Has anyone got the CSC for the new UK BTU?
kickasskev said:
has anyone got the csc for the new uk btu?
Click to expand...
Click to collapse
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
circuit89 said:
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
Click to expand...
Click to collapse
Yes thats how it should be, but mine says unknown
Sent from my GT-I9300 using Tapatalk 2
Mine also says unknown after flashing the UK firmware. I've tried flashing the CSC file, but it still shows as being unknown.
I'm also unable to access the CSC selector, after entering *#272*IMEI# I get a message -
"Connection problem or invalid MMI code"
Try sgs1/2 csc changer from play store
I've flashed stock UK unbranded mine csc is fine try flash again
Sent from my GT-I9300 using xda app-developers app
i've tried 2 different CSC changers, CSC Select and SGS CSC, both dont work. Its not a major issue for me, as long as it isnt causinga problem with something i dont know about. My phone originally had the Hong Kong CSC (i bought it online), so whetehr this is causing the problem, i dont know
Get it from here mate.. http://forum.xda-developers.com/showthread.php?p=30028854
There's a BTU CSC there.
just flash thru odin/mobile odin.
Sent from my GT-I9300 using xda app-developers app
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Puzzled by CSC.
woodplease said:
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Click to expand...
Click to collapse
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
JJEgan said:
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thank you very much. I will check those out.
OK got my CSC sorted out but my CP is on XXDLID what and where do I go to change this?????
Anyone?
Sent from my GT-I9300 using Tapatalk 2
koorasoc said:
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Click to expand...
Click to collapse
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
CSC problem
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Kickasskev said:
Anyone?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
suspktu said:
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Click to expand...
Click to collapse
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
zoot1 said:
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Thank you for the quick answer. A full wipe u mean wipe data and cache from recovery mode?
art_arev said:
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
Click to expand...
Click to collapse
Yes, thank you, I've now realised this. I bought the phone on Amazon where it was described as UK unlocked. Obviously this wasn't entirely accurate..
I'm new to this so I'm going to wait a little longer in case the official update is released shortly while I do some more reading.
If I wanted to go the second root, just out of interest, how did you know to suggest XXDLJ4 as the ROM I need to flash, there seem to be so many out there. Sorry if this is a total noob question.
Thanks.
Simple method is to use CHECKFUS to download any current firmware and flash via ODIN .
jje
Related
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Guide here in OP:
[Guide+ROMS]Odin Flash+Root Guide & Stock Firmwares LE4/6/8/9/F/D, LF1/2
Post #11 >> individual CSC packages
My modem isn't there! Should I flash any other???
raphaelmo said:
My modem isn't there! Should I flash any other???
Click to expand...
Click to collapse
My apologises, CSC are in post #10
http://forum.xda-developers.com/showpost.php?p=26530885&postcount=10
Just use the guide in post #1 to flash with Odin CSC section
Sent from my GT-I9300 using xda premium
If you used MobileODIN, try reflashing the same ROM, but having the .md5 in the external SD card, not in the internal storage.
I had this issue once and that's what worked for me.
Anyhow, forget about the Brazilian ROMs (such as ZTO). They are all outdated already.
Get one from NEE (new) or ITV (newest). They are better, newer, leaner and work flawlessly in Brazil (and yes, they both contain Brazilian Portuguese).
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
raphaelmo said:
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
Click to expand...
Click to collapse
Raphael, if you're going to use the non-GUI version of CheckFus Downloader, this is the command line to get it:
Code:
CheckFusDownloaderCmd.exe -dl I9300XXALF6/I9300ITVALF1/I9300XXLF5/I9300XXALF6 ITV GT-I9300
Otherwise, for the GUI version, just copy/paste the parts below in the "Firmware info" of CheckFus Downloader 2.1:
Product Code: GT-I9300MBDITV
PDA: I9300XXALF6
CSC: I9300ITVALF1
Phone: I9300XXLF5
then click on "Check Firmware" and then "Download".
it was not so easy to find it in checkfus...I didn't find in gui version, and on nongui I downloaded, but after the download the program crashes and broke the file. 3 times.
But I found it at Sammobile, downloaded and already flashed! Thank you again!
Mine's also says CSC Unknown... I'm on Official JB Polish rom... do I have to flash that CSC package?? But what is the one correspondent to the Official JB Polish??
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
CSC may play a part if your network has fast dormancy .
CSC essentially contains a list of network setting for local areas .
Example
<Country>UK & IRE</Country><CountryISO>GB</CountryISO><Region>EUR</Region><SalesCode>BTU</SalesCode><NbNetworkInfo>20</NbNetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay Monthly</NetworkName></NetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay & Go</NetworkName></NetworkInfo>-<NetworkInfo>
CSC code is part of the HDSWVER code that is used for Kies /Ota updates if anyone actually uses that route .
jje
raphaelmo said:
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Click to expand...
Click to collapse
donalgodon said:
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
Click to expand...
Click to collapse
You have corrupted CSC, Flash the rom again in Odin as CSC, i.e. put the MD5 file in CSC instead of PDA and it will fix the problem.
You have better reset your firmware by using "Firmware Upgrade And Initialization" in your Samsung KIES 2.5.0.12114_1.
You don't need a correct CSC for your phone as it will just download the firmware for you according to the serial number you provided to the software. However, please back up your phone first as it may delete all your data.
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
donalgodon said:
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
Click to expand...
Click to collapse
I am not sure about that. Maybe you just try to download the CSC corresponding to your firmware version and flash it with odin, but I don't know if it will reset your phone.
Anyone who really does know how to fix this (or if it is even necessary)?
I also had this problem. Reflashing the firmware again fix it for me.
Sent from my Galaxy Nexus using Tapatalk 2
Reflashed via desktop Odin, rooted via Chainfire's latest root method. Reset. Flashed CWM touch. Device status is Normal and CSC is correct.
Just for future reference, in case anyone searches for this later. This was the actual problem.
http://forum.xda-developers.com/showthread.php?t=1950082
Simply reflashing the ROM via Mobile Odin and allowing the stock recovery to be flashed solved it. Flash the CWM recovery later, if you want it.
Works like a charm.
Hello.This forum si amazing help me a lot reading and solving my problems bu...
Story short flash 4.1.1 firmware from this link http://forum.xda-developers.com/showthread.php?t=1646610 but because i`m living in UK i cant choose UK CSC code it`s just not there ( i try with *#272* ImeI# but is giving me error so i try with CSC changer from Play Store) so i decide to go back to 4.0.4 and then my problem starts.I try with Odin and 4.0.4 firmware the result was it`s freezes on samsung logo.
Then i used Kies to recover my firmware,Kies complete successfully but again freezes on Samsung Logo.I then try with Vodafone firmware (pay and go handset) same result.The only time when the phone boot properly is when i`m using 4.1.1 .If someone can help me how to go back to OTA 4.0.4 and bypass Samsung Logo.Thank You and my apologies for my bad english.Thank you again
After flashing to ICS, you need to boot into recovery and factory reset.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
After flashing to ICS, you need to boot into recovery and factory reset.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks i did it and after i clean the cashe the phone boot up.Too bad there is no CSC for UK yet i really like 4.1.1 speed is amazing and there is no lag at all.
No need to change the csc. The csc is the one for that firmware, all you need to do is select your language during setup. Firmwares with different cscs are beginning to be rolled out as we speak.
I'm running polish stock rooted until UK 4.1.1 becomes available
Sent from my GT-I9300 using xda app-developers app
Thanks i did it and after i clean the cashe the phone boot up.Too bad there is no CSC for UK
Of course you can have a U K CSC .
CSC is not firmware you appear confused .
jje
JJEgan said:
Thanks i did it and after i clean the cashe the phone boot up.Too bad there is no CSC for UK
Of course you can have a U K CSC .
CSC is not firmware you appear confused .
jje
Click to expand...
Click to collapse
I'm not sure I know csc is not firmware but if I'm with XEO not with BTU is there any problems that can occurs?
Vladimir1321 said:
I'm not sure I know csc is not firmware but if I'm with XEO not with BTU is there any problems that can occurs?
Click to expand...
Click to collapse
the only real problem could potentially be fast dormancy support, from what I am aware, but I'm on it in UK and no problems here, so good to go really, I just left the csc as it is
Hi,
My bro got a 2nd hand S3 from CEX in UK, when we connect it to Kies it says...
'Your device's current firmware version is not supported to update firmware via Kies'
The current version is PDA:LI5 / PHONE:LI5 / CSC:LI5 (BTU)
It is supposed to be on O2,( has O2 stickers and box ) but I think it has been flashed with a generic firmware. Is this why Kies gives the above message? Don't think it's rooted, device status says normal.
Can I simply flash the 4.1.2 O2 firmware from SamMobile using Odin? If so do I need to do the PDA, PHONE & CSC, the guide on SamMobile also says to Re-Partition is the necessary? I am sure when I did my own S3 I just did the PDA part.
Will this wipe everything?
Regards,.
Les
Well I went ahead and flashed it using Odin, but still Kies doesn't like it. It now has the O2 4.1.2 firmware, with the O2 bubble screen on boot.
Kies says version = PDA:LL4/PHONE:LK1/CSC:LL1 (BTU)
Thought it was something to do with the CSC, I tried the Samsung Galaxy S / S2 / S3 CSC app but get and error 'preconfig does not support singleCSC'
Anyone have any ideas?
Regards,
Les
PointyUK said:
Well I went ahead and flashed it using Odin, but still Kies doesn't like it. It now has the O2 4.1.2 firmware, with the O2 bubble screen on boot.
Kies says version = PDA:LL4/PHONE:LK1/CSC:LL1 (BTU)
Thought it was something to do with the CSC, I tried the Samsung Galaxy S / S2 / S3 CSC app but get and error 'preconfig does not support singleCSC'
Anyone have any ideas?
Regards,
Les
Click to expand...
Click to collapse
Sorry to bump this thread, but I haven't found an answer yet.
Anyone got any ideas?
Regards,
Les
PointyUK said:
Sorry to bump this thread, but I haven't found an answer yet.
Anyone got any ideas?
Regards,
Les
Click to expand...
Click to collapse
After flashing via Odin factory reset it. I had that problem too with kies. I flash jellybean firmware but kies would not recognize it. Factory resetting fix my kies problem. HTH.
Sent from my Galaxy Nexus using Tapatalk 2
Right well the problem kies is having is that the phone looked like it had the latest LL5 version at the start ( LL5 is the European Vodafone version) but the phones CSC is set to generic unlocked UK model(Btu). Even after your o2 flash the csc is still set to btu. So because the csc isn't matching the firmware, kies won't allow the firmware upgrade.
Either look to change the csc to o2u(UK o2 csc code) or flash the Btu firmware.
Edit: to change csc usually a full factory reset will change it or a 2nd flash of the o2 firmware should help. Even the csc app u mentioned earlier should help but be warned changing csc will wipe the phone using the app.
Sent from my GT-I9300 using xda premium
Thanks for the replies guys.
I can confirm that a factory reset and then a 2nd flash with the o2 firmware has fixed the problem.
Regards,
Les
Hi there! I need help please.
I got an S3 with a Vodafon-Italy firmware. Since I was experiencing a lot of freezing problems lately, I decided to flash the english firmware (I9300XXEMB5_I9300OXAEMB5_BTU) that everyone said fixed these problems. I followed the guide on here (http://forum.xda-developers.com/showthread.php?t=1671969) and everything went fine. Problem is, when I connected the phone with kies, it said i still had OMN (vodafone) csc. So i decided to hard reset the phone and flash it again, and now kies says I have KOR csc. Why the flash wont give me a BTU csc, which is the one for the firmware I flashed?
What bothers me is that if I ever need to use warranty, I'll have to flash back the original firmware (Vodafone-Italy with OMN csc), but I guess that even if i flash that I guess I'll still get a KOR csc.
So my question is: what did i do wrong? Why do I get KOR? And how do i fix it?
Thank you in advance for any help you can give me...
PS My cell isnt rooted, and I rather not root it, so using some tool to change the csc I guess won't work.
BTU firmwares have KOR as the default CSC.
Also, questions are better off in the dedicated questions section.
Sent from my GT-I9300 using Tapatalk 2
Theshawty said:
BTU firmwares have KOR as the default CSC.
Click to expand...
Click to collapse
First of all thanks for your help... but are you really sure about this? I mean, kies says I won't be able to update my firmware... and I guess that happens because it shows as KOR... which would mean that every english user with a BTU firmware wouldn't be allowed to update with kies...it wouldnt make much sense tho... shouldnt they be marked as BTU? If what you say is true, tho, that means that If I flash back the original Vodafone-Italy fw i'll get back OMN... is that correct?
Also, questions are better off in the dedicated questions section.
Click to expand...
Click to collapse
I'm sorry I posted here because it's the same forum where I read the flash guide... If any moderator wants to move this thread somewhere else, sorry for the trouble.
when a hard reset is done, the CSC resets to factory settings, in this case "KOR" (Korea).
Search on Sammobile for the Vodafone-Italy fw and flash via odin.
rockler said:
when a hard reset is done, the CSC resets to factory settings, in this case "KOR" (Korea).
Search on Sammobile for the Vodafone-Italy fw and flash via odin.
Click to expand...
Click to collapse
Thanks for your help.
I'm kinda new to this world so sorry in advance if I ask a stupid question.
If I understood correctly... the BTU firmware by default uses KOR csc, so when I did the hard reset with that fw installed, the csc was set to KOR.
Once I flash the Vodafone-Italy fw back, and I do a hard reset with that one installed, the csc will be set to the csc that that fw uses by default, which should be OMN (I9300XXELLA_I9300VFGELL3_OMN).
Is that correct? Thanks again!!
We all learn from each other
After flashing the fw you require, a reboot is enough
Make sure your phone is fully charged or at 80% of battery before flashing.
Sent from my GT-I9300 using xda app-developers app
rockler said:
We all learn from each other
After flashing the fw you require, a reboot is enough
Click to expand...
Click to collapse
Mmmm why you say a reboot is enough? I mean... if my csc now is KOR and I flash the vodafone (csc OMN) firmware, after a reboot it'll still appear as KOR... correct? As you said, only with a hard reset the s3 will change csc to the default one used by the firmware.
Just asking to see if I understood how it works... thank you again.
Your csc changed to KOR because you did a hard reset. So installing the italian fw will replace KOR with the csc of italian fw.
You could not update via kies after installing the UK fw is becase your phones csc and the fw csc should match to update via kies.
I use kies only for backing up my phone and use odin to flash new updates.
Sent from my GT-I9300 using xda app-developers app
The ROM you're using is MultiCSC and KOR is set as default. Use app from market called CSC changer and choose BTU from list. F.RESET and all done. Your new CSC will be BTU. If you want CSC-OMN then you need to get right ROM and flash it with Odin.
djembey said:
The ROM you're using is MultiCSC and KOR is set as default. Use app from market called CSC changer and choose BTU from list. F.RESET and all done. Your new CSC will be BTU. If you want CSC-OMN then you need to get right ROM and flash it with Odin.
Click to expand...
Click to collapse
Thanks... but CSC changer does not work anymore on S3 with latest JB firmware i read... is that correct?
tharghan said:
Thanks... but CSC changer does not work anymore on S3 with latest JB firmware i read... is that correct?
Click to expand...
Click to collapse
If you haven't got root access then yes, won't work but other than that it works!
flashed latest unidet kingdom firmware bur csc is still "kor" how to change?
Hey, just flashed my 9300 with latest firmware but i still see the csc as "kor" its need to change to btu or oxx and its doesn't.
what to do?
in odin it sas "kor" firmware not supported and my last 9300 was "btu" or "oxx".
Re: flashed latest unidet kingdom firmware bur csc is still "kor" how to change?
Look into general section, there is a csc threat, might help.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Look into general section, there is a csc threat, might help.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
was just looking this up actually
http://forum.xda-developers.com/showthread.php?t=2080181 - the power of the SEARCH feature
Thanks but what you wrote is for rooted device, im on stok.
and as i remember a new flash should change the csc with the firmware.
Ocean2k said:
Thanks but what you wrote is for rooted device, im on stok.
and as i remember a new flash should change the csc with the firmware.
Click to expand...
Click to collapse
Silly us! :silly: Why do we always assume people are rooted? Because they don't say otherwise! - can't help anymore im afraid, i don't do stock!
ok, i'll help a little more - which firmware did you flash? where did you get it from?
Ocean2k said:
Hey, just flashed my 9300 with latest firmware but i still see the csc as "kor" its need to change to btu or oxx and its doesn't.
what to do?
in odin it sas "kor" firmware not supported and my last 9300 was "btu" or "oxx".
Click to expand...
Click to collapse
use Kies to restore original firmware and update via Kies .
http://forum.xda-developers.com/showthread.php?t=1978840
Not 100% sure if above will actually change your CSC as i never use Kies and never use a CSC .
Or ignore KOR
Or root phone .
jje