[Q] Flashed Modem now no signal - AT&T Samsung Galaxy Note I717

I flashed my stock att modem to a custom one hoping id get 4g service on my att galaxy note sadly i now have no service. Is there anyway i can find the original modem and flash and get my service back?

You should be able to find what you need here:
http://forum.xda-developers.com/showthread.php?p=28040353

If you made a Nandroid backup prior to flashing the modem, which I hope you did and should always do before flashing something new. Then it's just a matter of rebooting to recovery and doing a restore. Fast, easy solution. I'm thinking what you are missing with your newly flashed modem are just the correct AT&T APN settings. Quick search, find, and enter them, perhaps the better solution since you flashed the new modem to seek a better signal in the first place, may as well test it out. EDIT: CPA Poke's link above has this link listed http://forum.xda-developers.com/showthread.php?t=1684711. For sure worth a look.

uwannabananababy said:
If you made a Nandroid backup prior to flashing the modem, which I hope you did and should always do before flashing something new. Then it's just a matter of rebooting to recovery and doing a restore. Fast, easy solution. I'm thinking what you are missing with your newly flashed modem are just the correct AT&T APN settings. Quick search, find, and enter them, perhaps the better solution since you flashed the new modem to seek a better signal in the first place, may as well test it out. EDIT: CPA Poke's link above has this link listed http://forum.xda-developers.com/showthread.php?t=1684711. For sure worth a look.
Click to expand...
Click to collapse
FYI nandroids don't backup nor restore the modem.

No such thing as a custom modem.
You just flashed a different modem, those binaries are closed source, therefore cannot be modified by us...and I'm pretty sure it would be illegal if we did.

EvoXOhio said:
FYI nandroids don't backup nor restore the modem.
Click to expand...
Click to collapse
True, but a backup's restore got me going again after I played around with modem's trying out AWS for Wind Mobile. Afterward, my SIM became unrecognized when trying to get back on Rogers with various modem flashes, all to no avail. Forgive my comment, it was late and maybe confessed the 2 different situations. But I restored my original backup of my stock gingerbread, baseband (modem) was back and sim recognized. Restored then again to my ICS based ROM I was running before playing for WInd. Then got flash happy with whatever modem in the link below. So...worked for me..
BLACKSTAR XI -SGH-I717 xda-developers app SAMSUNG done right

this link will have all the modems you will ever need
http://forum.xda-developers.com/showthread.php?t=1769255
uwannabananababy said:
True, but a backup's restore got me going again after I played around with modem's trying AWS for Wind Mobile and my SIM being unrecognized when trying to get back on Rogers with various modem flashes to no avail. Forgive my comment, it was late and maybe confessed the 2 different situations.
BLACKSTAR XI -SGH-I717 xda-developers app SAMSUNG done right
Click to expand...
Click to collapse

I tried messing around with the apn settings, but i can't because my sim isnt recognized. Ive also flashed the modems but still no service after trying all of them. What else can i do?

Odin flash from a PC your phones stock ROM is what I would do. Don't forget to save/backup all your important stuff first, because it will wipe everything and bring your phone back to a like new state.
BLACKSTAR XI -SGH-I717 xda-developers app SAMSUNG done right

Odin push is the correct method to restore service, but fully wipe the device first....g

I'll try that. I'll let you know how it goes. Thanks for the helpeveryone!1

Related

[Q] Help with Showcase

Some background on my phone first. I thought that I bricked it a few weeks ago when I flashed a kernel for it that went to a fascinate. I thought that the showcase was and is a twin to it. But my phone would not boot up. Did some more research and ended up flashing CWM 3.0 and then PnP 3.0 and eb11 build and had a phone again. Well had no problems till yesterday when my phone just did a reboot by itself and then I had no service and under about phone several of the categories said unknown. I took it to cellsouth and left with a phone that would not even boot up! All I can do is boot in CWM but if I try flashing a anything it says either error with restoring boot image or something about updating sript and binary files. Can somebody help me out?
Check out this thread, second post after original op, it has files and process to odin the Showcase. This is most likely your best option. GO HERE
just found a link with the showcase stock file..im downloading now and will let you know if it works. had the same problem as you. now im using fascinate bases and cant get my 3g
Well I got it to where I can at least talk on it!... I flashed it back to a stock DL09 with odin. Which it now looks and acts just like a Verizon phone. So I can talk and text but has NO data of any kind unless I connect to wifi. I think that I need to flash a DJ20 or EB11 radio to it but not sure, Maybe somebody could lend there knowledge again. Thanks so far.
i was just like you...had to use that verizon rom. however i did find a c.south stock rom and got to normal.YES!! but still working on getting 3g back up. i think it messed up when i flashed another modem or somthing. i'll post link in a sec.
rooferman said:
Well I got it to where I can at least talk on it!... I flashed it back to a stock DL09 with odin. Which it now looks and acts just like a Verizon phone. So I can talk and text but has NO data of any kind unless I connect to wifi. I think that I need to flash a DJ20 or EB11 radio to it but not sure, Maybe somebody could lend there knowledge again. Thanks so far.
Click to expand...
Click to collapse
here is the link. first post has instruction and downloadhttp://forum.xda-developers.com/archive/index.php/t-1121576.html

Help! Noob Installed KG6 Modem on AT&T U.S. Phone

Well....I think I might have done something really stupid. It should be obvious at the moment that I didn't understand completely what I was doing.
I just picked up my SGSII today from AT&T. In reading around I had hopes of a new ROM as I was very happy with CM on my captivate....unfortunately while in the process I followed instructions from an (obviously) european version of the phone and installed the KG6 modem....now I have no data connection.
I'm feeling really foolish...is there any way that I can get the stock modem for the AT&T U.S. Galaxy S2? Any help would be greatly appreciated.
Anybody? My phone is completely non-functional at the moment.
I've learned my lesson; I'll leave the modding to the more adept, I just need to get my phone back.
Try the stock plus root rom for odin/heimdall and that should over write the modem you flashed
Sent from my SAMSUNG-SGH-I777 using xda premium
FYI, you shouldn't expect rapid replies on a Monday morning.
The modem is currently missing from my "unbrick" packages, but this is an omission. I'll dump modem.bin tonight and post it up in my unbrick thread.
insaneturbo13 is not correct - as I said, my stock unbrick package is currently missing the modem.bin file. I will correct this tonight.
Entropy512 said:
FYI, you shouldn't expect rapid replies on a Monday morning.
The modem is currently missing from my "unbrick" packages, but this is an omission. I'll dump modem.bin tonight and post it up in my unbrick thread.
insaneturbo13 is not correct - as I said, my stock unbrick package is currently missing the modem.bin file. I will correct this tonight.
Click to expand...
Click to collapse
What would be the easiest way, If possible, to install european ROMS on the ATT version? Maybe, install the ROM without their kernel and modem and replace them AT&T's ?
Entropy512 said:
FYI, you shouldn't expect rapid replies on a Monday morning.
The modem is currently missing from my "unbrick" packages, but this is an omission. I'll dump modem.bin tonight and post it up in my unbrick thread.
insaneturbo13 is not correct - as I said, my stock unbrick package is currently missing the modem.bin file. I will correct this tonight.
Click to expand...
Click to collapse
Thank you! Thank you! Thank you!
Donation coming your way.
Thank you!
daraj said:
What would be the easiest way, If possible, to install european ROMS on the ATT version? Maybe, install the ROM without their kernel and modem and replace them AT&T's ?
Click to expand...
Click to collapse
I believe that alone should work - I haven't had time to test yet.
cgrums said:
Well....I think I might have done something really stupid. It should be obvious at the moment that I didn't understand completely what I was doing.
I just picked up my SGSII today from AT&T. In reading around I had hopes of a new ROM as I was very happy with CM on my captivate....unfortunately while in the process I followed instructions from an (obviously) european version of the phone and installed the KG6 modem....now I have no data connection.
I'm feeling really foolish...is there any way that I can get the stock modem for the AT&T U.S. Galaxy S2? Any help would be greatly appreciated.
Click to expand...
Click to collapse
Feeling kinda foolish... I did the same thing yesterday AFTER I flashed the wrong kernel. (european kernel without proper button support) then everything went to hell, now I am back to the proper kernel, and the deoxed att firmware from the guide here on the forum... i just need the modem up and running with the right firmware and Ill have a working phone again
jdip1978 said:
Feeling kinda foolish... I did the same thing yesterday AFTER I flashed the wrong kernel. (european kernel without proper button support) then everything went to hell, now I am back to the proper kernel, and the deoxed att firmware from the guide here on the forum... i just need the modem up and running with the right firmware and Ill have a working phone again
Click to expand...
Click to collapse
I got all excited when my brother got his gs2 and I flashed a euro rom before I realized what I had done. I used entropy's stock package to get him fixed. Then he calls me from home and starts *****ing about how he can't use data unless he's on wireless. I put 2+2 together.
I am, like the others here, super eager to get that modem file when you post it. It would be a huge help. If it's not too much work on your part entropy, could you post a cwm version of the modem as well? I'd rather not have to flash him back to stock again just to fix the modem.
He's an iphone expat so I'm trying to make his android life smooth as possible.
I'm going to get home around 6 PM Eastern.
Initially I'm going to post up a Heimdall (and hopefully also Odin) flashable image of just the modem binary for those in a hurry, then I'll work on a CWM zip (need to find a reference one to pick apart in case it's different from the Infuse), then I'll upload a new more complete "unbrick".
Thanks for the donation cgrums.
OK, here's an emergency flash package for modem recovery - http://www.multiupload.com/JTFK1K1FOA
It's just a little too large to be an XDA attachment, sorry if multiupload is a problem for you.
It contains both a raw modem.bin, and a .tar file containing modem.bin (yes, redundant!)
It is NOT a CWM-flashable ZIP. Repeat, do NOT try to flash this ZIP in CWM. Seriously, it won't work!
The following method for flashing the modem IS tested:
Unzip the attached package
Use Heimdall to flash from the command line
Code:
heimdall flash --modem modem.bin
The following method for flashing the modem should work but is NOT tested:
Use Odin to flash the contained .tar file, using the Phone slot for the .tar
Man, before I even leave work! Awesome! Thanks again!
I made an error above - I believe in Odin, modem has to be in the Phone slot not PDA.
As I said in the post above - Heimdall is tested, Odin is not.
As to CWM - the maintainer of the I9100 modem collection frowns upon CWM for modem flashing - http://forum.xda-developers.com/showthread.php?t=1131950&page=2 . It sounds like CWM-flashing of modems might have issues on our device, I haven't had time to investigate but right now I'm going to trust pulser_g2's judgement for until I have more time to figure out GS2-isms of modem flashing. I've got a ton of stuff to do and I'm going to drop CWM-flashing of modems in priority for now since it should rarely be needed.
Entropy512 said:
I made an error above - I believe in Odin, modem has to be in the Phone slot not PDA.
As I said in the post above - Heimdall is tested, Odin is not.
As to CWM - the maintainer of the I9100 modem collection frowns upon CWM for modem flashing - http://forum.xda-developers.com/showthread.php?t=1131950&page=2 . It sounds like CWM-flashing of modems might have issues on our device, I haven't had time to investigate but right now I'm going to trust pulser_g2's judgement for until I have more time to figure out GS2-isms of modem flashing. I've got a ton of stuff to do and I'm going to drop CWM-flashing of modems in priority for now since it should rarely be needed.
Click to expand...
Click to collapse
I flashed the tar in odin using phone, the phone rebooted, but it will only make calls. The phone cannot use the internet when the wifi is off. Do you have any suggestions? I am going to try flashing your entire recovery image when you update it tonight.
What does your baseband version say now? If it flashed properly it should say UCKH7.
If it doesn't, it didn't flash for some reason. I know it flashes properly with heimdall, odin is kind of untested.
Entropy512 said:
What does your baseband version say now? If it flashed properly it should say UCKH7.
If it doesn't, it didn't flash for some reason. I know it flashes properly with heimdall, odin is kind of untested.
Click to expand...
Click to collapse
I had my brother do the factory reset, wiping the user data. That seemed to fix it (although we did flash your modem prior). Thanks so much!
I am happy to report that I am on my way back to functionality!
I've noticed a difference in connectivity though. At times, typically out-of-doors, I get decent signal strength and HSPA+ connection. Call service is a bit spottier than I remember it before the hijinks.
Inisde buildings is a completely different story...I can't seem to maintain a data connection of any type.
My baseband shows I777UCKH7 so I believe the flash went well. I'm planning to flash back to stock to get a good starting point going forward.
Anybody else experiencing similar issues? Thoughts?
This community is awesome!
I think someone did indicate that things were funky until they wiped - not sure though.
One click + CWM ICScrewed = in call audio problem
Hi I used your on click root kernel and then used CWM to flash the ICScrewed ROM .zip file.
Now I am having a problem where when I make or receive a call there is no audio. I still have data and wifi connectivity though it seems.
Could it be a problem with my modem? If so how do I flash another and where can I find the appropriate one?
Thanks, and sorry I cannot post on the ICScrewed page as I do not have permission to post in development yet.
jgordo32 said:
Hi I used your on click root kernel and then used CWM to flash the ICScrewed ROM .zip file.
Now I am having a problem where when I make or receive a call there is no audio. I still have data and wifi connectivity though it seems.
Could it be a problem with my modem? If so how do I flash another and where can I find the appropriate one?
Thanks, and sorry I cannot post on the ICScrewed page as I do not have permission to post in development yet.
Click to expand...
Click to collapse
I have no "one click" kernel. Any "one clicks" are repackaged by someone else and I have no idea what they contain in many cases.

[Q} need baseband for p4vzw or i905

So i flashed a p4 rom and apparently it was not intended for my p4vzw. i know its sad. anyways no worries, got it back on akop, but now i have a unknown baseband. I am searching and searching but i can't seem to find any files on this.
so questions are
1 anyone know if there are radio files.
2 or do i have to get it back to stock and then root again.
thanks in advanced
bensl84 said:
So i flashed a p4 rom and apparently it was not intended for my p4vzw. i know its sad. anyways no worries, got it back on akop, but now i have a unknown baseband. I am searching and searching but i can't seem to find any files on this.
so questions are
1 anyone know if there are radio files.
2 or do i have to get it back to stock and then root again.
thanks in advanced
Click to expand...
Click to collapse
The easy way would be going back to stock, the other way, i know that you can find modems on http://droidbasement.com/db-blog/?p=3008
One way to fix it
I've had similar issues lately playing around with installing CM10.1 and the modem getting messed up. I did use adb to make a modem.bin backup from stock ICS, but then could not figure out how to flash it. In the end what I did is flash the original stock ROM. Search for STOCK VZW Galaxy Tab 10.1 4G LTE Factory Firmware PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar
That will put it back to the original Gingerbread factory image. It will have to go through multiple OTA updates to get back to ICS. I know this is a pain to do, but my nandroid backup of the OTA updated stock ICS when restored did not restore the modem, and the modem.bin I created from instructions at mygalaxyway.blogspot.com/2012/09/how-to-share-your-nandroid-backup-and.html was kind of useless.
Aethera said:
I've had similar issues lately playing around with installing CM10.1 and the modem getting messed up. I did use adb to make a modem.bin backup from stock ICS, but then could not figure out how to flash it. In the end what I did is flash the original stock ROM. Search for STOCK VZW Galaxy Tab 10.1 4G LTE Factory Firmware PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar
That will put it back to the original Gingerbread factory image. It will have to go through multiple OTA updates to get back to ICS. I know this is a pain to do, but my nandroid backup of the OTA updated stock ICS when restored did not restore the modem, and the modem.bin I created from instructions at mygalaxyway.blogspot.com/2012/09/how-to-share-your-nandroid-backup-and.html was kind of useless.
Click to expand...
Click to collapse
Thanks. But i did the factory image and I still get unknown radio. Odin flashed successfully yet no modem.
I'll flash again maybe it was a fluke
SCH-i905?
You have an SCH-i905?
Yea I do. No matter how many times I flash the factory stock in Odin. The radio doesn't stick
does that mean id be able to use the p4wifi rom? i dont care about the radio files i just want one of the p4wifi roms...
Id love to have the ics radio files to flash too. when I odin the stock image it fixes nothing for me.
So basically I found that my csc file is gone. The Lte factory image doesn't include it. I bet it's on purpose.
What ever the case if we get a csc file for the tab and flash it then flash radios or flash firmware then csc it should work.
That's my guess at least. What's weird is there is no factory Firmware to be found on the Samsung site for the i905. Not sure why.
bensl84 said:
So basically I found that my csc file is gone. The Lte factory image doesn't include it. I bet it's on purpose.
What ever the case if we get a csc file for the tab and flash it then flash radios or flash firmware then csc it should work.
That's my guess at least. What's weird is there is no factory Firmware to be found on the Samsung site for the i905. Not sure why.
Click to expand...
Click to collapse
Please let this happen please
So i am still researching this.
I am going to write Samsung mobile to see if they will release the firmware for the tab. I am sure it has to do with Verizon not wanting anyone to keep that i905 that rooted it or flashed the stock firmware.
I can't be the only one that is missing the CSC file after an odin stock firmware flash. and i think its very odd that samsung has every firmware i can think of except the i905.
Im just taking stabs here.
I am also assuming thats the problem, thats the one part of the /system that's missing.
it would be cool if anyone had a i905 with lte and posted their CSC file.
how would i go about requesting that? just post
"[request] CSC file for i905 galaxy tab 10.1"
i have never asked for a request before.
bensl84 said:
So i am still researching this.
I am going to write Samsung mobile to see if they will release the firmware for the tab. I am sure it has to do with Verizon not wanting anyone to keep that i905 that rooted it or flashed the stock firmware.
I can't be the only one that is missing the CSC file after an odin stock firmware flash. and i think its very odd that samsung has every firmware i can think of except the i905.
Im just taking stabs here.
I am also assuming thats the problem, thats the one part of the /system that's missing.
it would be cool if anyone had a i905 with lte and posted their CSC file.
how would i go about requesting that? just post
"[request] CSC file for i905 galaxy tab 10.1"
i have never asked for a request before.
Click to expand...
Click to collapse
this will get you sorted out:
http://forum.xda-developers.com/showpost.php?p=19275562&postcount=1
http://forum.xda-developers.com/showpost.php?p=31600421&postcount=1
pershoot said:
this will get you sorted out:
http://forum.xda-developers.com/showpost.php?p=19275562&postcount=1
http://forum.xda-developers.com/showpost.php?p=31600421&postcount=1
Click to expand...
Click to collapse
I have done that. When i flash the stock firmware i still don't have a baseband and i can't do any updates.
I have no problem rooting. I just don't any radios.
maybe i am missing something here but once i flash back to firmware stock the radios don't stick so when i when boot up i get unknown radio and no updates are ever found.
bensl84 said:
I have done that. When i flash the stock firmware i still don't have a baseband and i can't do any updates.
I have no problem rooting. I just don't any radios.
maybe i am missing something here but once i flash back to firmware stock the radios don't stick so when i when boot up i get unknown radio and no updates are ever found.
Click to expand...
Click to collapse
I have the same problem. I tried flashing modem it works fine but when I try flashing lte_modem.bin I get an error in red writing and it doesn't flash. I've tried this with every version of Odin. I used the modem files from the full Odin image. I think it was EG01. I download it multiple times nothing has worked.
k,
so if anyone is interested, i finnaly got around to digging and came up with a processes to get the modems back. its technical and i am sure i am doing something wrong cause i can't get it to get on the network. could be a lte chip at this point. anyways.ill try tomorrow
it must be rooted. go to dev settings and check debug and root accsess: apps and adb.
then download EFS professional. go to restore and restore. nothing will change.
flash original firmware with odin.
once it installs you can see your radios... this it where it stops. I can't get it to access LTE. it has correct time and knows its on the verizon network. but no lte.
I then rooted to see if i could carry my radio files to 4.2.2 and i can't. radio unknown. tomorrow i am going to go to VZW and ask them if its a bad sim. will update tomorrow or when i get around to it.
Update:
So it was a bad sim. once a new one was put in i got LTE but now it wont update. Ha one problem after another. So now i can't flash 4.2.2 cause i loose radio. I believe you have to be on ICS before you can flash to 4.2.2, anyways its been a few days and it still thinks its up to date.
So now i need to know how to force an update..... will update if anything else happens

[Q] Phone Stuck In Roaming With Correct IMEI (I've tried almost everything!)

Hey guys,
So I got a real doozy here...
I flashed my Verizon Note 2 (SCH-I605) to the SOKP Rom from a Jedi X Rom (v13 I believe). After the flash, I noticed my network was not working. Eventually I found out that the device was registering as a GT-7105. Not sure what went wrong, as the rom was flashed with no errors. I also ensured that my recovery was on the appropriate version (TWRP 2.6.3.3 in this case) and I also did a factory reset. To try and rectify the issue I wiped the phone and tried various other roms. In every one of those cases I found that the phone was constantly roaming. I had checked my network mode and tried switching between Global and LTE/CDMA which did nothing. Being completely out of options, I just installed to a stock rom through Odin (VRAMC3 4.1.2) and let it update via Wifi to 4.3 and still nothing. (I am well aware of the Knox security feature and will address this in a moment)
Here are the different ways I tried to diagnose the issue after this that led nowhere:
1. Made contact with a Tier-2 specialist from Verizon that tried various diagnostic methods and found that my phone was simply not registering on the Verizon network, or ANY other network for that matter.
2. I went to a Verizon store and got my SIM card replaced.
3. I even went to a repair shop to see if the phone possibly had a faulty connection.
I have already verified that the IMEI is correct based on the sticker behind the battery. The PRL is on 15310. The very last thing I tried was entering "getprop" inside a terminal. I'm taking a guess here, but I noticed my ril.serialnumber was all 0s. Could this be the problem? If there's anymore information someone needs, I'll be happy to post it up. Just hoping I can get a little direction here. If I need to root my phone again to try something, I am more than willing to. My phone is out of warranty and not insured, I'm not really concerned about the Knox warranty trigger unless it will render my phone completely unusable.
jvar105 said:
Hey guys,
So I got a real doozy here...
I flashed my Verizon Note 2 (SCH-I605) to the SOKP Rom from a Jedi X Rom (v13 I believe). After the flash, I noticed my network was not working. Eventually I found out that the device was registering as a GT-7105. Not sure what went wrong, as the rom was flashed with no errors. I also ensured that my recovery was on the appropriate version (TWRP 2.6.3.3 in this case) and I also did a factory reset. To try and rectify the issue I wiped the phone and tried various other roms. In every one of those cases I found that the phone was constantly roaming. I had checked my network mode and tried switching between Global and LTE/CDMA which did nothing. Being completely out of options, I just installed to a stock rom through Odin (VRAMC3 4.1.2) and let it update via Wifi to 4.3 and still nothing. (I am well aware of the Knox security feature and will address this in a moment)
Here are the different ways I tried to diagnose the issue after this that led nowhere:
1. Made contact with a Tier-2 specialist from Verizon that tried various diagnostic methods and found that my phone was simply not registering on the Verizon network, or ANY other network for that matter.
2. I went to a Verizon store and got my SIM card replaced.
3. I even went to a repair shop to see if the phone possibly had a faulty connection.
I have already verified that the IMEI is correct based on the sticker behind the battery. The PRL is on 15310. The very last thing I tried was entering "getprop" inside a terminal. I'm taking a guess here, but I noticed my ril.serialnumber was all 0s. Could this be the problem? If there's anymore information someone needs, I'll be happy to post it up. Just hoping I can get a little direction here. If I need to root my phone again to try something, I am more than willing to. My phone is out of warranty and not insured, I'm not really concerned about the Knox warranty trigger unless it will render my phone completely unusable.
Click to expand...
Click to collapse
If updating the Profile and PRL on a stock based rom doesn't get it back, then you might have corrupted your EFS partition. I don't suppose you used TWRP to back up the EFS partition when you did a nandroid?
FYI: Doesn't matter what the phone is listed as (n7105) for connecting to the network. It's just a build.prop edit away from saying whatever you want it to.
es0tericcha0s said:
If updating the Profile and PRL on a stock based rom doesn't get it back, then you might have corrupted your EFS partition. I don't suppose you used TWRP to back up the EFS partition when you did a nandroid?
FYI: Doesn't matter what the phone is listed as (n7105) for connecting to the network. It's just a build.prop edit away from saying whatever you want it to.
Click to expand...
Click to collapse
Unfortunately, I did not back up the EFS partition. I'm guessing I should try and restore this somehow?
jvar105 said:
Unfortunately, I did not back up the EFS partition. I'm guessing I should try and restore this somehow?
Click to expand...
Click to collapse
Can't restore what wasn't backed up. The efs is unique to your phone. In some cases you can use another part of another phone's efs partition, but not always and is gonna be a huge hassle either way. But yea, I think you're in a pretty tricky situation. I was reading on another forum that the serial number being 0 shouldn't cause this issue though, so not really sure what to think. Usually when this sort of thing happens, the IMEI gets messed up too. Updating Profile and PRL didn't help?
es0tericcha0s said:
Can't restore what wasn't backed up. The efs is unique to your phone. In some cases you can use another part of another phone's efs partition, but not always and is gonna be a huge hassle either way. But yea, I think you're in a pretty tricky situation. I was reading on another forum that the serial number being 0 shouldn't cause this issue though, so not really sure what to think. Usually when this sort of thing happens, the IMEI gets messed up too. Updating Profile and PRL didn't help?
Click to expand...
Click to collapse
I guess that'll be the next step for me. I didn't want to go through the hassle without making sure. Please send me the links on how to do this if they are available.
jvar105 said:
I guess that'll be the next step for me. I didn't want to go through the hassle without making sure. Please send me the links on how to do this if they are available.
Click to expand...
Click to collapse
I don't have a Note 2 in front of me, but generally it should be in Settings / About Phone / Update or Software Update and for most Samsung CDMA phones, the Profile and PRL options are in or around there.
es0tericcha0s said:
I don't have a Note 2 in front of me, but generally it should be in Settings / About Phone / Update or Software Update and for most Samsung CDMA phones, the Profile and PRL options are in or around there.
Click to expand...
Click to collapse
Yeah, it's actually in the Status section. It does not allow me to edit anything in this area. I don't see anything that says Profile.
Hmm I guess VZW decided you don't need to have access to those functions. Weird. Sorry man, I dunno what to tell you at this stage.
Edit: Found this -
"The only acceptable way to update it on LTE phones is to take the SIM out, boot the phone back up, let it sit for 5 or 10 minutes, power off, reinsert SIM, reboot phone. That's the only one I know of, there may be other ways to do it but that is the easiest."
Not sure if it will help, but certainly isn't going to make it any worse. What baseband version do you have installed?
First thing you need to do is write down your IMEI number. You do NOT want to lose that. Seriously, write it down with a pen. Also your serial number and anything else you find in the EFS partition you might need that's specific to your phone. THEN: at this point it sounds like you'll have to find someone's EFS partition. I've seen it around on XDA multiple times as I've gone through threads similar to this one. Once you find an SCH-i605 efs you'll have to flash/replace/edit yours somehow, try editing your own first to match the same values as your peer's. Don't replace personal information tho. If you end up replacing it you'll have to go in and re-enter your own IMEI number somehow. I am not an expert on how you can do this, but stated here is/would be the process.
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
es0tericcha0s said:
Hmm I guess VZW decided you don't need to have access to those functions. Weird. Sorry man, I dunno what to tell you at this stage.
Edit: Found this -
"The only acceptable way to update it on LTE phones is to take the SIM out, boot the phone back up, let it sit for 5 or 10 minutes, power off, reinsert SIM, reboot phone. That's the only one I know of, there may be other ways to do it but that is the easiest."
Not sure if it will help, but certainly isn't going to make it any worse. What baseband version do you have installed?
Click to expand...
Click to collapse
I tried this and still no luck. My baseband is I605VRUAND3.
aarongillion63 said:
First thing you need to do is write down your IMEI number. You do NOT want to lose that. Seriously, write it down with a pen. Also your serial number and anything else you find in the EFS partition you might need that's specific to your phone. THEN: at this point it sounds like you'll have to find someone's EFS partition. I've seen it around on XDA multiple times as I've gone through threads similar to this one. Once you find an SCH-i605 efs you'll have to flash/replace/edit yours somehow, try editing your own first to match the same values as your peer's. Don't replace personal information tho. If you end up replacing it you'll have to go in and re-enter your own IMEI number somehow. I am not an expert on how you can do this, but stated here is/would be the process.
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I'll see if I can hunt down an EFS partition that fits my phone. Considering I haven't had any luck yet...I'm not too hopeful in finding one.
jvar105 said:
I tried this and still no luck. My baseband is I605VRUAND3.
Thanks, I'll see if I can hunt down an EFS partition that fits my phone. Considering I haven't had any luck yet...I'm not too hopeful in finding one.
Click to expand...
Click to collapse
Hey guys, I just gave up and traded it in for an S5. I knew a guy so it was a good deal. I appreciate all the help!

[Q] Same IMEI, different Serial Number

Hello people, I will try to simplify and be concise on the problem/doubt I'm having:
Last week I decided to spice things up a little installing a custom ROM (was in 4.2.2, rooted) and gave a 4.3 custom ROM a try.
First flash was successful but didn't get any network. Went back to stock and all was fine (of course I had made previous nandroid and EFS backup). Second flash, during installation in AROMA installer, I ticked an option to update to latest modem. After that, I could only get emergency calls :S, even if I flashed back to stock. IMEI was right, S/N was right (I think), but no signal. It was suggested it could be a modem problem, but I still didn't grasp all the EFS v1/v2 format thing, was growing desperate and didn't want to screw things up more than already did, so, lastly, took the phone to repair service where they used BOX and my phone is all operational now on 4.3 stock build: XXUGMK6.
I want to learn from my "noobness" and am tempted to flash a custom ROM. As you would imagine, I'm still quite traumatized with the past problem and afraid I might screw things up AGAIN.
Now, I've noticed that, while my IMEI is still correct, the S/N is incorrect (not the same as written on the back), yet, my phone is fully functional.
could that cause problem, be it with EFS folder or modem, if I decide to flash a custom ROM again? Aren't IMEI and S/N suppose to coincide with what's written on the back of the phone?
I hope I explained clearly and wasn't boring! My apologies if my english isn't perfect.
Many thanks in advance!
Take it back to repair service, get them to put the right serial number back on it. Also make sure they didn't used the patched kernel and modem, to test flash the latest stock firmware or OTA update, if network is lost you'll know they didn't fix it properly.
Don't flash things you don't fully understand, read all the stickies before to do anything.
boomboomer said:
Take it back to repair service, get them to put the right serial number back on it. Also make sure they didn't used the patched kernel and modem, to test flash the latest stock firmware or OTA update, if network is lost you'll know they didn't fix it properly.
Don't flash things you don't fully understand, read all the stickies before to do anything.
Click to expand...
Click to collapse
Many thanks boomboomer for your reply. Before any flashing happened, I thoroughly read and understood at least an 80% of stickies, read all details about the custom rom and familiriazed myself with all main reference and guides threads. I've flashed custom roms on previous phones I've owned. The loss of network connectivity caught off guard and was looking for a definite solution.
So, I should flash latest stock rom before taking it again to service? what really happens if phone shows different S/N? again, thanks.

Categories

Resources