Im new to site.i m using GALAXY TAB 10.1 P7500..I have stock ICS and rooted.
i tried to install CM 10,It shows error msg while installing.status 7.installation aborted.after that my tablet wont booting.it shows upto samsung Galaxy Tab 750.
I cant able to switch off the tab.if i continuously pressed the power buttons,it is restarting.
now,can i install stock ICS by odin to this tab???
or else there is other method to restore my tab
pls reply
procedure i did.
>transfer the downloaded file to sd card folder
>I entered into recovery mode and wipe data,then wiped cache and format/system folders
>then i clicked install from sd card option
>It shows error status 7-installation aborted.
akardr23 said:
Im new to site.i m using GALAXY TAB 10.1 P7500..I have stock ICS and rooted.
i tried to install CM 10,It shows error msg while installing.status 7.installation aborted.after that my tablet wont booting.it shows upto samsung Galaxy Tab 750.
I cant able to switch off the tab.if i continuously pressed the power buttons,it is restarting.
now,can i install stock ICS by odin to this tab???
or else there is other method to restore my tab
pls reply
procedure i did.
>transfer the downloaded file to sd card folder
>I entered into recovery mode and wipe data,then wiped cache and format/system folders
>then i clicked install from sd card option
>It shows error status 7-installation aborted.
Click to expand...
Click to collapse
What cwm and bootloader do you have installed?? you need the 6.1..... cwm and the ICS bootloader from http://droidbasement.com/db-blog/
And yes you can go back to stock ics by using odin, wipe data/cashe/dalvik and then flash the cwm in odin, the bootloader in odin, kernel isn't needed because it's a build-in kernel and then the ROM
Thanks 4 ur reply sir...i used CWM 5.8. and i didnt installed bootloader.sry i dont know sme technical terms.i updated official ics from samsung .and rooted by odin.
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off
DefQoN_BE said:
What cwm and bootloader do you have installed?? you need the 6.1..... cwm and the ICS bootloader from
And yes you can go back to stock ics by using odin, wipe data/cashe/dalvik and then flash the cwm in odin, the bootloader in odin, kernel isn't needed because it's a build-in kernel and then the ROM
Click to expand...
Click to collapse
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off..
can u tell how i use stock ICS by odin?where i get this?
akardr23 said:
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off..
can u tell how i use stock ICS by odin?where i get this?
Click to expand...
Click to collapse
http://droidbasement.com/galaxy/roms/cm10/p4wifi/
For cwm 6.1, download the recovery.tar and the bootloader4_0_4, flash it on odin on the PDA section, BUT ONLY USE CM10 with THIS!!!! Also download the ROM and also flzdh this under PDA
you can find stock ics firmware on http://www.sammobile.com/firmware/ stock firmware should revert everything, unroot/unbrick
DefQoN_BE said:
For cwm 6.1, download the recovery.tar and the bootloader4_0_4, flash it on odin on the PDA section, BUT ONLY USE CM10 with THIS!!!! Also download the ROM and also flzdh this under PDA
you can find stock ics firmware on stock firmware should revert everything, unroot/unbrick
Click to expand...
Click to collapse
thank you sir.i flashed correctly now.but after reboot the load screen with the Cyanogen Mod 1o boot screen. It will loop the load screen for 20min..whether i should wait or any wrong???
I update my s3 to 4.2 but the human features r not working. Plz suggest what. To do?
Sent from my GT-I9300 using XDA Premium App
akardr23 said:
thank you sir.i flashed correctly now.but after reboot the load screen with the Cyanogen Mod 1o boot screen. It will loop the load screen for 20min..whether i should wait or any wrong???
Click to expand...
Click to collapse
try to wipe data/factory reset and wipe cache after the you flash the CM rom
bearwards said:
try to wipe data/factory reset and wipe cache after the you flash the CM rom
Click to expand...
Click to collapse
thank you so much..it s working...jb s so smooth and quick ,but cant able to make voice call..so restore back to ICS.
I installed cm10 p4 experimental along with bootloader,recovery and modem.If i installed that modem,i cant make voice call in galaxy tab 10.1 3G.
If i followed the procedures in this link http://forum.xda-developers.com/showthread.php?t=1875024 ..they told to install another modem.when i installed that modem,boot loop problem occuring .
what to do???
Whether it is necessary to install modem[given with CM10 rom]?
Related
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
with odin
cm9
stock ics
stock gingerbread
lightening rom
through cwm recovery mode
slim ics
thebyani
resurrection roms
dynamic rom
hydrogen rom
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
speedmod
phenominal extreme
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
if i flash a rom on my phone then binary count is not increasing but when i install a kernel then it increases. why so?
i can format ,mount ,unmount anything on phone but i cant format the user data or do a factory reset while doing that my phone hangs.
i even tried .PIT file with repartition ticked in the odin.
please tell me as if there is any hardware problem or just a normal problem?
now,
my phone says
cant access to /system/csc/SEK/system/'. in recovery
WHAT DOES IT MEAN ???
can any 1 help me?
Hey guys i got my phone working..
The problem was with siyah 3.1rc6.
It was emmc bug..
Motherboard has been replaced under warranty..
I flashed the official gb firmware and older bootloader ,then reseted my binary counts with usb jig...
shubham.dhand said:
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
cm9 ,stock ics ,lightening rom through odin
slim ics , thebyani , resurrection roms through cwm mode
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
Click to expand...
Click to collapse
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
thanks buddy now i'm trying your advice.
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
now i'm doing as you said ,will tell you later that it worked or not..
thanks for your time and your valueable advice
yes my phome is i9100 and i waited for a long time.
Kaze105 said:
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
shubham.dhand said:
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
Click to expand...
Click to collapse
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
i did that.
JJEgan said:
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
Click to expand...
Click to collapse
i did as you said but it is not working.
i still cant format/data or factory reset before or after flashing/installing rom via cwm recovery or odin.
still the problem remains the same.i cant delete the user data or cant do factory reset
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
when i flash gb rom then after flashin there is a installation process in the phone in which it says that cant open data/recovery_log. something like this.
it happens so fast that i couldn't read that.
yeah i gone through these threads.
aHcVolle said:
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Click to expand...
Click to collapse
but should i go for flashing my phone with the .pit file?
Nooooooooooooo wait wait wait,don't ever touch pit files and repatition
i would try it but i hope it won't make your problems worse ...
[edit]
ok then not ...
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
flash with odin a firmware with 3 file.
Inviato dal mio Transformer Prime TF201 con Tapatalk 2
kedai said:
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yup i had siyah 3.1rc6 on my phone.
i tried to restore my nandroid backup but there is no effect on my problem.
how to know weather emmc is fine or currupted?
Try to mount it in CWM and connect it in linux computer and run fsck to check the eMMC. Windows chkdsk is no good.
And please try to remember, did you do this step: flash bad siyah rc6 then wipe/factory reset and get stuck?
if not, then the problem is different from those who flash bad rc6 (which is removed now and siyah is safe)
any thing is not working.
in every thread its written that if my phone goes in download mode and recovery mode then its soft bricked but then how can i unbrick my phone?
or is there any hardware problem?
i can mount and unmount every thing in recovery mode
i can format every thing but only user data cannot be formated,when ever i format/data or factory reset the phone hangs.
is there any other way of hard resetting i9100.?other than cwm recovery?
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Phistachio said:
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Click to expand...
Click to collapse
yup i tried .PIT file too.
tried older bootloader also.but there is no effect on my phone
Dears,
Fisrt of all I'm not an expert, I just try every thing...
I have booted into the boot menu (Up + Menu + Power) and from there I formated the boot, data, datadata, system, and maybe others.
Now the device is only booting and showing "Galaxy S GT-I9000" on the screen and nothing else... I cant even go to the boot menu again.
Please tell me how to install the kernel, the rom
I have downloaded cm-7.2.0-RC3 to my SD card, and I think I need suitable kernel for that... also I need odion with version other that 1.85 coz it is not working.
Please help !
Im not sure if it will work but you might try to install a stock rom via odin 4.43 (it works for I9001)
https://dl.dropbox.com/u/55377774/Odin Multi Downloader v4.43.zip
after you flashed the stock rom search in google how to get into the recovery mode apply the cm update on your sd card install it and whipe data/cash
afterwards you should have cm and everything should be ok
tell me plz how to get stock rom
ahmadk911 said:
tell me plz how to get stock rom
Click to expand...
Click to collapse
Ok
go to http://www.sammobile.com/firmware/
register...
go to the search bar and search for I9000
there you´ll get several firmware suggestions
chose the android version (2.3.3, 2.3.5, 2.3.6) that u prefer and download it
Aditional u can follow these tutorial; you may use this with every firmwareversion u dont have to take the one from the tutorial
http://forum.xda-developers.com/showthread.php?t=1139050
Every time i try to flash a custom rom the rom flases in 5-10 seconds and then phone reboots and gets stuck at samsung galaxy s3 GT-i9300 black LOGO. I can only flash a rom with odin. I have tried touch clockworkmod and simple latest versions and cfroot one also, and i have tried flashing from internal and external sd card...help pls
vladtdr said:
Every time i try to flash a custom rom the rom flases in 5-10 seconds and then phone reboots and gets stuck at samsung galaxy s3 GT-i9300 black LOGO. I can only flash a rom with odin. I have tried touch clockworkmod and simple latest versions and cfroot one also, and i have tried flashing from internal and external sd card...help pls
Click to expand...
Click to collapse
Flash another kernel ( SIYAH) with ODIN , then flash the rom you want to ....
didin't work...did the same thing:crying: i will try to flash an leaked official jb rom in odin as a base and then flash a custom one in cwm
Didn't work...please help
no one knows what to do?srsly? i want to flash custom roms...that is the hole point of android ffs
I would get a stock image from sammobile and flash the phone back to stock and start again.
vladtdr said:
Didn't work...please help
Click to expand...
Click to collapse
Don't panic,follow the steps:
1-Root e recovery with cf-root
2-download rom ( zip.packages) If you see any error messages or the procedure stops, then the packet of cooked rom may be corrupted.
Re-download and re-install from the beginning..
3-If the first boot takes more than 20-30 minutes, manually restart the phone by removing the battery or by pressing and holding for 10 seconds the power button.
If the problem persists, perform a hard reset .
4-If the phone restarts all the time, back in recovery mode and re-install, also performing the hard reset.
5-If your phone will not boot up, go into download mode and try to install a firmware via odin, performing a hard reset.
i tried installing a stock rom then flashing over that i have installed a ics one and jb one...didn't work...the problem is not with the booting itself but with the flashing like i said every rom flashes in like 5 seconds...it tells me it;s done and everything went fine but when i reboot i can't get past the samsung logo before the boot animation, so practically the rom doesn't flash...i dont know why...odin works great....but i can't flash through CWM. I wanted to try TWRP recovery also but i can't seem to find one for the international version of SGS3...Please help:crying:
Flash via recovery requires CF Root ,
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
Odin flash is much longer than 5 seconds and short flash is probably wrong file /faulty file .
jje
i have flashed cf root after flashing stock roms both jb and ics and it didint work...i tried to flash like 7 different roms in ics both based on jellybean and ics...i wiped all everytime...
vladtdr said:
i tried installing a stock rom then flashing over that i have installed a ics one and jb one...didn't work...the problem is not with the booting itself but with the flashing like i said every rom flashes in like 5 seconds...it tells me it;s done and everything went fine but when i reboot i can't get past the samsung logo before the boot animation, so practically the rom doesn't flash...i dont know why...odin works great....but i can't flash through CWM. I wanted to try TWRP recovery also but i can't seem to find one for the international version of SGS3...Please help:crying:
Click to expand...
Click to collapse
I really don't think the ROM caused your recovery to not work correctly. Have you tried a different recovery, likE https://play.google.com/store/apps/...DEsImNvbS5mcmFnZ2VsLnJlY292ZXJ5ZXhlY3V0ZXIiXQ..
devid801 said:
I really don't think the ROM caused your recovery to not work correctly. Have you tried a different recovery, likE https://play.google.com/store/apps/...DEsImNvbS5mcmFnZ2VsLnJlY292ZXJ5ZXhlY3V0ZXIiXQ..
Click to expand...
Click to collapse
i will try this now and report back...and if it's worh mentioning, i had an s2 that did the SAME EXACT thing...i could never sort it out and i sold it...
this app did nothing just rebooted in cwm where it gave me an error...
vladtdr said:
this app did nothing just rebooted in cwm where it gave me an error...
Click to expand...
Click to collapse
WHAT ERROR ? PUBLISH THANKS ....Also any errors from the recovery during the flash you should publish if there are .....
devid801 said:
WHAT ERROR ? PUBLISH THANKS ....Also any errors from the recovery during the flash you should publish if there are .....
Click to expand...
Click to collapse
it says that it can't flash the file and that a log file has been generated...ofc i am freaking out the hole point of android are custom roms and if i can;t install one owning an s3 is pointless...usually it doesent give error i told u guys it finishes like normal only problem is it takes5-10 sec..and then bam, the only error was with the app you sugested
try using a different recovery
slaphead20 said:
try using a different recovery
Click to expand...
Click to collapse
Use a different/older recovery..if you are using touch version use the non-touch version of vice-versa..just flash the recovery tar file in Odin..
make sure phone is gt9300
GR0S said:
make sure phone is gt9300
Click to expand...
Click to collapse
zoot1 said:
Use a different/older recovery..if you are using touch version use the non-touch version of vice-versa..just flash the recovery tar file in Odin..
Click to expand...
Click to collapse
slaphead20 said:
try using a different recovery
Click to expand...
Click to collapse
I did all of that i tried CF-root recovery 6.0.1.2 touch and non-touch recovery and i am sure that my phone is the unlocked international version i9300...
vladtdr said:
it says that it can't flash the file and that a log file has been generated...ofc i am freaking out the hole point of android are custom roms and if i can;t install one owning an s3 is pointless...usually it doesent give error i told u guys it finishes like normal only problem is it takes5-10 sec..and then bam, the only error was with the app you sugested
Click to expand...
Click to collapse
There is some protection with some cwm that allow script only with ROM Manager
as you can see there is no error in the log, so i can't do nothing.
Now try to ADB Push a ROM to your phone.....
hi guys i would appreciate help concerning my gt i9300..new android user n am not a pro yet but am following intructions over here and upgraded my phone from 4.1 to 4.3 via odin[as said in different threads]..works wonderful but later i noticed huge battery drain.i googled for the matter and i came to know that the issue was in the firmware itself..
i then downloaded another 4.3 [updated and latest].
now i cant update to the latest 4.3 iv just downloaded..my present kernel version is dated nov 29 and it remained wen i try flashing it to the latest???
did i skipped somthing??
what should i do??
i read lots of threads n still dnt kno wat to do.
please..........
Your description of what you've done is no help.
Download the latest firmware for your country from Sammobile.com, flash using odin then factory reset.
Follow the guide in general forum, sticky threads.
Sent from my GT-I9300 using Tapatalk
Are you just wanting stock 4.3 for your I9300 or are you wanting a custom rom for the I9300?
If its just stock then yes as @boomboomer says you need to download latest firmware via sammobile or alternative site (there is even a collection on xda i believe) and flash this via odin.
If you want to go the custom rom root however to get the most from your device then all you would need to do is to download the rom of your choice and put on your phone, from there get latest TWRP or CWM recovery (depending on your preference) flash this via odin (in pda), then boot into recovery and flash the rom as per the Dev's instructions
Hope you get your phone to the rom/firmware you want
oki il be short for those who didnt understand..i have installed 4.3 in my i9300..now i want to install another version of the 4.3.i tried but it remained on the previous intalled one even though i tried via odin mates..wat can i do????
Arvind1808 said:
oki il be short for those who didnt understand..i have installed 4.3 in my i9300..now i want to install another version of the 4.3.i tried but it remained on the previous intalled one even though i tried via odin mates..wat can i do????
Click to expand...
Click to collapse
Are u use Cwm? Use custom Rom example u flash Rom 'A'.. First always I do is wipe data /factory reset. Second wipe data cache & last I do wipe dalvik cache.. And then flash the Rom' A'..
Sent from my GT-I9300 using XDA Premium 4 mobile app
Put ur Rom 'A' on sdcard & try use Cwm.. More easily I think
hi was just trying wat u said but smthings wrong i think.i wiped data /factory,cache n dalvik cache..i placed the zip file in my external sd card.i tried to install it from cwm.it said "installing" n few seconds afterwards it said "installation aborted"..n now tht i want to reboot my phone i cant.its keeping on blinking the samsung galaxy s3 logo.is tht normal?
Arvind1808 said:
hi was just trying wat u said but smthings wrong i think.i wiped data /factory,cache n dalvik cache..i placed the zip file in my external sd card.i tried to install it from cwm.it said "installing" n few seconds afterwards it said "installation aborted"..n now tht i want to reboot my phone i cant.its keeping on blinking the samsung galaxy s3 logo.is tht normal?
Click to expand...
Click to collapse
Seems Like uve Followed the instructions correctly but the recovery you are using is outdated OR The .zip Rom file that u have downloaded is corrupted. Try The Following:
1) Enter CWM and flash this recovery, Its the latest Philz Touch Edition of CWM
http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953
As u said Phone isnt booting then u can place the zip file of philz externally in ur external sd and flash from there.
After u flash Philz touch REINSTALL the rom following the same steps as u did earlier or as some of the members suggested u and see what happens.
2) IF 1 Doesnt work den redownload the rom put it in ur SD and Reflash
I'm Sure one of the Above 2 has to work
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
chullan88 said:
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
Click to expand...
Click to collapse
At first flash a Samsung firmware through Odin: http://forum.xda-developers.com/showthread.php?t=1424997
I recommend you not using Rom Manager. Have a look at PhilZ's thread for having a safe kernel and custom recovery to be able to backup and flash what you want.
doubt
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
chullan88 said:
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
Click to expand...
Click to collapse
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Primokorn said:
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Click to expand...
Click to collapse
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
chullan88 said:
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
Click to expand...
Click to collapse
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Primokorn said:
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Click to expand...
Click to collapse
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
chullan88 said:
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
Click to expand...
Click to collapse
Yes you can but the most important thing on N7000 is to have a SAFE kernel before wiping or flashing from recovery. (more details in the N7100 sections)
Here are the general instructions to flash a new custom rom:
1. Having root and a working custom recovery (updated)
2. Boot into recovery mode (VOL DOWN + POWER + HOME) then VOL UP to accept the warning.
3. Make a Nandroid backup and backup your EFS.
4. Full wipe: wipe data (factory reset), cache, dalvik and system. Recoveries are different. You may need to go to another menu to format the system partition.
5. Flash rom
6. Flash Gapps
7. Reboot normally