Overall i am pleased with the update, but i believe i uncovered an issue that others are expriencing as well.
When i have a second line calling me the screen does not wake up allowing me to switch to the second call. In the past, when a second call comes in the proximity sensor would wake the screen and allow me to take or reject the call. Now i cant even see who is calling. Since i use the phone for business, this is a big, big issue. It still works but the screen only wakes up after like the third ring, whereas before it would wake up immediately Anyone else experience this? I tried this on my buddies Vibrant and its the same thing.
So the question to you guys is how do i get the old dialer app back which i believe controls call waiting. Does anyone else know a way around this annoying issue?
Is there something stopping you from pressing the power button to turn the screen on when you hear the call waiting beep?
The prox sensor is not perfect.
-bZj
_____
-sent from my Samsung Vibrant via XDApp
down8 said:
The prox sensor is not perfect.
Click to expand...
Click to collapse
Obviously, if it was perfect this thread wouldn't exist.
nermie said:
Obviously, if it was perfect this thread wouldn't exist.
Click to expand...
Click to collapse
Thank u. I tried the power button, but unfortunately it does not wake the screen.
Thread moved to Q&A.
bump - me too!
pressing the power button results in a lagged response. that is: call waiting call comes in, screen is black. press the button screen stays black. 5-6 seconds pass and then the screen comes on finally and shuts right back off. whereas NOT pressing the power button, the screen stays black for 5-6 seconds and then comes on and stays on.
I am experiencing this problem too. Just started since coming from stock to JI6.
bump... me too, but this happened on a friend of mine's vibrant who was using stock JI6 from the ota, no root nothing and every incoming call if she is on a call has the same behavior.
This issue has gotten so annoying for me, I have unfortunately decided to sell the phone. I loved it, but is failed in the function I use it most as, a phone. Got a g2. Not as glamorous as the vibrant, but it works as a phone.
Related
So, I have a rooted GB updated DX2 now, and I am having problems hanging up the phone, whether I called or they called me. The screen goes black like usual and when the conversation is over, I go to hang up the phone and can not get off the black screen. I've tried all the buttons and i get no where and the phone is still in communication with the other person. I have to w8 like 30 seconds after the other person has hung up before the phone will pop back up and say call ended. Is anyone else having this issue and is there a way to fix this?
Thanks in advanced
I have not run into this problem but something you may want to try, at least until someone has a better solution, go to Settings > Accessibility and enable Power button ends call. This will allow you to press the power button to end a call instead of waiting for 30 or so seconds for the sensor to catch up.
I solved it at wrk.today after having gb wen p3droid released it. It was my phone case. I got the trident kraken and I think the uv layer protector blocks the sensor from motion capture. Anyway, I cut out the plastic where the eye is and it works now. Thanks for the advice.
Sent from my amazazing Droid X2
Hi everyone,
funny thing happened to my Mozart. Whenever I make a call the screen shuts off like it should, but it doesn't turn on again when i remove it from my ear until the call has ended.
Which works fine if the other person hangs up, but it means I can't hang up. Whenever I reach a voicemail i have to take out the battery to hang up!
First i thought it was a rom issue, i had just gotten my hands on the mango beta when i first noticed it. I thought it might be buggy.
But the problem remains after hard reset and flashing with a different rom (pre-nodo & nodo).
I found out that the sensor still works. The screen is reactivated when i shine a bright light (halogen spot or so) onto it - but only for as long as the source shines onto the sensor, else the screen shuts off again. wierdly enough, direct sunlight doesnt seem to be enough to trigger it anymore.
since i upgraded my phone with a 32GB microSD I guess I'm not eligible for warranty, huh? but im pretty sure it happen long after and i didn't accidently break something while opening the phone.
very weird... any ideas?
I had this problem on the weekend.
I removed the matt screenGUARD, and the problem disapeared.
Also you can reactivate the screen by pressing the on/off button...
thanks for your comments.
unfortunately, I don't use a screen protector and the standby-button doesn't work during a call
I have this problem also, with stock 7392 rom. The sensor seems to work when dialing, but stops a short time after a call is connected.
The power button works for me to turn the screen back on however...
Where is the proximity sensor ?
where on the device is the proximity sensor located?
I have been having difficulty with the screen not switching on during phonecalls and I have to remove battery to end outgoing calls. Pressing the power button doesn't help either. I don't have a screenguard to remove.
The problem started not long after, but not immediately after my daughter dropped the phone down the toilet. It took a few days for the phone to gently dry out and it worked again except for some residual water between the screen and the glass.
Richard Fantom said:
where on the device is the proximity sensor located?
Click to expand...
Click to collapse
The sensor is about 1 cm to the top and right of the htc logo. It's barely visible and it is dark violet. (Or something like that, I am not very good at naming colours.)
Anyway, I sometimes also experience problems with sensitivity with HTC Mozart, mostly during calls, especially when the proximity sensor has been activated. Sometimes the home button freezes after a call... It's a bit annoying.
So just recently, I noticed that whenever a call ends, the screen remains black and the proximity sensor is still on (red). I've tried pressing the unlock/lock button, but nothing happens. I know the call has ended because I hear the 'ring' that it makes. I've tried it with and without "The power key ends calls", no difference. I have not flashed anything different recently. The only solution I found was to hold down the power button until it restarts, but when someone calls, I have to repeat the process all over again. It was never like this until today. Does anyone know of a solution?
I'm currently on UnNamed 1.3.2 with Entropy's 1/2/12 DD
I'm currently having the same problem with the stock (rooted) ROM... Occasionally after a call, the next time I try to activate the screen, it just stays blank. Sometimes after a call, it's similar to what you described with the end button call staying red and the screen frozen. I have to hold down the on button for 5-10 seconds to reboot the phone. This phenomenon just started about a week ago. The phone has been working flawlessly until then.
I thought that maybe it's some app update gone astray.
knimrod said:
I'm currently having the same problem with the stock (rooted) ROM... Occasionally after a call, the next time I try to activate the screen, it just stays blank. Sometimes after a call, it's similar to what you described with the end button call staying red and the screen frozen. I have to hold down the on button for 5-10 seconds to reboot the phone. This phenomenon just started about a week ago. The phone has been working flawlessly until then.
I thought that maybe it's some app update gone astray.
Click to expand...
Click to collapse
I forgot to mention that I found the culprit, it was my screen protector. I had ordered one of SGP's screen protectors since a lot of people were saying it was good, but when it finally arrived, I noticed that it was very sticky and had covered over the proximity sensor. Over the coming days, the screen protector attracted dust due to it's stickiness when I put it in my pocket. You can probably guess what happened, dust was covered over the area of the proximity sensor, causing it to malfunction like that, but after I took it off, all was well, and now I'm rocking my phone half naked - case but no screen protector. I think I'll leave it like that from now on, gorilla glass feels and looks awesome
Hello,
A few days ago I unfortunately dropped my HTC Legend at a music festival and the screen cracked quite badly. Other than that it seems fine, everything works and screen is intact, just glass cover cracked.. I'm writing this from the phone now.
However I've noticed one problem since then.. often when making or receiving a call, the screen will not come back on. It turns off like it normally does when it gets in proximity while in call, then just never turns back on again! It's still "alive", I can still be in the call while it's like this.
When the call's over (can feel vibrate and beep when hang up), the notification light will flash if I have any, like normal.
I press power button, hold it, home button, back button, hold back... Nothing. Have to battery pull and restart! It doesn't happen with 100% of calls, but most.
I haven't noticed anything else wrong.
It seems like once the phone app (not contacts/dialer) is launched after I chose someone to call, the screen turns off and there you go. Call still rings and goes through, but device becomes otherwise unresponsive and I think screen turns off before it should
I'm rooted and s-off with cyanogen 7.2 rc
I've tried wiping and flashing a newer cyanogen 7.2 nightly, same thing.
I don't think it'd be device specific so I'm posting here...
Anyone know what could have happened and how I can fix it??
Cheers!
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Sounds like your proximity sensor is completely broken. It's causing it to act like there is something blocking it which turns the display off. After all you did say you dropped it. Maybe the sensor just came out of place?
I have had my Verizon Note 2 for about a month now, and about 2 days ago i read that the processor has Vulnerabilities and mailware problems samusing is trying to fix but about a week ago i went to use my quick glance and my direct call and it wasnt working and when someone calls me i put it up to my ear the screen goes black as it should but then its stuck at the black screen i hit all the buttons cant get to the phone call if i wanted to put it on speaker or even just check a txt message i cant do anything until that person hangs up. The only way i am able to check my txt messages and stuff while on the phone is if i dont put it up to my ear.. so i restarted phone as we all would assume this would fix it well it didnt, so then i did a Factory reset thinking that would just put it back to complete stock and fix it well turns out that didnt work. My phone has never been rooted or anything and never will be. Im running Android 4.1.1 If anyone has any idea how i can fix this it would be gladly appreciated i love the motion features. Also i did the Gyroscope calibration and it didn't make any difference, my proximity sensor is on and glowing red just doesnt work like i said.
Thanks, Stephen
Hawksfan88 said:
I have had my Verizon Note 2 for about a month now, and about 2 days ago i read that the processor has Vulnerabilities and mailware problems samusing is trying to fix but about a week ago i went to use my quick glance and my direct call and it wasnt working and when someone calls me i put it up to my ear the screen goes black as it should but then its stuck at the black screen i hit all the buttons cant get to the phone call if i wanted to put it on speaker or even just check a txt message i cant do anything until that person hangs up. The only way i am able to check my txt messages and stuff while on the phone is if i dont put it up to my ear.. so i restarted phone as we all would assume this would fix it well it didnt, so then i did a Factory reset thinking that would just put it back to complete stock and fix it well turns out that didnt work. My phone has never been rooted or anything and never will be. Im running Android 4.1.1 If anyone has any idea how i can fix this it would be gladly appreciated i love the motion features. Also i did the Gyroscope calibration and it didn't make any difference, my proximity sensor is on and glowing red just doesnt work like i said.
Thanks, Stephen
Click to expand...
Click to collapse
That exploit that you are referring to has nothing to do with your issue... And the proximity sensor does not light up as that is the LED notification light. I have this issue from time to time too and it's just that the sensor is not doing it's job properly but if you just simply hit the home button or power button real quick the screen will turn on. Other than that you may want to check some of your settings... Turn off your "motion" settings and see if that takes care of your issue then find out which one is causing the problem...
The quick glance used to work without any problems at all and i liked that, then all of a sudden one day it just decides not to work and it hasn't worked in a week now, i turned my motion off and when im in a phone call it still locked up at the phone screen i cant do anything until they hang up ive gone through the settings multiple times and nothing, i think imma go to verizon today and ***** about it
Hawksfan88 said:
The quick glance used to work without any problems at all and i liked that, then all of a sudden one day it just decides not to work and it hasn't worked in a week now, i turned my motion off and when im in a phone call it still locked up at the phone screen i cant do anything until they hang up ive gone through the settings multiple times and nothing, i think imma go to verizon today and ***** about it
Click to expand...
Click to collapse
Ya something does not sound right... Do you have a screen protector on your Note 2 that is covering the sensors?
shojus said:
Ya something does not sound right... Do you have a screen protector on your Note 2 that is covering the sensors?
Click to expand...
Click to collapse
No screen protector or anything no case either, my girlfriend yanked the battery while it was on one day idk if that has anything to do with it or not cause after that happened seemed like it didn't work
shojus said:
That exploit that you are referring to has nothing to do with your issue... And the proximity sensor does not light up as that is the LED notification light. I have this issue from time to time too and it's just that the sensor is not doing it's job properly but if you just simply hit the home button or power button real quick the screen will turn on. Other than that you may want to check some of your settings... Turn off your "motion" settings and see if that takes care of your issue then find out which one is causing the problem...
Click to expand...
Click to collapse
actually the proximity sensor DOES light up, it's a very faint red light and it's the left one of the two little holes to the _right_ of the phone speaker, the notification LED is on the left of the phone speaker. This light turns on when in a phone call to indicate that the sensor has been activated.