Ok this is my story...
I have an x10 pro... have everything installed such as root and xrecovery that is needed to install custom mods.
My firmware is 2.1.1.A.0.16 With 2.1 update1
But here is the problem i am having....
When i try to install the v8 of CM(Cyanogen Mod) it installs everything without errors BUT, it does not go pass the SE Logo with the background and keeps restarting from that point onwards continuously.
Then i installed the hotfix, that helped a little as after i installed it , I got past the SE logo with the background black and it went as far as the custom boot start where it says 'DROOOID' and while that boot spins with its arrow for like 3 seconds, it then gets stuck there freezes and then restarts from that point onwards and does not get into the menu....
there's no harm in my phone as i made a backup wit xrecovery before i attempted anything which is so awesome lol...
But then i tried installing v5 of CM and it worked everything went into the menu and worked fine .... though my sd card was not being picked up....
I have ext2 only is it necessary to have a hotswap and more partitions to make the sd card work on CM ???
please anyone!!! help me with installing v8 Cm moD !!!!!!!!!!
Did you wipe battery stats and factory wipe before you install v8?
Sent from my U20i using XDA Premium App
yes i did... everything i was asked to do... did every step in the forum of v8 cyanogen mod 7 .... still no result....
the correct firmware is 2.1.1.A.0.6
Btw, what baseband and fw are you on?
Sent from my U20i using XDA Premium App
I have ext2 only is it necessary to have a hotswap and more partitions to make the sd card work on CM ???
Click to expand...
Click to collapse
U dont need the ext2 partition. The ROM uses native apps2sd. Also, try installing the v7 first and flash v8 on it! Hope it helps.
Sent from my X10 Mini using XDA App
farhanino said:
yes i did... everything i was asked to do... did every step in the forum of v8 cyanogen mod 7 .... still no result....
Click to expand...
Click to collapse
Confirm the basband, it needs to finish with 0015 and not 006!
It was also my problem. See here the solution: http://forum.xda-developers.com/showthread.php?t=1026466
my baseband is
M76XX-TSNCJOLYM-53404006
and my fw is 2.1-update 1
thanks alot ure info helped although i jst wanted to knw my build number is 2.1.1.A.0.16 how do i change it to the required 2.1.1.A.0.6
ok ive successfully changed my baseband and everythin AND IVE INSTALLED V8 CM7 !!!!!!!! it works fine for ten seconds then it crashes and freezes!!!!!!!!!!!!! ok i hot hotfix mimmi wud help..... but wen i install hotfix it bootloops doesn even reach the menu !!! help???
go to xrecovery
restore to v8 without hotfix
after that
wipe cache
go to advanced:
wipe dalvik cache
reboot
if still crashes
wipe data as well
but make sure to have backup
Slade thanks a lot its working now that I wiped cache n dalvik cache perfectly ... no problems with my market or wifi all working thanks a lot guys
..::XDA Rock::..
Hi I have simillar problem but nothing is helping.
Newest CM7 and stuck on android logo...i was waiting even 30 minutes but without results...any help ?
huh...i tried cm6 and now cm7 and it works !! Loaded....
4hrs of horror ended.
deliasz said:
Hi I have simillar problem but nothing is helping.
Newest CM7 and stuck on android logo...i was waiting even 30 minutes but without results...any help ?
Click to expand...
Click to collapse
Mini or pro ???
Sent from my U20i using XDA Premium App
Cyanogen v8 wtf I want a link pleas
Sent from my U20i using XDA Premium App
Think this is an old thread, v8 refers to Slade's CM7 gingerbread ROM which is now v15.
Sent from my X10 Mini Pro
Thanks thought a mist somint there lol peace
Sent from my U20i using XDA Premium App
Related
my xperia x10 is always encounter stock in se logo after flashing JIT. my model number is SO-01B basebabd 2.0.52 kernel 2.6.29 build number 2.0.1.B.0.19 i root my phone using flash tool 0.2.8.0 and install xRecovery the latest one. can anyone help me about this?
Wipe dalvik cache from Xrecovery right after flashing jit.
OmegaRED^ said:
Wipe dalvik cache from Xrecovery right after flashing jit.
Click to expand...
Click to collapse
yes i did wipe delvik cache sir. i dont know how long boot se this is normal? when you flash JIT? a lot of times stock in se logo? i really want JIT on my phone sorry for this question because im new here in se xperia x10 im came from wildfire before. im shock after i flash jit i stock in se logo (sorry for my english)
Is your ROM stock? If it us a custom kernel, them don't expect it to work.
Sent from my Xperia Arc using XDA Premium App
JingleJo said:
Is your ROM stock? If it us a custom kernel, them don't expect it to work.
Sent from my Xperia Arc using XDA Premium App
Click to expand...
Click to collapse
Yes my rom is stock. So it means jit is not compatible in stock rom? but I have many watch videos on YouTube and the rom is stock and the jit is installed properply
Sent from my HTC Wildfire using XDA App
OmegaRED^ said:
Wipe dalvik cache from Xrecovery right after flashing jit.
Click to expand...
Click to collapse
oops i think im wrong sir OmegaRED i forgot what you said before on my x10 my first step i did is wipe dalvik cache this my mistake. like what you said your rigth im gonna try this again thanks
EDIT: my xperia x10 docomo model number SO-10B can i flash generic 2.1.1 x10a in flash tool? because when i try to root my phone they have a red message in flash tool but the rooting is successfull.
I have the cm7 on my x10 mini and i want to restore to my first rom or delete this one somehow?
Thanks.
if you search the forum, others have suggested using pc companion to revert back to the original se rom.
next time, try using the search button
i did but how to use the repair thing in the PC Companion,i dont see any button like this :O
adidtnt said:
i did but how to use the repair thing in the PC Companion,i dont see any button like this :O
Click to expand...
Click to collapse
When you load pc companion or SEUS you will see a button to check for updates, it will then tell you the software is up to date but would you like to reinstall it anyway. If you click 'yes' it will then begin downloading the latest 'official' SE 2.1 ROM and install it (wiping your phone in the process).
Sent from my U20i using Tapatalk
Yes obsidian eclipse is right, that will get you back to stock if u use seus
Sent from my X10i using XDA App
@obsidian_eclipse
Well last time I tried that, it hadnt asked me to reinstall it... Im interested, how long ago was this method out?
@adidtnt;
Anyway, if you get in trouble with it, you can always manually flash an old official rom to it and then update it through SEUS.
thanks the SEUS worked but did it delete the recovery or not ?
adidtnt said:
thanks the SEUS worked but did it delete the recovery or not ?
Click to expand...
Click to collapse
it also removes xRecovery or CWM... yes
adidtnt said:
thanks the SEUS worked but did it delete the recovery or not ?
Click to expand...
Click to collapse
wher i get it (SEUS) and how does this work.I have such a problem :ยด
I rooted my x10 mini android 2.1 to 2.3 CyanogenMod 7.0 with this version my SD card didnt work. Then tried CyanogenMod 7.9, after restart theres only Sony Ericsson logo on the screen, then I disconnectied battery and phone went to clockworkmode. From there I cant do anything. I have tried to restore( no files ) and then reinstall android but installation was aborted. when I reboot my phone then logo stays.
NEXT DAY: something happened, riht now only Sony Ericsson logo on the screen. clockworkmode does not work anymore!
I hope somebody can help me out. Its my first Android and im new at this.
Update ur phone using pc companion. Or Sony Ericsson update service ....
Sent from my X10mini using XDA Premium App
dont do it, use mini-04, which is stock rom + root and without all the se garbage.
Everything works perfectly and its fast and smooth.
Disable auto-brightness and you got a perfect little droid.
@ schmolch
thx i works just fine
normally i just use pc companian , then superoneclick to root, and titaninium back up to remove the se crap
but this is a lot faster
Very odd thing. I installed EWJet Rom few weeks ago. Wanted to try wolfbreaks so I used SEUS. I now have official gb dont know how because I was told by operator it was not being released to us. Any one explain this I dont get how it but gb on it
Sent from my X10i using XDA App
laneyofdeath said:
Very odd thing. I installed EWJet Rom few weeks ago. Wanted to try wolfbreaks so I used SEUS. I now have official gb dont know how because I was told by operator it was not being released to us. Any one explain this I dont get how it but gb on it
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Official gb hasn't been released for mini/mini pro so if you have it then you'll be the only one ever lol, im sure SE would be suprised to know that too
X10 Mini Pro runnin miniCM7Pro V7+ with custom red xperia theme
Sent from my U20i using XDA Premium
Lancerfq said:
Official gb hasn't been released for mini/mini pro so if you have it then you'll be the only one ever lol, im sure SE would be suprised to know that too
X10 Mini Pro runnin miniCM7Pro V7+ with custom red xperia theme
Sent from my U20i using XDA Premium
Click to expand...
Click to collapse
Yeah i really dont understand it I have now re-rooted using kernal downgrade/upgrade method & want to change coz stock is pretty laggy.
Ps also i have an x10i not a mini
laneyofdeath said:
Yeah i really dont understand it I have now re-rooted using kernal downgrade/upgrade method & want to change coz stock is pretty laggy.
Ps also i have an x10i not a mini
Click to expand...
Click to collapse
dude wrong forum
x10 is waaaay different than x10 mini/pro
you better go to x10 forums before you do somethimg that will brick your phone
(in order to understand the differencies in mini we cannot even touch the kernel not upgrade/downgrade.... )
dave481985 said:
dude wrong forum
x10 is waaaay different than x10 mini/pro
you better go to x10 forums before you do somethimg that will brick your phone
(in order to understand the differencies in mini we cannot even touch the kernel not upgrade/downgrade.... )
Click to expand...
Click to collapse
Apologies thought it was x10 forum (not mini)
Sent from my X10i using XDA App
Hi to all!
First i'm not good in English.
Second, I'm New to the forum and other stuff.
However, I managed to Install CWM (Searched thread) in my X10 mini and Installed ROM MiniCM7 pro V21. Everything Worked Fine.
Last Night i Check UnderVolt Option (Forgot where it was). It Asked for SU permission I approved And Next thing I know is My God damn phone restarting!!!
I Tried to Reboot in Recovery it's not working.
What should I do Now? Please HELP HELP HELP.................
Try to flash your kernel again. After that wipe data and flash rom again. Tell me if this worked. Greetz, jan2426
Sent from my E10i using XDA App
Try using SEUS, or flashing it again via Flashtool
Sent from my MZ605 using XDA App
Hellp Me please i've the same problem, my X10 Mini didn't start, it blocks on SONY ERICSSON Logo !!!
Hey guys,is it possible to flash Stock 2.3 rom through flashtool if you are stuck at SE logo.Also,please provide the link to stock rom.
http://www.mirrorcreator.com/files/0OIDEZNA/
Sent from my Desire HD using xda premium
If this doesnt work let me know.
Sent from my Desire HD using xda premium
isthisreallife said:
Hey guys,is it possible to flash Stock 2.3 rom through flashtool if you are stuck at SE logo.Also,please provide the link to stock rom.
Click to expand...
Click to collapse
Yes - here I wrote complete tutorial (with ROM also) for another user:
http://forum.xda-developers.com/showpost.php?p=26188361&postcount=8
stuck on SE logo
formated data, cache, system and rebooted....
just stuck on SE logo.....
nothing is working.. what should i do know....
sainath1248 said:
formated data, cache, system and rebooted....
just stuck on SE logo.....
nothing is working.. what should i do know....
Click to expand...
Click to collapse
More info needed. What Rom kernel locked/unlocked
Stuck @ se logo sounds like bad kernel
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
CM7zmod-locked
Actually it happend when i m installing Fera v19..
Formated every thing & installed custom zip..
I got a msg as "sdcard/device busy" instal aborted.
So i rebooted phone..
And finally got stuck at SE logo..
Can any one help me plz..
Sent from my GT-S5360 using xda premium
sainath1248 said:
CM7zmod-locked
Actually it happend when i m installing Fera v19..
Formated every thing & installed custom zip..
I got a msg as "sdcard/device busy" instal aborted.
So i rebooted phone..
And finally got stuck at SE logo..
Can any one help me plz..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Update it with SEUS.......
Sent from my U20i using xda premium
Nothing is working. how can i update? just got stuck.
Any tutorial or guiding url..
Sorry i am new to this
Sent from my GT-S5360 using xda premium
sainath1248 said:
Nothing is working. how can i update? just got stuck.
Any tutorial or guiding url..
Sorry i am new to this
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
No search for SEUS in google it will help.
Sent from my U20i using xda premium
Maybe bad sd card. Remove sd card an try reboot
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
sainath1248 said:
CM7zmod-locked
Actually it happend when i m installing Fera v19..
Formated every thing & installed custom zip..
I got a msg as "sdcard/device busy" instal aborted.
So i rebooted phone..
And finally got stuck at SE logo..
Can any one help me plz..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Something same happened with me and I got my X10 back, so don't worry.
You just have to flash the stock SE firmware is by using the X10 Flashtool.
And then root your phone again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
The firmware I used :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Relax and flash !
http://forum.xda-developers.com/showthread.php?p=26310823#post26310823
Thanks you very much guys..
isthisreallife said:
Thanks you very much guys..
Click to expand...
Click to collapse
Did you win?
There is a thanks button:-D
They won
http://forum.xda-developers.com/showthread.php?t=1655449
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
to update using SEUS we need to enter into debuging mode....
it is not working as i m stuck at logo itself...
any another way dude...
else provide me 2.3.3 link..
i tried all links all are broken links
that means you didn't read my post (number 13) on this thread, you DO NOT need to get to debbuggin to flash! anyway, if you don't wanna read it:
I assume your phone is X10i (if it's X10a let me know)
1.- download stock generic firmware http://minus.com/mAla782XK/1f
2.- download and install flashtool http://androxyde.github.com/Flashtool/
3.- inside flashtool you'll find several folders, unrar your firmware (X10i_3.0.1.G.0.75_1241-1846.ftf ) inside firmware folder, do not connect your phone yet
4.- run flashtool and click on "flash" icon, pick flashmode, then OK
5.- On the left side select your firmware and hit OK (It will say "preparing files for flashing")
6.- A window giving you instruccions will pop up, just press and hold the back button on your phone, connect the USB cable (which is already connected to PC, of course ) and don't let go the button until you read flashtool started to flash
7.- wait 'till it finishes
8.- It will only take a few minutes, the only moment it seems it's stucked is when is flashing "system" , don't worry, it takes a little longer that the other files.
9.- after is done, just unplug, turn it on and wait, don't forget first boot always takes a little longer too!!!!!!
10.- If you want to, use flashtool to root your phone and install xrecovery afterwards, that's it, brand new
Hope it helps and is clear enough, any question just ask, I'm usually here.
Don't forget to hit "thanks" if I was helpful!!
dude thank u very much and to all who helped me....
from today no worries, whatever might happen to my phone.... I can kick it..
good day
i have a x10 minipro , i got it rooted , i wanted install custom rom on it , i forgot to do the kernal , and went directly to install the rom from ( Press BACK button few times right after white SE logo appears.) , i wiped cach, and factory reset , and then restart , now it is freeze on the SE logo foreverrrrrrr, can any one help pls , im desprete
mbali1 said:
i have a x10 minipro , i got it rooted , i wanted install custom rom on it , i forgot to do the kernal , and went directly to install the rom from ( Press BACK button few times right after white SE logo appears.) , i wiped cach, and factory reset , and then restart , now it is freeze on the SE logo foreverrrrrrr, can any one help pls , im desprete
Click to expand...
Click to collapse
Flash the kernel.
try flashing stock Roman
Sent from my E10i using xda app-developers app
You will need roms which are commpatible with stock kernels....Just download this rom and install........ http://forum.xda-developers.com/showthread.php?t=1201116
Hit thanks if you found me helpful..
Sent from my U20i using xda app-developers app