Related
Hi,
Bought a GS 2 a couple of days back and its running the following firmware
Baseband : I9100DDKE4
Kernel: 2.6.35.7-I9100XWKF3-CL276555
BUILD NUMBER - XWKF3
Have a few queries regarding flashing firmware
1) Can i flash the KJ1 firmware from Intratech's official firmware list?
XWKJ1
Android 2.3.5
This package has: PDA: XWKJ1| Modem/phone: XXKI3| CSC: XEUKH2
Download: http://www.multiupload.com/QYQLC8KGJ8
XWKJ1 Stock Kernel: http://www.multiupload.com/3W4XXTHFSZ
Password: [email protected]
Click to expand...
Click to collapse
2) The firmware mentioned above has only one file.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
Click to expand...
Click to collapse
3) Since the above package only contains one file, updating to the above firmware would change the CSC. I'm from India. And hence i would lose the settings.
How should i proceed?
I am very much new to this. The above questions maybe / are silly, but would like to know how this works.
Many thanks in advance.
Yes using odin, you can always flash another csc after, I suggest you read the thread and understand the basics of flashing firmware, before you proceed, flash cf root using odin so you will be rooted and reboot into recovery or use cwm app that comes with cf root and do a backup, so if things go wrong you can go back into recovery and restore back.
You can find cf root in original dev section.
Sent from my GT-I9100 using Tapatalk
The firmware update contains a baseband for a different country. If I update using the above, would I lose my network/data connectivity?
Thanks,
Shray
nikzDHD said:
Yes using odin, you can always flash another csc after, I suggest you read the thread and understand the basics of flashing firmware, before you proceed, flash cf root using odin so you will be rooted and reboot into recovery or use cwm app that comes with cf root and do a backup, so if things go wrong you can go back into recovery and restore back.
You can find cf root in original dev section.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
So if i update to the package without flashing the original CSC back, would i still be able to access my mobile network and data?
In other words, does the CSC have any carrier settings? I own a unlocked the GS2
Any help on my query?
Yes will be able to access the internet.
I tried a firmware of different country and even after that my GPRS and general call and text were working fine.
Later i flashed Indian CSC.
shrayv said:
The firmware update contains a baseband for a different country. If I update using the above, would I lose my network/data connectivity?
Thanks,
Shray
Click to expand...
Click to collapse
The CSC contains some customizations, but responsible for your baseband/network and data connectivity is the Modem/Phone part.
As there are many other users of your region/country running on Intratech's ROM versions, this should work for you as well.
P.S.: I prefer Frankenstein versions, as you can combine them with any other Modem/Phone and/or CSC.
Just download the files you need/want to use, put them into the corresponding section in Odin and flash them at once to your phone.
Good luck !
Okay so long story short I was stuck in bootloop so I restored my phone back to like 3 months ago and now when I try to upgrade it back to ICS from 2.3.6 in Kies it says I cant it gives this error:
Your device does not support software upgrading via Kies.
Current fireware version : I9100XWKI4/I900XEUKH2/I9100XXLPS/I9100XWKI4 (XEU)
Please help and tell me what I must do I am so lost
Really no one knows?!?!?! Here is some more info if it helps...
GT-I9100
2.3.4
I9100XXLPS
2.6.35.7-I9100XWKI4-CL575468
[email protected] #2
GINGERBREAD.XWKI4
*#1234#
See what you get
I think you will get Lps in phone which is modem.
Just flash the stock modem back and you will get kies working.
Sent from my GT-I9100 using Tapatalk 2
atifsh said:
*#1234#
See what you get
I think you will get Lps in phone which is modem.
Just flash the stock modem back and you will get kies working.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
PDA : I9100XWKI4
PHONE : I9100XXLPS
CSC : I9100XEUKH2
Yeap you were right so which do I flash it to can you give me a link please? I been download one for about an hour now and im scared its the wrong one the file name is: I9100UMKK1_I9100TCEKK1_TCE
Yes wrong
You have to correct modem via Odin and use kies or you can flash the stock Ics whole ROM via Odin, time saving
Sent from my GT-I9100
atifsh said:
Yes wrong
You have to correct modem via Odin and use kies or you can flash the stock Ics whole ROM via Odin, time saving
Sent from my GT-I9100
Click to expand...
Click to collapse
You lost me there LOL how can I fix the modem via Odin? I would also like to upgrade to ICS via Kies since the downloads are so slow over here via Kies would be a lot faster, I download at 350kbs but when I download the full files for use with Odin it only goes at 50kbs soooooo how can I fix the modem? I am downloading a firmware flash will that fix it all?
Just get the UK ICS from Sammobile and flash using Odin. Or use checkfus download.
or wait one hour, I'll post some links, on the move now
Sent from my GT-I9100
Well my phone is the international version so I really don't know which one to chose from sammobile.com :/ The only UK version without a carrier in parenthesis is: I9100XWLP7 4.0.3 2012 April I9100XEULP5 United Kingdom / Ireland
m8 jus download modem frm modem collection and flash it or use cwm ...its simple as tht.or roll back one step behind frm current firmware an then everything is stock again....cheeeerz
Link please for the modem collection? Also explain which one to use please I don't want to screw my phone up anymore then it already is :/
ANOTHER THING!!! ... I live in Dominican Republic, so if I use Check Fus and download the Dominican Republic one can I flash it and it will all change to DR and work again via Kies to upgrade to ICS? Sorry I'm such a noob
atifsh said:
Just get the UK ICS from Sammobile and flash using Odin. Or use checkfus download.
or wait one hour, I'll post some links, on the move now
Sent from my GT-I9100
Click to expand...
Click to collapse
Its been an hour, I NEED YOUUUUUUU!!! LOL You're the only one who helps me! LOL I'm a little impatient sometimes xD
Griingo said:
Its been an hour, I NEED YOUUUUUUU!!! LOL You're the only one who helps me! LOL I'm a little impatient sometimes xD
Click to expand...
Click to collapse
wat u want modem (gb) or ics ?
rocky23 said:
wat u want modem (gb) or ics ?
Click to expand...
Click to collapse
I'm a noob I have no idea I just want my phone to work with Kies again
EDIT: Ignore what I just said, I need it for GB 2.3.4 thats what I have now
Griingo said:
EDIT: Ignore what I just said, I need it for GB 2.3.4 thats what I have now
Click to expand...
Click to collapse
http://skywanker.net/download/downl...9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1.7z download i think its 3 file pakage ,if yes then jus flash the modem in pda in odin....
1: if you want to save something save it on pc or external sdcard
2: dial *2767*3855# it will wipe your phone to factory defaults
3: learn how to use odin
4: download that ICS file uk/ireland thats fine
5: using odin flash it will be fine and you get ICS stock
6: after reboot dial that code again
http://forum.xda-developers.com/showthread.php?t=1544487
you can use sammobile and checkfus
you can flash any rom for i9100 it will work
you dont waste your time for finding modem and flashing when at the end you want ICS.
atifsh said:
1: if you want to save something save it on pc or external sdcard
2: dial *2767*3855# it will wipe your phone to factory defaults
3: learn how to use odin
4: download that ICS file uk/ireland thats fine
5: using odin flash it will be fine and you get ICS stock
6: after reboot dial that code again
http://forum.xda-developers.com/showthread.php?t=1544487
you can use sammobile and checkfus
you can flash any rom for i9100 it will work
you dont waste your time for finding modem and flashing when at the end you want ICS.
Click to expand...
Click to collapse
Okay I wiped it, so anything from checkfus will work? I can download any of themM
Griingo said:
Okay I wiped it, so anything from checkfus will work? I can download any of themM
Click to expand...
Click to collapse
yes as far its for i9100
atifsh said:
yes as far its for i9100
Click to expand...
Click to collapse
Okay well I am going to download one from that thread link you gave me the one that says:
I9100XWLP7 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP7 (4.0.3)
Region United Kingdom / Ireland
Carrier: SIM FREE (Generic)
Build Date: 3rd April 2012
Modem: XXLPS
CSC: XEULP5 (XEU)
Change List: 340913
CF-Root v5.4 LP7: Download
Because it has no carrier it is XXLPS and XEU exactly what I have, THANKS!!! I hope this works I'll let you know after it downloads, unless you have a hotfile account I could use to download it instantly?
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Guide here in OP:
[Guide+ROMS]Odin Flash+Root Guide & Stock Firmwares LE4/6/8/9/F/D, LF1/2
Post #11 >> individual CSC packages
My modem isn't there! Should I flash any other???
raphaelmo said:
My modem isn't there! Should I flash any other???
Click to expand...
Click to collapse
My apologises, CSC are in post #10
http://forum.xda-developers.com/showpost.php?p=26530885&postcount=10
Just use the guide in post #1 to flash with Odin CSC section
Sent from my GT-I9300 using xda premium
If you used MobileODIN, try reflashing the same ROM, but having the .md5 in the external SD card, not in the internal storage.
I had this issue once and that's what worked for me.
Anyhow, forget about the Brazilian ROMs (such as ZTO). They are all outdated already.
Get one from NEE (new) or ITV (newest). They are better, newer, leaner and work flawlessly in Brazil (and yes, they both contain Brazilian Portuguese).
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
raphaelmo said:
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
Click to expand...
Click to collapse
Raphael, if you're going to use the non-GUI version of CheckFus Downloader, this is the command line to get it:
Code:
CheckFusDownloaderCmd.exe -dl I9300XXALF6/I9300ITVALF1/I9300XXLF5/I9300XXALF6 ITV GT-I9300
Otherwise, for the GUI version, just copy/paste the parts below in the "Firmware info" of CheckFus Downloader 2.1:
Product Code: GT-I9300MBDITV
PDA: I9300XXALF6
CSC: I9300ITVALF1
Phone: I9300XXLF5
then click on "Check Firmware" and then "Download".
it was not so easy to find it in checkfus...I didn't find in gui version, and on nongui I downloaded, but after the download the program crashes and broke the file. 3 times.
But I found it at Sammobile, downloaded and already flashed! Thank you again!
Mine's also says CSC Unknown... I'm on Official JB Polish rom... do I have to flash that CSC package?? But what is the one correspondent to the Official JB Polish??
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
CSC may play a part if your network has fast dormancy .
CSC essentially contains a list of network setting for local areas .
Example
<Country>UK & IRE</Country><CountryISO>GB</CountryISO><Region>EUR</Region><SalesCode>BTU</SalesCode><NbNetworkInfo>20</NbNetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay Monthly</NetworkName></NetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay & Go</NetworkName></NetworkInfo>-<NetworkInfo>
CSC code is part of the HDSWVER code that is used for Kies /Ota updates if anyone actually uses that route .
jje
raphaelmo said:
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Click to expand...
Click to collapse
donalgodon said:
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
Click to expand...
Click to collapse
You have corrupted CSC, Flash the rom again in Odin as CSC, i.e. put the MD5 file in CSC instead of PDA and it will fix the problem.
You have better reset your firmware by using "Firmware Upgrade And Initialization" in your Samsung KIES 2.5.0.12114_1.
You don't need a correct CSC for your phone as it will just download the firmware for you according to the serial number you provided to the software. However, please back up your phone first as it may delete all your data.
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
donalgodon said:
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
Click to expand...
Click to collapse
I am not sure about that. Maybe you just try to download the CSC corresponding to your firmware version and flash it with odin, but I don't know if it will reset your phone.
Anyone who really does know how to fix this (or if it is even necessary)?
I also had this problem. Reflashing the firmware again fix it for me.
Sent from my Galaxy Nexus using Tapatalk 2
Reflashed via desktop Odin, rooted via Chainfire's latest root method. Reset. Flashed CWM touch. Device status is Normal and CSC is correct.
Just for future reference, in case anyone searches for this later. This was the actual problem.
http://forum.xda-developers.com/showthread.php?t=1950082
Simply reflashing the ROM via Mobile Odin and allowing the stock recovery to be flashed solved it. Flash the CWM recovery later, if you want it.
Works like a charm.
I downloaded the new firmware via OTA on my rotted phone, and it didn't install. I re-rooted it with CF-Root 6.3, but now If I check for software update it says "no update available." The build though is still the old I9300XXALE8 instead of ALF6, so I guess it isn't updated.
Is the updated firmware file saved somewhere, and if yes can I install it via CWM?
What else can I do?
Thanks
Jay
umm you could try sammobile or this link to go directly to sgs3 european official roms
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
and flash it using odin/mobile odin. Mobile odin would probably be better as you can keep root when u flash it
We have a stock rom post look there first .
jje
JJEgan said:
We have a stock rom post look there first .
jje
Click to expand...
Click to collapse
I'm assuming that you are refering to this thread:
http://forum.xda-developers.com/showthread.php?t=1646610
However, I have similar questions as the original poster.
I have CF-Root rooted stock firmware (Sweden, unbranded) and would like to update to the latest available (OTA failed). I know that I can download from sammobile.com or samsung-updates.com, but I have no idea which one to use.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1
http://samsung-updates.com/device/?id=GT-I9300
What has to match? CSC, Country/Carrier? Please enlighten me.
Well I'm new to the galaxy series so I couldn't be 100% sure about what you need to match to be sure you get right one. But I do know if you've used cf root you can still connect to kies, you could connect and either check firmware upgrade version then download that vers from one of the sites or update your phone with kies then type *#1234# in the dialler then using that info download that vers of the firmware to have in the future.
If you do go kies option you'll most likely need to cf root once upgraded and I can't be 100% sure it'll work as I updated my phone with kies before rooting but I know cf root doesn't change anything major so kies should still be able to upgrade.
Sent from my GT-I9300 using xda premium
I'm trying to avoid using Kies. Don't want to install it even. Still "download from one of the sites" is not too assuring. How do I know what sites to trust?
Also, my question was rather does me download have to match entirely or is it enough with the same region?
E.g. one of the links above has the Italian LF6 as latest version. Can I use that?
Sent from my GT-I9300 using Tapatalk 2
shaft77 said:
I'm trying to avoid using Kies. Don't want to install it even. Still "download from one of the sites" is not too assuring. How do I know what sites to trust?
Also, my question was rather does me download have to match entirely or is it enough with the same region?
E.g. one of the links above has the Italian LF6 as latest version. Can I use that?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
well i use sammobile as its the one quoted in the cf root post under the uninstall instructions, I didnt know about samsung-updates till today. Well u could just install kies to see what firmware code its showing as the upgrade then uninstall. Im just checking sammobile at mo for ya
edit:- when u type *#1234# into your keypad whats the 3 codes it spits out?
I checked the sites out and it seems only the full roms are available. Actually I'd prefer just to flash the firmware so that I don't loose all my apps and settings. Or is there a way around this? I realise it's a lame question, but I'm new...
Here is the result of *#1234#
AP: I9300XXALE8
CP: I9300DXLE8
CSC: I9300LBALE5
Thanks for the help
Jiiins said:
I checked the sites out and it seems only the full roms are available. Actually I'd prefer just to flash the firmware so that I don't loose all my apps and settings. Or is there a way around this? I realise it's a lame question, but I'm new...
Here is the result of *#1234#
AP: I9300XXALE8
CP: I9300DXLE8
CSC: I9300LBALE5
Thanks for the help
Click to expand...
Click to collapse
Yeah there orig samsung roms(firmwares), trick is to get the one for your country/region
Ok , if your sure the updated firmware should be a ALF6 version theres only 2 on sammobile
1. Germany unbranded
2. Italy
Wheres about are u from?
Have you tried the kies update method i mentioned earlier?
Kies is samsungs official software for managing your samsung android device it can sync contacts, backup data etc etc but also to update official firmware.
http://www.samsung.com/uk/support/usefulsoftware/KIES/JSP
I have it installed but not using it for backups etc just for when firmware updates are available.
Youve used cf root so the kies method should work ok but youll just need to reroot afterwards.
After several attempts, I managed to use Kies... I had to use a different USB port and it worked.
Thanks a lot!
Has anyone got the CSC for the new UK BTU?
kickasskev said:
has anyone got the csc for the new uk btu?
Click to expand...
Click to collapse
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
circuit89 said:
ap:- 19300xxdlj4
cp:- 19300xxdlid
csc:- 19300xadlj4
Click to expand...
Click to collapse
Yes thats how it should be, but mine says unknown
Sent from my GT-I9300 using Tapatalk 2
Mine also says unknown after flashing the UK firmware. I've tried flashing the CSC file, but it still shows as being unknown.
I'm also unable to access the CSC selector, after entering *#272*IMEI# I get a message -
"Connection problem or invalid MMI code"
Try sgs1/2 csc changer from play store
I've flashed stock UK unbranded mine csc is fine try flash again
Sent from my GT-I9300 using xda app-developers app
i've tried 2 different CSC changers, CSC Select and SGS CSC, both dont work. Its not a major issue for me, as long as it isnt causinga problem with something i dont know about. My phone originally had the Hong Kong CSC (i bought it online), so whetehr this is causing the problem, i dont know
Get it from here mate.. http://forum.xda-developers.com/showthread.php?p=30028854
There's a BTU CSC there.
just flash thru odin/mobile odin.
Sent from my GT-I9300 using xda app-developers app
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Puzzled by CSC.
woodplease said:
All sorted now, thanks, i did a hard reset and reflashed the uk rom, seemed to sort everything out
Click to expand...
Click to collapse
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
JJEgan said:
Basics Sticky
http://forum.xda-developers.com/showthread.php?t=1927113
CSC facts .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thank you very much. I will check those out.
OK got my CSC sorted out but my CP is on XXDLID what and where do I go to change this?????
Anyone?
Sent from my GT-I9300 using Tapatalk 2
koorasoc said:
Hello,
I'm asking this here because it looks like you guys might be able to help me understand how CSC work.
I'm trying to understand why I'm not getting the UK Jellybean update, bought my Galaxy s3 phone from Amazon it said UK unlocked.
Here's what my phone "About device" says
Model: GT-9300
Version:4.0.4
Baseband version:i9300XXLF2
Build number:IMM76D.I9300XXALF2
When I run *#1234#
it gives
AP: I9300XXALF2
CP:I9300XXLF2
CSC:I9300OJVALF2
Now from what I've read and looking here
http://forum.xda-developers.com/showthread.php?t=1646610
this would indicate a stock official firmware apart from the CSC
As I understand it the above CSC mean my phone is OJV, while to get the UK update I have to have CSC BTU.
I've tried the CSC selector software but BTU doesn't appear and the phone appears to be set on MWD (this is also what KIES shows)
Can anyone help me untangle and understand this.
Thanks.
Click to expand...
Click to collapse
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
CSC problem
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Kickasskev said:
Anyone?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
suspktu said:
Hello.
I have a problem with changing the CSC of my phone. My phone is a branded i9300 with the stock CSC: ORO. I've flashed I9300XXDLJ4 and my CSC became unknown. Then i tried to flash only the BTU CSC but with the same result: CSC unknown. Also i downloaded the CSC select app but it gives me this error : "process com.android.phone has stopped". also i've wiped data and cache before and after flashing the rom. Do you guys have a solution for my problem or if a have a branded phone i cannot change my CSC?
When I enter in recovery mode it always says something like "Manual MODE. Applied Multi CSC. Applied CSC ORO".
Thanks
Click to expand...
Click to collapse
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
zoot1 said:
Dlid is the baseband not the firmware..
so what you have got is correct..no need to change it..
It happens when the cache.img (it has the CSC files) is not flashed properly when you are using Odin.... if the flashing process gets interrupted due to a reboot ..you will have to flash the firmware again after a full wipe..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Thank you for the quick answer. A full wipe u mean wipe data and cache from recovery mode?
art_arev said:
Hi. Your phone has African firmware with a multi CSC. There is no Official release yet for Africa. Thats why you are not getting updates. You have 2 options.......1: To wait for the official update for your firmware 2: to download XXDLJ4 and flash it with odin. You will have exactly same result whichever option you choose.
Cheers
Click to expand...
Click to collapse
Yes, thank you, I've now realised this. I bought the phone on Amazon where it was described as UK unlocked. Obviously this wasn't entirely accurate..
I'm new to this so I'm going to wait a little longer in case the official update is released shortly while I do some more reading.
If I wanted to go the second root, just out of interest, how did you know to suggest XXDLJ4 as the ROM I need to flash, there seem to be so many out there. Sorry if this is a total noob question.
Thanks.
Simple method is to use CHECKFUS to download any current firmware and flash via ODIN .
jje