I am trying to install the jellybam 3.0.0 rom and am having no luck. I tried just following inst and that didn't work after about 45 sec the android guy fell over and a red triangle popped up. Then I saw you might have to change to siyah 4.3.3 so I downloaded the zip without micswap and flashed it after the Jellybam rom. Still no luck the rom loaded, but when I rebooted the ics symbol showed up then phone turned of. Can someone tell me how to get this to work. I have the ported version and works fine.
Any help would be greatly appreciated. Also thanks for all you guys and gals do your awsome.
Can't install Jellybam???
fountain79 said:
I am trying to install the jellybam 3.0.0 rom and am having no luck. I tried just following inst and that didn't work after about 45 sec the android guy fell over and a red triangle popped up. Then I saw you might have to change to siyah 4.3.3 so I downloaded the zip without micswap and flashed it after the Jellybam rom. Still no luck the rom loaded, but when I rebooted the ics symbol showed up then phone turned of. Can someone tell me how to get this to work. I have the ported version and works fine.
Any help would be greatly appreciated. Also thanks for all you guys and gals do your awsome.
Click to expand...
Click to collapse
I had the same error....i guess you must be getting a "status 7" error while flashing jellybam.....
I used to run SHOstock3 rom v1.4, and i got the same error while flashing jellybam, so i follwed the method given by one of the experts...
1. I did a factory reset, and flashed jellybam, after which i got a status 7 error...
2. I restored the rom via CWM
3. Flashed siyah v3.4.2 with micswap..
4. since that was siyah ics, i could not use my phone, but i was able to flash jellybam over it.....
5. Im running Jellybam without any bugs...
So basically, you can do a full wipe, flash siyah, and then flash J'bam......else use an older version of siyah like i did....Hope u r problem is solved....
Thanks
Aayush_13 said:
I had the same error....i guess you must be getting a "status 7" error while flashing jellybam.....
I used to run SHOstock3 rom v1.4, and i got the same error while flashing jellybam, so i follwed the method given by one of the experts...
1. I did a factory reset, and flashed jellybam, after which i got a status 7 error...
2. I restored the rom via CWM
3. Flashed siyah v3.4.2 with micswap..
4. since that was siyah ics, i could not use my phone, but i was able to flash jellybam over it.....
5. Im running Jellybam without any bugs...
So basically, you can do a full wipe, flash siyah, and then flash J'bam......else use an older version of siyah like i did....Hope u r problem is solved....
Click to expand...
Click to collapse
Trying now...
Its working
Aayush_13 said:
I had the same error....i guess you must be getting a "status 7" error while flashing jellybam.....
I used to run SHOstock3 rom v1.4, and i got the same error while flashing jellybam, so i follwed the method given by one of the experts...
1. I did a factory reset, and flashed jellybam, after which i got a status 7 error...
2. I restored the rom via CWM
3. Flashed siyah v3.4.2 with micswap..
4. since that was siyah ics, i could not use my phone, but i was able to flash jellybam over it.....
5. Im running Jellybam without any bugs...
So basically, you can do a full wipe, flash siyah, and then flash J'bam......else use an older version of siyah like i did....Hope u r problem is solved....
Click to expand...
Click to collapse
Thanks again for sharing the info very helpful.
did that work
fountain79 said:
Thanks again for sharing the info very helpful.
Click to expand...
Click to collapse
Hi All
Did the method of installing Siyah Kernel and then flashing JellyBam work to resolve "error code 7" issue ??
Related
so, I've had my SG2 for like a month now, rooted and all, but the problem is , i can't flash any other ROMs(but stock ROMs) or kernels (except for CF root,stock and siyah kernels ) on it via CMW... each time i tried to flash anything, i end up stuck at "galaxy s2 GT-I9100" boot-up logo.... I've tried flashing CM7 then i got the boot-loop ( even with double flash, or triple didn't work for me) and i can't get into CWM when i got the boot-loop....
someone please help me.. i read alotta threads and none of them got similar issue like mine...
i guess its true what they say : every galaxy s2 is different from the rest.
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
InFa_ReD_1 said:
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
Click to expand...
Click to collapse
If you already have root then you won't loose it.
geko95gek said:
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
Click to expand...
Click to collapse
I used to use VR 3.0 but could only work with stock kernel or cf root kernel has never booted with the ROM's kernel..
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
My phone came with CM7, but i flashed it with rooted stock coz i wanted to have a feel of it... but now i'm done with it but i can't get any roms to work... so frustrating.
i literally have tried flashing ALL Roms (ligtnung, gingerbread,vr, cm7), during the 1st few days that i got my phone it worked with VR 2.5 and 3.0, even MIUI.. but after i flashed with some Asian stock ROM via odin... nothing would work through cmw anymore...
i seriously don't know what i did wrong...
btw, right now im using basebad ver: I9100XXXKI4, kernel: 2.6.35.7-siyah [email protected]#20, build number GINGERBREAD.ZSKI3.
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuse to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
tomascunill said:
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
Click to expand...
Click to collapse
well, i'm gonna try that and see if it works, am also goin' try to see if downgrading to 2.3.4 or something would work too...
but please if you got any more ideas, just keep it coming..
thanks
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
thanks for everyone for helping, and i hope this can help others on the same boat as me..
Hello,
Today I thought, let's try out ICS! Found this guide (can't post outer links, search for "android advices ICS Android 4.0.1 XXKP2 " in google), and used it to update my phone to ICS.
Well, after trying out the rom, I would like to go back to my MIUI backup, rooted it, installed clockworkmod recovery and booted up the recovery mode. The recovery said "can't mount /cache/*" for all cache folders. So I couldn't restore my backup.
After reading some stuff I installed a recovery through Odin. Worked like a charm, no alerts of mounting failures. Restored my backup, but when it was rebooting it gave an "Kernel Panic - Upload mode" screen. Couldn't do anything, so put the battery out and back in.
After this I installed ICS again with the same steps as in the guide. This worked! Rooted and installed recovery again, no problems so far. Tried a fresh install of MIUI but with the same problems.
So I can flash ICS but I can't flash any other rom, what can be the problem?
Every help and tips are welcome!
Thanks in advance!
Same thing happened to me last nite, kernel panic, and im panic too. This happened after flashing that cm9 coz i just wanna try and see how cm9 look like and i know im not going to stick with it, just for trying. Now im back to miui.
What i did is i flashed back to stock rom, root, then flash miui, or any rom that you want. Very simple.
Rom : MIUI ICS XGT 'EXTENDED'
Kernel : Xcell-69X
Modem : XXKP8
Sent from Galaxy SII
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Thats not true my friend, you flash any custom rom. Nothing need to worry about.
Rom : samsung stock firmware
Kernel : stock kernel
Modem : stock modem
Sent from Galaxy SII
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Did you make sure to flash back the old GB bootloaders? Restoring a backup wont flash them back.
I am using CM9 on my SGS2. I have been flashing the nightlies for months. But I wanted to give CM7.2 a shot so I tried flashing that. But it gave me a boot loop. So I reloaded CM9 using Odin, re-downloaded CM7.2, checked the md5 and tried flashing again... same result. So I tried a couple of other GB ROMs and I got the same result. So I thought maybe the problem is CWM and I tried flashing a stock Samsung GB firmware but I got a boot loop again... but I have successfully flashed an ICS firmware, CM9 and MIUI4 since then. I can only use ICS ROMs.
So the problem must be my phone. Can anybody suggest what the problem might be or suggest a way to fix this? My phone works perfectly otherwise.
are you trying these with full wipe before and after the installation
+1 @ zacq
simple answer format system partition and will not bootloop for sure
deleted
ZACQ8 said:
are you trying these with full wipe before and after the installation
Click to expand...
Click to collapse
Yes. When I wipe afterwards I get kernel panic upload mode.
Hey folks,
I'm desperately trying to get a CustomRom working on my GP4.
I'm relatively new to the device, but not to CustomRom's, since I was using a Motorola Defy untill last summer, running CM7.2 and CM9, MIUI and a couple of others.
So here's my issue:
I flashed the Terrasilent Kernel in order to get CWM so I could flash the .zip's from there, as some weren't available for odin.
The kernel works fine, but as soon as I try to flash any CustomRom (I tried CM9, CM10.2, Hydrogen and the PACMAN Rom), I'm just getting infinite bootloops.
I also tried flashing with SD card removed, SD card back in....doesn't help. No matter whether it's done with odin or CWM.
Mostly I get stuck at the Samsung screen , the PACMAN insert coin or the Terrasilent phonebooth .
Does anyone have suggestions how I could make it work?
Cheers!
basti_b24 said:
Hey folks,
I'm desperately trying to get a CustomRom working on my GP4.
I'm relatively new to the device, but not to CustomRom's, since I was using a Motorola Defy untill last summer, running CM7.2 and CM9, MIUI and a couple of others.
So here's my issue:
I flashed the Terrasilent Kernel in order to get CWM so I could flash the .zip's from there, as some weren't available for odin.
The kernel works fine, but as soon as I try to flash any CustomRom (I tried CM9, CM10.2, Hydrogen and the PACMAN Rom), I'm just getting infinite bootloops.
I also tried flashing with SD card removed, SD card back in....doesn't help. No matter whether it's done with odin or CWM.
Mostly I get stuck at the Samsung screen , the PACMAN insert coin or the Terrasilent phonebooth .
Does anyone have suggestions how I could make it work?
Cheers!
Click to expand...
Click to collapse
Did you wipe the data/cache? Also, I believe you're supposed to flash then ROM first, THEN you flash the kernel.
TheKryptonite said:
Did you wipe the data/cache? Also, I believe you're supposed to flash then ROM first, THEN you flash the kernel.
Click to expand...
Click to collapse
Forgot to mention that: I tried various ways: first wipe data/cache, then flash ROM; first flash ROM, then wipe cache; wipe cache, flash ROM, wipe again...
In order to get CWM recovery and being able to flash a zip I flashed the Kernel first. For CM9 I followed this http://forum.xda-developers.com/showthread.php?t=2213152
As I couldn't flash any of the pre-flash zip from stock, I thought it's necessary to flash a kernel including CWM first. It was done in the same way in some youtube tutorial I watched, where the guy already had the terrasilent kernel on his device.
For odin, I will check if it works with first flashin the ROM and afterwards the kernel.
Cheers for your fast reply!
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884
I've just tried this, didn't work also. I even had to flash the recovery and the kernel again after trying to flash the file in the link, because the phone wouldn't boot normal or in recovery mode.
mcb25 said:
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
Click to expand...
Click to collapse
Try using philz recovery on your phone. It should flash most ROMs fine.
gsstudios
gsstudios said:
Try using philz recovery on your phone. It should flash most ROMs fine.
Click to expand...
Click to collapse
I just did, I still get the Status 7 error. I tried to flash the cm 12.1 and the cm 13.0 nightly rom. I also tried deleting the assert command in the updater-script file but it still won't work. There was no Status 7 error but it still said "Installation aborted".
Does anyone else got an idea how to fix this?
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
mcb25 said:
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
Click to expand...
Click to collapse
Apologies, I only just noticed you have a i9100g, not a i9100. You can't just flash i9100 kernels as they simply won't work!
You can follow the guide in the CM13 OP here:
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-13-0-t3381511
gsstudios