Hello
After trying to install a rom (which did not go to the end by the way), I have the robot on the back with a red triangle with below message:
" MANUAL MODE" Applying multi-CSC...
Applied the CSC-code: BOG
Successfully applied multi-csc.
Can someone help mùe to fix that?
I have tryied to install CF-Root-SGS3-v6.4 with ODIN but doesn't work neither
Many thanks in advance for yr help
Related
I have Samsung Galaxy S Advance I9070. I do not know how to recover it. I can go to Recovery and to Download mode. Can browse internal storage from Recovery too. But phone do not boot at all. I could install ROM via TWRP, and still no luck. Than I tried 3 firmware via Odin (for my phone ofcourse). And still noting. Recovery stucks at this after Odin instalation restart. And it says:
Code:
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/VOD/system'.
Successfully applied multi-CSC.
And I do not see Samsung Logo at powering phone. Screen is like broken TV (without signal) just when that logo should be seen.
Could JTAG fix this somehow? Maybe I lost bootloader. (I am not too familiar with that).
And last, maybe thing that I should write at the begining: That happend after I tried to restore ROM in TWRP. TWRP restarts at half of process of some compressed backup. But it restored backup that was not compressed. After that I booted normaly into system. But after one reboot later screen become strange at the point where Samsung logo shoud be (just after powering on). And it went to boot loop to recovery from that point. As I said, I tried with flashing stock fw via Odin, installing TWRP - installing custom ROM. All that went well, but no boot.
Could it be some hardware issue, or TWRP messed up something about boot? And I9070 have locked bootloader if that help on answering me somehow.
Hello,
I installed Xposed Framework (app_process version 58 and XposedBridge.jar version 54), and now each time I switch on my phone, it shows on the top "set warranty bit recovery" then an animation of an android dying with a red "!" triangle,
then it is written
"Android system recovery <3e>
KTU84P.G530HXXU1ANII
[...]
Reboot system now
Apply update from ADB
[...]
(at the bottom
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : XEF
Successfully applied multi-CSC.
"
If I click on "reboot system now", the system reboot without any problems and is totally working.
If I uninstall the Xposed famework, everything goes fine, so this is not a big issue, but it is quite embarrassing to have to do that manipulation each time I switch on my phone, and each time I am scared that it will never boot ...
Is it possible to make it boot normally yet without removing Xposed (I really like that app) ? If not, I will remove it but well ...
I rooted my phone using the tutorial phonehorn.com/2014/11/root-samsung-galaxy-grand-prime and all worked well except that I did not have "pass" but "reset" on Odin yet everything worked well and my phone was successfully rooted.
My installation mode in Xposed is classical (install directly in /system).
I didn't change anything else to the system which is Android 4.4.4.
Thank you
Knox
I forgot to say that SuperSu have disabled Knox, I don't know if this is helpful or useful ...
Hello from cuba.
i have a sch-i535 de verizon. trying to install a new recovery in order to flash a custom room. My phone have a problem somewhere in the motherboard and IS NOT recognized for the computer so i CAN´T use odin. I download 2 apps rash and twrp manage to installa a custom recovery, i download the files for my phone sch-i535 d2vzw the most advanced version and flash it. whe reboot i got this message "system software not authorized by verizon wireless has been found on your phone. prease turn off your phone and go to the nearest verizon wireless store for help."
I survive entering in download mode (power+home+ volume -) and when ask me to continue y set restart phone and the problem was solve. i was able to enter in my phone but never again in my recovery mode....
so i open rash app and try to restore a backup i did before all this shost in case and when reboot pass the samsung logo and get a green android with a red triangle and message NO COMMAND. them appear
android system recovery <3e>
KOT49H.I535VRUDNE1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
(bad android logo)
#manual mode#
-- Appling Multi-CSC...
applied the CSC-code : VZW
Successfully applied multi-CSC.
look like my old recovery but nothing function
i press reboot and say error and reboot the same screen
the same with hard reset say error and reenter
now i don't know what to do... remember i CAN'T use a pc
WHAT CAN I DO??????? Help please!!
update!!!!!
Yesterday i after many hours of frustration i install odin 3.10.7 and recognize mi device on download mode... so i think i have hope.
waiting for some idea,
what happend to my phone? is bootlock? soft brick?
I need a definition to know how to proceed.
Thanks everyone
Hi.
I am new on this forum and I don't know if I posted this question right, so sorry for this.
I have this Samsung Galaxy Fame GT-S6810P of my brother's and he got it to charge and after he turned it on, the phone started to bootloop.
I first tried to get into recovery mode and it doesn't work, so I tried to flash the firmware, but this didn't work too.
When I get into recovery, I can't acces that menu with "wipe data" option. It shows me only:
-- init-recovery...
Done init-recovery
# MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : VNN
Succesfully applied multi-csc
And it shows the android dead picture with the red triangle.
ht tp:// imgur. com/i8j Ll7j
What anything else I could try?
Thanks for your time!
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
zolog said:
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
Click to expand...
Click to collapse
Hello. As far as I know, if you do not have OEM Unlocking enabled, you cannot flash anything through ODIN.
However, you should be able to flash stuff in the green screen you are in.
Download the *proper* stock firmware from sammobile.
By proper, I mean, if your tab has no sim then download for T820
and if it does Download for T825. Then download with the proper CSC code. (it is basically the region you bought the tab from. Look it up).
Download and flash with ODIN 3.14. You can flash stock roms from the Error screen you're in. Also be sure that you're flashing everything properly and have the proper drivers by following everything here: https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
press the thanks button on the bottom right of my post if i helped. Means a lot