I have had my Verizon Note 2 for about a month now, and about 2 days ago i read that the processor has Vulnerabilities and mailware problems samusing is trying to fix but about a week ago i went to use my quick glance and my direct call and it wasnt working and when someone calls me i put it up to my ear the screen goes black as it should but then its stuck at the black screen i hit all the buttons cant get to the phone call if i wanted to put it on speaker or even just check a txt message i cant do anything until that person hangs up. The only way i am able to check my txt messages and stuff while on the phone is if i dont put it up to my ear.. so i restarted phone as we all would assume this would fix it well it didnt, so then i did a Factory reset thinking that would just put it back to complete stock and fix it well turns out that didnt work. My phone has never been rooted or anything and never will be. Im running Android 4.1.1 If anyone has any idea how i can fix this it would be gladly appreciated i love the motion features. Also i did the Gyroscope calibration and it didn't make any difference, my proximity sensor is on and glowing red just doesnt work like i said.
Thanks, Stephen
Hawksfan88 said:
I have had my Verizon Note 2 for about a month now, and about 2 days ago i read that the processor has Vulnerabilities and mailware problems samusing is trying to fix but about a week ago i went to use my quick glance and my direct call and it wasnt working and when someone calls me i put it up to my ear the screen goes black as it should but then its stuck at the black screen i hit all the buttons cant get to the phone call if i wanted to put it on speaker or even just check a txt message i cant do anything until that person hangs up. The only way i am able to check my txt messages and stuff while on the phone is if i dont put it up to my ear.. so i restarted phone as we all would assume this would fix it well it didnt, so then i did a Factory reset thinking that would just put it back to complete stock and fix it well turns out that didnt work. My phone has never been rooted or anything and never will be. Im running Android 4.1.1 If anyone has any idea how i can fix this it would be gladly appreciated i love the motion features. Also i did the Gyroscope calibration and it didn't make any difference, my proximity sensor is on and glowing red just doesnt work like i said.
Thanks, Stephen
Click to expand...
Click to collapse
That exploit that you are referring to has nothing to do with your issue... And the proximity sensor does not light up as that is the LED notification light. I have this issue from time to time too and it's just that the sensor is not doing it's job properly but if you just simply hit the home button or power button real quick the screen will turn on. Other than that you may want to check some of your settings... Turn off your "motion" settings and see if that takes care of your issue then find out which one is causing the problem...
The quick glance used to work without any problems at all and i liked that, then all of a sudden one day it just decides not to work and it hasn't worked in a week now, i turned my motion off and when im in a phone call it still locked up at the phone screen i cant do anything until they hang up ive gone through the settings multiple times and nothing, i think imma go to verizon today and ***** about it
Hawksfan88 said:
The quick glance used to work without any problems at all and i liked that, then all of a sudden one day it just decides not to work and it hasn't worked in a week now, i turned my motion off and when im in a phone call it still locked up at the phone screen i cant do anything until they hang up ive gone through the settings multiple times and nothing, i think imma go to verizon today and ***** about it
Click to expand...
Click to collapse
Ya something does not sound right... Do you have a screen protector on your Note 2 that is covering the sensors?
shojus said:
Ya something does not sound right... Do you have a screen protector on your Note 2 that is covering the sensors?
Click to expand...
Click to collapse
No screen protector or anything no case either, my girlfriend yanked the battery while it was on one day idk if that has anything to do with it or not cause after that happened seemed like it didn't work
shojus said:
That exploit that you are referring to has nothing to do with your issue... And the proximity sensor does not light up as that is the LED notification light. I have this issue from time to time too and it's just that the sensor is not doing it's job properly but if you just simply hit the home button or power button real quick the screen will turn on. Other than that you may want to check some of your settings... Turn off your "motion" settings and see if that takes care of your issue then find out which one is causing the problem...
Click to expand...
Click to collapse
actually the proximity sensor DOES light up, it's a very faint red light and it's the left one of the two little holes to the _right_ of the phone speaker, the notification LED is on the left of the phone speaker. This light turns on when in a phone call to indicate that the sensor has been activated.
Related
Overall i am pleased with the update, but i believe i uncovered an issue that others are expriencing as well.
When i have a second line calling me the screen does not wake up allowing me to switch to the second call. In the past, when a second call comes in the proximity sensor would wake the screen and allow me to take or reject the call. Now i cant even see who is calling. Since i use the phone for business, this is a big, big issue. It still works but the screen only wakes up after like the third ring, whereas before it would wake up immediately Anyone else experience this? I tried this on my buddies Vibrant and its the same thing.
So the question to you guys is how do i get the old dialer app back which i believe controls call waiting. Does anyone else know a way around this annoying issue?
Is there something stopping you from pressing the power button to turn the screen on when you hear the call waiting beep?
The prox sensor is not perfect.
-bZj
_____
-sent from my Samsung Vibrant via XDApp
down8 said:
The prox sensor is not perfect.
Click to expand...
Click to collapse
Obviously, if it was perfect this thread wouldn't exist.
nermie said:
Obviously, if it was perfect this thread wouldn't exist.
Click to expand...
Click to collapse
Thank u. I tried the power button, but unfortunately it does not wake the screen.
Thread moved to Q&A.
bump - me too!
pressing the power button results in a lagged response. that is: call waiting call comes in, screen is black. press the button screen stays black. 5-6 seconds pass and then the screen comes on finally and shuts right back off. whereas NOT pressing the power button, the screen stays black for 5-6 seconds and then comes on and stays on.
I am experiencing this problem too. Just started since coming from stock to JI6.
bump... me too, but this happened on a friend of mine's vibrant who was using stock JI6 from the ota, no root nothing and every incoming call if she is on a call has the same behavior.
This issue has gotten so annoying for me, I have unfortunately decided to sell the phone. I loved it, but is failed in the function I use it most as, a phone. Got a g2. Not as glamorous as the vibrant, but it works as a phone.
Hi everyone,
funny thing happened to my Mozart. Whenever I make a call the screen shuts off like it should, but it doesn't turn on again when i remove it from my ear until the call has ended.
Which works fine if the other person hangs up, but it means I can't hang up. Whenever I reach a voicemail i have to take out the battery to hang up!
First i thought it was a rom issue, i had just gotten my hands on the mango beta when i first noticed it. I thought it might be buggy.
But the problem remains after hard reset and flashing with a different rom (pre-nodo & nodo).
I found out that the sensor still works. The screen is reactivated when i shine a bright light (halogen spot or so) onto it - but only for as long as the source shines onto the sensor, else the screen shuts off again. wierdly enough, direct sunlight doesnt seem to be enough to trigger it anymore.
since i upgraded my phone with a 32GB microSD I guess I'm not eligible for warranty, huh? but im pretty sure it happen long after and i didn't accidently break something while opening the phone.
very weird... any ideas?
I had this problem on the weekend.
I removed the matt screenGUARD, and the problem disapeared.
Also you can reactivate the screen by pressing the on/off button...
thanks for your comments.
unfortunately, I don't use a screen protector and the standby-button doesn't work during a call
I have this problem also, with stock 7392 rom. The sensor seems to work when dialing, but stops a short time after a call is connected.
The power button works for me to turn the screen back on however...
Where is the proximity sensor ?
where on the device is the proximity sensor located?
I have been having difficulty with the screen not switching on during phonecalls and I have to remove battery to end outgoing calls. Pressing the power button doesn't help either. I don't have a screenguard to remove.
The problem started not long after, but not immediately after my daughter dropped the phone down the toilet. It took a few days for the phone to gently dry out and it worked again except for some residual water between the screen and the glass.
Richard Fantom said:
where on the device is the proximity sensor located?
Click to expand...
Click to collapse
The sensor is about 1 cm to the top and right of the htc logo. It's barely visible and it is dark violet. (Or something like that, I am not very good at naming colours.)
Anyway, I sometimes also experience problems with sensitivity with HTC Mozart, mostly during calls, especially when the proximity sensor has been activated. Sometimes the home button freezes after a call... It's a bit annoying.
When I answer the phone the screen immediately shuts off, I would like to keep it from doing it right away. For instance, if I want to turn on speaker phone I have to unlock and then press speaker phone while the person is wondering who has answered lol.
Poiuyt00 said:
When I answer the phone the screen immediately shuts off, I would like to keep it from doing it right away. For instance, if I want to turn on speaker phone I have to unlock and then press speaker phone while the person is wondering who has answered lol.
Click to expand...
Click to collapse
thats odd. I know the dimming of the display has to do with the proximity sensor, do you have a screen protector on that my be slightly covering the sensor itself? I had eclipse v2.1 and 2.2 and never encounter this problem. And i just looked through the phone settings on my x2 and cant find any settings related (im currently on cm9 though) may be possible you need to reflash eclipse 2.1 =(
Mine does the same thing and I'm on 2.1. Sometimes it drives me nuts. There's nothing I've found that will help. I'm pretty sure it has something to do with the position of the phone being level or not. That's more technical than I can explain. I've done it so many times now that its really automatic to when it comes to pushing the lock/unlock.
It just hit me: I have noticed that if you unlock the phone to select the speakerphone and or dialpad, I'm pretty sure it stays on. It's just the intial unlocking that's tricky, yet forgetful.
Thanks at least I am not alone in this. It happens other times also but always involves the dialer in some way.
has anyone else noticed that when you answer a phone call the screen turns off ...I hate it ...I have to hit the power button to wake the phone up and end the call .. does anyone have a fix for this ? thanks in advance
thats how all phones have been
is this your first smart phone bro?
if u dont cover the sensor it wont shut off
The screen should only turn off when you put it to your face . Once you pull away the phone the screen should wake . Check your settings you shouldn't have to use the power to wake it .
flex360 said:
thats how all phones have been
is this your first smart phone bro?
if u dont cover the sensor it wont shut off
Click to expand...
Click to collapse
no this is isnt my first smart phone..but the problem is that when I move my face away from the phone the screen should wake up
FlaXB9R said:
The screen should only turn off when you put it to your face . Once you pull away the phone the screen should wake . Check your settings you shouldn't have to use the power to wake it .
Click to expand...
Click to collapse
yea I know right lol ....I looked into the settings and haven't seen any controls for that feature
Yea I noticed the same thing. During a call pulled phone away from my face and screen stayed off. I thought something was wrong but if the call is active screen will come back on, if person hangs up and ur not quick to uncover sensor the screen stays off.
do you guys have screen protectors on your phones??? zaggs perhaps??
If anything is "blocking" your sensor, then it assumes that your face is up to the phone. The phone would then only wake up when the call is ended or the power button is pressed.
You must not have ANYTHING covering the sensor
I would say that this is most likely the case
Mine doesnt do that unless I put the phone up to my ear. Normally I just answer the phone and click it to speaker. When I do that the screen stays on....unless my hand/finger happens to be covering the light sensor.
I have Invisible Shield HD. And there's a cutout for the prox. sensor. Have the same problem. Hopefully HTC will fix it on the next firmware update
Sent from my EVO using xda premium
johnnymcmahan said:
You must not have ANYTHING covering the sensor
I would say that this is most likely the case
Click to expand...
Click to collapse
I'm not so sure about that. My OG Evo has a standard screen protector that "covers" the sensors, and they still work just fine. Maybe those crappy Zagg orange peels will interfere, but I still don't see that being too likely, as they're not really blocking any light.
I have this issue as well and after reading all over for the past two days it appears some units have this issue and some don't. Further complicating the issue is the fact some have screen protectors and some don't. Some have made cutouts on their screen protector and then it works as it should. Very weird.
As soon as I make a call the phone screen goes black while laying on my desk. When the call is over sometimes I can hit the power button to disconnect the call...sometimes I have to hold the power button down 10 seconds to soft reset the phone or I cannot get back to any screen and the call stays connected. Very weird. I got my phone at BB so I am going to stop back and see if they have had any returns and what their thoughts are.
Sent from my EVO using Tapatalk 2
i got my zagg lastnight and it happened
so i reapplied it, not covering the sensor on the top left
and it fixed the issue
flex360 said:
i got my zagg lastnight and it happened
so i reapplied it, not covering the sensor on the top left
and it fixed the issue
Click to expand...
Click to collapse
Yeah I wish that was my issue....I don't have a screen protector on my phone and it doesn't work as designed.
Sent from my EVO using Tapatalk 2
I bought a Zagg and had the issue. They left a hole for a sensor but I think that's the light sensor with the proximity sensor being just to the left and covered. It's a small red light that turns on when making a call. So I made the hole bigger by making it a rectangle uncovering the proximity sensor. Now my phone goes on and off like it should when putting it to my ear. Maybe that'll help some of you? Though I have read some people having the issue without screen protectors.
shadowmikel said:
has anyone else noticed that when you answer a phone call the screen turns off ...I hate it ...I have to hit the power button to wake the phone up and end the call .. does anyone have a fix for this ? thanks in advance
Click to expand...
Click to collapse
Not sure if this will help or not, but in settings/accessibility settings there is an option to end calls using the power button. Might help.
OK, this is a bit OT so I apologize. But I can't figure it out and really dont feel it warrants a new thread. I hope you dont mind me dropping this in here.
Yesterday, at some point, this icon came into my notification bar and i CANNOT, for the life of me figure out what it is.
It looks kinda like a hearing aid or Bluetooth headset icon. But I use neither. I've looked all thru settings trying to figure it out. Checked thru accessibility . Just stumping me, and making me feel REALLY stupid.
Much thanks to anyone who knows.
sent from my Evo LTE, usually.
I experienced the same issue with the screen turning off as soon as I placed a call. I pulled the Zagg HD off and the issue was resolved. I'm going to best buy today to exchange the Zagg for a new one and I will cut a little notch into it to see if it works.
After the screen goes off you have to press the power button but that little red dot next to the proximity sensor stays on unless you flash a bright light on it. I think regardless the proximity sensor is really sensitive and the Zagg HD just makes it that much more finicky.
Being in a dimly lit area makes it worse too.
**Update**
I went to bestbuy and exchanged my Zagg HD for a new one. I got home notched the cutout for the sensor a little more. Installed it and now I don't have any issues with the screen turning off.
scottspa74 said:
OK, this is a bit OT so I apologize. But I can't figure it out and really dont feel it warrants a new thread. I hope you dont mind me dropping this in here.
Yesterday, at some point, this icon came into my notification bar and i CANNOT, for the life of me figure out what it is.
It looks kinda like a hearing aid or Bluetooth headset icon. But I use neither. I've looked all thru settings trying to figure it out. Checked thru accessibility . Just stumping me, and making me feel REALLY stupid.
Much thanks to anyone who knows.
sent from my Evo LTE, usually.
Click to expand...
Click to collapse
Settings/Call Uncheck Hearing aids
Slayer, I'm gonna thank every post if yours I see over the weekend lol.
Thanks. I feel like an idiot. I looked in accessibility thinking any hearing aid stuff would be there
sent from my Evo LTE, usually.
scottspa74 said:
Slayer, I'm gonna thank every post if yours I see over the weekend lol.
Thanks. I feel like an idiot. I looked in accessibility thinking any hearing aid stuff would be there
sent from my Evo LTE, usually.
Click to expand...
Click to collapse
LOL anytime......and no worries we all get stuck at some point.
I'm brand new to HTC devices so I'm unsure if the dialer is sense or if this is a ICS dialer were dealing with. (My old phone was a Droidx, so my exp is with blur and asop 2.3 from liberty).
Either way though i seem to have come across an interesting "bug" or at least unusual behavior.
I've noticed on almost every other call, weather it's incoming or outgoing, the MOMENT you dial/answer the screen goes dark. Now i can press the power button to wake it up again and it will stay on for exactly 5 seconds before going dark again. If i flip on speaker phone the screen will stay on, however the moment i turn off speaker phone it goes dark again.
Whats really annoying is if i go back to the home screen it still goes dark after 5 seconds but now when i wake it up it's at the lock screen. If i try to unlock it the moment i touch the screen it goes dark. No matter where i touch the screen the phone is now perma locked until the call is finished.
Now like i said this happens every other call so far in the 6 times I've tested this, which i thought was really odd. The other times the screen stays on and acts completely normal no matter what i do while a call is active. Fresh reboot makes no difference. I haven't done a factory reset yet as I'm trying avoid that.
What i have done so far is unlocked the bootloader, Flashed recovery, and the root from con247's thread in the dev section. I don't think that has anything to do with it though since i noticed the screen going black during a call before i started messing with bootloaders/recovery/root. I just didn't test it as well before doing those things cuz i didn't think anything of it.
Is anyone else seeing this behavior and does anyone have any suggestions?
Void4ever
void4ever said:
I'm brand new to HTC devices so I'm unsure if the dialer is sense or if this is a ICS dialer were dealing with. (My old phone was a Droidx, so my exp is with blur and asop 2.3 from liberty).
Either way though i seem to have come across an interesting "bug" or at least unusual behavior.
I've noticed on almost every other call, weather it's incoming or outgoing, the MOMENT you dial/answer the screen goes dark. Now i can press the power button to wake it up again and it will stay on for exactly 5 seconds before going dark again. If i flip on speaker phone the screen will stay on, however the moment i turn off speaker phone it goes dark again.
Whats really annoying is if i go back to the home screen it still goes dark after 5 seconds but now when i wake it up it's at the lock screen. If i try to unlock it the moment i touch the screen it goes dark. No matter where i touch the screen the phone is now perma locked until the call is finished.
Now like i said this happens every other call so far in the 6 times I've tested this, which i thought was really odd. The other times the screen stays on and acts completely normal no matter what i do while a call is active. Fresh reboot makes no difference. I haven't done a factory reset yet as I'm trying avoid that.
What i have done so far is unlocked the bootloader, Flashed recovery, and the root from con247's thread in the dev section. I don't think that has anything to do with it though since i noticed the screen going black during a call before i started messing with bootloaders/recovery/root. I just didn't test it as well before doing those things cuz i didn't think anything of it.
Is anyone else seeing this behavior and does anyone have any suggestions?
Void4ever
Click to expand...
Click to collapse
Sounds like the proximity sensor is going wonky. You might try a factory reset and without installing anything else see if you get the same issue. Also, make sure that any programs you have installed are not affecting it for some reason.
blazingwolf said:
Sounds like the proximity sensor is going wonky. You might try a factory reset and without installing anything else see if you get the same issue. Also, make sure that any programs you have installed are not affecting it for some reason.
Click to expand...
Click to collapse
Just factory reset it, skipped setup completely and started making calls, same issue. You maybe right about the sensor though. The first call acted up like i explained. The second call the screen was staying on like i expected, but once i switched speaker phone off and then back on the screen shut off and started acting like call one again.
I just got this phone 6 hours ago i wonder how hard it will be to convince verizon there's a hardware fault. I guess i'd better unroot it and remove recovery so i can call in the morning.
Void4ever
I just wanted to make sure i understand this before i do it.
To remove the root i need to install the RUU for the phone, which i found at http://themikmik.com/showthread.php?13550-Asian-Shooter-goes-ICS-and-a-VZW-Fireball-RUU (second link i assume).
I haven't downloaded it yet, but it's an exe. Will it flash the phone via USB, or does it just extract something i can use recovery to flash with?
Once i get the root removed i just need to flash back the original recovery and i should be good to go right?
Void4ever
void4ever said:
I just wanted to make sure i understand this before i do it.
To remove the root i need to install the RUU for the phone, which i found at http://themikmik.com/showthread.php?13550-Asian-Shooter-goes-ICS-and-a-VZW-Fireball-RUU (second link i assume).
I haven't downloaded it yet, but it's an exe. Will it flash the phone via USB, or does it just extract something i can use recovery to flash with?
Once i get the root removed i just need to flash back the original recovery and i should be good to go right?
Void4ever
Click to expand...
Click to collapse
There are directions in the RUU that will explain all of the steps. You will connect your phone with the USB cable.
It shouldn't be to hard to convince them. Just show them the steps you did to reproduce the issue. Good luck.
On the phone right now and the guy is setting up overnight sat delivery to my house. We are a fairly large business account so i'm glad they are going that extra mile.
Just to note I've noticed the sensor doesn't shut off after a call is complete. In fact it stayed on last night for around 6 hours before finally turning off. I did another test this morning and once again the sensor is stuck on, so good call. Thanks so much for your help, i never would have thought sensor, it seemed like a software issue to me!
Void4ever
void4ever said:
On the phone right now and the guy is setting up overnight sat delivery to my house. We are a fairly large business account so i'm glad they are going that extra mile.
Just to note I've noticed the sensor doesn't shut off after a call is complete. In fact it stayed on last night for around 6 hours before finally turning off. I did another test this morning and once again the sensor is stuck on, so good call. Thanks so much for your help, i never would have thought sensor, it seemed like a software issue to me!
Void4ever
Click to expand...
Click to collapse
No problem. Glad you got a new one coming.
replacement came today and it works like a dream now, got custom recovery and root going! It was def a bad prox sensor on the other one. Thanks again for your help wolf!
Void4ever
Good to hear man. Enjoy that puppy.
void4ever said:
replacement came today and it works like a dream now, got custom recovery and root going! It was def a bad prox sensor on the other one. Thanks again for your help wolf!
Void4ever
Click to expand...
Click to collapse
Awesome.
Sent from my ADR6410LVW using Tapatalk 2