Hi.
I am new on this forum and I don't know if I posted this question right, so sorry for this.
I have this Samsung Galaxy Fame GT-S6810P of my brother's and he got it to charge and after he turned it on, the phone started to bootloop.
I first tried to get into recovery mode and it doesn't work, so I tried to flash the firmware, but this didn't work too.
When I get into recovery, I can't acces that menu with "wipe data" option. It shows me only:
-- init-recovery...
Done init-recovery
# MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : VNN
Succesfully applied multi-csc
And it shows the android dead picture with the red triangle.
ht tp:// imgur. com/i8j Ll7j
What anything else I could try?
Thanks for your time!
Related
tl;dr What files do I use in Odin to return to stock from a phone that boot loops? (i have no idea what software was on there before it started)
The phone came from Canada (Bell). Previous owner tried to unlock it for use in the US. Phone worked for a few days then turned off & wouldn't get past boot (it would show animation & sound then go into a black screen with menu/back key lit up). It was also missing volume up/down keys. Phone was given to me as I was moving back to Canada. Now here I am in Canada...
I've ordered & replaced the volume keys, got into download mode, and using Odin I've flashed "I9000XXJVU_I9000OXAJVU_OXA". I've no idea what software version was on the phone at the time. I used pit 512. The phone reboots and...
Code:
-- Copying media files...
[COLOR="Red"]E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI men
u for format and reboot actions.[/COLOR]
Meida files copy failed.
-- Wiping data...
Formatting /data...
Formatting /dbdata...
Formatting /cache...
Deleting Meta Data
[COLOR="Red"]Data wipe failed.[/COLOR]
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'KOR'
Successfully applied multi-CSC
The failed actions are due to me not having an SD card correct? And at the bottom there it says it applied the CSC-code 'KOR' for Korea? I'm in Canada.
Now the phone goes into a loop, flashing the "Galaxy S GT-I9000 Samsung" logo on and off for ever (no animation or sound this time). I also tried flashing the latest from sammobile (under GT-I9000M). It's a single file and that put me in a boot loop as well.
Any advice greatly appreciated!!!
You will have far better luck going to the I-9000 forums to get answers. While similar, they are different from the T959 Vibrant.
Hello
After trying to install a rom (which did not go to the end by the way), I have the robot on the back with a red triangle with below message:
" MANUAL MODE" Applying multi-CSC...
Applied the CSC-code: BOG
Successfully applied multi-csc.
Can someone help mùe to fix that?
I have tryied to install CF-Root-SGS3-v6.4 with ODIN but doesn't work neither
Many thanks in advance for yr help
I have Samsung Galaxy S Advance I9070. I do not know how to recover it. I can go to Recovery and to Download mode. Can browse internal storage from Recovery too. But phone do not boot at all. I could install ROM via TWRP, and still no luck. Than I tried 3 firmware via Odin (for my phone ofcourse). And still noting. Recovery stucks at this after Odin instalation restart. And it says:
Code:
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/VOD/system'.
Successfully applied multi-CSC.
And I do not see Samsung Logo at powering phone. Screen is like broken TV (without signal) just when that logo should be seen.
Could JTAG fix this somehow? Maybe I lost bootloader. (I am not too familiar with that).
And last, maybe thing that I should write at the begining: That happend after I tried to restore ROM in TWRP. TWRP restarts at half of process of some compressed backup. But it restored backup that was not compressed. After that I booted normaly into system. But after one reboot later screen become strange at the point where Samsung logo shoud be (just after powering on). And it went to boot loop to recovery from that point. As I said, I tried with flashing stock fw via Odin, installing TWRP - installing custom ROM. All that went well, but no boot.
Could it be some hardware issue, or TWRP messed up something about boot? And I9070 have locked bootloader if that help on answering me somehow.
Hello,
I installed Xposed Framework (app_process version 58 and XposedBridge.jar version 54), and now each time I switch on my phone, it shows on the top "set warranty bit recovery" then an animation of an android dying with a red "!" triangle,
then it is written
"Android system recovery <3e>
KTU84P.G530HXXU1ANII
[...]
Reboot system now
Apply update from ADB
[...]
(at the bottom
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : XEF
Successfully applied multi-CSC.
"
If I click on "reboot system now", the system reboot without any problems and is totally working.
If I uninstall the Xposed famework, everything goes fine, so this is not a big issue, but it is quite embarrassing to have to do that manipulation each time I switch on my phone, and each time I am scared that it will never boot ...
Is it possible to make it boot normally yet without removing Xposed (I really like that app) ? If not, I will remove it but well ...
I rooted my phone using the tutorial phonehorn.com/2014/11/root-samsung-galaxy-grand-prime and all worked well except that I did not have "pass" but "reset" on Odin yet everything worked well and my phone was successfully rooted.
My installation mode in Xposed is classical (install directly in /system).
I didn't change anything else to the system which is Android 4.4.4.
Thank you
Knox
I forgot to say that SuperSu have disabled Knox, I don't know if this is helpful or useful ...
Hello from cuba.
i have a sch-i535 de verizon. trying to install a new recovery in order to flash a custom room. My phone have a problem somewhere in the motherboard and IS NOT recognized for the computer so i CAN´T use odin. I download 2 apps rash and twrp manage to installa a custom recovery, i download the files for my phone sch-i535 d2vzw the most advanced version and flash it. whe reboot i got this message "system software not authorized by verizon wireless has been found on your phone. prease turn off your phone and go to the nearest verizon wireless store for help."
I survive entering in download mode (power+home+ volume -) and when ask me to continue y set restart phone and the problem was solve. i was able to enter in my phone but never again in my recovery mode....
so i open rash app and try to restore a backup i did before all this shost in case and when reboot pass the samsung logo and get a green android with a red triangle and message NO COMMAND. them appear
android system recovery <3e>
KOT49H.I535VRUDNE1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
(bad android logo)
#manual mode#
-- Appling Multi-CSC...
applied the CSC-code : VZW
Successfully applied multi-CSC.
look like my old recovery but nothing function
i press reboot and say error and reboot the same screen
the same with hard reset say error and reenter
now i don't know what to do... remember i CAN'T use a pc
WHAT CAN I DO??????? Help please!!
update!!!!!
Yesterday i after many hours of frustration i install odin 3.10.7 and recognize mi device on download mode... so i think i have hope.
waiting for some idea,
what happend to my phone? is bootlock? soft brick?
I need a definition to know how to proceed.
Thanks everyone