Related
Hi,i recently flashed cyanogenmod to my XMP,but it is rather unstable,so i would like to return to stock ICS 4.0.4
I tried using flashtool to flash the stock rom but when it asks me to unplug the device,turn it off,and plug it in flashmode,i do it and it doesn't respond. The green light on the device turns on,but flashtool behaves like i didn't plug the divice.
Any help?
Forgot to mention,stupid that i am,i never did a backup before installing cyanogenmod.
Regular_John said:
Hi,i recently flashed cyanogenmod to my XMP,but it is rather unstable,so i would like to return to stock ICS 4.0.4
I tried using flashtool to flash the stock rom but when it asks me to unplug the device,turn it off,and plug it in flashmode,i do it and it doesn't respond. The green light on the device turns on,but flashtool behaves like i didn't plug the divice.
Any help?
Forgot to mention,stupid that i am,i never did a backup before installing cyanogenmod.
Click to expand...
Click to collapse
Have you got flashtool drivers installed? (flashtool installation folder > drivers)
So the green led comes up while you hold volume down and plug to pc without pressing power on just holding volume down and connect?
But flashtool doesn't recognize?
Can you flash a kernel? Does flashtool detect your device in fastboot mode?
Do you use the latest flashtool version?
Have you got flashtool drivers installed? (flashtool installation folder > drivers)
Click to expand...
Click to collapse
yep got the drivers installed.
So the green led comes up while you hold volume down and plug to pc without pressing power on just holding volume down and connect?
But flashtool doesn't recognize?
Click to expand...
Click to collapse
Yes.
Can you flash a kernel? Does flashtool detect your device in fastboot mode?
Click to expand...
Click to collapse
No,i cant' flash a kernel either,it says "ERROR - This action can only be done in fastboot mode",even when my device is connected in fastboot mode.
Do you use the latest flashtool version?
Click to expand...
Click to collapse
got the latest flashtool (0.9.6 ,had 0.9.2) but still the same.
Regular_John said:
yep got the drivers installed.
got the latest flashtool (0.9.6 ,had 0.9.2) but still the same.
Click to expand...
Click to collapse
After installing 0.9.6 install the drivers for all devices again, restart pc and try it again. If your phone connects in flashmode normally it should be a problem of flashtool, cause the phone enters flashmode correctly then. Be sure pc companion or sony update service aren't running in background!
still the same.
so, the problem would be that flashtool does not recognize my device,even though i have all drivers installed.
i guess i'll have to stick around with cm9 for now.
Use pcc
Sent from my E15i using Tapatalk 2
pcc won't work, i have cyanogenmod with unlocked bootloader.
Check you have usb debugging and marked unknown resources. Other than that try to install the flashtool again. Download the drivers again from the web.
Sent from my SK17i using xda premium
maybe try back to Gingerbread..... on my active fastboot is volume up....and blue led. volume down is download mode and green led....maybe here is problem
Its simple...
1. Flashtool Method...if its not working then proceed to 2
2. Flash another kernel like MESA v1.8 http://www.dropbox.com/sh/w6v6t0a72eh3n3k/I61LnlJJK7/sk17i_mini_pro
3. WIPE DATE/WIPE CACHE/FACTORY RESET/DALVIK CACHE(Whatever)
4. Flash a rom like Smultronic v3.5(ITS STOCK BASED ROM) by entering in recovery http://forum.xda-developers.com/showthread.php?t=1796272
5. Its a very good rom...but if you still not satisfied then now try the flashtool procedure...
---------- Post added at 10:32 AM ---------- Previous post was at 10:28 AM ----------
Many times it has happened with me also...flashtool doesnt recognize my XM so what i do is...
1. Select file to be flashed in flashtool in Flash Mode
2. Select everything..wipe data...wipe system...etc and den press the OK
3. Its says"Connect Device by...."
4. Power oFF the phone...
5. Connect the USB side to Pc...and before connecting the microUSB to phone hold the Volume down button and do not leave it till the flashing starts....
Try this and report back...
Regards,
Hit Thanks If I Helped YOu:fingers-crossed:
Hi, first of all, sorry about my english. I think it's terrible.
I have a SE WT19 stuck on FXP bootloop.
I had installed a custom kernel, but i guess i did something wrong.
At first, my cellphone is on bootloop (in some custom ROMs) or just on black screen.
So, i tried to flash a new kernel with flashtool, or a stock Rom with PCCompanion, but my device is not recognized by Windows 7.
Also is not recognized by Linux, or Mac.
The kernel that bricked my LWW was wt19i-live-rage2.7-kernel-for-fxp-cm7.
There is something possible to bring it alive again?
Ever uninstall and install all drivers and tried in another pc, aways shows the same message.
"One of the USB devices attached to this computer is not working properly, and Windows does not recognize it. For assistance in solving this problem, click this message." :crying: :crying:
rsmaster said:
Hi, first of all, sorry about my english. I think it's terrible.
I have a SE WT19 stuck on FXP bootloop.
I had installed a custom kernel, but i guess i did something wrong.
At first, my cellphone is on bootloop (in some custom ROMs) or just on black screen.
So, i tried to flash a new kernel with flashtool, or a stock Rom with PCCompanion, but my device is not recognized by Windows 7.
Also is not recognized by Linux, or Mac.
The kernel that bricked my LWW was wt19i-live-rage2.7-kernel-for-fxp-cm7.
There is something possible to bring it alive again?
Ever uninstall and install all drivers and tried in another pc, aways shows the same message.
"One of the USB devices attached to this computer is not working properly, and Windows does not recognize it. For assistance in solving this problem, click this message." :crying: :crying:
Click to expand...
Click to collapse
First of all its not bricked..there are several information missing.Is your phone rooted & boot loader unlocked?With which rom did u try FXP kernel?Chech if u have the latest flashtool installed. Then go to driver folder & download the latest drivers. Connect ur phone in fastboot mode it should install the necessary drivers
saqib nazm said:
First of all its not bricked..there are several information missing.Is your phone rooted & boot loader unlocked?With which rom did u try FXP kernel?Chech if u have the latest flashtool installed. Then go to driver folder & download the latest drivers. Connect ur phone in fastboot mode it should install the necessary drivers
Click to expand...
Click to collapse
My phone was rooted and unlooked bootloader. I tried ALL CM7/9/10 roms posted in the xda development forum. I have the latest flashtool installed, also the latest drivers. When I connect my phone in fastboot or in flash mode, nothing happens,, cause my pc (and flashtool) do not recognize the device.
Okay but what happens when u connect ur phone to pc while pressing vol up button(without running flashtool)?does the blue led show & pc doesn't recognize it?if yes then go to device manager on my computer & see whats the problem with ur device,try installing it from there.Another question,can u get into CWM?
saqib nazm said:
Okay but what happens when u connect ur phone to pc while pressing vol up button(without running flashtool)?does the blue led show & pc doesn't recognize it?if yes then go to device manager on my computer & see whats the problem with ur device,try installing it from there.Another question,can u get into CWM?
Click to expand...
Click to collapse
When I press Up, turns on the blue led.
When I press Down, turns on the green led.
Device Manager displays: Unknow Device, and say I'm using the latest drivers, and something about Code 43 wrong.
I can get into CWM.
Nice then ur phone is perfectly okay :good:
just try another pc
or
unistall all related to ur device(flashtool,drivers,android sdk,pc companion,google usb) & reinstall.If that even don't work I suggest u to do a fresh install of windows.
See if it's a problem with the USB port. Are other devices connected to that port recognized? Some of the USB ports in the old PC at my home keep showing that message whatever I connect to it
saqib nazm said:
Nice then ur phone is perfectly okay :good:
just try another pc
or
unistall all related to ur device(flashtool,drivers,android sdk,pc companion,google usb) & reinstall.If that even don't work I suggest u to do a fresh install of windows.
Click to expand...
Click to collapse
Thnks..
I'll try it :fingers-crossed:
havocgb said:
See if it's a problem with the USB port. Are other devices connected to that port recognized? Some of the USB ports in the old PC at my home keep showing that message whatever I connect to it
Click to expand...
Click to collapse
The other device connected works fine...
Might be the phone's micro USB port is faulty???
Sent from my Xperia Mini using xda app-developers app
rsmaster said:
When I press Up, turns on the blue led.
When I press Down, turns on the green led.
Device Manager displays: Unknow Device, and say I'm using the latest drivers, and something about Code 43 wrong.
I can get into CWM.
Click to expand...
Click to collapse
The phone doesn't seem to be bricked. Try using Flashtool on another computer. Make sure you do have those fastboot drivers(when you first connect your phone to Flashtool in fastboot mode, Flashtool gives you a notification that drivers need to be installed for the device. I confirm that the ones provided in C:\Flashtool\drivers work for LWW )
(Always make sure the kernel is compatible with the ROM you're trying to flash)
Start with the stock kernel(the one provided inside the CM7/CM9 zip - boot.img). Then flash the relevant ROM and see what happens. Once that works fine, start tinkering with various kernels out there.
Don't worry, it's just a soft brick
I haven't bricked my WT19 yet but I did soft brick my former X8 and Someone else's Galaxy something...
What I can advise you do is flash the whole stock .ftf ROM from Sony, just search for the 4.1.B.0.587 firmware, flash it and start from scratch.
About your pc not recognizing your phone: how then did you flash the kernel?? Do have the Sony PC Companion installed on your machine? I have it just for the driveers, I know Flashtool comes with them but I rather have the offiicial somethimes... I think MediaGo also comes with them.
Anyhow, I hope you can get your phone working. Let us know how it went
gouthamthemostwanted said:
Might be the phone's micro USB port is faulty???
Sent from my Xperia Mini using xda app-developers app
Click to expand...
Click to collapse
Micro USB port works fine too.
Hi guys,
All tests done.
Other pc, or OS, do not recognize my device.
Tried another notebook, tried another windows version, another Linux and MacOS, nothing works!!
So, this process of kernel change could cause some hardware damage?
I really can't change the kernel in cwm recovery?
Just to recall, I can change the battery, got the phone in fasboot/flash mode, got CWM working, install new ROM but, or finish with bootloop or with black screen.
fragas16 said:
I haven't bricked my WT19 yet but I did soft brick my former X8 and Someone else's Galaxy something...
What I can advise you do is flash the whole stock .ftf ROM from Sony, just search for the 4.1.B.0.587 firmware, flash it and start from scratch.
About your pc not recognizing your phone: how then did you flash the kernel?? Do have the Sony PC Companion installed on your machine? I have it just for the driveers, I know Flashtool comes with them but I rather have the offiicial somethimes... I think MediaGo also comes with them.
Anyhow, I hope you can get your phone working. Let us know how it went
Click to expand...
Click to collapse
-About your pc not recognizing your phone: how then did you flash the kernel??
-My pc recognized until the latest kernel. After the new kernel, my problems begun.
I have PC Companion installed in my machine. Don't recognizes too.
One more time, sorry about the english mistakes.
I just speak portuguese^^
But I'm trying some comunication!!!
Format your Computer
Then to go http://forum.xda-developers.com/showthread.php?t=1799786 .... Next go to download PC SUS service update last version.... then install ... install too PC companic.... Next Installl flashtools next install Drivers on the folder Drivers Flashtoools.....
Next go to SUS service UPDATE and select your model device. then click Next.... |THENn Conect your device on modo flash modo...... Thennnnnn not go next step... Go oper Flastools and try flash file .tft Stock ROM.
I Have A SE LWW and i do the downgrafe to GB and then i root it...after that i go to PC Companion And I Do The Update That It Said...After That...I Lose My Root...I Have GB And Now Doesn't Appear The ICS Update....Can Anyone Help Me With This??? :crying::crying::crying::crying:
Johnyx1 said:
I Have A SE LWW and i do the downgrafe to GB and then i root it...after that i go to PC Companion And I Do The Update That It Said...After That...I Lose My Root...I Have GB And Now Doesn't Appear The ICS Update....Can Anyone Help Me With This??? :crying::crying::crying::crying:
Click to expand...
Click to collapse
just flash stock ftf of ICS 4.1.B.0.587 then get rooted. There are quite a lots of guide & links where you can get help from. In general & Q& A Threads
Are you connecting it to a USB 3.0?
Sent from my ST18i using xda app-developers app
IronBlossom said:
Are you connecting it to a USB 3.0?
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
no...
---------- Post added at 09:58 PM ---------- Previous post was at 09:42 PM ----------
saqib nazm said:
just flash stock ftf of ICS 4.1.B.0.587 then get rooted. There are quite a lots of guide & links where you can get help from. In general & Q& A Threads
Click to expand...
Click to collapse
can u help me with links?
Hello guys, i need help ..
I wanted flash this custom ROM on my LwW, so I rooted device, installed CWM, unlocked bootloader, wiped data/cache/dalvik and flash it. But now is phone lagged on boot screen (ŠONY logo) ... i cant go to CWM, when i want restore via SUS, it says: The phone contains modified software that cannot be updated; and flashtool lags in flash process in text - Reading device information.
Can I do anything? Please help. :crying: thanks
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
I two days ago we had many problems with Flashtools ... In the middle of Flashing the device stopped working always the same error 31. I tried for over 30 vezez and sometimes not recognize the computer. Oh I did so I removed the battery from the phone and I slept early the other day when I woke up I was flashing again and it was the first time I was really surprised. I ran back to Stock GB Rom with kernel bboof ....
Good ! :beer::thumbup:
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
deryck.vyhybkar said:
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
Click to expand...
Click to collapse
Which kernel you are using ?
did you wiped everything before installing custom rom ?? (data,system, cache, dalvik cache)
Hi guys,
I'm not an Android expert, but AFAIK is a Linux system.
I'm quite familiar with Unix/Linux world and wondering if there's a way to see the messages during boot just like on a console?
I'm asking, beacause my ray hangs at sony-ericsson logo, and can't figure out what's wrong with it.
Thank you!
to solve problem .. flash your stock .ftf again with flashtool
Well u can use adb for that...use adb logcat...search in xda if u don't know how to use adb...it will give u a complete log as u need
Cheers,
AJ
Mohamed Hashem said:
to solve problem .. flash your stock .ftf again with flashtool
Click to expand...
Click to collapse
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
nroberto13 said:
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
Click to expand...
Click to collapse
i think usb debug will not work anyway if ur phone powered off
try to flash custom kernel again , then u will have CWM , then remove your SD Card and put it in reader , then put any ROM in it , then put it again in ur phone , then flash it with CWM , i made that before with CM ROM & it worked :good:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
nroberto13 said:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
Click to expand...
Click to collapse
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
mihahn said:
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I flashed a custom rom.
Actually, i was on ICS, and wanted to try custom GB illuminative.
Flashed the v10, everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash some times the rom without issues, but the last was unlucky .
By that time, my BL was locked, so I had to root my phone to install cwm.
Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the process over and flashed GB .42, rooted with doomlord, script, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
basically these were the steps I was doing, and after a cwm flash of the custom rom, the phone ended hanging at sony logo.
I then tried different kind of stock firmwars ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flash a version of the illuminative custom rom which was working before, but still the sam. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same.
now, cwm is gone, as stock kernel overwrote the custom one.
That's the story .
As i remember i can enable usb debug even phone not boot to system. By charging phone with pc(not standard charger) then hold power button and at windows(or else) will ask for driver
Ps. I did that with X8, didn't know with 2011's phone.
Sent from my ST27i using xda app-developers app
Hmm okay you could try to flash the unbricking ftf (you can find it in someguyfromhell's sticked thread) and afterwards stock gingerbread or ics again, but I don't know if that could work or maybe make it even worse (normally it's to unbrick if you did an ota update on unlocked bootloader, but let's see). Maybe it's worth a try
The problem about cwm that's gone: if you are still able to boot into fastboot mode, you can flash another kernel and for example try to install cyanogenmod or any other rom. Just try cm10 or cm10.1. Maybe in the end a rom will boot
Sent from my SK17i running stock ics (.587)
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
nroberto13 said:
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Click to expand...
Click to collapse
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
eswawan said:
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
yes, it goes to offline charging mode!
mihahn said:
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
nroberto13 said:
yes, it goes to offline charging mode!
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
Click to expand...
Click to collapse
With the procedure I posted above it shouldn't simply boot to offline charging mode, so maybe it is a driver problem. Try it step by step like posted above, maybe it could work. If not it was worth a try
Sent from my SK17i running stock ics (.587)
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
PS. not sure if it's right, but when I connect the phone to pc, connects in flash mode, even if I don't hold vol down, the notification led is solid green, then the led turns off, Sony Ericsson appears, then the battery with the power sign and finally notification led turns orange. when I short press power button now, the battery with power sign shows up on screen.
nroberto13 said:
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
Click to expand...
Click to collapse
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
mihahn said:
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Sorry, I think I wasn't clear enough. I thought I should be connecting the phone without holding any of the volume buttons, just to try if it's charging in offline mode. Here's the exact status.
1. If I do not hold any volume buttons, the phone goes into flash mode ( solid green led ), and after a short while ( 20-30 sec ) led turns off, Sony Ericsson logo shows up, then goes away and battery with power sign is displayed when I short press the power button
2. if I hold vol down, phone behaves the same way as at 1.
3. if I hold vol up, phone goes in fastboot mode ( solid blue led ) and stay solid blue, it is not going into charging mode.
Abhinav2 said:
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
Click to expand...
Click to collapse
I may not be clear enough here either. I didn't use sus after unlocking BL, I know it bricks he phone, anyway, I did flash the unbrick ftf mentioned by mihahn. here are the steps I did so far :
1. I was on ICS ( Iced Bean 3.4 ) , with BL lockedand phone rooted and wanted to try custom GB illuminative.
2. I flashed the rom with cwm, and everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash the rom several times, without issues, but the last was unlucky .
3. Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the rooting process over and flashed GB .42, rooted with flashtool, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
4. and after a cwm flash of the custom rom, the phone ended hanging at sony ericsson logo.
5. I then tried different kind of stock firmwares ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
6. afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flashed a version of the above mentioned GB illuminative custom rom which was working before, but still the same.
7. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same, now, cwm is gone, as stock kernel overwrote the custom one.
8. tried to flash someguyfromhell's unbrick ftf, which is for the FOTA brick whith BL unlocked, as I understood.
9. reflashed stock GB .42 with flashtool, but phone still hangs at sony Ericsson logo.
In this status, could I connect to the phone using adb, so I could do a adb logcat ?
If so, please advise how.
Thanks.
@nroberto13 Do you mind telling us which ftfs u flashed?
Cheers,
AJ
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
instal flashtool and drivers from the folder inside the zip, and then flash stock rom.
Mysteryagr said:
instal flashtool and drivers from the folder inside the zip, and then flash stock rom.
Click to expand...
Click to collapse
im'trying but pc now can't recongized phone,yuo can see images
madjacky said:
im'trying but pc now can't recongized phone,yuo can see images
Click to expand...
Click to collapse
Well. when this happen to me. I install different copy of windows or try from different pc
madjacky said:
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
Click to expand...
Click to collapse
connect in flashmode?
or try to flash ics stock
guide in my signeture
noob to extreme user guide!
prantoroy said:
connect in flashmode?
or try to flash ics stock
guide in my signeture
noob to extreme user guide!
Click to expand...
Click to collapse
no can't connect in flashmode,pc can't recognized device
madjacky said:
no can't connect in flashmode,pc can't recognized device
Click to expand...
Click to collapse
without flashmode or fastboot.
u r in trouble.
only way is to contact service.
prantoroy said:
without flashmode or fastboot.
u r in trouble.
only way is to contact service.
Click to expand...
Click to collapse
any ideas why could such a problem?
madjacky said:
any ideas why could such a problem?
Click to expand...
Click to collapse
How did you try to enter flashmode?
Install all drivers from flashtool>drivers for all modes/devices. Then you take out the battery of your phone and reinsert it. Now press and hold volume down and connect the usb. Don't power the phone on, just press volume down and connect. The green led should light up and you are in flashmode
Then you can flash the stock rom using flashtool :good:
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
How did you try to enter flashmode?
Install all drivers from flashtool>drivers for all modes/devices. Then you take out the battery of your phone and reinsert it. Now press and hold volume down and connect the usb. Don't power the phone on, just press volume down and connect. The green led should light up and you are in flashmode
Then you can flash the stock rom using flashtool :good:
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
i'm installing all drivers but when i hold volume down and connect to pc led is green but pc can't rekognized usb device
madjacky said:
i'm installing all drivers but when i hold volume down and connect to pc led is green but pc can't rekognized usb device
Click to expand...
Click to collapse
Is the device marked as "unknown devices" or what happens when you connect?
mihahn said:
Is the device marked as "unknown devices" or what happens when you connect?
Click to expand...
Click to collapse
yes , device marked as unknow devices when i'm connecting phone to pc
mihahn said:
Is the device marked as "unknown devices" or what happens when you connect? [/QUOTE
you can see on images
http://forum.xda-developers.com/showthread.php?t=2382151
Click to expand...
Click to collapse
Try on another pc...
Or
Reinstall windows ...connect phone to windows and patiently wait for drivers to be installed using windows update service via internet...
After that put device in flash/green LED mode ,then patiently wait for flash mode drivers to be installed ...
Use flashtool or update service to go back to stock ROM
This is a windows issue so the thumb rule is "reboot windows,try on another windows,reinstall windows.."
madjacky said:
mihahn said:
Is the device marked as "unknown devices" or what happens when you connect? [/QUOTE
you can see on images
http://forum.xda-developers.com/showthread.php?t=2382151
Click to expand...
Click to collapse
dude if u connect with flash /fastboot mode it will DONT SHOW ur device but u have the ability to flash images (rom, kernel) onto phone if u get into fastboot, (blue led) flash new kernel using cmd method (no tools programs, just old fashioned )
if u get into fastboot the only open flashtool select ur flash stuff, it will tell u turn off phone , do this than connect it via flashmode (green led, flashtool should be flashin -..)
also i see sony bootlogo that means u hav a custm kernel and ur probably on UNLOCKED bootloader??? did u ever tried get to your recovery??? (pressing volume down continusly when boot up?????)
Click to expand...
Click to collapse
bejunk said:
madjacky said:
dude if u connect with flash /fastboot mode it will DONT SHOW ur device but u have the ability to flash images (rom, kernel) onto phone if u get into fastboot, (blue led) flash new kernel using cmd method (no tools programs, just old fashioned )
if u get into fastboot the only open flashtool select ur flash stuff, it will tell u turn off phone , do this than connect it via flashmode (green led, flashtool should be flashin -..)
also i see sony bootlogo that means u hav a custm kernel and ur probably on UNLOCKED bootloader??? did u ever tried get to your recovery??? (pressing volume down continusly when boot up?????)
Click to expand...
Click to collapse
my phone with locked boot loader so i can't flash via fastboot yes i'm try get to cwm recovery but nothing
Click to expand...
Click to collapse