don't know why...
after flash AOKP 4.1 mileston , system reports SDCARD DAMAGED...
when i try to format it in phone , it likes take forever to complete it , just stuck there.
i put it into card read and to my PC, Windows 7, reports error and needs to format it , fine , i formated it , 2 twice , tried both exFAT and NTFS, after that, computer can access SDcard, but then i inserted it back into my phone and boot it , still says something.
although something time it doesn't report error but just like SDcard isn't inserted ...
i also tried the one way i googled out that use command "chkdsk X: /f" but still same thing ...
any idea will be thankful.
it seems exFAT isn't supported by any 3rd part ROM beside Samsung's , am i correct ?
then is there any way to use my 64GB SDcard on AOKP ?
ok... here is now situation
i formatted it into FAT32, but if i inserted the SDCard, the phone will be in the boot loop , AOKP mileston 1 JB... if i uninsert it , it will boot up in few seconds...
any idea ?
can't find any way to make it work...
even tried Siyah kernel ... still boot loop
alternative, will AOKP works with 32GB or 16GB ?
qtwrk said:
alternative, will AOKP works with 32GB or 16GB ?
Click to expand...
Click to collapse
Yes it will work with aokp. If you gonna buy new memory card go for Samsung 32gb class 10. There are some fake once at eBay.
Sent from my GT-I9300 using xda premium
Related
I have recently upgrade to android 2.3.3 and am using EWJET as a rom.
I cannot access the SD once Android OS has booted. All apps and the system/settings says SD Card isn't mounted. Tried multiple installs, nothing works.
All 2.1/2.2 Roms are fine.
If i tap back during start-up and access xrecovery I have normal access to the SDcard and can flash packages etc. So the phone is able to access the card ok.
My SD card is the 8gb that came with the phone and isnt partitioned in anyway.
However in the past I did have it partitioned, but not now. Incase I am installing 2.3.3 and the rom wrong, ill tell you my steps.
Factory Firmware 2.1 flashed
rooted, busybox and recovery installed
Flashed X10i_3.0.1.G.0.75_only_kernel_baseband
then install the EWJET rom as per his instructions..
I pray I am only doing the above steps wrong as I desperately want the SD working on 2.3.3.
Any help would be appreciated.
Brent
having something similar:
http://forum.xda-developers.com/showthread.php?t=1201915
brent0r said:
I have recently upgrade to android 2.3.3 and am using EWJET as a rom.
I cannot access the SD once Android OS has booted. All apps and the system/settings says SD Card isn't mounted. Tried multiple installs, nothing works.
All 2.1/2.2 Roms are fine.
If i tap back during start-up and access xrecovery I have normal access to the SDcard and can flash packages etc. So the phone is able to access the card ok.
My SD card is the 8gb that came with the phone and isnt partitioned in anyway.
However in the past I did have it partitioned, but not now. Incase I am installing 2.3.3 and the rom wrong, ill tell you my steps.
Factory Firmware 2.1 flashed
rooted, busybox and recovery installed
Flashed X10i_3.0.1.G.0.75_only_kernel_baseband
then install the EWJET rom as per his instructions..
I pray I am only doing the above steps wrong as I desperately want the SD working on 2.3.3.
Any help would be appreciated.
Brent
Click to expand...
Click to collapse
you try pulling it out and blowing on it like an old nes game...
jk smiles but have you tried perhaps throwing the sd into a computer and just formatting with different cluster sizes or in general formatting the card. Might need to use an adapter.
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
J!K said:
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
you might want to get an adapter. A while back i tried setting up a sd-ext partition on a 4gig card and long story short the only way i was able to run a format that gave me back the 4gigs was throwing it into an adapter
Had the same thing when I updated with stock-2.3.3.... At the time I had it partitioned in 2 partitions...
I connected the phone then with my pc, and there it was, alive and well.... So I backed up the entire card, that is, the first partition, where all my data were; I powered off the phone, took it out, found a adapter, deleted the 2nd partition with Partition Wizard Home Edition Minitool, made the sd-card 1 partition only, formatted that partition, and then I copied all my backed-up data back to the card
Then I put the card back in the phone, booted and voila: the card was recognized again by 2.3.3....! and now it functions ok!
Hope this helps, greetz, good luck,
kwarkje
J!K said:
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
formatting did not help
Anything new on this?
for me it is a little different. The card that came with the phone works fine with the GB update, the thing is that I got another phone, this one came with a 4 Gb card so I took the one in the x10 with all my pics and put it in my new phone and put the other new card in the x10 but it doesn't recognize it...
I've tried with 2 different cards, in xRec i can read it, back up, etc, but once in android its like there's nothing there. Tried formatting it with no results....
What could it be that it reads the original x10 card and no other?
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
brent0r said:
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
Click to expand...
Click to collapse
I have 2.3 and the card that originally came with the phone (16Gb SDHT) works fine, the thing is that it doesn't read any other card.
brent0r said:
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
Click to expand...
Click to collapse
Same issue no clue what to do
Today i found a workarround using DISKPART (6 years later hehe)
Note that this will wipe your storage card so BACKUP !!
Hold [Win + R] and type in : diskpart (or launch cmd as admin and types: diskpart )
Every lines should be followed by enter key.
list disk
select disk *
(" * " is the number of your drive. be carefull do not choice your hard drive number which is commonly 0)
clean
create partition primary
assign
format fs fat quick
exit
Tested and work fine on windows 8 (but should work on 7, 8.1, 10)
Thanks Hope i help even 6 years later !! cheers
recently i have formatted my toshiba class 4 microsd card 8gb with cwm recovery and now wether it is on the pc via adapter or in then phone or with the usb cable in the phone i can see the data very well but when i try to transfer something it is extremely slow and the sd card gets disconnected and recconencts all the time without aborting the process.it is working without rr or anything in my phone and it just is very slow when i move apps to sd. the sd is fat 32 and tried formatting from cmd/sd formatter/phone and still the same. no bad sectors in the card and no fs errors i cant think of anything...
soz for the textwall but cant describe this situation otherwise.
thanosl2 said:
recently i have formatted my toshiba class 4 microsd card 8gb with cwm recovery and now wether it is on the pc via adapter or in then phone or with the usb cable in the phone i can see the data very well but when i try to transfer something it is extremely slow and the sd card gets disconnected and recconencts all the time without aborting the process.it is working without rr or anything in my phone and it just is very slow when i move apps to sd. the sd is fat 32 and tried formatting from cmd/sd formatter/phone and still the same. no bad sectors in the card and no fs errors i cant think of anything...
soz for the textwall but cant describe this situation otherwise.
Click to expand...
Click to collapse
You may have removed some drivers when formatting it
Jeanjacq said:
You may have removed some drivers when formatting it
Click to expand...
Click to collapse
And if that is the case any possible fix??
Had a similar problem some time ago and I fixed it by re-formating, re-partitioning and so on with EaseUS Partition Master (http://www.partition-tool.com/personal.htm - it's free).
If I remember correctly, I had to do it twice since after the first time it still gave me problems.
Hope this helps!
Unfortunately i tried that program too and right now i dont even have the ex4 partition as i dont need it.i am using the phone normally thats why i dont go for service but i just cant transfer files from pc...
thanosl2 said:
Unfortunately i tried that program too and right now i dont even have the ex4 partition as i dont need it.i am using the phone normally thats why i dont go for service but i just cant transfer files from pc...
Click to expand...
Click to collapse
Try flashing CWM form my signature and retry formatting with it. Other CWM may be buggy.
voyager20021 said:
Try flashing CWM form my signature and retry formatting with it. Other CWM may be buggy.
Click to expand...
Click to collapse
I use version 5.0.2 do u think there are good chances to fix my problem?? Cause it will be an issue to copy all my sd card and then transfer it back..
Any new ideas?? I tried the old cwm recovery but still the same
Try Amon_Ra recovery or download a gparted iso, reboot your computer and start in live mode and format it
Garuxa said:
Try Amon_Ra recovery or download a gparted iso, reboot your computer and start in live mode and format it
Click to expand...
Click to collapse
I ll give it a go since right now my sd card is empty
Hi all, I have a problem. I bought a 32gb class 4 MicroSD card last year which I used on my Nook Tablet. After hating (really hating) the B&N rooted/custom launcher experience, I decided it was mandatory for me to install a custom ROM on it if only to learn how to install custom ROMs. Before I took the plunge, however, I found that it was possible to have a second boot on my SD card and boot CM7, so I didn't have to flash over the stock ROM (I was scared i'd break the tablet). Anyhow, after having a much better experience on CM7, I decided to flash CM9 on my Motorola Defy (wasn't easy) and was so amazed at how beautiful it was I knew I had to have it on my Nook. I flashed CM9 on emmc on my Tablet and it was so amazing I didn't put my CM7 card back in, ever.
After this, though, CM9 expired (of course, I didn't know it would) and when I went and tried to boot CM7, cyanoboot just wouldn't boot from it and now I can only access my SD card's emmc (I think, it's where the CM7 OS is). Now I have CM9 working again but I still can't use my SD card because when I tried to re partition using EASEUS it just won't recognize the card. I really don't know what to do now, I can't restore my SD card to how it was before double boot because I can't access any partition and the only thing I can do is look at the android 200mb partition.
Any thoughts?
You didn't mention that you do have a "external card reader". Hmm, if you can... use an 'external reader', then use 'SDFORMATTER ver. 3.1' .
.
What does your cell phone say about the card ? Can the phone format the card ?
old_fart said:
You didn't mention that you do have a "external card reader". Hmm, if you can... use an 'external reader', then use 'SDFORMATTER ver. 3.1' .
.
What does your cell phone say about the card ? Can the phone format the card ?
Click to expand...
Click to collapse
WTH? How did I not think of that :silly:
My card is up and running on my nook after formatting it on my moto defy. I would've liked to backup some info but no biggie. Thank you!
PS: I was using my laptop card reader to see my card but I couldn't access any partition on EASEUS, but I shouldn't have despaired.
Hello ,
I guess i ****ed up my microSD card .
I had one 16 Gb A-data microSD card and for whatever reason , i try to format for APP2SD , that special partition, ext 3 or whatever .
But... not just i was not able to make it work , but when i tried to make it the way it was before ... it was stucked or seems to be a ireversible process.
I tried different methods but not one seems to work . I got to make a mention that the card was working just fine before i had that stupid idea.
No matter what , now windowx is showing to have only 1gb capacity, but... when i tried to format that 1 gb , everytime it fails.
flashnull , HPUSBDisk, SDFormatter, MiniTool Partition Wizard Home Edition, linux Gparted , every single tool i was thinking of was useless.
You guys are my last hope .
Thanks in advance for your help ...
Actually, the more you format it, the more harm you make, because sd cards are very sensitive when it comes to formatting them. I've successfully killed my 4gb microsd that way
Sent from my LG-P760 using xda app-developers app
so , i understand that is NO solution to this problem ?!
Well, as far as I know, no, but I might be wrong as well
hi, i have a samsung galaxy s3 GT-I9300 international, i want to flash aosp 4.2, i tried a lot of roms and i have the same problem: my 64 gb sandisk ultra xc1 u1 micro sd is not recognised, wueh the phone boots up i get a message saing empty micro sd, when i tap on the notification it will ask me to format i accept and get a damaged sd message. it doesnt show in windows neither nor in clockwork mode 6.0.2.8.
i must say tha the micro sd works fine on any sammy rom.
is there something i can do to fix this or should i just wait for cyano gen mode to fix it?
thanks!!!!
i love xda!!!
posted multiple times.
cm requires fat32
Glebun said:
posted multiple times.
cm requires fat32
Click to expand...
Click to collapse
thanks!!! i didnt find it, sorry.
no problem. you need to improve your googling skills
http://lmgtfy.com/?q=64gb+sandisk+micro+sd+not+recognized+by+cm+10.1+xda