Hello, the tablet CN98 Chinese Not starting... Is remaing to loading Android for 20 minutes, I didn't found recovery menu, any suggestion? thanks for help
get the orginal frimware from Crony company
and follow this steps:
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
corny china tablet recovery mode
hi bros follow simple instruction to get recovery mode on corny tablet. press and hold reset button till screen off then release reset button . and press and hold volume up till u get recovery mode. tested by me
awesome man this trick works great..
i tried whole internet and nothing else works ..
thanks a ton @abuafee
how can i find the firmware for my tablet? Crony CN997G
Related
Hi So I am stuck in download mode when I tried to root my Fascinate with odin today it got a fail 1 success 0. I have tried holding down the power button for 10 seconds and a battery pull to no avail. Help would be greatly appreciated.
I would suggest that you get a .pit and re partition while you are going back to stock.
Omniscient S said:
I would suggest that you get a .pit and re partition while you are going back to stock.
Click to expand...
Click to collapse
Thank you for responding but I have not rooted yet the problem occurred when I was trying to root.
are you following the [GUIDE] from droidstyle?? Section 6
Section 6: How to root stock froyo or gingerbread(This is not needed if your flashing a custom rom)
Downloads these files to PC,
Samsung drivers-
Odin (computer program)-
CWMALL 2.5 (place this file somewhere on your computer where you can easily locate it)-
"su-2.3.6.1.x.zip" file (place this file on the root of your sdcard...not within any folders)-
Modified stock Froyo kernel (place this file somewhere on your computer where you can easily locate it). This file is only necessary if you're rooting Froyo. It's not necessary for Gingerbread-
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs on your computer and/or phone for this to work properly.)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord that came with your phone into a powered USB port on your computer (usually on the back of the computer).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. (Let go of the volume button at this point.) You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Click the PDA button in Odin (NOT the PHONE button) and navigate to the "CWM2.5_Voodoo.tar.md5" file you downloaded earlier. This file does not include a voodoo kernel and will not perform the voodoo lagfix conversion. It's only named as such to note that it is compatible with voodoo kernels.(make sure auto reboot is unchecked, although it should be by default)
7. Click START. When this process has finished, you'll be notified in Odin (succeeded 1 / failed 0) and your phone's screen will go blank.
*** Step 8 is only for rooting Froyo. If you're rooting Gingerbread, skip Step 8 and proceed to Step 9. ***
8. Unplug your phone and click RESET in Odin. Repeat Step 5 to get the phone back into download mode and recognized by Odin. Using the PDA button, navigate to the "stock_kernel.tar.md5" file you downloaded earlier, select it, and press START. You'll again be notified in Odin once this process has completed (succeeded 1 / failed 0).
9. Unplug your phone and re-insert the battery.
10. Press and hold BOTH volume buttons. While holding them, press the power button. Hold all three simultaneously until you see "SAMSUNG" appear TWICE. This will boot your phone into CWM 2.5 red recovery. If your phone boots up normally here and not into recovery, just wait for it to boot up and then power it down and try again. It may take a couple tries for you to get it right.
11. Using the volume rocker, navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
12. Navigate to "choose zip from sdcard" and select with the power button.
13. Navigate to the "su-2.3.6.1.x.zip" file that you downloaded earlier and select it. Scroll to "Yes," and use power button to select.
14. When you're advised of completion, press the MENU softkey to go back to the previous CWM Recovery screen, then highlight and select "reboot system now."
*Thanks to Bhfd64 @ galaxy forums for this write up!!
.
Hi guys,
I just used Download Mode + Odin to push T110.CWM.v6.0.4.8.tar.md5 to my T110 Tablet.
After that I could boot into CWM-based Recovery v6.0.4.8 without issues.
Then I installed the zip file android-armeabi-universal-root-signed.zip
After that I rebooted. And since then I was not able to boot into Android or even Download Mode.
Only Recovery Mode works.
Then I tried to run adb devices from Windows and it reports my device ID number + recovery.
Now I was hoping somebody could help me with some adb commands to get this thing working again.
My initial goal was to root and upgrade from 4.1.2 to 4.2.2.
I would prefer using this lite rom T110UEUANE4.LiteV2.Rooted.Deodexed.June2014.zip instead of the official rom T110XXUANG2_T110OXAANG2_XEO.zip.
But at this point I would not care to much, I just hope it can be fixed again
Many thanks for your help!
How to unbrick your Samsung Galaxy Tab 3 Lite SM-T 110
Things to download:
stock kitkat rom: sammobile.com/firmwares/download/32777/T110XXUANG2_T110OXAANG2_XEO/
Odin: androidhost.org/get/PVAIv
Installation instructions:
1. Extract both zips onto your desktop.
2. Start the odin application.
3. Turn off tablet, and hold -volume button, the home button, and the power button at the same time.
4. Release power button once the tablet turns on but hold the home an the -volume button down.
5. Once transferred to new screen accept warning by pressing the +volume button.
6. Connect your tablet to your computer and wait for Odin to recognize your device.
7. Once recognized, click AP and navigate to the extracted kitkat stock rom MD5 file.
8. Wait about 5 minutes for Odin to check the file.
9. Once odin checks the file make sure to only have Restart and f. reset time checked in the options.
10-1. Click start and wait for installation. to complete.
10-2. If you cannot get to the start button, press tab until you are at the start button and press enter. Start button is at the bottom left.
11. Tablet will restart automatically and you are done.
Quick note: you just learned how to recover from a soft brick.
1.- Wait until the device turns off.
2.- Plug the device on the base and when the screens shows the battery logo, unlink the device form the base and immediately press and hold the power button.
3.- When the ''rebooting'' screen apears, relase and press twice the button again to enter the menu.
4.- Go down to the options and select download (1 Click: go down, 2 Clicks select).
5.- Conect the device to the computer, open odin, and flash the tizen rom. (E-mail me for the link).
6.- Wait until the process finish and never try to flash another thing to your watch.
Hope you can revive the watch .
Help:
[email protected]
I tried to reset the windows and from that moment I have only the logo of your company and after that a black screen.
I did the following :
1. At the very beginning i hold down the Power key in order to switch on the device.
2. Afterwards i hold down Shift key (on screen keyboard).
3. While the Shift key is still pressed, i tap Restart option and confirm the operation.
4. In the next step i choose Troubleshoot.
5. Then i tap Reset my PC and i confirm operation by pressing Next.
6. I choose Fully clean the drive.
After some time, the message I got was: "There was an error and hit cancel".
I tried to cancel it but it was nothing happen. So i shut it down.
After that i try to get in bios:
I push the power button and hit the "del" on my keyboard but nothing happens.
( I connected the keyboard to the device on USB )
my device simply makes restarting all the time.
Can you tell me what to do?
best regards from GREECE
ps. I have only a Linux operation system on my PC.
After android 10 update it shows " to start android required password". I follow the instruction that is in asus website to solve from password but when I follow the instructions using power +vol down key it show "no command". I call and email the customer care, both they told me to contact service centre.
At that time I follow a person's instruction on you tube it solved the problem.
Android 10 password problem solved but no command option still remain at recovery mode(pressings power + vol down button)..pls suggest anybody.
No command problem solved
How to solve no command problem
Please tell me how to solve no command problem in android 10
1. Switch off the phone.
2. Press power button & vol down button after phone start release the both button.
3. Phone show the no command option
4. Press power button for 2 sec then press the vol up button for 1 sec and release both button.
5. It shows the recovery option and select wipe data
6. After wipe data select reboot to system.
7. Enjoy the fresh android.