Hello,
I have a rooted GT P7500.
Also i have got the SetCPU App for overclocking the CPU.
Standard is 1000mhz and iam able to put it up to 1600 mhz.
At the moment i have set it on 1400 mhz.
But is it possible to set it on 1600mhz without destroying
The device??
I dont know whether this is good for the cpu or not... :/
just...
just... some "yes" or "no" answer
should be enough...
could 1600mhz kill the cpu
or not?
It varies from device to device. I've heard of people running 1600 MHz on the tab before, not sure how long they had it at and if any problems appeared though. I've also heard that some people experience problems even at 1400 MHz.
Personally I'm running at 1400 MHz since I never had problems there. Pershoots kernel is also set to max out at 1400 MHz, stating that any higher frequencies could become very unstable.
So yeah, no "yes" or "no" answers to your question, only a "depends on your device".
If you do set it to 1600 MHz though, I'd watch it very closely and go back to 1400 at the first sign of problems.
nightmarebadger said:
It varies from device to device. I've heard of people running 1600 MHz on the tab before, not sure how long they had it at and if any problems appeared though. I've also heard that some people experience problems even at 1400 MHz.
Personally I'm running at 1400 MHz since I never had problems there. Pershoots kernel is also set to max out at 1400 MHz, stating that any higher frequencies could become very unstable.
So yeah, no "yes" or "no" answers to your question, only a "depends on your device".
If you do set it to 1600 MHz though, I'd watch it very closely and go back to 1400 at the first sign of problems.
Click to expand...
Click to collapse
To further this, I have never had any problems running at 1.4 but when setting to 1.5/1.6 it always freezes and needs a hard reboot after about 20seconds. However I've heard people run it at 1.6 all the time with no problems so I suggest a max of 1.4 but if you really want to know, try it at 1.5/1.6 for an hour or two with high usage and make sure set on boot is not ticked. If you feel it's stable then I guess YOUR device can handle it.
You have to remember any OC above 1ghz has the possibility of causing some damage but if you want performance 1.2 is a "safe" OC. 1.4 is riskier bit probably fine but 1.5&6 can pose some risk to the device if mishandled.
Sent from my Desire HD using xda app-developers app
I run mine at 1.5 with no issues, but it varies from device to device.
Sent from my GT-P7510 using xda app-developers app
Yes... I have Overclocked my tab to 1600Mhz... Only problem is faster battery drains...
I am running 1600 and so far no problems.
It froze only once while watching HBO Go but it could be something Wifi related as well.
Still watching watching battery life. I set the lowest speed to 216mhz in order to save some battery.
Above 1400 this tab feels smooth as the Nexus 10, I am running stock ROM with A1 kernel by the way.
yes, it will be useful
Never overclock my tab so much but you have to expect some issues if you overclock too much and too long.
As everybody say, it depend of your device. And of course, on all device you'll experience a faster battery drain. Try not to set the CPU manager to "performance"
Related
I tried asking this in the Megatron-thread but as usual, no answers...
I am a little worried about keeping my phone overclocked at all times, so I was thinking about downloading SetCPU and switching between 600 and 700 via that app. But my question is this: Megatron ROM overclocks the phone by default. If I download a 3rd-party app to overclock/underclock the phone, will this mess up the whole system?
Anyone? Would really appreciate help!
i've been using megatron & setcpu together for the past month.. no issues yet, so cant promise ma phone wont go up in flames i clock extra if needed
Ok, thanks!
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
sarfaraz1989 said:
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
Click to expand...
Click to collapse
How do I disable the OC in Megatron? By adding the "minitron" file and then using SetCPU?
Hi all,
I'm a newbie in Android world. Successfully flashed my O1 to Megatron v1. Afterwhich I tried installing SetCPU to it and overclock to 806mhz & above. However, after overclocking with SetCPU, the whole phone's performance became more sluggish than the original Megatron 729mhz...
Someone please advise me on how to overcome this and make the phone speedier with high frequency.
Is there a way to edit some of Megatron's kernel to make it 806mhz on default even without using SetCPU?
Don't use set on boot feature, it will make ur phone get stock on bootloop...
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
ccdreadcc said:
Don't use set on boot feature, it will make ur phone get stock on bootloop...
Click to expand...
Click to collapse
Got it! Tried last night without set on boot feature. Working fine with 806mhz and speedier than 729mhz. However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card? I'm still using the original 2gb microsd card tt came together with the O1... Will changing to a class 6 or higher microsd card let me clock higher? or my chipset is just lemon at 806mhz?
FnH84 said:
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
Click to expand...
Click to collapse
FnH84: I downloaded SetCPU from XDA forum and can tweak the frequency between 600 & 700 by myself. Even can set profiles to govern the speed at different situations.
taeivon said:
However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card?
Click to expand...
Click to collapse
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
How come Samsung Galaxy Mini running on the same chipset offer 800Mhz as stock???
Man, I don't know! How come the same "Pentium IV" processor could come in speeds from 1.3 GHz to 3.8 GHz?
Can any of you actually believe that LG would underclock an 800 MHz CPU and sell it to us as a 600 MHz instead of letting it run at its best?
Galaxy Mini is obviously using a CPU designed to run at 800 MHz, even though it bears the same name. And that one can probably be overclocked to above 1 GHz.
masteryx said:
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
Click to expand...
Click to collapse
Thanks for your reply. I was thinking bout the same as the other guy, that galaxy ace can run at 800mhz, and why not O1.
Hmm... Isn't there any other ways to push the frequency higher? Maybe supply more voltage to the core? I dont mind sacrificing batt life, I just wanna try ways to push it to the max~~
Hi... I have rooted my Samsung GS2 and payed for the OC app TEGRAK ..
But every time I go over 1400mhz the phone gets very unstable.
It even feezes at 1400 mhz when i use my navigon app...
I have tested it at 1500 mhz.. But reboots in a kind of save mode.,,,
At 1400mhz i runs Quadrant smooth with 4200 in score
And 56 MFLOPS in Linpack
But why is my phone so unstalbe?
But why is my phone so unstalbe?
Click to expand...
Click to collapse
Because it's supposed to run at 1.2Ghz.
If every SGS2 was able to run at 1.4Ghz without any issue I guess Samsung would have set them at 1.4Ghz by default (since battery life is obviously the least of their concerns ^^). When CPUs are produced, there's always variations in quality. what usually happens on x86 CPUs is that they're tested, sorted according to their max stable frequency, and then sold under different names and at different prices. For Exynos my guess is that any CPU that fails to pass the 1.2Ghz bar is just ditched, and they keep the others, some of which will work at 1.4Ghz, whereas some won't.
Now if you want to gain more stability, you can always try to increase the voltage, it usually gets more stable as voltage increases, but it also gets hotter (which can cause it to crash, or may even permanently damage the processor).
BlueScreenJunky said:
Because it's supposed to run at 1.2Ghz.
If every SGS2 was able to run at 1.4Ghz without any issue I guess Samsung would have set them at 1.4Ghz by default (since battery life is obviously the least of their concerns ^^). When CPUs are produced, there's always variations in quality. what usually happens on x86 CPUs is that they're tested, sorted according to their max stable frequency, and then sold under different names and at different prices. For Exynos my guess is that any CPU that fails to pass the 1.2Ghz bar is just ditched, and they keep the others, some of which will work at 1.4Ghz, whereas some won't.
Now if you want to gain more stability, you can always try to increase the voltage, it usually gets more stable as voltage increases, but it also gets hotter (which can cause it to crash, or may even permanently damage the processor).
Click to expand...
Click to collapse
At 1.4ghz the phone will also get hotter and it decreases the lifetime if you run 24/7 at 1.4ghz
Ok.. I know about the x86 cpu's.. But didn't think it was the same in ARM cpu's-
But I see ALOT SGS2 that runs 1800mhz..
I guess that I just have one of the not so OC lilkes...
Overclocking won't always work for everyone at same levels.
I've also seen evidence to suggest that OCing significantly reduces the life of the SGS2. Nobnut had his phone vastly overheating even on stock speeds, and constantly rebooting... He overclocked. A number of others reported similar.
Overclocking is not simple and it is not that you just click on 1400/1500 MHz and you are Overclocked. A lot of things matter here. When we overclock in our Desktops then we have to test it very thoroughly, setting up the right VCore, Bus voltage, Multiplier, checking the stability and temperature etc. etc. Tegrak OC is a nice and simple software to use, but it can't be perfect when you can't set all the settings manually other that just higher the clock rate. Personally I'd always stay with stock speed as incorrect OC could harm my CPU and GPU.
Regards.
If you know anything about overclocking then you'll understand that there are a variety of factors that affect the overclocking of a system. The overclock headroom you get from a processor varies, add to that the variables in component tolerance in the circuit board and you have a huge variety of factors that can limit the maximum frequency that you can overclock your system to.
I'll give you an example using my computers. Click on the images below:
Both processor overclock similarly on using the same components and that was the maximum I could get out of them. Now when I bought an EVGA X58 Classified motherboard and overclocked the Xeon W3520 I got it up to 4704 MHz with less vCore and less CPU VTT. All of this was done with aircooling.
My point is that not all systems will overclock the same even though they share the same model components.
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Of course oc is going to make ur battery life a lot worse.
Sent from my Inspire 4G using xda premium
I haven' used Setcpu in a while but I believe it's got a feature to stress test the settings to see if it can handle it. Generally the worst that happens is it'll crash. So long as it doesn't get hot. Heat=death for electronics :')
I'm using tegrak (from market) to overclock to 1.4. I found 1.5 was too unstable. Noticeable difference between 1.2 & 1.4 is almost none. Also voltage increase of 50mv was needed to gain stability. There is not much point of overclocking the device IMO unless like me u just get some satisfaction out of knowing its running faster!
Sparksltd said:
I'm using tegrak (from market) to overclock to 1.4. I found 1.5 was too unstable. Noticeable difference between 1.2 & 1.4 is almost none. Also voltage increase of 50mv was needed to gain stability. There is not much point of overclocking the device IMO unless like me u just get some satisfaction out of knowing its running faster!
Click to expand...
Click to collapse
This is true. I see no difference between 1.2 & 1.5ghz. But that doesn't keep me from running it at 1.5 when I'm playing a game anyway :'D
Sent from my Inspire 4G using xda premium
GMoneyDTP said:
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Click to expand...
Click to collapse
Well it's not safe, that I can say. Nothing is safe when you don't know what other things are changing with the clock rate. But still you could do that. You just have to make sure that the temperature is within limit, it will be definitely high, but make sure it's not that high.
And upping the clock rate to 1.5 GHz won't drain any extra battery than 1.2 GHz.
Regards.
GMoneyDTP said:
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Click to expand...
Click to collapse
I tried the overclocking and each phone is different, increase then test, there are many benchmarking apps out there, I was stable at 1.4, my kernel does not include 1.5 GHz, and irregardless of what people may say, running the phone at higher clock speeds consistently DOES drain the battery more than 1.2GHz, unless you have found a way to manipulate the laws of physics. I don't see how one can fathom the thought that you can get a faster CPU at absolutely no cost.
Many people think when the CPU running faster means you complete tasks faster, hence 1.5 would complete a task faster than 1.2 and hence save battery, but I believe we use this phone as more than a calculator, so when you are performing a task that causes the CPU to run at 1.5 for a period of time e.g playing a game, browsing or whatever you do with your phone, then the CPU has to draw more power to keep the frequency at 1.5 as compared to the CPU running at 1.2
All in all, I dialed back because I was doing fine without it and I did not need it, other people may need it, and I wasn't gaining anything. to answer your question directly, it all depends on what you do with your phone, I'm not a huge gamer or anything and the 1.2GHz has proven to be more than enough for me to have a very pleasant experience using this device
Using it occasionally is safe, unless you stress your mobile at 1.5+ ghz for more than an hour or so.
The cpu governor will only make use of higher frequencies when there is a need, so mostly you will see your mobile idling at 200 mhz.
HTCinspiration said:
Of course oc is going to make ur battery life a lot worse.
Click to expand...
Click to collapse
Not necessarily a lot worse. It depends on how you are using your phone, and what is causing it to run fast. If overclocking allows the phone to spend longer in deep sleep state, your battery will win. If its games, and by OC you achieve a higher frame rate, then the phone is doing more work, and this will be reflected in the battery life going down.
Most of the time, screen on is going to dominate. If you are a low screen-on user, I guess there is more chance for a higher max_cpu to be beneficial (it won't be used unless there is a task that requires it). More accurately, it helps some of the time, so the net result is not always obvious to predict.
How about undervolting?
Any danger in doing so- other than crashing when voltage is too low?
Before over clocking it might be worth downloading cpuspy from the market and seeing what time you spend in each speed.
Chances are most of the time you won't even hit 1.2 so might not have anything to gain by over clocking.
Then again I dont know how you use your device but I do know I was surprised when I found out.
Sent from my GT-I9100 using XDA App
I've played with the SuperSonic version of this phone (which has a 1.5Ghz core) and the results from photos/video are much better, I'm pretty sure the cameras are exactly the same but the SuperSonic benefits from the higher CPU.
I think it would be cool if somebody could write an app that states
IF user opens Camera application voltage + clock speed is increased to allow stable 1.5GHz speed
WHEN user closes camera application overclock turns off.
Thoughts?
You have a smartphone! Not a pc!
I didnt see any advantage if you oc to 1.5
Btw In normal use your phone keep in 200mhz not 1.2.
I think i only hit 1.2 two or 3 times for 3 seconds in a full battery cycle.
Sent from my GT-I9100 using xda premium
oc dosnt make sense ,there no noticeable diff,an yes very few times i hit 1.2 mostly its on 800 or few times on 1000....using a device with 1.5ghz proccesor an oc a device to 1.5 ghz which has 1ghz processor is very diff in nature....
Fair enough.
Well I wouldn't mind an app that mazes out at 1.2GHz with camera app open, as it can lag when shooting HD.
oc upto 1.4 ghz is fair enough, anything more than that is a waste. though you cant find any visible difference between 1,1.2 and 1.4 it does helps in maintaining smoothness on some situations.
yes very true i had oc my sgs1 at 1.2ghz and sgs2 at 1.4ghz but frankly i dint see the diff so after few days use i turnd to orignal settings....but many use oc an phone works fine,but depends on personel use......an yes as bala_gammer says its fine on 1.4ghz......cheeeerz
is overclocking galaxy s2 to 1.3gh safe
HEY pople and friends i want to overclock my samsung galaxy s2 to 1.3gh soo is it safe ??????.
imad.d said:
HEY pople and friends i want to overclock my samsung galaxy s2 to 1.3gh soo is it safe ??????.
Click to expand...
Click to collapse
hey mate
u really think 100mhz would make that much change? its safe btw... seen people running s2 at clock speed higher than 1.3ghz
Plz help @..Longtime hd gaming(gta sa,nfs mw , asphalt,modern combat...) using 1.4 ghz is safe?
I also noted that gameloft games are makes more over heat for phone..
Which is the best and safe voltage level for 1.4 ghz 1250mv or 1275mv or 1300mv
Iam using siyah v6.0b5 kernel with wizzedkat 3.1..
Sent from my GT-I9100 using XDA Premium 4 mobile app
Well u do not see much difference on daily usage due to oc..but it does give a smoother experience while playing high quality games
Sent from my GT-I9100 using Tapatalk
after root... i have installed SetCpu, i have overclock my processor to 1.6ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Depends on the phone. Mine can't run above 1.4ghz stable (but my GPU can overclock easily).
^What he said. Try it for a while, but if you get reboots or freezes, pull it back to 1.4 or 1.2.
if it runs stable then you can no problem
Watch your temp. Might be a phone but it's the same as a computer. That reno gets to high, and you're looking at overheating and possibly causing corrupted files from shut downs or worse, hardware damage.
Correct me of I'm wrong.
Clay
Sent from my SGH-I777 using XDA
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.6ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
Just make sure you don't check "Set at boot" until you're sure you can set it at 1.6 with out reboots and crashes...... GL
Why 1.6ghz all the time? 1.4ghz uses MUCH less power (meaning less heat as well) and is 99% as smooth.
Colton127 said:
Why 1.6ghz all the time? 1.4ghz uses MUCH less power (meaning less heat as well) and is 99% as smooth.
Click to expand...
Click to collapse
Very good point....
I underclock to 800 . And phone is just as snappy. Why would ya wanna use 1.6 out of curiosity ?
Sent from my SGH-I777 using Tapatalk 2
Honestly the only reason someone would overclock to 1.6 GHz would be for bench marking, which i find useless. My processor is usually clocked to 800 MHz and i can play games like N.O.V.A. 3 with only slight lags here and there.
I do something similar to a few people here. I keep it at 800 most of the time and bump it up to 1000 when I'm playing certain games. Then back to 800 when I'm done. Responsive enough for whatever I have to do and doesn't overheat.
Wow OP
What a question OP.
I can't believe no one called you out yet.. I will be the first
If you want to kill your phone hardware then keep it at 1600! (which is overclocked too you dummie)
USE SetCPU so that your phone can
1. remain cool when high CPU cycles are needed
2. save battery by making profiles especially for when your phone screen is off
...
ok theres good guides out there. just google it
Ok I bought a GT-I9300 and after some months I thought about installing a custom rom.The cynanogen 10.1 rom installed perfectly ran a benchmark test and got 15568 after installing siyah custom kernel i started benchmarking at 1300 mhz,1500mhz and finally 1800 mhz.
The results were quite impressive but i want more the results i got were 18843 but i saw 20218 running at 1600 mhz and the resolution was 716x92 this got me thinking how did he manage that and it was android 4.1.2. By the way im running 4.2.2.
the results don't mean anything
it may be low because apps running background and actually you may get good score on 4.1.2 roms as there are many roms based on 4.1.2, so the developers do so much to improve perfomance.. so try without any app and if you search you may fina an thread which may help you to overclock to an whooping 2ghz
UPDATED
Ok i increased the voltage from 1400 mv to 1475 mv and got 19470 killed some background apps and overclocked my GPU to 700mhz max minimum 440 mhz to get a constant 700mhz i have to set them all at 700 mhz.And by the way a guy got 27312 HOW DID HE GET THAT??!!!
and another guy has 1080x1980 resolution on s3??? how? is there some kind of mod?
Cipi23 said:
Ok i increased the voltage from 1400 mv to 1475 mv and got 19470 killed some background apps and overclocked my GPU to 700mhz max minimum 440 mhz to get a constant 700mhz i have to set them all at 700 mhz.And by the way a guy got 27312 HOW DID HE GET THAT??!!!
and another guy has 1080x1980 resolution on s3??? how? is there some kind of mod?
Click to expand...
Click to collapse
If you search across the web,you may find that there are some cheating cases with these benchmarks..
Cipi23 said:
Ok i increased the voltage from 1400 mv to 1475 mv and got 19470 killed some background apps and overclocked my GPU to 700mhz max minimum 440 mhz to get a constant 700mhz i have to set them all at 700 mhz.And by the way a guy got 27312 HOW DID HE GET THAT??!!!
and another guy has 1080x1980 resolution on s3??? how? is there some kind of mod?
Click to expand...
Click to collapse
Why the obsession with particular scores? My S3, running codecrom 10.6.1 is silky smooth and tbh I have no idea what my benchmark scores are and don't care. Yes there are endless tweaks and settings that can be changed to massage your scores but they wont make your phone any better.
ghostofcain said:
Why the obsession with particular scores? My S3, running codecrom 10.6.1 is silky smooth and tbh I have no idea what my benchmark scores are and don't care. Yes there are endless tweaks and settings that can be changed to massage your scores but they wont make your phone any better.
Click to expand...
Click to collapse
Exactly, I really don't get why people overclock their CPU/GPU to get higher scores. I mean what good does it do? I undervolted and underclocked my CPU to get a better battery-life and the device is still smooth as silk but also gives me better battery-life. It`s never really healthy to overclock your device.
Try to cool down your CPU.
Liquid nitorgen or helium can do the job.
Scarface1991 said:
Exactly, I really don't get why people overclock their CPU/GPU to get higher scores. I mean what good does it do? I undervolted and underclocked my CPU to get a better battery-life and the device is still smooth as silk but also gives me better battery-life. It`s never really healthy to overclock your device.
Click to expand...
Click to collapse
I only use 2 cores on my sgs3 at 1ghz )))) that was a test on how high my phone could go i disable the other 2 cores because they drained battery life.
Cipi23 said:
I only use 2 cores on my sgs3 at 1ghz
Click to expand...
Click to collapse
it's a joke, right?
Glebun said:
it's a joke, right?
Click to expand...
Click to collapse
Yes mate a clue is the title of the thread .
No sane person would be serious with that topic would they ???
jje
"Look, these numbers must mean something!"
No, they don't. This benchmark is pointless. You can get better "using" results on lower numbers than on high ones. For example cpu governor. Pegasusq based on Perseus kernel will try to balance used cores based on system load to improve battery life and performance at the same time. Because of that you can get much less points but overall it'll still perform as good as locking 100% all cores, of course if you'll in fact need such power. What's the freaking point using 100% of CPU for simple 2d game for example if it needs only about 10%?