I bought the phone in U.S.A
about one month ago I was listning to music on the phone when suddenly the phone turned off and did not turn on again...
I tried soft and hard reset but nothing happened... I went to techinal support and they coul'd find out what happened...
Now, I don't know what to do... Can someone please help me???
mottoca said:
I bought the phone in U.S.A
about one month ago I was listning to music on the phone when suddenly the phone turned off and did not turn on again...
I tried soft and hard reset but nothing happened... I went to techinal support and they coul'd find out what happened...
Now, I don't know what to do... Can someone please help me???
Click to expand...
Click to collapse
Hi,
Maybe battery dead? Leave phone connected over USB cable
for an hour, if not power up, try replace a battery.
BR
recover from dead phone
hi.. download new 7.8 or same firmware using navifirm+ 1.7 on your pc, select your firmware base (RM8xx) then chose your country variant, if not listed, just pick one, download latest nokia care suite and launch it, stay on " no connection" option...go to file then select "open product" choose your brand or choose RM817 if your phone is RM801 (if flashing 7.8).. go to programming and select "recovery" then your downloaded firmware will automatically appear on the list..if not, add its at file/setting /browse to the downloaded firmware and add it's.. on recovery list select downloaded firmware and make sure there's update automatically and usb dead phone flashing is checked... then shutdown phone completely and turn on while holding the volume up button and connect it to pc then click start... when the recovery is started, you can release the volume button and wait until its done.. now your phone should be boot and alive..... (if you're flashing 7.8 firmware and your phone is RM801, you have to flash its using RM817 base.. if not, you can't get a recovery option on RM801 base..):laugh:
graphbyte said:
hi.. download new 7.8 or same firmware using navifirm+ 1.7 on your pc, select your firmware base (RM8xx) then chose your country variant, if not listed, just pick one, download latest nokia care suite and launch it, stay on " no connection" option...go to file then select "open product" choose your brand or choose RM817 if your phone is RM801 (if flashing 7.8).. go to programming and select "recovery" then your downloaded firmware will automatically appear on the list..if not, add its at file/setting /browse to the downloaded firmware and add it's.. on recovery list select downloaded firmware and make sure there's update automatically and usb dead phone flashing is checked... then shutdown phone completely and turn on while holding the volume up button and connect it to pc then click start... when the recovery is started, you can release the volume button and wait until its done.. now your phone should be boot and alive..... (if you're flashing 7.8 firmware and your phone is RM801, you have to flash its using RM817 base.. if not, you can't get a recovery option on RM801 base..):laugh:
Click to expand...
Click to collapse
Thanks a lot...helped me alot..
Related
LG P500
I Advancement through
impossible to go back to the V20F V10h
or from 2.3.3 to 2.2.2 with KDZ and I put everything comes to an end, but when I turn on the LG-P500 on the boot and stay in the boot nemoze to convert to the main screen WHY. my English is desperate
make hard-reset:
a) Turn off the phone. If Power Off not working, remove the battery.
b) Press and hold ‘Home’ key and ‘Volume Down’ key.
c) With these 2 keys pressed, press Power button and hold till phone starts to boot in reset mode.
rajko34 said:
LG P500
I Advancement through
impossible to go back to the V20F V10h
or from 2.3.3 to 2.2.2 with KDZ and I put everything comes to an end, but when I turn on the LG-P500 on the boot and stay in the boot nemoze to convert to the main screen WHY. my English is desperate
Click to expand...
Click to collapse
So is Google translate too.
Sent from my LG-P500 using XDA Premium App
whether it will then work through V10h returned in this way
if u have flash sucessfully than switch off ur phn and PRESS 3 BUTTON COMBO ( HOME + VOL DOWN +POWER BUTTON ) and it will boot fine .
if not than raed downgrading ur phn in thread
http://forum.xda-developers.com/showthread.php?t=1038338
it will work same way wth the 1 u want to downgrade if it stuck at android logo
rockvoid said:
make hard-reset:
a) Turn off the phone. If Power Off not working, remove the battery.
b) Press and hold ‘Home’ key and ‘Volume Down’ key.
c) With these 2 keys pressed, press Power button and hold till phone starts to boot in reset mode.
Click to expand...
Click to collapse
Thank you a lot of combinations of 3 booton Home, Volume Down, Power solve the problem thank you very much
I would really like to return to Froyo, but... I don't understand what rajko34 did.
Like, the v10 baseband is available but where I can get a stock froyo rom to flash with the LGMDP.exe?
If I flash with KDZ, the baseband is flashed/downgraded too?
Thanks in advance
rajko34 said:
LG P500
I Advancement through
impossible to go back to the V20F V10h
or from 2.3.3 to 2.2.2 with KDZ and I put everything comes to an end, but when I turn on the LG-P500 on the boot and stay in the boot nemoze to convert to the main screen WHY. my English is desperate
Click to expand...
Click to collapse
Hi,
I am replying to this post just want that other should aware about the facts that Downgrading from 2.3.3 (V20) to 2.2.2 (V10) is possible and is successful using KDZ. You just have to take care of some below Points before flashing:
I AM NOT RESPONSIBLE FOR ANYTHING GOES WRONG TO YOUR DEVICE. TRY ON YOUR OWN RISK
1. Always Use latest driver from LG and make sure that your device is disconnected and any previous version of drivers should be uninstalled from "add and remove programs" using Windows XP SP3 system (Including LGE Virtual Modem,etc. etc. ..!!! (The one who already have latest drivers and clean PC won't find "Virtual Modem" in the device manager, So just Chill ) ..Check device manager and uninstall if they still there and also uninstall drivers from other vendors like Nokia, samsung, etc.
2. After uninstalling drivers , restart your system and make sure that your user is an administrator and then install New LG drivers from the LG official website (Just Google== LG P500 drivers ). and Disable LGE Virtual Modem if still its appearing in the device manager.
3. Always make sure that USB Debugging is enabled on the device and your system supports USB 2.0 (High Speed), so notification like "Hi-Speed device is plugged into Non Hi-speed USB" should not appear.!!
3. Extract KDZ_FW_UPD_EN.zip and Install msxml.msi and reboot your system again.!
4. Again you need administrator.!
5. Now Plugged the Device via USB.!, System will install drivers for your device. Wait let the system completes the driver installation .!
6. Unplugged the USB from the phone and Restart the Phone.
7. Wait for the phone to Boot and load completely (Approx 5 minutes).
8. Set Display Brightness timeout to 30 minutes and ensure USB debugging is ON.
9. Plug the device again and keep it at a place where it will not get disturbed. (Also ensure that You have Good working Data Cable, Hope Your Original one is still alive )
10. Open KDZ_FW_UPD.exe, select type "3GQCT" and phonemode "DIAG"
11. Click browse and select "V10E_00.kdz" file from where you have download it, I have used Indian version because I have Indian LG O1. (I recommend V10E_00.kdz because i used it twice and it works lika a charm :victory: )
12. Now the Flashing Part .! :fingers-crossed: ...!!. Click Launch Software Update.!
13. The phone will goes to Emergency Mode (Don't panic).! and the flashing process will start.. ! wait for flashing to complete.! Ensure that your system will not goes on Standby or sleep.! And If you are using a Laptop I suggest you to plug in the power first.!
14. I always make my mouse moving while flashing process is in progress. It make me feel better . So you can also try this
15. The flashing process may take 5-10 minutes to complete. and you phone will restart itself indicating the offline battery charging screen.!
16. Wait until KDZ prompt "FINISHED" in the end of the log.
17. Unplug the USB and wait for 5 seconds and press and hold Home+VolumeUp+Power simultaneously for Hard resetting the phone .
18. When The screen Shows LG Logo leave the buttons and Hard reset will take half a minute to complete.
19. Wait and Let the device Boots ups completely. (First Boot will take 5 minutes to get you to the lock screen)
20. Done.!! Congratulations.! You are now Downgraded to 2.2.2 . :highfive:
Good Luck :good:
IF anything went wrong during the flashing process or KDZ gave you any error in between the process.! Please DONT pull the battery out from the Phone. Else It will HARD BRICK YOUR PHONE.! And u are not even able to get the phone Power on..I mean Dead! Just Find Support on XDA and try and try again.! (Also suggest you to do not unplug the data cable, it may also lead to HARD brick the phone.)
In this situation ensure that you have a right flashing KDZ file. and IF you have the right one use different "phonemode" like Emergency, Emergency_CS, etc and try and try again.!
IF still wont work try to shake your phone and touch the screen again and again and try to launch the software upgrade
If still device is not responding try lgmdp method and try to flash a recovery and Image.
If nothing works restart you system and then again launch the software update in emergency mode.! (This option works for me once but i recommend you to try it as a last choice)
Don't pull the battery out and ask for support on xda.! Might be someone save your phone's life.
If the phone is still stucked you have to get it to the service centre. (If your phone is in warranty they will replace the PCB free of cost)
Hey,
I decided last night I would try and backup my phone, however Kies thought it would be fun to start updating, and somehow it locked up. Now I get a message on my phone that says :-
Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and try again.
Now I have done what it says however everytime i connect it up i get a message saying "USB Device Not Recognised"
I have downloaded the drivers, with no such luck, and tried installing them via Kies again with no joy. Reading on the forum I found out about the recovery mode which I have manage to get the phone into and downloaded what I thought was the right thing but it's not working at all.
I think what Ideally i need is a way to get the phone back to a working version, I just have no idea how to do it. I have downloaded Odin as that seems to be a program that every page says.
Not sure if you need the information but it was on 3G UK network.
Sorry this probably sounds extremely noob like but I've spent 10 hours on it already and am confused beyond imagination
Kies is one of them horrible programs that just doesnt work properly.
as you have read about Odin, i will assume you know you can use this to flash a stock firmware to your phone.
Have a look for intratechs thread of offical firmwares (linked below), download one for your phone and flash it via odin.
Please read the top information in his thread it tells you what to do and how to do it.
http://forum.xda-developers.com/showthread.php?t=1075278
How do i resolve the other issue of windows not recognizing it ?
put the phone in download mode and pc should recognize the phone
If we're talking about a phone running stock firmware that you've never mucked around with (rooted it, run non-stock firmware on it, etc, etc), send it in to Samsung/whomever you bought it from for warranty service.'
If you start flashing things in order to try & fix it, you run the slight risk you might brick it/void your warranty. Which means you end up paying to get it fixed.
I wouldn't tempt fate if I were in your situation.
If we're talking about a phone you've been mucking around with (like most of us here ), then go to Samfirmware.com & search for the original firmware that came with your phone & flash it following whatever instructions they have for flashing firmware downloaded from their site.
Alternatively, if you're happy with the latest firmware available for your phone model/carrier/country, find/download the PC version of Checkfus (search for it on here/Google). This will allow you to download a tarball of the latest available firmware for your carrier/country, which you can flash according to the instructions here.
Also, before you do anything, try a factory reset if you haven't already.
1.Find your new firmware version and download the file from the links
2.Extract the file, so that you now have a .tar file.
3.Download and run the Odin software from the provided link (200KB)
4.Reboot the phone to download mode
To do this, turn the phone off, then simultaneously press the volume down key, the home button and then press the power button. If you see a warning, press the volume up button to continue.
5.In Odin, click the button named “PDA” and select your .tar file (your rom).
If the rom has several files, also put in the PDA, Phone/Modem and CSC files. but do NOT put in a .pit file.
6.Connect the phone to the computer with usb cable, and wait till ID:COM turns yellow.
7.Click the “Start” button, and Odin will flash your rom.
As simple as that.
I have the files however CANNOT get windows to detect the phone....it simply refuses every single time.
All i get is USB Device Not Recognised
Which i get after holding down, Power, Vol Down and Menu till i get the download screen. Occassionally (VERY RARELY) it has been detected by odin then fails on factory
UKVampire said:
I have the files however CANNOT get windows to detect the phone....it simply refuses every single time.
All i get is USB Device Not Recognised
Which i get after holding down, Power, Vol Down and Menu till i get the download screen. Occassionally (VERY RARELY) it has been detected by odin then fails on factory
Click to expand...
Click to collapse
How to use ODIN
Open odin load firmware
Put phone to download mode and read instructions yes/no
Connect Samsung usb cable .
Start in Odin
A fail during firmware flash is often a faulty download or wrong firmware for the phone .
PC does not see phone usually USB driver problem try another PC Kies must not be running occasionally fxxxd phone .
je
UKVampire said:
I have the files however CANNOT get windows to detect the phone....it simply refuses every single time.
All i get is USB Device Not Recognised
Which i get after holding down, Power, Vol Down and Menu till i get the download screen. Occassionally (VERY RARELY) it has been detected by odin then fails on factory
Click to expand...
Click to collapse
Are you plugged directly into a port on the PC, and not through a keyboard pass-through port, or a USB hub? Or have you tried a different cable?
Ok guys,
I have got it to the point it is able to flash now. Problem is I have some dodgy yellow ! and it wont go any further than that.
How do I get rid of that and get back to bog standard everything, I have used CheckFus and downloaded the firmware but it wont get rid of the !
UKVampire said:
Ok guys,
I have got it to the point it is able to flash now. Problem is I have some dodgy yellow ! and it wont go any further than that.
How do I get rid of that and get back to bog standard everything, I have used CheckFus and downloaded the firmware but it wont get rid of the !
Click to expand...
Click to collapse
Gonna need a little more detail than that. Yellow triangle at boot under where it says "Samsung Galaxy SII"? It's not really clear.
Sent from my GT-I9100 using XDA
Don't worry )
I have fixed it and am back to being on default software with no problems at all
Thanks for all the help on this forum
I have a standard unlocked UK SGS2.
It has been running ICS since its official Samsung update, and for the past week or so has been displaying a "firmware update available" message.
Today I tried to run the update via Kies. The update hung with the SGS2 displaying the "downloading - do not disconnect target" screen. Eventually, Kies displayed a message that the download had failed, and the phone should be disconnected and rebooted.
Rebooting the phone has given the "handset-exclamation mark - PC" screen.
I have so far tried:
a) following Kies instructions to the letter;
b) switching USB ports on the PC (running Win 7 pro 64);
c) trying the "hold volume up&down + on/off buttons; at second flash release power button", etc;
Nothing has worked and the phone appears bricked.
How can I resolve this. It must be a common problem, given the millions of these handsets out there. Unfortunately i am currently overseas and in the middle of a desert - so not able to go to a Samsung service centre to get help!
Download UK unbranded firmware from here <http://www.hotfile.com/dl/153177481/9861a3a/I9100XWLP7_I9100XEULP5_XEU.zip.html>. Extract using Winzip. You will get a Tar.md5 file.
Download Odin from here <http://forum.xda-developers.com/attachment.php?attachmentid=725858&d=1316556218>
Completely shutdown Kies via the Task Manager.
Completely Shut Down Phone. Now hold volume down+home+power buttons, You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode
Connect your phone to your pc via cable. Fire up Odin. The box below ID:COM will be yellow.
Click on PDA and select the .tar.md5 file extracted in first step.
Click Start. Let Finish. Do not disconnect wire until you see 'Pass'.
If phone bootloops, shut down phone. Now hold volume Up+Home+Power buttons. Do a Factory Reset. Restart.
Let know if this works.
Go to samsung and tell them what happened and they should fix it under warranty
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
I knew the kies is not the proper way to update the latest firmware and always giving a problem! When the downloading firmware on kies are almost finish there is always an error such as " hang" or " internet disconnected " ! The smarter way is to use odin3 :good:
Its not a major issue, this isnt a brick, its a softbrick, big difference, just means ya flash failed, could be a million reasons for that,
AS DESCRIBED above, this is a simple fix by downloading and flashing the appropriate stock firmware for your phone via odin again in download mode.
your phone will go to download mode so dont worry about that, if it hasnt gone to dl mode when attempted, pull the battery, leave it out 10 mins, put it back in and try again, failing that a usb jig will suffice, see post on who and where will share their jig if you dont have one, there may be someone near you.
CAUTION, dont try flashing any of the latest leaks on your phone, just choose whatever the last stock release was by your carrier on samfirmware, and flash that as that will be your latest firmware.
I never use kies to update, simply use ota, or download the rom and flash it, kies is very unreliable, this is where HTC and SE beat samsung, the download and recovery methods are so much simpler and they work.
HEy guys after rooting my phone and booting it up it worked fine. After a couple days i decided to flash a custom rom to it. All went well and after flashing is said to reboot. After it shut down there was nothing. I cant boot to recovery or even to the LG logo. After holding down the power and volume down button for 20 seconds the red led will blink for 8 seconds...then 8 seconds more and it will do that for ever. Plugging it into my computer the computer will open up like 15 partitions. saying i need to format before i can use it. Now i did back up the phone before flashing and i have the file on my computer. How can I fix this?
themightyandroid said:
HEy guys after rooting my phone and booting it up it worked fine. After a couple days i decided to flash a custom rom to it. All went well and after flashing is said to reboot. After it shut down there was nothing. I cant boot to recovery or even to the LG logo. After holding down the power and volume down button for 20 seconds the red led will blink for 8 seconds...then 8 seconds more and it will do that for ever. Plugging it into my computer the computer will open up like 15 partitions. saying i need to format before i can use it. Now i did back up the phone before flashing and i have the file on my computer. How can I fix this?
Click to expand...
Click to collapse
Try to enter download mode. If your computer can detect the phone, then you can try to flash it manually.
Download LG G2 Stock Firmware. You can google it because I still cannot include link on my post.
How to enter download mode:
Turn off the phone. In your case you can pull your battery out, wait for 5 seconds, and then reinsert the battery.
Press volume up while connecting the USB cable connected to the computer.
Install LG G2 driver. (See attachment)
Flash it using flash tool. (See attachment)
How to flash manually:
Run the UpTestEX.exe.
Change Select Type into "3GQCT".
Change PhoneMode into “DIAG”.
Select kdz file (Stock Firmware that you want to flash)
Click on the “NORMAL WEB UPGRADE TEST” button.
Click on the “Upgrade Start” button.
On “Select Country & Language” choose Republic of Korea, select English as default language and proceed.
Wait for the flashing process, in the end your phone will reboot automatically.
Unplug your phone when you are done.
Cinus1985 said:
Try to enter download mode. If your computer can detect the phone, then you can try to flash it manually.
Download LG G2 Stock Firmware. You can google it because I still cannot include link on my post.
How to enter download mode:
Turn off the phone. In your case you can pull your battery out, wait for 5 seconds, and then reinsert the battery.
Press volume up while connecting the USB cable connected to the computer.
Install LG G2 driver. (See attachment)
Flash it using flash tool. (See attachment)
How to flash manually:
Run the UpTestEX.exe.
Change Select Type into "3GQCT".
Change PhoneMode into “DIAG”.
Select kdz file (Stock Firmware that you want to flash)
Click on the “NORMAL WEB UPGRADE TEST” button.
Click on the “Upgrade Start” button.
On “Select Country & Language” choose Republic of Korea, select English as default language and proceed.
Wait for the flashing process, in the end your phone will reboot automatically.
Unplug your phone when you are done.
Click to expand...
Click to collapse
Thanksman However there is a problem i seem unable to get to download mode. My screen dosent show anything no LG symbol or anything. Only the backlight of the phone lights up. Any other methods of getting to download mode? Theccomputer says the drivers arent installed but they are. The computer recognizes it as QHSUSB_BULK. I am downloading the 2.1GB kdz file right now for it.
themightyandroid said:
Thanksman However there is a problem i seem unable to get to download mode. My screen dosent show anything no LG symbol or anything. Only the backlight of the phone lights up. Any other methods of getting to download mode? Theccomputer says the drivers arent installed but they are. The computer recognizes it as QHSUSB_BULK. I am downloading the 2.1GB kdz file right now for it.
Click to expand...
Click to collapse
Check this thread:
http://forum.xda-developers.com/showthread.php?t=2582142
Last night, i accidentally swiped to restore to an older ROM that i had. Not meaning to do this, and beginning to panic, i attempted to stop it, while it was still at 0%. I did this by holding the red button down. As i have now realised how stupid that was, i am wondering if there is any chance to fix it. It is now stuck on the Sony logo. Although i have seen many problems here, i cant find anyone that had the same problem as me. I was running the existenz ROM, and the ROM i was accidentally restoring to was the official ROM. Please help me
Thank you
thetechant said:
Last night, i accidentally swiped to restore to an older ROM that i had. Not meaning to do this, and beginning to panic, i attempted to stop it, while it was still at 0%. I did this by holding the red button down. As i have now realised how stupid that was, i am wondering if there is any chance to fix it. It is now stuck on the Sony logo. Although i have seen many problems here, i cant find anyone that had the same problem as me. I was running the existenz ROM, and the ROM i was accidentally restoring to was the official ROM. Please help me
Thank you
Click to expand...
Click to collapse
Does the phone go into flash mode?
sam_conrad said:
Does the phone go into flash mode?
Click to expand...
Click to collapse
yes, i can access it by holding the up button and power button while insterting the USB cord into the phone
thetechant said:
yes, i can access it by holding the up button and power button while insterting the USB cord into the phone
Click to expand...
Click to collapse
Enter flash mode and flash the stock firmware
thetechant said:
Last night, i accidentally swiped to restore to an older ROM that i had. Not meaning to do this, and beginning to panic, i attempted to stop it, while it was still at 0%. I did this by holding the red button down. As i have now realised how stupid that was, i am wondering if there is any chance to fix it. It is now stuck on the Sony logo. Although i have seen many problems here, i cant find anyone that had the same problem as me. I was running the existenz ROM, and the ROM i was accidentally restoring to was the official ROM. Please help me
Thank you
Click to expand...
Click to collapse
I had the exact same problem, I created a guide to help other people with this problem. Here it is. I can't post links yet but if you want to have a look, search for this on google ( oneplus : Xperia z2 bricked help!! ) It's the first link ( fourms Oneplus Net )
---------------------------------------------------------------------------------------------------------------------------------------
To get Sony's UI/ROM back:
Download and Install Flashtool from here.
Download a proper ( official ) ftf firmware for YOUR phone ( eg Sirius ).
Now copy the downloaded ftf firmware file to ( C:\Flashtool\firmwares )
Open the Flashtool and click on the little lightning rod and choose Flashmode.
Now a window will pop up and ask you to choose firmware for your device, Choose the one you downloaded and click flash.
--------Choosing a wrong one WILL further brick your device--------
Meanwhile, turn your phone completely off, To do this hold the Power button and the volume UP button until you feel your phone vibrate 3 times.
Flashtool will pop up saying you need to put your phone into flash/fastboot mode.
Now put it on fastboot/flash mode ( connect the usb to your computer and hold down the volume up button while plugging the other end to your phone. Your phone's LED should be blue at this stage.
The flashing process will start and once it's done, Flashtool will ask you to unplug the device and restart the phone.
The first boot takes 5-10 minutes.. CONGRATS YOU HAVE UN-BRICKED YOUR PHONE.
Now if you want to root your phone and install a custom recovery ( TWRP ), Download this package and extract it on your desktop
Make sure you have usb debugging turned on ( on your phone )
Navigate inside " to root" folder and run install.bat
Once thats done, to install recovery, navigate inside the " recovery folder " and run install.bat
Make sure to follow on-screen instructions. ( your computer and your phone )
Now you have Rooted sony ROM.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
ArrowHunt3R said:
I had the exact same problem, I created a guide to help other people with this problem. Here it is. I can't post links yet but if you want to have a look, search for this on google ( oneplus : Xperia z2 bricked help!! ) It's the first link ( fourms Oneplus Net )
---------------------------------------------------------------------------------------------------------------------------------------
To get Sony's UI/ROM back:
Download and Install Flashtool from here.
Download a proper ( official ) ftf firmware for YOUR phone ( eg Sirius ).
Now copy the downloaded ftf firmware file to ( C:\Flashtool\firmwares )
Open the Flashtool and click on the little lightning rod and choose Flashmode.
Now a window will pop up and ask you to choose firmware for your device, Choose the one you downloaded and click flash.
--------Choosing a wrong one WILL further brick your device--------
Meanwhile, turn your phone completely off, To do this hold the Power button and the volume UP button until you feel your phone vibrate 3 times.
Flashtool will pop up saying you need to put your phone into flash/fastboot mode.
Now put it on fastboot/flash mode ( connect the usb to your computer and hold down the volume up button while plugging the other end to your phone. Your phone's LED should be blue at this stage.
The flashing process will start and once it's done, Flashtool will ask you to unplug the device and restart the phone.
The first boot takes 5-10 minutes.. CONGRATS YOU HAVE UN-BRICKED YOUR PHONE.
Now if you want to root your phone and install a custom recovery ( TWRP ), Download this package and extract it on your desktop
Make sure you have usb debugging turned on ( on your phone )
Navigate inside " to root" folder and run install.bat
Once thats done, to install recovery, navigate inside the " recovery folder " and run install.bat
Make sure to follow on-screen instructions. ( your computer and your phone )
Now you have Rooted sony ROM.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Thank you so much, as i have a mac, instructions had to be changed a little, but i was able to revert to a proper ROM again, and now have a fully functioning phone again. Thank you so much again.
thetechant said:
Thank you so much, as i have a mac, instructions had to be changed a little, but i was able to revert to a proper ROM again, and now have a fully functioning phone again. Thank you so much again.
Click to expand...
Click to collapse
No problem Always here to help.. if i can
Currently, I'm making a toolkit for all xperia z devices, just hoping it goes according to plan