Guys Please help
While i have try flash software via mobile odin battery has comes out. After boot phone again touch screen stop working.
Now S2 stook on Samsung galaxy s2 logo and dont wanna boot at all. I have acces to download mode and recovery ( custom recovery by phil)
Pc can't recognize phone and I can't connect to odin on my pc :crying:
Pleas if someone can try to help me. Thank u
Edit:
Finnaly I have install drivers on my pc and can see phone in odin but while i try flash any software keep loosing connection and operation goes fail.
So why you don't fix connection ?
Send form Galaxy S2. But I don't have it :-\
How? Looks like phone loosing conection by itself
Sent from my E10i using xda app-developers app
Is your cable working with other phones if not working try to plug in other usb port. And try to clean usb cable
Send form Galaxy S2. But I don't have it :-\
Yesterday I played with something similar to the i9000 I had to remove the sd card. After that everything worked.
Most of the time pc cant recognise phone. But if im lucky enough to get comeation in download mode odin says added then start flashing new software and when its comes to write nand loose connection and odin says removed and then connecting itself again. Quiet wired
Sent from my E10i using xda app-developers app
I have try four cables already with different port always same thing. The funny thigh is that I still can flash any custom rom via custom recovery. Phone booting properly but screen do not responded for touch
Sent from my E10i using xda app-developers app
Related
HI all members and fellow S2 experts.
I am quite new to android flashing and rooting.. and i have run into a problem and i really really need your help.Here is the story ....
I have stock rom 2.3.5 and cynagonmod7 in my phone.One day i made back up of my stock rom and went to recovery mode and changed to cynagon mod... I used cynagon for few days than made back up of it so that i can go back to stock rom.So i did back up it went fine.than i went to restore my stock rom and thats where the problem started.It didnt let me go back.
My phone does not turn on now.
When i try it just stays on the main screen where it says samsung galaxy s2 bla bla and that yellow triangle (indicating its rooted).
It does not go to recovery mode.
Once on charge it shows me the cell which appears when you charge your phone whilst it being off,it just shows me a empty cell and within that cell that rounded circle shaped icon not moving just as an icon.
And it lets me go to download mode but odin3-v1.85 does not recognise any device being connected or anything....
So basically i am doomed
I have tried taking battery out all sort of different combinations to reboot go to recovery mode all that but its just not happening and in download mode Odin does not detect my phone.
So i really dont know what to do.So can you please please please help and guide me how to get my phone back to life i really need to
Detailed answers would really help.Thanks for reading and please help me out.If any queries you can ask me.
Did you install the sg2 drivers in your computer? (you do this by installing the kies soft)
Sent from my GT-I9100 using XDA App
Yes i did installed all the driver.But at the moment i am on another laptop which does not have kies or any other driver for s2 but it still is not recognised..Laptop recognises something being connected to usb but it actually does not recognise any device or shows anything.
try to install kies it might be a driver issue
Sent from my GT-I9100 using XDA App
Try to install drivers only...
Sent from my GT-I9100 using XDA premium app
I HAVE DONE IT YEEEEEEEEEEEEEEEAAAAAAAAAAAAAAAAAAH
Thanks alot guys it is exactly as you said.Installed kies in friends laptop went in download mode it installed the driver and than odin recognised the phone and put 2.3.5 again and done its working yeaaaaaaaaaaaaaaaahhh
You guys are star.THanks alot to all......
1- Try charging your phone for an hour or so (Just in case).
2- On that second laptop that recognizes something been connected to it, go to device manager and if you see any unknown usb device, delete it. Unplug your phone and plug it again (in download mode).
Good luck I hope this works
EDIT:
Glad to see you're up and running
help needed
i have the same problem
samsung galaxy s2
firmware = GINGERBREAD.BZKJ2
with the odin way i root it and it stated there PASS
but my phone just could not reboot after all
i tried the above suggestions, but it is still the same
when in download mode and i connected to computer, the odin3 shown ID:COM
experts, pls i got no idea on this, i tried whatever i can do.
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
Good day everyone. I had Galaxy S2 since i know my self,but I didnt met this kind of problem. 2 Days ago i wanned to flash a new ROM to my S2, and odin stuff messed up. After Rebooting I got the message Firmware update issue thingy. I can go to download mode thats no problem. The biggest problem here is that whenever i plug in my USB cable into my phone, the computer recognizes it and then throws it out. I plug in, i hear the sound buuuunnggg, I start Odin, Thick PDA, select the ROM, and click start and it doesnt even reaches to end with Cache I hear the sond boooonnggg and Odin says its Failed, (Phone Removed). And the phone isnt connected anymore. Can someone help me out please? I really dont know what to do.
Try cleaning phone port or try different cable/ usb port
Sent from my GT-I9100 using xda app-developers app
I will clean the usb port and I'l go buy a new cable. Il post when i did all these.
Hello,
I seem to have myself a faulty S2. It charges fine from the wall charger but when i plug in a data cable nothing happens and it isnt recognised by windows and nothing appears on screen. It doesn't even charge from USB unless I turn it off and start it up again with the USB cable already connected. I have tried multiple data cables and operating systems. In linux lsusb lists nothing, even when it's charging after being rebooted. It is a stock ROM and has no warrenty
It is model GT-I9100
Android Version 2.3.5
Baseband I9100NEKI2
Kernel 2.6.35.7-I9100XWKI8-CL616395
build GINGERBREAD.XWKI8
Does anyone know if this is a known fault or if there are any fixes before I open the thing up and try to clean the USB connector, probably breaking the phone in the process....
did you tried to put it in download mode and connect to pc? see if it's recognized. and if goes well flash a freshly stock ROM and see if it works
Sent from my GT-I9100G using xda app-developers app
What crzr, said its most likely to be a software problem I had a friend who had the same problem (but it was working fine at first) he flashed it and everything is OK... Hope you get it working...
Using GT - I9100
I thank those who give helpful comments
Soft problem or broken csc. Flash rom again fixed this.
Sent from my GT-I9100 using Tapatalk 2
Thanks folks, I though it would be hardware. Flashing might be hard, its not recognised in download mode either. I can get into recovery. I suppose i could try and install mobile odin and see where that takes me.
OK it happened to me and the problem disappeared by reflashing stock ROM wiping all my data. but of course first I'd made a backup of all
Sent from my GT-I9100G using xda app-developers app
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app