My Samsung Galaxy S3 Has been stuck on the 'Samsung Galaxy S3 GT-19300' logo, and i have tried just about everything to fix this, i tried factory reset, i have tried to root it, i tried installing a firmware, and none of this has helped...
It used to be stuck on the SAMSUNG logo because i used this font program that i downloaded, but now, it doesnt even pass the 'Samsung Galaxy SIII Gt-i9300' logo. PLEASE HELP !
You're soft bricked... if you have a custom recovery flash a new ROM or use Odin to flash back to stock firmware.
Sent from my SPH-D710 using xda premium
Mattix724 said:
You're soft bricked... if you have a custom recovery flash a new ROM or use Odin to flash back to stock firmware.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
when i try to install the firmware it doesnt say SYSTEM on odin, it says RECOVER
Not sure if it's the same as the S2 but for my device it's volume down and power to boot into download mode. Then connect to Odin and flash a stock tar file.
Sent from my SPH-D710 using xda premium
---------- Post added at 10:38 PM ---------- Previous post was at 10:33 PM ----------
http://www.android.gs/download-mode-galaxy-s3/
After entering download mode, open Odin, plug in the USB, click PDA, select a stock tar for your version of the S3, then click start.
Just make sure you have a tar for your variant so that you don't flash the wrong bootloader and end up with something that needs to be JTAG'd in order for USB to be recognized by the computer.
Sent from my SPH-D710 using xda premium
Not to worry, i fixed it ! all that had to be done, was like you said, flash stock, odin was just messing up a little last time, but, thanks !
Related
Hi there,
I had Cyanogenmod 7 installed on my unbranded Galaxy S2 up until yesterday where I got stuck in a never ending (or at least >30mins) bootloop on the Cyanogenmod splash screen.
Not having access to the internet at that point, I tried a few things including flashing a different kernel onto it using Odin, complete reset, and now it's stuck on the Galaxy S II splash screen.
It is still recognised when I connect it via USB, and can access the download mode and Android system recovery, but to be honest I have no idea how to proceed from here.
Have I bricked it?!
Thanks for any help.
Try flashing original Samsung stock firmware,I had this issue yesterday and only stock firmware resolved my problem.
Sent from my GT-I9100 using xda premium
Which firmware did you use? XXKI4 isn't working for me.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
I get the stock recovery mode when I boot. I have flashed the two kernels I had saved on my laptop (the insecure and stock ones I used when rooting) through Odin and still get stuck at the Galaxy S II Boot screen...
condieboy said:
Which firmware did you use? XXKI4 isn't working for me.
Click to expand...
Click to collapse
Go to sammobile and search for your
Firmware, download it and flash via Odin. Worked for me.
Sent from my GT-I9100 using xda premium
condieboy said:
I get the stock recovery mode when I boot.
You require a root and CWM install to use Clockwork Recovery .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
bubba949 said:
Go to sammobile and search for your
Firmware, download it and flash via Odin. Worked for me.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Massive e-props! After one wrong firmware, second shot got the job done!
Thanks a lot for all the help!
Glad to hear it.
Sent from my GT-I9100 using xda premium
I recenlty installed CM10 latest and all worked fine . Today i decided to change the Kernel . I picked SiyahKernel S3 v1.7b6 but because i wasnt patient i installed the kernel not for i9300 model ...but for i900 galasy s .
I know that was a stupid mistake . Is their any change to bring my phone to life again .
Now it only stacks at Logo : Samsung Galaxy s3 i9300 ...and nothing after that .................
Any help will be valuable.
Thanks a lot
Try flash the correct kernel again. If it still stuck, then factory reset and reflash whole rom again.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Try flash the correct kernel again. If it still stuck, then factory reset and reflash whole rom again.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I cannot boot to recovery mode how can i flash correct kernel ?
Then u have to try flash kernel (.tar) with odin.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Then u have to try flash kernel (.tar) with odin.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
As i reallize for what you are saying i have to do it with odin via USB . Thats not an option . I cannot boot into Caynogen . I cannot pass the stage with the logo
"Samsung Galaxy s3 i9300" this logo it stucks there i cant even go to the next logo "Samsung" with the animation of the cyrcle !
pull your battery out, leave for 5 mins, reinsert, and try getting into recovery with three button combo again
slaphead20 said:
pull your battery out, leave for 5 mins, reinsert, and try getting into recovery with three button combo again
Click to expand...
Click to collapse
You think whatever the problem is i had to always be able to go to recovery mode ?
And thanks for for help !!!!!
You don't need the cm logo to show up when trying to get into download mode.
Press down home and power button. Connect to odin via usb, and flash the tar siyah kernel.
Sent from my GT-I9300 using xda premium
xcly said:
You don't need the cm logo to show up when trying to get into download mode.
Press down home and power button. Connect to odin via usb, and flash the tar siyah kernel.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I dont tell sothing aout cm logo ..i am telling about samsung logo ....a lot before cm logo.. I i am stack in SAMSUNG Glaxy s3 GT-I9300 logo
xcly said:
You don't need the cm logo to show up when trying to get into download mode.
Press down home and power button. Connect to odin via usb, and flash the tar siyah kernel.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks i got to download mode and now i flashed the correct kernel and all went good .
Thanks a lot guys !!!!!
I soft bricked my phone and I flashed the official firewall via odin but now my device is stucked to the samsung start screen. what do I do now?
Ciakou said:
I soft bricked my phone and I flashed the official firewall via odin but now my device is stucked to the samsung start screen. what do I do now?
Click to expand...
Click to collapse
You flashed a FIREWALL through Odin does not make any sense at all .
What have you flashed .
Boot to recovery and factory reset .
jje
make a factory reset from recovery mode. you'll be good to go.
sent from my GT-I9300 using iOS 7
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
that's actually firmware I think. auto correction
sent from my GT-I9300 using iOS 7
Ciakou said:
I soft bricked my phone and I flashed the official firewall via odin but now my device is stucked to the samsung start screen. what do I do now?
Click to expand...
Click to collapse
Flash the stock rom !
please give me thanks
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the official firmware from sam mobile.com. But can't Flash through Odin and it is showing write failed in odin. I have a backup of CWM in my SD but to flash it CWm recovery in my phone is not working.
Help me Please............
thanks in adavnce...........
4uavk96 said:
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the official firmware from sam mobile.com. But can't Flash through Odin and it is showing write failed in odin. I have a backup of CWM in my SD but to flash it CWm recovery in my phone is not working.
Help me Please............
thanks in adavnce...........
Click to expand...
Click to collapse
Try this let me know what happens
Step 1
1. Flash with ODIN v3.07(Stock Rom Any region) use admin mode for running odin
2. only(PDA , CSC , Modem along with PIT file)
Now if everythinf works fine & download mode is working follow step 2 ( phone will still bootloop don't worry about it but be sure to check if recovery or anything else works after this )
Step 2 :
1. again Flash with ODIN v3.07(Same stock
Firmware used in step 1)
2. now only(Bootloader , CSC , Modem ,PDA) No
PIT File(Important)
Use this pit file dl.xda-developers.com/attachdl/f218...5a8f7a/51ee1c11/1/8/0/4/9/6/1/totoro_0623.rar not official samsung that you got with stock firmware
This should work if not let me know
Sent from my GT-I9082 using xda premium
---------- Post added at 11:44 AM ---------- Previous post was at 11:41 AM ----------
Note if phone boots in recovery after step1 just clear cache & factory reset & check if that works if yes no need for step 2 :thumbup:
Sent from my GT-I9082 using xda premium
Thanks for the response.
I downloaded the official firmware from sammobile.com and when I try to flash through Odin it says write failed!
(I don't know if this is happening because of the usb debugging is not checked in the phone)
I used same Odin which I used to flash my grand with!
Actually the problem started after flashing a Rom from cwm recovery
I wiped the cache and factory reset my device in cwm! And install zip from sd and it installed as usual!
But it got stuck at the start screen.
I get the device name and model only on start screen, and nothing after that!
Now after pressing vol up+power+home no android recovery comes or no cwm recovery comes!!!
Phone is still in 0 binary and Samsung official!!
My only problem is if I hold recovery keys it just reboots again n again!
If I hold download mode keys it boots into download mode but Odin refuses to write the stock Rom
.
Thanks in advance
I am in need of ur help.
Help me please
Sent from my GT-I9082 using xda premium
4uavk96 said:
Thanks for the response.
I downloaded the official firmware from sammobile.com and when I try to flash through Odin it says write failed!
(I don't know if this is happening because of the usb debugging is not checked in the phone)
I used same Odin which I used to flash my grand with!
Actually the problem started after flashing a Rom from cwm recovery
I wiped the cache and factory reset my device in cwm! And install zip from sd and it installed as usual!
But it got stuck at the start screen.
I get the device name and model only on start screen, and nothing after that!
Now after pressing vol up+power+home no android recovery comes or no cwm recovery comes!!!
Phone is still in 0 binary and Samsung official!!
My only problem is if I hold recovery keys it just reboots again n again!
If I hold download mode keys it boots into download mode but Odin refuses to write the stock Rom
.
Thanks in advance
I am in need of ur help.
Help me please
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
What version odin are you using
For old handset's use v1.85 or similar
Latest odin does not work properly with galaxy y / ace series
Sent from my GT-I9082 using xda premium
Thanks it worked
What an Idea sirji
Thank you
I am a fan of yours from now!!!
Thanks a lot:thumbup:
Sent from my GT-I9082 using xda premium
4uavk96 said:
Thanks it worked
What an Idea sirji
Thank you
I am a fan of yours from now!!!
Thanks a lot:thumbup:
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Bro change title to solved :thumbup:
Sent from my GT-I9082 using xda premium
Ya sure
Sent from my GT-I9082 using xda premium
4uavk96 said:
Thanks it worked
What an Idea sirji
Thank you
I am a fan of yours from now!!!
Thanks a lot:thumbup:
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
how did you do it?? can you please tell me step by step?
Please give me a step by step tutorial that how you did that?
boot loop problem in iball andi 4.5q
Dear XDA admin,
last week i rooted my device. I tried to install font found in system folder by using ifont app. After the restart, mobile got stuked into the animation screen, not going further. After searching internet, i did removing battery & insert battery after 30s, wipe cache/factory reset, wipe partition. After did all the things, my phone got stucked into animation screen. i'm a noob. i dont have much ideas about android hacking so that i didnt install any TWRP &CWM recovery. i didnt take backup also. when i hold vol + , Power & Home button, mobile go into android system recovery <3e>, here i tried to update rom got from xda, but it said installation aborted. After i installed adb tools, mobile responding the adb. From adb sideload i sent rom to mobile., but after reboot again it stucked into animation screen. so please kindly help me to rectify this problem.:crying::crying::crying::crying:
my mobile iball andi 4.5q
MT6577
512MB ram
regards
rafiq
[email protected]
please help the link is not working... my problem is same the the first post (
SOLVED!!!
Hello, guys, i've finally made it!
Worked for me with firmware S6102XELAA (got from firmware.sgh.ru )
Used Odin3 v1.85
Try this combination
Samsung phone doesn't boot up!
My Samsung GT-I9082 stopped booting while trying to upgrade to OS 4.2. It cannot boot into recovery mode, but can enter the download mode. The samsung (first pop up screen) just keep blinking when I turn on the phone. Don't know what to do. I need your help please. Thanks house.
plz help me i am stuck on the first screen when i tried installing ios ROM for y but my device was y duos so it didn't run then I tried to go back using nandroid backup trying new Roms but couldn't ago further i had boot loops too. I only know the basics learned from the internet and also my battery wont charge it shows the battery and the loading animation in it but it wont go any further Plz help me..
Thanks in advance
Hello,
I was trying to back from CM to stock rom on my Samsung Galaxy Ace GT-S5830i.
First I used a ODIN 3.09 found on XDA, but this failed writing rom to my phone.
Then I used v3.07, flashing with rom worked for me, but phone stucks on bootloaders startup logo, no contact over usb to PC, nothing happens.
So I tried wipe all data from phone memory, repartition using PIT file found on XDA, write bootloader (also from XDA), system image from sammobile.com, nothing helps, only i can do with phone is launch download mode, nothing more..
Please, can somebody help?
I'm attaching bootloader and PIT that i used to flash my phone. ROMs that i used - S5830IXXLC2_S5830IPRTLC1_PRT (originally this was on phone) and S5830IXXLB2_S5830ILUXLB1_LUX (this matched with bootloader i was found)
psycho.bfq said:
Hello,
I was trying to back from CM to stock rom on my Samsung Galaxy Ace GT-S5830i.
First I used a ODIN 3.09 found on XDA, but this failed writing rom to my phone.
Then I used v3.07, flashing with rom worked for me, but phone stucks on bootloaders startup logo, no contact over usb to PC, nothing happens.
So I tried wipe all data from phone memory, repartition using PIT file found on XDA, write bootloader (also from XDA), system image from sammobile.com, nothing helps, only i can do with phone is launch download mode, nothing more..
Please, can somebody help?
I'm attaching bootloader and PIT that i used to flash my phone. ROMs that i used - S5830IXXLC2_S5830IPRTLC1_PRT (originally this was on phone) and S5830IXXLB2_S5830ILUXLB1_LUX (this matched with bootloader i was found)
Click to expand...
Click to collapse
Please use Q&A section next time .
If your phone is stuck at boot logo startup, go to recovery, and wipe data and wipe cache partition .
You will see when it's normally , dont worry .
Sent from my GT-P3100 using XDA Premium 4 mobile app
---------- Post added at 12:18 PM ---------- Previous post was at 12:12 PM ----------
RevolutionBolt said:
Please use Q&A section next time .
If your phone is stuck at boot logo startup, go to recovery, and wipe data and wipe cache partition .
You will see when it's normally , dont worry .
Sent from my GT-P3100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If it show "Error mounting /data" in recovery mode after wipe data, please download XXLK1 stock rom firmware . Just search it by Googling .
Sent from my GT-P3100 using XDA Premium 4 mobile app
psycho.bfq said:
(...) only i can do with phone is launch download mode, nothing more.. (...)
Click to expand...
Click to collapse
I can't go into recovery!
psycho.bfq said:
I can't go into recovery!
Click to expand...
Click to collapse
What firmware that you used it for your phone currently? Maybe XXLK1 will help, I guess. And also don't tick repartition if you using pit. file but unless if you using it. Just optional as you wamt to use pit. file.