CSC Problem - Galaxy S III Q&A, Help & Troubleshooting

hey,
i installed Newest Omega rom for a little test, then i flashed again German DBT Stock. I looked at the CSC and it was the Isreal csc (wtf?). I flashed today 4.1.2 DBT and still Isreal CSC. I can´t change the CSC with this https://play.google.com/store/apps/...sMSwxLDEsImNvbS5tYW5uaWFray5jc2NzZWxlY3RvciJd
Anyone know a Solution?

spoxone said:
hey,
i installed Newest Omega rom for a little test, then i flashed again German DBT Stock. I looked at the CSC and it was the Isreal csc (wtf?). I flashed today 4.1.2 DBT and still Isreal CSC. I can´t change the CSC with this https://play.google.com/store/apps/...sMSwxLDEsImNvbS5tYW5uaWFray5jc2NzZWxlY3RvciJd
Anyone know a Solution?
Click to expand...
Click to collapse
that's because the Omega ROM may be based on the Israeli-an CSC

Don't bother if \phone works leave CSC as is .
jje

You say that buy my three phone works but it's not got the hd voice enabled by default. I've been replacing the csc files with my correct csc as I was when the phone was shipped and that seems to get better results for me, as the hd voice is then enabled.
Sent from my GT-I9300 using xda premium

Like i said if it works leave it alone for most CSC is not relevant .
Word is most not all .
3HD or FD on requires correct CSC .
jje

Related

CSC is now ODK after 8.6 Westcrip install

Hi Ive installed Westcrips rom 8.6 which is great but my CSC has changed from XEU to ODK and there is no option for XEU in CSC list. Does it really matter what CSC and can anyone tell me another CSC to use for UK cause dont have XEU in list. Thanks and what a great site
You can just flash csc package from intratech thread should change back to xeu but you might lose all your data
Sent from my GT-I9100 using XDA App
Thanks mate. Is it best to change even if phone seems fine?
byson1984 said:
Thanks mate. Is it best to change even if phone seems fine?
Click to expand...
Click to collapse
CSC is only a few files that list local network settings and its not required for the phone to work . Network settings can be entered manually ,
jje

help need csc package

hey people i need a help i m from pakistan and running stock lf2 rom and lf2 modem and kernel but when i try to update via kies it says ur phone is not supported and yes i know the reason which is there is a csc problem i need it*jplf2(pak)*where as it is showing jvlf1(AFR) in kies some african version i thinkso where to download new csc lf2 file for my country? so that i may flash it via odin individually.
bottom of the page for CSC packages
http://forum.xda-developers.com/showthread.php?t=1671969
goodie said:
bottom of the page for CSC packages
http://forum.xda-developers.com/showthread.php?t=1671969
Click to expand...
Click to collapse
yea man i already checked that page but there is no lf2 csc infact there is an old le9 csc which is also multi csc pkg. i doubt if it works or not bcoz kies recognizes all three exact same version for a phone to update just like
pda lf2
modem lf2
csc lf2 (pak)
wht to do??
actually i specially downloaded lf2 file today from sam mobile for pakistan and i flashed it and there i had a problem with csc then
there is also a lf2 csc but that is in btu for u.k in the end.. would that work??
have you tried *#272*IMEI# & install correct CSC? if that doesnt work what about manually editing the files to get the correct CSC
thats what i had to do when mine kept switching from BTU to KOR, there is no nvram.bin file there is a nv_data.bin
mine seemed to work just editing the mps_code.dat file but i edited both as there is a nv_data.bin.bak if not create one
http://forum.xda-developers.com/showthread.php?t=1124900

[Q] Can't Change my CSC on any rom ..

Hi, i download the app on the Play Store, but it show me only one CSC..
I've tried 4 stock sammy rom but on every i can't change it ..
I'm on Stock LPD which is working very fine, but can't find one with the CSC of my country ..
Look at the screen
tlf55 said:
Hi, i download the app on the Play Store, but it show me only one CSC..
I've tried 4 stock sammy rom but on every i can't change it ..
I'm on Stock LPD which is working very fine, but i want to go on a 4.0.4 rom .. Can't find one with the CSC of my country ..
Look at the screen
Click to expand...
Click to collapse
1. You need to download firmware for worth multicsc / the one for your region.
2. With 4.0.4 ROM, did you mean custom ROM or unmodified stock firmware?
3. If you really want to get a firmware with your country's csc code, then you have to post your country of choice/interest
Swyped from my Samsung Galaxy SII
I know it can make any sense, but on LPG (CSC = NEE) my mobile data doesn't work proprely .. even if i flash my old Modem and the good RIL (LPW) but when i come back to stock LPD ( CSC = LUX ) which is modem LPW my mobile data works perfectly !
So i think it's a CSC problem ? maybe with my carrier ?
tlf55 said:
I know it can make any sense, but on LPG (CSC = NEE) my mobile data doesn't work proprely .. even if i flash my old Modem and the good RIL (LPW) but when i come back to stock LPD ( CSC = LUX ) which is modem LPW my mobile data works perfectly !
So i think it's a CSC problem ? maybe with my carrier ?
Click to expand...
Click to collapse
No. Csc doesn't have anything to do with network signal.
Since your phone works perfectly, what do you want now?
I asked you some questions but you haven't answer them yet
Swyped from my Samsung Galaxy SII
Jokesy said:
No. Csc doesn't have anything to do with network signal.
Since your phone works perfectly, what do you want now?
I asked you some questions but you haven't answer them yet
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Sorry by 4.0.4 i mean stock LPX but it has a NEE CSC .. So while surfing on internet with my mobile data, it doesn't work good ..
I just wanted to know if i can flash a NEE CSC firmware but change it to LUX ?
I'm pretty sure that's a CSC problem because when i flash a NEE CSC firmware with the same modem that used to work good on my old firmware it doesn't work .. But when i flash back a firmware with LUX CSC all works good, so now i want to flash LPX but it has NEE CSC ..
If your phone was branded (only one CSC) and you want to change it, than you must flash any stock multi CSC firmware (Odin will be the best solution in this case). Than you should change CSC manually with app or service code. You have already tried those steps but after flashing you must perform factory reset to rebuild csc system information and remove old csc from efs partition. Do this from settings menu or 3e recovery.
To fully remove brand and flush old CSC wipe is needed. Some informations about it are also stored in efs partition and sometimes flashing one file firmware doesn't change it.
If this will not help than you must flash 3 files firmware (which have included wipe commands in scripts). You will be able to change CSC without any problems.
--
i9.0.1.3k galaxy imperator
tlf55 said:
Sorry by 4.0.4 i mean stock LPX but it has a NEE CSC .. So while surfing on internet with my mobile data, it doesn't work good ..
I just wanted to know if i can flash a NEE CSC firmware but change it to LUX ?
I'm pretty sure that's a CSC problem because when i flash a NEE CSC firmware with the same modem that used to work good on my old firmware it doesn't work .. But when i flash back a firmware with LUX CSC all works good, so now i want to flash LPX but it has NEE CSC ..
Click to expand...
Click to collapse
Ok. Now I got your point but you must understand that because a modem works fine for you in your previous firmware does not necessarily means it will work the same way. That's why we have different modems out there.
For example, my original modem, XXKE7 did not work well for me after I flashed to 2.3.6 gingerbread custom ROM, but XXKI3 worked perfect for me. On upgrading to ICS it was XXKI4 that worked best for me and since moving to Aosp based Roms, XXLPW is the one working best for me.
I hope you get this now.
CSC has nothing to do with network signal. The same way modem does not affect WiFi performance.
90% of custom Roms out there have unknown/no CSC, and Network signals work perfect for people using them. You only need to find the right modem, this is not constant.
End.
To the main issue:
If you still want to flash the Rom with your country's CSC, then let me know your COUNTRY of choice.
Swyped from my Samsung Galaxy SII
Jokesy said:
Ok. Now I got your point but you must understand that because a modem works fine for you in your previous firmware does not necessarily means it will work the same way. That's why we have different modems out there.
For example, my original modem, XXKE7 did not work well for me after I flashed to 2.3.6 gingerbread custom ROM, but XXKI3 worked perfect for me. On upgrading to ICS it was XXKI4 that worked best for me and since moving to Aosp based Roms, XXLPW is the one working best for me.
I hope you get this now.
CSC has nothing to do with network signal. The same way modem does not affect WiFi performance.
90% of custom Roms out there have unknown/no CSC, and Network signals work perfect for people using them. You only need to find the right modem, this is not constant.
End.
To the main issue:
If you still want to flash the Rom with your country's CSC, then let me know your COUNTRY of choice.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks understood now ! i will find a rom which fit perfectly
Thanks to SirKunon too

CSC for UK BTU JB

Has anyone got the CSC for the new UK BTU?
kickasskev said:
has anyone got the csc for the new uk btu?
Click to expand...
Click to collapse
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
circuit89 said:
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
Click to expand...
Click to collapse
Yes thats how it should be, but mine says unknown
Sent from my GT-I9300 using Tapatalk 2
Mine also says unknown after flashing the UK firmware. I've tried flashing the CSC file, but it still shows as being unknown.
I'm also unable to access the CSC selector, after entering *#272*IMEI# I get a message -
"Connection problem or invalid MMI code"
Try sgs1/2 csc changer from play store
I've flashed stock UK unbranded mine csc is fine try flash again
Sent from my GT-I9300 using xda app-developers app
i've tried 2 different CSC changers, CSC Select and SGS CSC, both dont work. Its not a major issue for me, as long as it isnt causinga problem with something i dont know about. My phone originally had the Hong Kong CSC (i bought it online), so whetehr this is causing the problem, i dont know
Get it from here mate.. http://forum.xda-developers.com/showthread.php?p=30028854
There's a BTU CSC there.
just flash thru odin/mobile odin.
Sent from my GT-I9300 using xda app-developers app
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Puzzled by CSC.
woodplease said:
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Click to expand...
Click to collapse
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
JJEgan said:
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thank you very much. I will check those out.
OK got my CSC sorted out but my CP is on XXDLID what and where do I go to change this?????
Anyone?
Sent from my GT-I9300 using Tapatalk 2
koorasoc said:
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Click to expand...
Click to collapse
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
CSC problem
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Kickasskev said:
Anyone?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
suspktu said:
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Click to expand...
Click to collapse
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
zoot1 said:
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Thank you for the quick answer. A full wipe u mean wipe data and cache from recovery mode?
art_arev said:
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
Click to expand...
Click to collapse
Yes, thank you, I've now realised this. I bought the phone on Amazon where it was described as UK unlocked. Obviously this wasn't entirely accurate..
I'm new to this so I'm going to wait a little longer in case the official update is released shortly while I do some more reading.
If I wanted to go the second root, just out of interest, how did you know to suggest XXDLJ4 as the ROM I need to flash, there seem to be so many out there. Sorry if this is a total noob question.
Thanks.
Simple method is to use CHECKFUS to download any current firmware and flash via ODIN .
jje

flashed latest unidet kingdom firmware bur csc is still "kor" how to change?

flashed latest unidet kingdom firmware bur csc is still "kor" how to change?
Hey, just flashed my 9300 with latest firmware but i still see the csc as "kor" its need to change to btu or oxx and its doesn't.
what to do?
in odin it sas "kor" firmware not supported and my last 9300 was "btu" or "oxx".
Re: flashed latest unidet kingdom firmware bur csc is still "kor" how to change?
Look into general section, there is a csc threat, might help.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Look into general section, there is a csc threat, might help.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
was just looking this up actually
http://forum.xda-developers.com/showthread.php?t=2080181 - the power of the SEARCH feature
Thanks but what you wrote is for rooted device, im on stok.
and as i remember a new flash should change the csc with the firmware.
Ocean2k said:
Thanks but what you wrote is for rooted device, im on stok.
and as i remember a new flash should change the csc with the firmware.
Click to expand...
Click to collapse
Silly us! :silly: Why do we always assume people are rooted? Because they don't say otherwise! - can't help anymore im afraid, i don't do stock!
ok, i'll help a little more - which firmware did you flash? where did you get it from?
Ocean2k said:
Hey, just flashed my 9300 with latest firmware but i still see the csc as "kor" its need to change to btu or oxx and its doesn't.
what to do?
in odin it sas "kor" firmware not supported and my last 9300 was "btu" or "oxx".
Click to expand...
Click to collapse
use Kies to restore original firmware and update via Kies .
http://forum.xda-developers.com/showthread.php?t=1978840
Not 100% sure if above will actually change your CSC as i never use Kies and never use a CSC .
Or ignore KOR
Or root phone .
jje

Categories

Resources