i have a x10 minipro , i got it rooted , i wanted install custom rom on it , i forgot to do the kernal , and went directly to install the rom from ( Press BACK button few times right after white SE logo appears.) , i wiped cach, and factory reset , and then restart , now it is freeze on the SE logo foreverrrrrrr, can any one help pls , im desprete
mbali1 said:
i have a x10 minipro , i got it rooted , i wanted install custom rom on it , i forgot to do the kernal , and went directly to install the rom from ( Press BACK button few times right after white SE logo appears.) , i wiped cach, and factory reset , and then restart , now it is freeze on the SE logo foreverrrrrrr, can any one help pls , im desprete
Click to expand...
Click to collapse
Flash the kernel.
try flashing stock Roman
Sent from my E10i using xda app-developers app
You will need roms which are commpatible with stock kernels....Just download this rom and install........ http://forum.xda-developers.com/showthread.php?t=1201116
Hit thanks if you found me helpful..
Sent from my U20i using xda app-developers app
Related
Ok this is my story...
I have an x10 pro... have everything installed such as root and xrecovery that is needed to install custom mods.
My firmware is 2.1.1.A.0.16 With 2.1 update1
But here is the problem i am having....
When i try to install the v8 of CM(Cyanogen Mod) it installs everything without errors BUT, it does not go pass the SE Logo with the background and keeps restarting from that point onwards continuously.
Then i installed the hotfix, that helped a little as after i installed it , I got past the SE logo with the background black and it went as far as the custom boot start where it says 'DROOOID' and while that boot spins with its arrow for like 3 seconds, it then gets stuck there freezes and then restarts from that point onwards and does not get into the menu....
there's no harm in my phone as i made a backup wit xrecovery before i attempted anything which is so awesome lol...
But then i tried installing v5 of CM and it worked everything went into the menu and worked fine .... though my sd card was not being picked up....
I have ext2 only is it necessary to have a hotswap and more partitions to make the sd card work on CM ???
please anyone!!! help me with installing v8 Cm moD !!!!!!!!!!
Did you wipe battery stats and factory wipe before you install v8?
Sent from my U20i using XDA Premium App
yes i did... everything i was asked to do... did every step in the forum of v8 cyanogen mod 7 .... still no result....
the correct firmware is 2.1.1.A.0.6
Btw, what baseband and fw are you on?
Sent from my U20i using XDA Premium App
I have ext2 only is it necessary to have a hotswap and more partitions to make the sd card work on CM ???
Click to expand...
Click to collapse
U dont need the ext2 partition. The ROM uses native apps2sd. Also, try installing the v7 first and flash v8 on it! Hope it helps.
Sent from my X10 Mini using XDA App
farhanino said:
yes i did... everything i was asked to do... did every step in the forum of v8 cyanogen mod 7 .... still no result....
Click to expand...
Click to collapse
Confirm the basband, it needs to finish with 0015 and not 006!
It was also my problem. See here the solution: http://forum.xda-developers.com/showthread.php?t=1026466
my baseband is
M76XX-TSNCJOLYM-53404006
and my fw is 2.1-update 1
thanks alot ure info helped although i jst wanted to knw my build number is 2.1.1.A.0.16 how do i change it to the required 2.1.1.A.0.6
ok ive successfully changed my baseband and everythin AND IVE INSTALLED V8 CM7 !!!!!!!! it works fine for ten seconds then it crashes and freezes!!!!!!!!!!!!! ok i hot hotfix mimmi wud help..... but wen i install hotfix it bootloops doesn even reach the menu !!! help???
go to xrecovery
restore to v8 without hotfix
after that
wipe cache
go to advanced:
wipe dalvik cache
reboot
if still crashes
wipe data as well
but make sure to have backup
Slade thanks a lot its working now that I wiped cache n dalvik cache perfectly ... no problems with my market or wifi all working thanks a lot guys
..::XDA Rock::..
Hi I have simillar problem but nothing is helping.
Newest CM7 and stuck on android logo...i was waiting even 30 minutes but without results...any help ?
huh...i tried cm6 and now cm7 and it works !! Loaded....
4hrs of horror ended.
deliasz said:
Hi I have simillar problem but nothing is helping.
Newest CM7 and stuck on android logo...i was waiting even 30 minutes but without results...any help ?
Click to expand...
Click to collapse
Mini or pro ???
Sent from my U20i using XDA Premium App
Cyanogen v8 wtf I want a link pleas
Sent from my U20i using XDA Premium App
Think this is an old thread, v8 refers to Slade's CM7 gingerbread ROM which is now v15.
Sent from my X10 Mini Pro
Thanks thought a mist somint there lol peace
Sent from my U20i using XDA Premium App
Hey guys,is it possible to flash Stock 2.3 rom through flashtool if you are stuck at SE logo.Also,please provide the link to stock rom.
http://www.mirrorcreator.com/files/0OIDEZNA/
Sent from my Desire HD using xda premium
If this doesnt work let me know.
Sent from my Desire HD using xda premium
isthisreallife said:
Hey guys,is it possible to flash Stock 2.3 rom through flashtool if you are stuck at SE logo.Also,please provide the link to stock rom.
Click to expand...
Click to collapse
Yes - here I wrote complete tutorial (with ROM also) for another user:
http://forum.xda-developers.com/showpost.php?p=26188361&postcount=8
stuck on SE logo
formated data, cache, system and rebooted....
just stuck on SE logo.....
nothing is working.. what should i do know....
sainath1248 said:
formated data, cache, system and rebooted....
just stuck on SE logo.....
nothing is working.. what should i do know....
Click to expand...
Click to collapse
More info needed. What Rom kernel locked/unlocked
Stuck @ se logo sounds like bad kernel
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
CM7zmod-locked
Actually it happend when i m installing Fera v19..
Formated every thing & installed custom zip..
I got a msg as "sdcard/device busy" instal aborted.
So i rebooted phone..
And finally got stuck at SE logo..
Can any one help me plz..
Sent from my GT-S5360 using xda premium
sainath1248 said:
CM7zmod-locked
Actually it happend when i m installing Fera v19..
Formated every thing & installed custom zip..
I got a msg as "sdcard/device busy" instal aborted.
So i rebooted phone..
And finally got stuck at SE logo..
Can any one help me plz..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Update it with SEUS.......
Sent from my U20i using xda premium
Nothing is working. how can i update? just got stuck.
Any tutorial or guiding url..
Sorry i am new to this
Sent from my GT-S5360 using xda premium
sainath1248 said:
Nothing is working. how can i update? just got stuck.
Any tutorial or guiding url..
Sorry i am new to this
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
No search for SEUS in google it will help.
Sent from my U20i using xda premium
Maybe bad sd card. Remove sd card an try reboot
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
sainath1248 said:
CM7zmod-locked
Actually it happend when i m installing Fera v19..
Formated every thing & installed custom zip..
I got a msg as "sdcard/device busy" instal aborted.
So i rebooted phone..
And finally got stuck at SE logo..
Can any one help me plz..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Something same happened with me and I got my X10 back, so don't worry.
You just have to flash the stock SE firmware is by using the X10 Flashtool.
And then root your phone again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
The firmware I used :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Relax and flash !
http://forum.xda-developers.com/showthread.php?p=26310823#post26310823
Thanks you very much guys..
isthisreallife said:
Thanks you very much guys..
Click to expand...
Click to collapse
Did you win?
There is a thanks button:-D
They won
http://forum.xda-developers.com/showthread.php?t=1655449
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
to update using SEUS we need to enter into debuging mode....
it is not working as i m stuck at logo itself...
any another way dude...
else provide me 2.3.3 link..
i tried all links all are broken links
that means you didn't read my post (number 13) on this thread, you DO NOT need to get to debbuggin to flash! anyway, if you don't wanna read it:
I assume your phone is X10i (if it's X10a let me know)
1.- download stock generic firmware http://minus.com/mAla782XK/1f
2.- download and install flashtool http://androxyde.github.com/Flashtool/
3.- inside flashtool you'll find several folders, unrar your firmware (X10i_3.0.1.G.0.75_1241-1846.ftf ) inside firmware folder, do not connect your phone yet
4.- run flashtool and click on "flash" icon, pick flashmode, then OK
5.- On the left side select your firmware and hit OK (It will say "preparing files for flashing")
6.- A window giving you instruccions will pop up, just press and hold the back button on your phone, connect the USB cable (which is already connected to PC, of course ) and don't let go the button until you read flashtool started to flash
7.- wait 'till it finishes
8.- It will only take a few minutes, the only moment it seems it's stucked is when is flashing "system" , don't worry, it takes a little longer that the other files.
9.- after is done, just unplug, turn it on and wait, don't forget first boot always takes a little longer too!!!!!!
10.- If you want to, use flashtool to root your phone and install xrecovery afterwards, that's it, brand new
Hope it helps and is clear enough, any question just ask, I'm usually here.
Don't forget to hit "thanks" if I was helpful!!
dude thank u very much and to all who helped me....
from today no worries, whatever might happen to my phone.... I can kick it..
good day
hello guyz last month i took Xperia active i mod my X8 bt it is hard to mod my active ok plz tell me wat mistake i have done
First i upgraded to ics via PCC den i got him to GB to get root then i unlocked it from Sony website through SE Bootloader_Unlocking_Relocking my cell phone got new i mean it was the same type when i removed him frm box
den i was searching for cwm den i installed install-cwm2.cmd bt it showed an error more than one device and emulator den i flashed FXP and i got cwm in it and i try to install custom rom MIUI_GB_2.3.16_Xperia2011_MDPI bt it starts agn frm the orange screen i flashed rage_kernel2.7 same problem den i downloaded more rom HyperbeamNewTimeBase same problem the loading screen of this rom stuck den i tried Speriene Active in this rom i cant see anything bt i can see the power off menu wen i press the lock button now i am stuck wt to do plz guide pplz Plz HELP ME
Umm.. I couldn't understand a single thing you are trying to say. Please use proper english.
simon quinny said:
hello guyz last month i took Xperia active i mod my X8 bt it is hard to mod my active ok plz tell me wat mistake i have done
First i upgraded to ics via PCC den i got him to GB to get root then i unlocked it from Sony website through SE Bootloader_Unlocking_Relocking my cell phone got new i mean it was the same type when i removed him frm box
den i was searching for cwm den i installed install-cwm2.cmd bt it showed an error more than one device and emulator den i flashed FXP and i got cwm in it and i try to install custom rom MIUI_GB_2.3.16_Xperia2011_MDPI bt it starts agn frm the orange screen i flashed rage_kernel2.7 same problem den i downloaded more rom HyperbeamNewTimeBase same problem the loading screen of this rom stuck den i tried Speriene Active in this rom i cant see anything bt i can see the power off menu wen i press the lock button now i am stuck wt to do plz guide pplz Plz HELP ME
Click to expand...
Click to collapse
Are you making full wipe?? Maybe thats the problen make sure you make a full wipe in CWM
Sent from my SK17i using xda premium
So you have an unlocked bootloader try this:
Flash rage kernel 3.0
In CWM wipe data/factory reset
Wipe cache
Advanced-wipe dalvik cache
Mounts and Storage-format system
After that flash S'perience Rom
And reboot
Sent from my MiniPro using xda app-developers app
simon quinny said:
hello guyz last month i took Xperia active i mod my X8 bt it is hard to mod my active ok plz tell me wat mistake i have done
First i upgraded to ics via PCC den i got him to GB to get root then i unlocked it from Sony website through SE Bootloader_Unlocking_Relocking my cell phone got new i mean it was the same type when i removed him frm box
den i was searching for cwm den i installed install-cwm2.cmd bt it showed an error more than one device and emulator den i flashed FXP and i got cwm in it and i try to install custom rom MIUI_GB_2.3.16_Xperia2011_MDPI bt it starts agn frm the orange screen i flashed rage_kernel2.7 same problem den i downloaded more rom HyperbeamNewTimeBase same problem the loading screen of this rom stuck den i tried Speriene Active in this rom i cant see anything bt i can see the power off menu wen i press the lock button now i am stuck wt to do plz guide pplz Plz HELP ME
Click to expand...
Click to collapse
MIUI rom over fxp.. Your first mistake
Sent from my WT19i using xda app-developers app
Thnx Ppl For Replyin !!!!
prime_225 said:
Umm.. I couldn't understand a single thing you are trying to say. Please use proper english.
Click to expand...
Click to collapse
m really sorry Sir bt Thnx for replyin !!!!:crying:
rachit.rc96 said:
MIUI rom over fxp.. Your first mistake
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Sir as per requirement they said FXP cm 7.2
here ---> http://forum.xda-developers.com/showthread.php?t=1724798
daydu19 said:
Are you making full wipe?? Maybe thats the problen make sure you make a full wipe in CWM
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
In CWM wipe data/factory reset = full wipe??
If wipe data/factory reset = full wipe den i have done this
Is there any problem with my Baseband Version -- 8x55A-AAABQOAZM-203028D-56
aNd Build number is 4.0.2.A.0.42
Okay ... So kernel and baseband are ok ... Can you get into flashmode ? ( vol down + USB = green LED ) ...YOU can flash stock firmware.
Sent from my WT19i using xda app-developers app
get stock firmware .ftf file from XDA and use flashtool. dont need to install kernel separately. Flashtool rocks
Always there to save the day for noobs
MoonBlade said:
get stock firmware .ftf file from XDA and use flashtool. dont need to install kernel separately. Flashtool rocks
Always there to save the day for noobs
Click to expand...
Click to collapse
That i have done guys i have flashed stock firmware bt i want custom rom and i have took risk of unlockin it not for stock rom plz help me guys
U unlocked bootloader? If yes, just search for roms in development section. Read carefully
Sent from my E15i using Tapatalk 2
bandarigoda123 said:
U unlocked bootloader? If yes, just search for roms in development section. Read carefully
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
Sir i searched which rom i want bt m nt able to install rom bt i can flash custom kernels
thnx for ur rply
simon quinny said:
In CWM wipe data/factory reset = full wipe??
If wipe data/factory reset = full wipe den i have done this
Click to expand...
Click to collapse
Make sure you are doing this:
flash the kernel go to cwm wipe factory wipe cache
go to mounts & storage-format system
go to advanced -wipe dalvik
cache flash the rom reboot..
Then make sure that in aroma installer u selec the right phone model and unlocked bootloader option!!!
You can always hit the thaks botton if we are helpping you.
Sent from my SK17i using xda premium
Why did you upgrade to ics if you wanted to install a gb rom? I think problems started there.....
Full wipe = in CWM do factory reset, then go to mounts and storage and select format system, then advanced and wipe dalvik cache.
Then flash rom.
If you keep having problems flash the stock GB fw, then restrt the process again: Flash kernel for the rom you want -> do a full wipe in cwm (you have to format system in mounts and storage!) -> then install the zip.
KhemaraS. said:
So you have an unlocked bootloader try this:
Flash rage kernel 3.0
In CWM wipe data/factory reset
Wipe cache
Advanced-wipe dalvik cache
Mounts and Storage-format system
After that flash S'perience Rom
And reboot
Sent from my MiniPro using xda app-developers app
Click to expand...
Click to collapse
thnx bro i solved my problem with ur rom now i can use S'perience bt cant use other roms
anywyz ur room is smooth i loved it
i flashed the z-mix final zip on cwm and i get stuck at xperia Logo plz help :crying::crying::crying::crying::crying:
Try going to CWM nd do a factory data reset. If that doesn't work,
Flash firmware via flashtool or if you're nt on a custom kernel(unlocked bootloader) you can use Sony PC companion/Update service
Sent from my ST25i using xda app-developers app
MaDTH Bistata said:
i flashed the z-mix final zip on cwm and i get stuck at xperia Logo plz help :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
u phone is bootloop .. try wipe all from CWM and try again ..
but if still bootloop re flash u rom ..
hi everyone xda
ive install cwm on my xperia neo and it said succesfull...
but when i boot into recovery my phone stucks at black screen any idea or solution...
plz help thanks to all developers...
Did u try pressing the volume key when logo appeared?
Sent from my MT11i using xda app-developers app
Press volume down few times.
If you keep getting sony logo, flash new firmware via flashtool.
Flash new firmware if u r getting black screen (bootloop)
for CWM installation download "xParts" from google play and install CWM files from there and then tap on "auto magically boot in CWM"
So , u don't need to do pressing any hardware key , it will do automatically CWM boot !
sent from [xPEriA] [nEo V] [Mt11i]
Thanks ive got it. Ive installed wrong cwm ver.
Sent from my MT27i using XDA Premium 4 mobile app