Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Guide here in OP:
[Guide+ROMS]Odin Flash+Root Guide & Stock Firmwares LE4/6/8/9/F/D, LF1/2
Post #11 >> individual CSC packages
My modem isn't there! Should I flash any other???
raphaelmo said:
My modem isn't there! Should I flash any other???
Click to expand...
Click to collapse
My apologises, CSC are in post #10
http://forum.xda-developers.com/showpost.php?p=26530885&postcount=10
Just use the guide in post #1 to flash with Odin CSC section
Sent from my GT-I9300 using xda premium
If you used MobileODIN, try reflashing the same ROM, but having the .md5 in the external SD card, not in the internal storage.
I had this issue once and that's what worked for me.
Anyhow, forget about the Brazilian ROMs (such as ZTO). They are all outdated already.
Get one from NEE (new) or ITV (newest). They are better, newer, leaner and work flawlessly in Brazil (and yes, they both contain Brazilian Portuguese).
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
raphaelmo said:
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
Click to expand...
Click to collapse
Raphael, if you're going to use the non-GUI version of CheckFus Downloader, this is the command line to get it:
Code:
CheckFusDownloaderCmd.exe -dl I9300XXALF6/I9300ITVALF1/I9300XXLF5/I9300XXALF6 ITV GT-I9300
Otherwise, for the GUI version, just copy/paste the parts below in the "Firmware info" of CheckFus Downloader 2.1:
Product Code: GT-I9300MBDITV
PDA: I9300XXALF6
CSC: I9300ITVALF1
Phone: I9300XXLF5
then click on "Check Firmware" and then "Download".
it was not so easy to find it in checkfus...I didn't find in gui version, and on nongui I downloaded, but after the download the program crashes and broke the file. 3 times.
But I found it at Sammobile, downloaded and already flashed! Thank you again!
Mine's also says CSC Unknown... I'm on Official JB Polish rom... do I have to flash that CSC package?? But what is the one correspondent to the Official JB Polish??
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
CSC may play a part if your network has fast dormancy .
CSC essentially contains a list of network setting for local areas .
Example
<Country>UK & IRE</Country><CountryISO>GB</CountryISO><Region>EUR</Region><SalesCode>BTU</SalesCode><NbNetworkInfo>20</NbNetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay Monthly</NetworkName></NetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay & Go</NetworkName></NetworkInfo>-<NetworkInfo>
CSC code is part of the HDSWVER code that is used for Kies /Ota updates if anyone actually uses that route .
jje
raphaelmo said:
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Click to expand...
Click to collapse
donalgodon said:
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
Click to expand...
Click to collapse
You have corrupted CSC, Flash the rom again in Odin as CSC, i.e. put the MD5 file in CSC instead of PDA and it will fix the problem.
You have better reset your firmware by using "Firmware Upgrade And Initialization" in your Samsung KIES 2.5.0.12114_1.
You don't need a correct CSC for your phone as it will just download the firmware for you according to the serial number you provided to the software. However, please back up your phone first as it may delete all your data.
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
donalgodon said:
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
Click to expand...
Click to collapse
I am not sure about that. Maybe you just try to download the CSC corresponding to your firmware version and flash it with odin, but I don't know if it will reset your phone.
Anyone who really does know how to fix this (or if it is even necessary)?
I also had this problem. Reflashing the firmware again fix it for me.
Sent from my Galaxy Nexus using Tapatalk 2
Reflashed via desktop Odin, rooted via Chainfire's latest root method. Reset. Flashed CWM touch. Device status is Normal and CSC is correct.
Just for future reference, in case anyone searches for this later. This was the actual problem.
http://forum.xda-developers.com/showthread.php?t=1950082
Simply reflashing the ROM via Mobile Odin and allowing the stock recovery to be flashed solved it. Flash the CWM recovery later, if you want it.
Works like a charm.
Related
Hi,
Bought a GS 2 a couple of days back and its running the following firmware
Baseband : I9100DDKE4
Kernel: 2.6.35.7-I9100XWKF3-CL276555
BUILD NUMBER - XWKF3
Have a few queries regarding flashing firmware
1) Can i flash the KJ1 firmware from Intratech's official firmware list?
XWKJ1
Android 2.3.5
This package has: PDA: XWKJ1| Modem/phone: XXKI3| CSC: XEUKH2
Download: http://www.multiupload.com/QYQLC8KGJ8
XWKJ1 Stock Kernel: http://www.multiupload.com/3W4XXTHFSZ
Password: [email protected]
Click to expand...
Click to collapse
2) The firmware mentioned above has only one file.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
Click to expand...
Click to collapse
3) Since the above package only contains one file, updating to the above firmware would change the CSC. I'm from India. And hence i would lose the settings.
How should i proceed?
I am very much new to this. The above questions maybe / are silly, but would like to know how this works.
Many thanks in advance.
Yes using odin, you can always flash another csc after, I suggest you read the thread and understand the basics of flashing firmware, before you proceed, flash cf root using odin so you will be rooted and reboot into recovery or use cwm app that comes with cf root and do a backup, so if things go wrong you can go back into recovery and restore back.
You can find cf root in original dev section.
Sent from my GT-I9100 using Tapatalk
The firmware update contains a baseband for a different country. If I update using the above, would I lose my network/data connectivity?
Thanks,
Shray
nikzDHD said:
Yes using odin, you can always flash another csc after, I suggest you read the thread and understand the basics of flashing firmware, before you proceed, flash cf root using odin so you will be rooted and reboot into recovery or use cwm app that comes with cf root and do a backup, so if things go wrong you can go back into recovery and restore back.
You can find cf root in original dev section.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
So if i update to the package without flashing the original CSC back, would i still be able to access my mobile network and data?
In other words, does the CSC have any carrier settings? I own a unlocked the GS2
Any help on my query?
Yes will be able to access the internet.
I tried a firmware of different country and even after that my GPRS and general call and text were working fine.
Later i flashed Indian CSC.
shrayv said:
The firmware update contains a baseband for a different country. If I update using the above, would I lose my network/data connectivity?
Thanks,
Shray
Click to expand...
Click to collapse
The CSC contains some customizations, but responsible for your baseband/network and data connectivity is the Modem/Phone part.
As there are many other users of your region/country running on Intratech's ROM versions, this should work for you as well.
P.S.: I prefer Frankenstein versions, as you can combine them with any other Modem/Phone and/or CSC.
Just download the files you need/want to use, put them into the corresponding section in Odin and flash them at once to your phone.
Good luck !
Hey happy people out there!
I hope you are doing well. Since January 29th I have got a S2 phone which is almost brilliant. It is worth the money - definitely.
Unfortunately my phone is running on 2.3.4 and there is no update available in Kies.
I would like to update because people say that the battery management is much better on 2.3.5
My phone specifications:
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100DBTKH1
Build Info: 14. Sep. 2011 KST 2011
I was searching the last two days to find the appropriate update but there are so many different types of firmwares that I am not sure which one is the right for my phone. So that I need advice of some professional people.
So thanks in advance and all the best!!
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Read and pick one for your location .
jje
jje!
Thanks for your fast response! Really nice!
That means I can install every 2.3.5 update but I have to take care of the country code?
john_kaufi said:
jje!
Thanks for your fast response! Really nice!
That means I can install every 2.3.5 update but I have to take care of the country code?
Click to expand...
Click to collapse
Or even 2.3.6 and yes
john_kaufi said:
jje!
Thanks for your fast response! Really nice!
That means I can install every 2.3.5 update but I have to take care of the country code?
Click to expand...
Click to collapse
I had XWKE7 (UK), which is 2.3.3 when I bought the phone, and a few months ago, I updated to XXKI3 (Poland), which is 2.3.5.
I am in the US.
So it MAY make a difference, but probably won't.
EDIT: What I meant was, it MAY make a difference what country firmware you flash, but it may not. Some have reported that flashing a firmware that includes modems specific to one country, can result in signal issues if you are in a different country, because some modems are better suited for the particular frequencies in use in specific countries. That said, if you flash a firmware for a different country, then have signal issues, you can just look at the modem thread and flash modems more suited for your country to "fix" your signal issues.
I have a XXLP6 (4.0.3 ICS) from sammobile. Its quite stable. The only issue is the radio not working but everything else is ok
Sent from my GT-I9100 using Tapatalk
pilililo2 said:
I have a XXLP6 (4.0.3 ICS) from sammobile. Its quite stable. The only issue is the radio not working but everything else is ok
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Nice to know, I guess, but totally irrelevant to this thread.
Hi you cool people!
Thanks for those information!!
Really cool from you!!
ctomgee said:
Nice to know, I guess, but totally irrelevant to this thread.
Click to expand...
Click to collapse
I was just telling him that 4.0.3 was pretty stable. Its not irrelevant. He is asking for opinions and advice.
Sent from my GT-I9100 using Tapatalk
Last time I checked 4.0.3 wasn't 2.3.5 (per the OP's request) :-|
pilililo2 said:
I was just telling him that 4.0.3 was pretty stable. Its not irrelevant. He is asking for opinions and advice.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Somethings either stable or it's not...
john_kaufi said:
Hey happy people out there!
I hope you are doing well. Since January 29th I have got a S2 phone which is almost brilliant. It is worth the money - definitely.
Unfortunately my phone is running on 2.3.4 and there is no update available in Kies.
I would like to update because people say that the battery management is much better on 2.3.5
My phone specifications:
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100DBTKH1
Build Info: 14. Sep. 2011 KST 2011
I was searching the last two days to find the appropriate update but there are so many different types of firmwares that I am not sure which one is the right for my phone. So that I need advice of some professional people.
So thanks in advance and all the best!!
Click to expand...
Click to collapse
XXKI4
Android 2.3.5
This package has: PDA: XXKI4| Modem/phone: XXKI4| CSC: XEUKH2
Download: http://www.multiupload.com/*********
XXKI4 Stock Kernel: http://www.multiupload.com/*********
Password: [email protected]
this the best uk sim free software for 2.3.4 i upgraded to a beta 2.3.6 and now uk apps dont work as its not a uk based update i need to re flash back to xxki
1 but the link is down
androidmad12 said:
XXKI4
Android 2.3.5
This package has: PDA: XXKI4| Modem/phone: XXKI4| CSC: XEUKH2
Download: http://www.multiupload.com/*********
XXKI4 Stock Kernel: http://www.multiupload.com/*********
Password: [email protected]
this the best uk sim free software for 2.3.4 i upgraded to a beta 2.3.6 and now uk apps dont work as its not a uk based update i need to re flash back to xxki
1 but the link is down
Click to expand...
Click to collapse
Multiupload has been shut down permanently.
That looks like one of Intratech's "frankenstein" packages. You'll probably not be able to find anywhere that particular package with that combination of PDA, (XXKI4) Modem, (XXKI4) and CSC. (XEUKH2)
However, I9100XWKI4, which has PDA XWKI4, modem XXKI1, and CSC XEUKH2, is available on both samfirmware.com, and skywanker.net.
I don't really understand why wouldn't you just upgrade to the last 2.3.6
XWLA4 that is. You will lose nothing and your phone will run better.
My two cents.
Get it here.
ctomgee said:
Multiupload has been shut down permanently.
That looks like one of Intratech's "frankenstein" packages. You'll probably not be able to find anywhere that particular package with that combination of PDA, (XXKI4) Modem, (XXKI4) and CSC. (XEUKH2)
However, I9100XWKI4, which has PDA XWKI4, modem XXKI1, and CSC XEUKH2, is available on both samfirmware.com, and skywanker.net.
Click to expand...
Click to collapse
i have down loaded the firm ware again but it does not have the modem only pda ive been on both of the sites only 1 file in the zip no crc and modem its normally 3 files to flash back? gaz
i currently have pda xwki4 crc xeukh2 separate files just need the xxki1 modem for odin
---------- Post added at 11:09 AM ---------- Previous post was at 10:55 AM ----------
victorator said:
I don't really understand why wouldn't you just upgrade to the last 2.3.6
XWLA4 that is. You will lose nothing and your phone will run better.
My two cents.
Get it here.
Click to expand...
Click to collapse
1.STARTED WITH MY PHONES STOCK ROM 2.3.4 PDA XXKI4 PHONE XXKI1 CSC: XEUKH2
2.FLASHED TO #
1.CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5
2.MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
3.GT-I9100-CSC-MULTI-OXAKL1.tar.md5
XXKL1 2.3.6 CURRENT FIRMWARE MODEM CRC (ODIN)
NOW I CANT DOWN GRADE OR UPGRADE THE PHONE?
been looking for a ics packages to re flash or 2.3.4 package
pref the one i started with stock
THIS FILE IS PDA only where are the crc and modem files ?
I9100XWLP7 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP7 (4.0.3)
Region United Kingdom / Ireland
Carrier: SIM FREE (Generic)
Build Date: 3rd April 2012
Modem: XXLPS
CSC: XEULP5 (XEU)
Change List: 340913
CF-Root v5.4 LP7: Download
this is only firmware and not a package
flashed over XXKI1 TO XXKL1 TO XXLPS
the phone froze on ICS XXLPS with just the S logo why ?
Yes, it's just one file. The modem and csc are IN the tar file.
ctomgee said:
Yes, it's just one file. The modem and csc are IN the tar file.
Click to expand...
Click to collapse
so i use the 1 file.tar which is a package file of all the below ? not like the md.5
where or how do i re-flash using a .tar file as Odin has 3 options and do i need a pit file to re-flash again using odin ? flashed ics but phone froze using a .tar file ??
confused
had to flash back to 2.3.6 XXKL1 using 3.md5 files ( which fixed the phone after phone crashed while flashing ics .tar file
where am i going wrong and how can i down grade or upgrade using a tar file don't want to destroy my galaxy s 2 do i use .tar in pda and pit file to re-flash help please?
1.CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar. md5
2.MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
3.GT-I9100-CSC-MULTI-OXAKL1.tar.md5
XXKL1 2.3.6 CURRENT FIRMWARE MODEM CRC (ODIN)
where am i going wrong?
androidmad12 said:
so i use the 1 file.tar which is a package file of all the below ? not like the md.5
where or how do i re-flash using a .tar file as Odin has 3 options and do i need a pit file to re-flash again using odin ? flashed ics but phone froze using a .tar file ??
confused
had to flash back to 2.3.6 XXKL1 using 3.md5 files ( which fixed the phone after phone crashed while flashing ics .tar file
where am i going wrong and how can i down grade or upgrade using a tar file don't want to destroy my galaxy s 2 do i use .tar in pda and pit file to re-flash help please?
1.CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar. md5
2.MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
3.GT-I9100-CSC-MULTI-OXAKL1.tar.md5
XXKL1 2.3.6 CURRENT FIRMWARE MODEM CRC (ODIN)
where am i going wrong?
Click to expand...
Click to collapse
You are WAY overcomplicating things.
Do not use .pit or repartition unless you absolutely have to, and know what you you are doing.
Put the one .tar file in the PDA section, and flash. Done. Use the one victorator linked above. It will work, and is a one file package. (search the linked page for "XWLA4")
If you used a 3 part file before, that's fine. You don't NEED to use a 3 part file again to re-flash. The singular .tar file will contain all the components you need.
EDIT: Actually, above you said:
androidmad12 said:
i have down loaded the firm ware again but it does not have the modem only pda ive been on both of the sites only 1 file in the zip no crc and modem its normally 3 files to flash back? gaz
i currently have pda xwki4 crc xeukh2 separate files just need the xxki1 modem for odin
Click to expand...
Click to collapse
So the PDA XWKI4, did you download it from samfirmware.com, or skywanker.net? If so, that is a 1 part file, and will contain the CSC and modem within it. Just put that in PDA and flash. Leave everything else blank.
ctomgee said:
You are WAY overcomplicating things.
Do not use .pit or repartition unless you absolutely have to, and know what you you are doing.
Put the one .tar file in the PDA section, and flash. Done. Use the one victorator linked above. It will work, and is a one file package. (search the linked page for "XWLA4")
If you used a 3 part file before, that's fine. You don't NEED to use a 3 part file again to re-flash. The singular .tar file will contain all the components you need.
EDIT: Actually, above you said:
So the PDA XWKI4, did you download it from samfirmware.com, or skywanker.net? If so, that is a 1 part file, and will contain the CSC and modem within it. Just put that in PDA and flash. Leave everything else blank.
Click to expand...
Click to collapse
just flashed with GT-I9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1.tar.md5
and phone does not boot ??? why does it not boot every time i re flash? works fine when i flash back to XXKL1 using 3 files ?
and i have downloaded files from both the above sites including separate crc
androidmad12 said:
just flashed with GT-I9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1.tar.md5
and phone does not boot ??? why does it not boot every time i re flash? works fine when i flash back to XXKL1 using 3 files ?
Click to expand...
Click to collapse
What do you mean it does not boot? Does it get stuck on the boot screen? Try a full wipe after the flash. You will lose all data, but more often then not, it will boot after this.
androidmad12 said:
and i have downloaded files from both the above sites including separate crc
Click to expand...
Click to collapse
You meant CSC, not crc, right?
And take a look at the file name "I9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1.tar.md5". If you notice, it has "I9100XWKI4" (PDA), "I9100XEUKH2" (CSC), and "I9100XXKI1" (modem) all in the filename.
EDIT: maybe you should just go here.
Can someone please post me a download link just for a unbranded CSC: I9300OXAALF2. I just want to flash the above file in odin only
please please
please
Rhforrester said:
Can someone please post me a download link just for a unbranded CSC: I9300OXAALF2. I just want to flash the above file in odin only
please please
Click to expand...
Click to collapse
I think you will have to d/l the full firmware m8 and extract it from that.
Sent from my GT-I9300 using xda premium
Its in the usual place a bit of searching finds it .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
try here *COURTESY OF INTRATECH*
remove stock CSC file
Thanks sarbe & [email protected]
THe issue i have is that when install the latest stock rom LF2 it does not remove CSC (HSG) file.
Three takes ages to release the OTA updates and I am looking for a workaround where I can install a stock rom and then have KIES update it.
I have attached a picture of my curret firmware. I have tried LE8 but kies says it does not reconsise the firmware.
When I flash in odin it always say during the flash update " OSM leave CS"
my phone is locked to three network.
Any help from you "wise ones" would be a great help
If you get this to work, might this might be a valid method of network unlock without a network issued unlock code?
Sent from my LG-P920 using xda premium
I'm not completely sure but I think you still need to unlock the phone, changing to standard csc just removes the branding etc (or so I'm lead to believe)
I downloaded the new firmware via OTA on my rotted phone, and it didn't install. I re-rooted it with CF-Root 6.3, but now If I check for software update it says "no update available." The build though is still the old I9300XXALE8 instead of ALF6, so I guess it isn't updated.
Is the updated firmware file saved somewhere, and if yes can I install it via CWM?
What else can I do?
Thanks
Jay
umm you could try sammobile or this link to go directly to sgs3 european official roms
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
and flash it using odin/mobile odin. Mobile odin would probably be better as you can keep root when u flash it
We have a stock rom post look there first .
jje
JJEgan said:
We have a stock rom post look there first .
jje
Click to expand...
Click to collapse
I'm assuming that you are refering to this thread:
http://forum.xda-developers.com/showthread.php?t=1646610
However, I have similar questions as the original poster.
I have CF-Root rooted stock firmware (Sweden, unbranded) and would like to update to the latest available (OTA failed). I know that I can download from sammobile.com or samsung-updates.com, but I have no idea which one to use.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1
http://samsung-updates.com/device/?id=GT-I9300
What has to match? CSC, Country/Carrier? Please enlighten me.
Well I'm new to the galaxy series so I couldn't be 100% sure about what you need to match to be sure you get right one. But I do know if you've used cf root you can still connect to kies, you could connect and either check firmware upgrade version then download that vers from one of the sites or update your phone with kies then type *#1234# in the dialler then using that info download that vers of the firmware to have in the future.
If you do go kies option you'll most likely need to cf root once upgraded and I can't be 100% sure it'll work as I updated my phone with kies before rooting but I know cf root doesn't change anything major so kies should still be able to upgrade.
Sent from my GT-I9300 using xda premium
I'm trying to avoid using Kies. Don't want to install it even. Still "download from one of the sites" is not too assuring. How do I know what sites to trust?
Also, my question was rather does me download have to match entirely or is it enough with the same region?
E.g. one of the links above has the Italian LF6 as latest version. Can I use that?
Sent from my GT-I9300 using Tapatalk 2
shaft77 said:
I'm trying to avoid using Kies. Don't want to install it even. Still "download from one of the sites" is not too assuring. How do I know what sites to trust?
Also, my question was rather does me download have to match entirely or is it enough with the same region?
E.g. one of the links above has the Italian LF6 as latest version. Can I use that?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
well i use sammobile as its the one quoted in the cf root post under the uninstall instructions, I didnt know about samsung-updates till today. Well u could just install kies to see what firmware code its showing as the upgrade then uninstall. Im just checking sammobile at mo for ya
edit:- when u type *#1234# into your keypad whats the 3 codes it spits out?
I checked the sites out and it seems only the full roms are available. Actually I'd prefer just to flash the firmware so that I don't loose all my apps and settings. Or is there a way around this? I realise it's a lame question, but I'm new...
Here is the result of *#1234#
AP: I9300XXALE8
CP: I9300DXLE8
CSC: I9300LBALE5
Thanks for the help
Jiiins said:
I checked the sites out and it seems only the full roms are available. Actually I'd prefer just to flash the firmware so that I don't loose all my apps and settings. Or is there a way around this? I realise it's a lame question, but I'm new...
Here is the result of *#1234#
AP: I9300XXALE8
CP: I9300DXLE8
CSC: I9300LBALE5
Thanks for the help
Click to expand...
Click to collapse
Yeah there orig samsung roms(firmwares), trick is to get the one for your country/region
Ok , if your sure the updated firmware should be a ALF6 version theres only 2 on sammobile
1. Germany unbranded
2. Italy
Wheres about are u from?
Have you tried the kies update method i mentioned earlier?
Kies is samsungs official software for managing your samsung android device it can sync contacts, backup data etc etc but also to update official firmware.
http://www.samsung.com/uk/support/usefulsoftware/KIES/JSP
I have it installed but not using it for backups etc just for when firmware updates are available.
Youve used cf root so the kies method should work ok but youll just need to reroot afterwards.
After several attempts, I managed to use Kies... I had to use a different USB port and it worked.
Thanks a lot!
Has anyone got the CSC for the new UK BTU?
kickasskev said:
has anyone got the csc for the new uk btu?
Click to expand...
Click to collapse
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
circuit89 said:
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
Click to expand...
Click to collapse
Yes thats how it should be, but mine says unknown
Sent from my GT-I9300 using Tapatalk 2
Mine also says unknown after flashing the UK firmware. I've tried flashing the CSC file, but it still shows as being unknown.
I'm also unable to access the CSC selector, after entering *#272*IMEI# I get a message -
"Connection problem or invalid MMI code"
Try sgs1/2 csc changer from play store
I've flashed stock UK unbranded mine csc is fine try flash again
Sent from my GT-I9300 using xda app-developers app
i've tried 2 different CSC changers, CSC Select and SGS CSC, both dont work. Its not a major issue for me, as long as it isnt causinga problem with something i dont know about. My phone originally had the Hong Kong CSC (i bought it online), so whetehr this is causing the problem, i dont know
Get it from here mate.. http://forum.xda-developers.com/showthread.php?p=30028854
There's a BTU CSC there.
just flash thru odin/mobile odin.
Sent from my GT-I9300 using xda app-developers app
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Puzzled by CSC.
woodplease said:
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Click to expand...
Click to collapse
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
JJEgan said:
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thank you very much. I will check those out.
OK got my CSC sorted out but my CP is on XXDLID what and where do I go to change this?????
Anyone?
Sent from my GT-I9300 using Tapatalk 2
koorasoc said:
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Click to expand...
Click to collapse
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
CSC problem
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Kickasskev said:
Anyone?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
suspktu said:
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Click to expand...
Click to collapse
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
zoot1 said:
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Thank you for the quick answer. A full wipe u mean wipe data and cache from recovery mode?
art_arev said:
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
Click to expand...
Click to collapse
Yes, thank you, I've now realised this. I bought the phone on Amazon where it was described as UK unlocked. Obviously this wasn't entirely accurate..
I'm new to this so I'm going to wait a little longer in case the official update is released shortly while I do some more reading.
If I wanted to go the second root, just out of interest, how did you know to suggest XXDLJ4 as the ROM I need to flash, there seem to be so many out there. Sorry if this is a total noob question.
Thanks.
Simple method is to use CHECKFUS to download any current firmware and flash via ODIN .
jje