as I said it's not SmartConnect doing it. View is already disabled.
Could you please try posting Screenshots for further assistance?
Sent with my Xiaomi MI2 with Tapatalk 4
Recently, I'm unable to auto-hibernate Facebook app. But if I manually long-press the Facebook row and then tap the Z button, the Facebook app can be hibernated. Anyone knows if it's Facebook problem or Greenify issue?
itandy said:
Recently, I'm unable to auto-hibernate Facebook app. But if I manually long-press the Facebook row and then tap the Z button, the Facebook app can be hibernated. Anyone knows if it's Facebook problem or Greenify issue?
Click to expand...
Click to collapse
It is neither. Rather it is by design. Any app busy in the background (not merely running), will show up as "working". After it completes its work, the status will change to 'will be hibernated after screen off'. It will then be automatically hibernated once the screen is off.
This is to allow apps to complete their work before being hibernated.
If you don't want Facebook to even work, highlight it and then tap the three dot menu at the top and choose 'ignore the app's state'.
I am not responsible for any consequences.
tnsmani said:
It is neither. Rather it is by design. Any app busy in the background (not merely running), will show up as "working". After it completes its work, the status will change to 'will be hibernated after screen off'. It will then be automatically hibernated once the screen is off.
This is to allow apps to complete their work before being hibernated.
If you don't want Facebook to even work, highlight it and then tap the three dot menu at the top and choose 'ignore the app's state'.
I am not responsible for any consequences.
Click to expand...
Click to collapse
I'm unable to find the 'ignore the app's state' from the menu
itandy said:
I'm unable to find the 'ignore the app's state' from the menu
Click to expand...
Click to collapse
Which version of Greenify are you running?
tnsmani said:
Which version of Greenify are you running?
Click to expand...
Click to collapse
2.8 beta 2
itandy said:
2.8 beta 2
Click to expand...
Click to collapse
itandy said:
2.8 beta 2
Click to expand...
Click to collapse
I am on the same version. So it seems to have an issue with your setup.
After ignoring an app's state, when you highlight it again, you will get an option for reconsidering its state as in the screen shot below.
I have no idea why it is not showing up for you.
itandy said:
I'm unable to find the 'ignore the app's state' from the menu
Click to expand...
Click to collapse
Highlight Facebook, tap the Zzz (if Facebook is working). Now comes a lil Window where you can click "ignore the app's state"
Black_Focus_X said:
Highlight Facebook, tap the Zzz (if Facebook is working). Now comes a lil Window where you can click "ignore the app's state"
Click to expand...
Click to collapse
Sorry I don't get you. What do you mean by lil Window?
itandy said:
Sorry I don't get you. What do you mean by lil Window?
Click to expand...
Click to collapse
My english is not so good sorry. If you highlighted Facebook, than tap the 3 dots right, tap "put into hibernation now", after this must come a popup where you can mark "ignore the app's state"
This one
Black_Focus_X said:
My english is not so good sorry. If you highlighted Facebook, than tap the 3 dots right, tap "put into hibernation now", after this must come a popup where you can mark "ignore the app's state"
Click to expand...
Click to collapse
I had already suggested that and he had clarified that he doesn't get that option.
@itandy
Try what Black_Focus_X said earlier. When Facebook shows up as 'working', highlight it and then tap the 'zzz' at the bottom. You should get a pop-up window telling you that it is unsafe to hibernate an app in such conditions and also giving the option to ignore its state. Tick the option box, then OK.
Black_Focus_X said:
This one
Click to expand...
Click to collapse
Yes, this is like what tnsmani said. But I'm unable to find this option in the menu.
tnsmani said:
I had already suggested that and he had clarified that he doesn't get that option.
@itandy
Try what Black_Focus_X said earlier. When Facebook shows up as 'working', highlight it and then tap the 'zzz' at the bottom. You should get a pop-up window telling you that it is unsafe to hibernate an app in such conditions and also giving the option to ignore its state. Tick the option box, then OK.
Click to expand...
Click to collapse
Oh, I finally made it. The trick is to tap the Facebook row and then the Circular Zzz button at the bottom instead of long-pressing the Facebook app followed by the Zzz at the upper right hand corner. Thanks both of you guys!
itandy said:
Oh, I finally made it. The trick is to tap the Facebook row and then the Circular Zzz button at the bottom instead of long-pressing the Facebook app followed by the Zzz at the upper right hand corner. Thanks both of you guys!
Click to expand...
Click to collapse
That is what I was telling you from the beginning, tap, highlight not long press.
Anyway all is well that ends well.
Managed to hibernate but found that it is still running from Running Service
Using MM and 2.8 beta3
chding said:
Managed to hibernate but found that it is still running from Running Service
Using MM and 2.8 beta3
Click to expand...
Click to collapse
Deactivate it on Developer Options>Inactive Apps.
Edit:
Not sure about consequences since I don't use it.
tnsmani said:
Deactivate it on Developer Options>Inactive Apps.
Edit:
Not sure about consequences since I don't use it.
Click to expand...
Click to collapse
I'm having the same issue as the OP, despite ignoring the app's state in greenify and deactivating it from developer options -> inactive apps, Facebook still shows up in running services.
I have this problem also but I'm running 2.7.1. Where can you get 2.8?
tnsmani said:
@itandy
Try what Black_Focus_X said earlier. When Facebook shows up as 'working', highlight it and then tap the 'zzz' at the bottom. You should get a pop-up window telling you that it is unsafe to hibernate an app in such conditions and also giving the option to ignore its state. Tick the option box, then OK.
Click to expand...
Click to collapse
I've now installed what I think is 2.8 beta 3 bit still can't get this to apppear, perhaps because I can't get Facebook to appear in the working state. It does however keep getting started by other apps. I shouldn't have to stop the services manually in developer settings. So how is this accomplished? The whole reason I have Greenify is to stop Facebook and other data stealing from running rampant when I'm not using them.
chding said:
Managed to hibernate but found that it is still running from Running Service
Using MM and 2.8 beta3
Click to expand...
Click to collapse
MrMarques01 said:
I'm having the same issue as the OP, despite ignoring the app's state in greenify and deactivating it from developer options -> inactive apps, Facebook still shows up in running services.
Click to expand...
Click to collapse
Blario said:
It does however keep getting started by other apps. I shouldn't have to stop the services manually in developer settings. So how is this accomplished? The whole reason I have Greenify is to stop Facebook and other data stealing from running rampant when I'm not using them.
Click to expand...
Click to collapse
When it's awoken by another app, it will say "woken by ....." underneath the app name. If you tap on facebook in greenify main screen, then tap the scissors icon in top right of the page, a pop-up will explain then allow you to cut off the wake-up path. Play around with it and you'll find that cutting some wake-up paths is good and cutting others will stop notifications.
I currently have these paths cut-off for facebook:
...notify.MessengerForegroundProvider
...provider.PlatformProviderBase
What wake-up paths have other people cut?
Hi,
I would like to know how to force "State always ignored for hibernation". There are a couple of apps that are still popping up and refuse to hibernate and I still haven't been able to figure out how to force showing the message about ignoring one app state. I haven't been able to do it since earlier versions. Guess it is something very simple but I have tried many things and still have no clue
colibris79 said:
Hi,
I would like to know how to force "State always ignored for hibernation". There are a couple of apps that are still popping up and refuse to hibernate and I still haven't been able to figure out how to force showing the message about ignoring one app state. I haven't been able to do it since earlier versions. Guess it is something very simple but I have tried many things and still have no clue
Click to expand...
Click to collapse
Long press the app which should be hibernated while showing up in 'Pending Hibernation' list. You will get the option either in the three dot menu or on pulling up the green bar at the bottom depending on the setup.
tnsmani said:
Long press the app which should be hibernated while showing up in 'Pending Hibernation' list. You will get the option either in the three dot menu or on pulling up the green bar at the bottom depending on the setup.
Click to expand...
Click to collapse
Thanks but I don't get those options. When Iong press I only get the zzz option next to a - option. If I select with normal press I get the three dots on top bar but I don't get that one. I just can press "Put into hibernation now".
I am in version 3.3 since I had problems with last versions but I think it's been like this since older versions. I am using Orion 2.7 ROM (Android 6)
colibris79 said:
Thanks but I don't get those options. When Iong press I only get the zzz option next to a - option. If I select with normal press I get the three dots on top bar but I don't get that one. I just can press "Put into hibernation now".
I am in version 3.3 since I had problems with last versions but I think it's been like this since older versions. I am using Orion 2.7 ROM (Android 6)
Click to expand...
Click to collapse
Greenify v3.3 does not support this feature; you need to upgrade.
Davey126 said:
Greenify v3.3 does not support this feature; you need to upgrade.
Click to expand...
Click to collapse
The thing is that sometimes the option pops up (I have several apps hibernated with it). I just don't know how to force it myself.
Which version has it? Version 3.5 was giving me problems.
EDIT: Ok. I am back to version 3.6. I hope things go better this time.
Thanks both for your help.
colibris79 said:
The thing is that sometimes the option pops up (I have several apps hibernated with it). I just don't know how to force it myself.
Which version has it? Version 3.5 was giving me problems.
EDIT: Ok. I am back to version 3.6. I hope things go better this time.
Thanks both for your help.
Click to expand...
Click to collapse
Sorry to reopen this post again. But in one device that has Android 4.2.2 I just can install Greenify V. 3.0 build 5 (donation package). And I don't have the three dots options so I don't know how to force the options about ignoring state or cut the wake-up path to pop up...
Found it. I had to disable "Deep hibernation" from the experimental features. Now I can see the cut-off option again
You are missing a notification LED on LG G6?
You don't use the AlwaysOnDisplay (AOD)?
You are using Tasker?
I have a solution for you.
The AOD screens goes on if you have a new message and goes off after reading that massage.
Beside the newest version of Tasker you need additional the app Tasker Settings
I have attached two files "AOD_ON.tsk.xml" and "AOD_OFF.tsk.xml"
These are the Tasker task which turns the AlwaysOnDisplay on and off.
How to import these XML as Tasker task: read this XDA thread
Now you have to add 2 new profiles in Tasker
Profile 1 - Notification
Go to the Profile tab in Tasker, and press the "Plus" (+) button
Choose: EVENT - UI - NOTIFICATION ... you can choose now an app (owner application) let's say WhatsApp (you can choose more than one app)
Related task : AOD_ON
Important : leave all the fields TITEL, TEXT, SUBTEXT etc empty.
Profile 2 - Notification removed
Go to the Profile tab in Tasker, and press the "Plus" (+) button
Choose: EVENT- UI - NOTIFICATION REMOVED ... you can choose now an app (owner application) let's say WhatsApp (you can choose more than one app)
Related task : AOD_OFF
If you don't want to be notified in the middle of the night by AOD, you may have that Profile only active during daytime. Short tap the Prolie name, long tap the profile description. A new window pops up, choose ADD. A new window pops up, choose TIME. You can now define in which period of the day the profile is active.
LG G6 settings: Notifications/ LOCK Screen / do NOT choose Hide all notifications !
It works for me on LG G6 (H870)
Have fun
EDIT: for SMS & MMS add Contacts, Phone App and (if possible) SMS App to owner application in Tasker Profile
For missed calls you need to add 'Calling Accounts' apart from Phone app.
Here are the steps how to add this: (thanks to user Vitoski, who found out)
1. Click on the 'Owner Application'
2. click 'ALL' button at the right bottom corner
3. Select 'Calling Accounts'.
4. click back twice and tick to save changes.
EDIT : If you like to have a brighter AOD , please read this useful post added by user vitoski
Many thanks for that!
Thanks a lot to users Dracushor87 and Vitoski for testing and giving hints and ideas!
Edit : new versions of AOD_ON and AOD_OFF tasks
martmarq great post - thanks a lot!
I've been using AOD with Tasker since two days now and in most cases it works fine. It kicks in when the notification shows up and turns off when I remove the notification.
However sometimes the AOD turns on itself, even if there was no notification registered in the system. These are the two situations in which I have spotted this:
# when you go to Display Settings and click on three dots next to AOD - you don't need to change anything in there, just go there and back to homescreen.
# when you connect phone to the charger. Even when you disconnect it, the AOD stays on.
# under some other circumstances which I was not able to pinpoint right now
So, have you observed the same?
vitoski said:
martmarq
# when you go to Display Settings and click on three dots next to AOD - you don't need to change anything in there, just go there and back to homescreen.
# when you connect phone to the charger. Even when you disconnect it, the AOD stays on.
# under some other circumstances which I was not able to pinpoint right now
So, have you observed the same?
Click to expand...
Click to collapse
When you connect the phone to the charger, there is a notification.... therefor AOD should go on.
You can manage that by choosing apps (owner application) in Tasker. That solved the problem for me.
That might also solve the other circumstances.
I don't have that problem with the display settings... I have just tested that.
martmarq said:
When you connect the phone to the charger, there is a notification.... therefor AOD should go on.
You can manage that by choosing apps (owner application) in Tasker. That solved the problem for me.
That might also solve the other circumstances.
I don't have that problem with the display settings... I have just tested that.
Click to expand...
Click to collapse
Have you used specific apps which notifications you monitor within the profiles or left it blank (none of the apps is selected)? This is the way I made it and I suspect it may causes all of those issues I described. Definitely will test it, but thought I'm gonna check it with you
vitoski said:
Have you used specific apps which notifications you monitor within the profiles or left it blank (none of the apps is selected)? This is the way I made it and I suspect it may causes all of those issues I described. Definitely will test it, but thought I'm gonna check it with you
Click to expand...
Click to collapse
Yes, I have activated only the needed apps like WhatsApp, Email and so on.
I have edited the first post, because for SMS you need a new profile (see above)
for me, sms notifications work without creating a separate profile. i only added the Contacts app to the list ( with Phone app )
dracushor87 said:
for me, sms notifications work without creating a separate profile. i only added the Contacts app to the list ( with Phone app )
Click to expand...
Click to collapse
mmmhhh... yes, now it works. Seems I had not added one of those two....
For me the sms app worked fine too. Will check now with limiting the number of notifications to specific apps and let you guys know if I still experience the same problems as reported above.
---------- Post added at 02:02 PM ---------- Previous post was at 01:36 PM ----------
dracushor87 said:
for me, sms notifications work without creating a separate profile. i only added the Contacts app to the list ( with Phone app )
Click to expand...
Click to collapse
Are you using any 3rd party Phone/Contacts app or sock one? For some reason it doesn't work for me with stock application.
I have selected both (Contacts and Phone) applications and it doesn't activate AOD when I have a missed call
i have stock apps. for missed calls, i did the 3rd profile with phone missed call event. last night i had a missed call , but with a whatsapp message, and i thought that the profile is good. but today i checked it, and it doesn't work without a separate profile.
dracushor87 said:
i have stock apps. for missed calls, i did the 3rd profile with phone missed call event. last night i had a missed call , but with a whatsapp message, and i thought that the profile is good. but today i checked it, and it doesn't work without a separate profile.
Click to expand...
Click to collapse
OK I found the missing part... You need to also add 'Calling Accounts' apart from Phone app.
Here are the steps how to add this:
1. Click on the 'Owner Application'
2. click 'ALL' button at the right bottom corner
3. Select 'Calling Accounts'.
4. click back twice and tick to save changes.
Now you can exit Tasker and check if AOD kicks in when you have a missed call. Would be good to hear from others if this works fine, but it works for me fine.
@martmarq can you please add it to OP once other confirm if this works for them?
dracushor87 said:
i have stock apps. for missed calls, i did the 3rd profile with phone missed call event. last night i had a missed call , but with a whatsapp message, and i thought that the profile is good. but today i checked it, and it doesn't work without a separate profile.
Click to expand...
Click to collapse
Thanks, will update the first post again
i confirm it works
vitoski said:
OK I found the missing part... You need to also add 'Calling Accounts' apart from Phone app.
Here are the steps how to add this:
1. Click on the 'Owner Application'
2. click 'ALL' button at the right bottom corner
3. Select 'Calling Accounts'.
4. click back twice and tick to save changes.
Now you can exit Tasker and check if AOD kicks in when you have a missed call. Would be good to hear from others if this works fine, but it works for me fine.
@martmarq can you please add it to OP once other confirm if this works for them?
Click to expand...
Click to collapse
Many thanks... I always thought ALL mean activate all Apps... never pressed that button before...:cyclops:
It works, I will add that.
Hello, thanks for you post.
Just a question : It's juste for AOD without cover or witch official cover it's working too ?
It's too bad the screen power off with official cover ....
Dumb question here.... Do we need root for this to work ?
shagratt said:
Dumb question here.... Do we need root for this to work ?
Click to expand...
Click to collapse
No.
matdu57 said:
Hello, thanks for you post.
Just a question : It's juste for AOD without cover or witch official cover it's working too ?
It's too bad the screen power off with official cover ....
Click to expand...
Click to collapse
I am not using any cover. I don't know what the cover does. Sorry for not being more helpful here.
Not quite working for me (US997)... I have every thing all set up, but my Tasker notification says "No profiles activated". Any ideas?
calebcbump said:
Not quite working for me (US997)... I have every thing all set up, but my Tasker notification says "No profiles activated". Any ideas?
Click to expand...
Click to collapse
A tasker profile is only activated when it is triggered.
If you produce a profile like "active between 8 o'clock and midnight" does that work for you?
martmarq said:
A tasker profile is only activated when it is triggered.
If you produce a profile like "active between 8 o'clock and midnight" does that work for you?
Click to expand...
Click to collapse
Yes, it does. The AOD_off profile works, but I can not get AOD_on to trigger with an app notification, I have verified that I have the app selected for a trigger.