Has anybody been able to get this to work on their phone? I'm wondering if it might just be my phone. Whenever I try to start it, it just goes to a black screen or a tweeked out screen and becomes unresponsive. A friend of mine can run it on his GS2, so my Note should have no problem running it. I am running Black Star X. Any help is appreciated. Thanks.
EDIT: I had to disable the GPU Force Rendering in Development Options in order to get it to work.
Related
Hello all.
Not much of a poster but i would like to see if i can get some help with my phone.
I've had it rooted and running Trigger for a couple months now......but recently i came into a problem. The phone will go into landscape mode on its own and sticks there.
It wont rotate back no matter what i do.
Yes i've tried toggling the auto-rotate settings but it still wont rotate back.
The only way i can get it to go back to vertical is by reflashing the rom, but it doesn't take long before it goes back. I've also tried flashing other roms but same problem.
It's really starting to get frustrating and i don't know what to do. Any thoughts?
Have you tried re-calibrating? Go to Settings>Display>Horizontal Calibration and let it do its thing. I ran into this with trigger and later, project v.
You mean anytime in landscape mode it locks that way? Like when using the camera or watching a movie? Or it only locks when using landscape on the home screens?
that sounds like a hardware problem to me but maybe if i knew more about what your doing i could say otherwise. there are sensors inside your phone that tell it when it is sideways, upside down, rightside up. not that i encourage this but...... have you tried bumping it off of a table to see if it flips back? maybe the sensors are acting up???
Has anyone managed to solve the corruption issue on the CRT screen off animation? The annoying thing is that it is pretty much a toss of a coin as to whether it will do it or not -- sometimes mine works fine and other times it's corrupted.
I'm running VillainRom 1.1 and I have the latest version of Chainfire3D installed.
I find when I play the game X Construction I get the glitchy CRT screen out problem. a reboot is needed to go back to normal. X Construction also FC if I try to play it again after awhile of inactivity.
Hi all
I've done something stupid to my phone.
Been fiddling with auto-brightness settings, and now the screen won't switch on.
Got CyanogenMod 7.1 stable for the HTC Desire HD, had it loaded for close to a month(been enjoying it).
I've rebooted, pulled battery, SD card, SIM, everything. On boot the display shows the HTC logo, and the CyanogenMod BootScreen, immediately after that, I see the screen off animation, where it would normally go to homescreen. I know the phone is still on, the notification light is flashing, and via USB I can get screenshots of my lockscreen(widgetlocker).
When I click the power button a few times, intervals of ~3 seconds, the screen flashes just quick enough to see my lockscreen, but it really is a split second flash.
I've got Juice Defender Beta, I think the latest, used it for a couple weeks. Today I wanted to test the auto brightness settings it "supports"(beta feature). I noticed no changes, so I skipped over to the custom display settings for cyanogenmod, under Settings/Cyanogen .../display/Auto Brightness.
I fiddled there, as I've so done before, couldn't find the right balance , so I left my phone for a bit, it clicked the screen off, now screen is 'stuck' off.
I understand that this may be Juice Defender's doing, but since I was fiddling with cyanogen settings too, I'm posting here and to JD support, just in case. There might be a conflict.
Anyone know how I would debug this through ADB? I would really like to disable auto-brightness, that would probably eliminate Cyanogen from causing this (as the settings I changed related to Auto-Bright).
I tried this, no luck.
Otherwise, how to reset Juice Defender settings via ADB, or through a USB screenview... thing?
I've got a NANDroid backup, but its a little dusty, I've done a lot of customisation and such since, I'd prefer to avoid using it.
This is, of course, urgent. I can't use my phone at all, so any help is greatly appreciated.
EDIT: Solved it. Booted into safe mode, disabled what I changed, sorted. Still no idea what caused it, but ja, I fixed it. Android has a safe mode? Good to know...
Hi i have a problem with my S3 where, say i was typing a text out or on an app. The screen goes into landscape for a split second then goes black and then back to normal. This happened on my first S3 then i went and got it replaced and it does the same again.
I haven't a clue why its doing this i have auto rotate turned off and it still does this. Has anyone else came across this issue?
Im running 3.7 Wanamlite Rom with Siyah 1.6.8 kernel.
i tried moving to checkrom v5.5 HD and the problem happens on that too. I cant see it being another faulty phone seeing as only a week ago I went and got it replaced with another brand new RED S3.
I hope this is an easy fix cause really does get on your nerves when screen does this and i know its not normal or could it be just an issue with JB? thanks in advanced.
downdog3702 said:
Hi i have a problem with my S3 where, say i was typing a text out or on an app. The screen goes into landscape for a split second then goes black and then back to normal. This happened on my first S3 then i went and got it replaced and it does the same again.
I haven't a clue why its doing this i have auto rotate turned off and it still does this. Has anyone else came across this issue?
Im running 3.7 Wanamlite Rom with Siyah 1.6.8 kernel.
i tried moving to checkrom v5.5 HD and the problem happens on that too. I cant see it being another faulty phone seeing as only a week ago I went and got it replaced with another brand new RED S3.
I hope this is an easy fix cause really does get on your nerves when screen does this and i know its not normal or could it be just an issue with JB? thanks in advanced.
Click to expand...
Click to collapse
no1 know what could be causing this problem. even with auto rotate and motion TURNED OFF the screen still goes to the side view and then blanks out for a second then back to normal
downdog3702 said:
no1 know what could be causing this problem. even with auto rotate and motion TURNED OFF the screen still goes to the side view and then blanks out for a second then back to normal
Click to expand...
Click to collapse
3rd galaxy s3 and still having this issue. Its the red model. It was working ok then out of the blue the phone would act as if its opening a landscape app and then reverts back to normal. this is really annoying as sometimes wen unlocking the phone it rotates to landscape and i have to lock and re unlock to get it back to normal. This happens even with auto rotate turned off and motion disabled.
is there a way to test and see if its a certain app thats causing this? cause no way 3rd brand new galaxy s3 and having the same issue. Thanks
Hello!
I recently changed a cracked display on my l7777.
When I turn on the phone everything works just fine, including all tests using *#0*#.
But if I lock the screen or it locks itself after some time, the screen is upside down, really bright, and the touch inputs are reversed, for example to pull down the top bar, you have to drag from the bottom. Also sometimes crashes the *#0*# test or it shows failed.
Im not sure what is causing this, I tried apps that force the screen to certain rotation, but they barely work and the touch inputs are still reversed.
Sadly I only have access to limited technical support (I live in Bolivia) but I was wondering if there is any way to fix this, if the phone works perfectly on start up, maybe someone knows how to remain like this, what happens when the screen is locked?
Thank tou very much in advance for any help
palalisimo said:
Hello!
I recently changed a cracked display on my l7777.
When I turn on the phone everything works just fine, including all tests using *#0*#.
But if I lock the screen or it locks itself after some time, the screen is upside down, really bright, and the touch inputs are reversed, for example to pull down the top bar, you have to drag from the bottom. Also sometimes crashes the *#0*# test or it shows failed.
Im not sure what is causing this, I tried apps that force the screen to certain rotation, but they barely work and the touch inputs are still reversed.
Sadly I only have access to limited technical support (I live in Bolivia) but I was wondering if there is any way to fix this, if the phone works perfectly on start up, maybe someone knows how to remain like this, what happens when the screen is locked?
Thank tou very much in advance for any help
Click to expand...
Click to collapse
Sounds like the digitizer was inverted somehow when the screen was replaced.
Sent from the i777
palalisimo said:
Hello!
I recently changed a cracked display on my l7777.
When I turn on the phone everything works just fine, including all tests using *#0*#.
But if I lock the screen or it locks itself after some time, the screen is upside down, really bright, and the touch inputs are reversed, for example to pull down the top bar, you have to drag from the bottom. Also sometimes crashes the *#0*# test or it shows failed.
Im not sure what is causing this, I tried apps that force the screen to certain rotation, but they barely work and the touch inputs are still reversed.
Sadly I only have access to limited technical support (I live in Bolivia) but I was wondering if there is any way to fix this, if the phone works perfectly on start up, maybe someone knows how to remain like this, what happens when the screen is locked?
Thank tou very much in advance for any help
Click to expand...
Click to collapse
SteveMurphy said:
Sounds like the digitizer was inverted somehow when the screen was replaced.
Sent from the i777
Click to expand...
Click to collapse
I would say, go back to the tech that replace it for you and tell them to fix it at no charge. But if you were the one that did it, I would suggest to go to someone that know how to do it.
BeenAndroidized said:
I would say, go back to the tech that replace it for you and tell them to fix it at no charge. But if you were the one that did it, I would suggest to go to someone that know how to do it.
Click to expand...
Click to collapse
Thank you, is there any way I can check if this is what has happened?
I cant take it back, Im afraid they could make more damage, and there is no good tech service near me, I have searched a lot.
Is there any way I can do this myself?
I was hoping that since everythings works ok until the screen locks, there may be a software fix for me.
You can do the repair yourself. I'm sure you can find a YouTube video to walk you through it. It might be worth it to tear it down and then rebuild it so you can make sure all the connections are secure and nothing is binding. There is not a lot of space inside, and it's easy to bind the ribbon cable.
Good luck!
Hi, same thing happen to me. Could you fix it?