Hey there,
Here is a list of what I have before I get started.
Samsung Galaxy Tab 10.1 Wifi (P7510)
Android Version - 3.2
Kernel Version - [email protected]#1
Build Number - INFAMOUS TAB 0.1 P7510UEKMM
Basically I have no access to my tablets internal SD card via my PC (Windows 7 and KIES)
I bought this tablet from a friend who rooted and flashed with the INFAMOUS mod.
I have searched all over the web for an answer and cant find something for this case specifically.
Each time I plug in my tab, my PC tells me that the Hardware ID is missing.
I can see the tablet in my Devices and Printers (displayed as SAMSUNG_android) as well as in my Device Manager. In device manager it says the drivers are up to date and functioning.
What have I tried?
USB Debugging (On and Off)
Clearing cache via recovery mode
Updating drivers via W7 and KIES via Samsung
I have tried following a few threads on installing the KIES software without internet connectivity. However I would rather not use the KIES Software anyway as it is kind of garbage.
I am looking to have access to the internal SD card so I can flash a new Rom on the Tab, however I would first like to even just have access to the file transferring.
Can anyone point me in the direction of help and me being able to enjoy this tablet?
I hope I have provided enough information. I am a pretty techy person and I understand how to do all of this but it seems like I am missing something really big.
Something to take note of, whenever the tab is plugged in (PC or Wall) there is a red x over the battery symbol and the tab charges very slowly.
Cheers
B
Snugglebutt said:
Basically I have no access to my tablets internal SD card via my PC (Windows 7 and KIES)
...
I am looking to have access to the internal SD card so I can flash a new Rom on the Tab, however I would first like to even just have access to the file transferring.
Click to expand...
Click to collapse
The Galaxy Tab doesn't expose the internal "sdcard" as a device that you can mount on your PC. If you enable it, it shows up as a MTD device.
The sdcard partition is formatted using a Linux native filesystem, not FAT, so Windows can't recognize it.
I use adb to push files onto the sdcard. ADB comes with the android SDK.
k1mu said:
The Galaxy Tab doesn't expose the internal "sdcard" as a device that you can mount on your PC. If you enable it, it shows up as a MTD device.
The sdcard partition is formatted using a Linux native filesystem, not FAT, so Windows can't recognize it.
I use adb to push files onto the sdcard. ADB comes with the android SDK.
Click to expand...
Click to collapse
As stated, make sure you have your tablet in MTP, and if so, make sure to update your drivers.
Settings > Storage > Additional Settings (top right) > MTP
To build on the above, if you have uninstalled Kies but also the Samsung USB drivers, you will be unable to connect the tab. Reinstall (or maybe uninstall and reinstall if you still have them) the drivers. A lot of the times that is the issue.
Go to Settings>Storage>Options/Info (The one on the upper right)>MTP(Check this one)
hope this help
FIXED
k1mu said:
The Galaxy Tab doesn't expose the internal "sdcard" as a device that you can mount on your PC. If you enable it, it shows up as a MTD device.
The sdcard partition is formatted using a Linux native filesystem, not FAT, so Windows can't recognize it.
I use adb to push files onto the sdcard. ADB comes with the android SDK.
Click to expand...
Click to collapse
To build on the above, if you have uninstalled Kies but also the Samsung USB drivers, you will be unable to connect the tab. Reinstall (or maybe uninstall and reinstall if you still have them) the drivers. A lot of the times that is the issue.
Click to expand...
Click to collapse
Ahhh ha! As soon as I uninstalled the driver that windows found and used the Google Driver that came along with the Android SDK, the tablet was recognized. Alas, I can finally use this tablet.
In the end it was as simple as a driver error, I spent a very long time searching last night and now I just feel silly.
The tablet still shows the red X over the battery symbol, whether I have MTP with USB Debugging on or off. I guess this can be avoided with certain ROMS. Anybody know of a ROM that avoids this?
Thank you all for your immediate responses!
B
Tid bit of info
H. Ess said:
As stated, make sure you have your tablet in MTP, and if so, make sure to update your drivers.
Settings > Storage > Additional Settings (top right) > MTP
Click to expand...
Click to collapse
Go to Settings>Storage>Options/Info (The one on the upper right)>MTP(Check this one)
Click to expand...
Click to collapse
By the way you two, there is no option in 3.2 for this.
In 3.2 its Applications/Development/USB Debugging
In storage there is no option to choose MTP, it seems that it always has been enabled and I cant find it anywhere in the settings to change it.
Thanks for the input though
Snugglebutt said:
By the way you two, there is no option in 3.2 for this.
In 3.2 its Applications/Development/USB Debugging
In storage there is no option to choose MTP, it seems that it always has been enabled and I cant find it anywhere in the settings to change it.
Thanks for the input though
Click to expand...
Click to collapse
For honeycomb and many others, debugging is always there. Under the storage option, you have an Additional Settings button usually and it should be present in there. I was always running3.2 until like a couple days ago so surprised its not there. Oh well problem solved lol
I'm having a similar problem with my tab not being recognised by my pc (win7 64) or in kies. It was originally an M380W (Korean) model, which I updated to a P7510. That all went fine, and the tablet works perfectly, except for the fact that my pc no longer sees it when it's plugged in. I tried uninstalling and reinstalling the drivers, but no dice. I'm going to see if adb works.
Related
I did an NVflash after struggling to load VEGaN 7 for a couple days figuring it was the partition issue that I have read about. Flash went off without a hitch - or so I thought.
I went to flash VEGaN 7 again, but my computer would not recognize connection via USB. Attempted to login to clockwork mod but instead I get message - "booting recovery image".
Thinking a factory reset might somehow free up my USB connection I did a factory reset - now I'm stuck in a bootloop.
So, to review--
I can't connect to PC via USB, Access CWM, or get past the bootloop.
BTW - I noticed while looking for options to connect to USB that it appeared my Internal and external SD cards switched locations after the NV flash. External, although not accessible was 12.9 gig and my internal showed slightly less than 1 gig.
Anyway, is there any hope for my G tab - I have never been so frustrated over such a simple process in my entire life.
sorry looked for a way to move this post to the correct location...
gunnervike said:
I did an NVflash after struggling to load VEGaN 7 for a couple days figuring it was the partition issue that I have read about. Flash went off without a hitch - or so I thought.
I went to flash VEGaN 7 again, but my computer would not recognize connection via USB. Attempted to login to clockwork mod but instead I get message - "booting recovery image".
Thinking a factory reset might somehow free up my USB connection I did a factory reset - now I'm stuck in a bootloop.
So, to review--
I can't connect to PC via USB, Access CWM, or get past the bootloop.
BTW - I noticed while looking for options to connect to USB that it appeared my Internal and external SD cards switched locations after the NV flash. External, although not accessible was 12.9 gig and my internal showed slightly less than 1 gig.
Anyway, is there any hope for my G tab - I have never been so frustrated over such a simple process in my entire life.
Click to expand...
Click to collapse
When you NVFlashed, did you use the version with or without CWM. If you did the version without CWM then that would explain no CWM.
When you say you can't connect to PC are you talking about APX mode (NVflash)?
Go here http://viewsonic-gtablet-for-dummies.webs.com/ and follow the instructions for CODE RED step by step. Make sure download everything via the links on the dummies site to make sure you get the right stuff.
Al
No I used the version with CWM, which is why I was suprised to see the "booting recovery image" and then it just continued to boot. I tried both APX via USB and a typical USB connection after loading --where PC gave error "device not identified".
gunnervike said:
No I used the version with CWM, which is why I was suprised to see the "booting recovery image" and then it just continued to boot. I tried both APX via USB and a typical USB connection after loading --where PC gave error "device not identified".
Click to expand...
Click to collapse
So, just to verify, you hold Vol(-) and press/hold Power, 3 birds appear & screen goes black...that is APX mode. Connect usb cable to PC & what does the PC say?
USB device not recognized -
Still having that problem with USB device not recognized.
However, I have gone to ...for dummies site and reflashed device using the "flash USB driver" to temorarily gain access with USB connection. With NVFlash I Am back to having clockworkMod and working GTab with original software 1.1
Again going to flash rom - but Upon connecting USB i get the message "USB device not recognized" - I have attmpted to mount USB through CWM, but still getting that same error.
gunnervike said:
Still having that problem with USB device not recognized.
However, I have gone to ...for dummies site and reflashed device using the "flash USB driver" to temorarily gain access with USB connection. With NVFlash I Am back to having clockworkMod and working GTab with original software 1.1
Again going to flash rom - but Upon connecting USB i get the message "USB device not recognized" - I have attmpted to mount USB through CWM, but still getting that same error.
Click to expand...
Click to collapse
If your tab boots, you don't have to use CWM/mount & storage to transfer your rom to the internal sd. Put your external in your PC, copy the rom to it, move back to the tab & copy to your internal. There are also other ways to transfer it but we can talk about that later if you like.
If that works you can still flash your rom & then we can work on getting the usb up.
So, the usb not recognized is when you try to connect after your tab is either all booted up or in CWM mount & storage (and not when you are in APX mode doing NVFlash)?
If you look in device manager what does it show?
Try connecting your tab to a differet PC & see it detects it correctly?
If it works on another PC, you may want to tryto use USBDview http://www.nirsoft.net/utils/usb_devices_view.html to look at the USB dvices that are connected or have been connected to your PC. You can find the gTab devices in the list & then use it's command line options (see instructions included with it) to remove(uninstall) them from the PC. Then you can reconnect to see if it will detect & install the driver correctly.
Can't use external load on pc to transfer rom. No card access.
USB did work in apx mode following instructions in code red. I thought of usin another pc and duplicated the failed results there.
Device manager showed yellow exclamation mark and would'n't install any driver I pointed it to (both computers) Unknown USB device.
Btw I want to thank you for trying to help me out on this. You people who lend your knowledge are commendable.
gunnervike said:
Can't use external load on pc to transfer rom. No card access.
USB did work in apx mode following instructions in code red. I thought of usin another pc and duplicated the failed results there.
Device manager showed yellow exclamation mark and would'n't install any driver I pointed it to (both computers) Unknown USB device.
Click to expand...
Click to collapse
OK, try this. We are going to use Mobisynapse to wirelessly transfer files to & from your PC to the tab.
Download mobisynapse from my dropbox http://dl.dropbox.com/u/36150173/Mobisynapse.exe & install on your PC.
From your gTab, download Mobisynapse system tool from my dropbox to your tab & install http://dl.dropbox.com/u/36150173/com.mobisystems.office_registered-1.apk.
Start the app on the tab, click More & select Connect to PC to switch it to ON.
Start the Mobisynapse on your PC, it shoud see your tab, once it sees it click connect.
From there, go to the Files icon & you should see an Explorer type screen. PC on the left, tablet on the right. You can transfer files in either direction. Transfer your Rom files or whatever you want.
Let me know when you have downloaded the apps from my dropbox so I can remove them.
Al
I downloaded them and installed, on tab it shows up as officesuite. When I run it "more" is not an option. On pc it simply says (can not connect to android device) under "choose devices". I did turn on USB debugging on tab.
gunnervike said:
I downloaded them and installed, on tab it shows up as officesuite. When I run it "more" is not an option. On pc it simply says (can not connect to android device) under "choose devices". I did turn on USB debugging on tab.
Click to expand...
Click to collapse
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
aabbondanza said:
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
Click to expand...
Click to collapse
Here's the correct on for the tab app:
http://dl.dropbox.com/u/36150173/Mobisynapse%20system%20tool_1.3.apk
aabbondanza said:
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
Click to expand...
Click to collapse
Ok, there we go. Gimme a few
Do I need to create a "roms" folder, and is it supposed to be the zip folder or the files within the zip folder?
gunnervike said:
Do I need to create a "roms" folder, and is it supposed to be the zip folder or the files within the zip folder?
Click to expand...
Click to collapse
It's easier that way, that way you can easily differntiate it from other files/folders. If you create the folder, then put the zipped rom inside the folder.
I turned connect to pc on. Running mobisynapse on pc it sees the tab just fine. I click connect and it pulls up info about tab, BUT when I go to files tab --- right side of screen is greyed out. It won't transfer files.
gunnervike said:
I turned connect to pc on. Running mobisynapse on pc it sees the tab just fine. I click connect and it pulls up info about tab, BUT when I go to files tab --- right side of screen is greyed out. It won't transfer files.
Click to expand...
Click to collapse
Third icon from the left...looks like a little file cabinet.
lol, yeah 3rd from left...
It seems to connect just fine, but under the file tab I can only see files from the PC on the left - the right side doesn't show any files and all buttons are greyed out. Again, under the home tab I have access to the GTab just fine. I can see apps, contacts, etc. but under file tab - no files on right side and buttons are not accessable.
So do you see the left (PC side)? Is the right side populated at all & what is in the drop down folder box (should be /sdcard)!
My device isn't recognized by my computer. Is the tablet supposed to prompt me to enable USB storage when it's plugged into a computer?
Nope...For me it just shows up in my computer..a new window doesnt pop up like it regularly does for new items inserted.
win xp didn't worked for me either - win 7 worked without any problems
I guess I'm not clear. When I had a rooted NOOKcolor (replaced stock ROM with a Gingerbread one), on the device itself would be a prompt to enable USB storage when it was plugged into a computer. This would appear in the notification bar at the bottom. Once I clicked yes/ok on the device, only then would it appear on my computer as a storage device. This doesn't happen with the Sony. I'm using a Mac.
So, those with a computer that recognizes the device, are you prompted on the tablet to enable USB storage or does it simply appear on your computer as a storage device with no prompting? Again, I'm not referring to your computer prompting you to do anything. I don't have another Honeycomb tablet to answer my own question. Thanks.
Honeycomb doesn't support USB mass storage. It uses MTP instead so things may work
a bit different than you expect. If you're on a Mac you need to download the Android file transfer program from google.
Sent from my Sony Tablet S using Tapatalk
wallyworld17 said:
Honeycomb doesn't support USB mass storage. It uses MTP instead so things may work
a bit different than you expect. If you're on a Mac you need to download the Android file transfer program from google.
Sent from my Sony Tablet S using Tapatalk
Click to expand...
Click to collapse
Thanks so much for the quick reply! Now I can stop scratching my head in bewilderment. Now I recall reading about Android file transfer program. I think I downloaded it months ago.
Yep, just checked my Downloads folder. It's been sitting here, never installed.
Anyone else having a problem with tablet not showing up on computer after ICS. Updated the tablet with Allinone version 4 without any problem but now i need to shift some pictures onto the computer. When i plug in the tablet nothing happens on either the pc or the tablet. Ive used 2 different cables and used 2 different computers but nothing shows up. Debug is on. As far as im aware this has only happened after the ICS rooted update.
I thought that by transferring the pictures over to the sd card would at least sort that out but now i read and tried that external card is being read as "read only". So cant transfer the pictures to sd card and computer not recognising the tablet, now what?
Any advise?
D.
diddy64 said:
Anyone else having a problem with tablet not showing up on computer after ICS. Updated the tablet with Allinone version 4 without any problem but now i need to shift some pictures onto the computer. When i plug in the tablet nothing happens on either the pc or the tablet. Ive used 2 different cables and used 2 different computers but nothing shows up. Debug is on. As far as im aware this has only happened after the ICS rooted update. I thought that by transferring the pictures over to the sd card would at least sort that out but now i read and tried that external card is being read as "read only". So cant transfer the pictures to sd card and computer not recognising the tablet, now what?
Any advise?
D.
Click to expand...
Click to collapse
Your computer not recognizing your tablet sounds like an ADB driver problem, so you may have to reinstall the drivers. Condi's AIO Tweaks and Mods submenu items 12 and 11 will solve your problems with sdcard and sdcard2 write permissions and USB Mass Storage support so your computer can access your tablet's memory. Searching the forum about these problems will provide you with additional information on how to deal with them as they have been discussed several times.
Thanks for the reply. Its been so long since i initially setup the tablet. Correct me if I am wrong but when the tablet is connected to the computer the tablet should show up as sony s tablet, is that when the drivers need to be installed. Ive a shocking memory. Im starting to panic as ive documents that I have done in collage. Without the sd card transfering data to extenal in knackered.
So, if I plug the tablet in and NOTHING shows up either on tablet or pc, does that mean that the drivers need to be reinstalled?
diddy64 said:
So, if I plug the tablet in and NOTHING shows up either on tablet or pc, does that mean that the drivers need to be reinstalled?
Click to expand...
Click to collapse
Reinstalling the drivers is what other people have had to do to solve the problem you seem to have. For example, read this thread: ADB Issues after ICS update?
Thanks for your time and effort. I have seen this post when i was searchings for answers. Problem is that NOTHING happens when i plug the sony into the computer. Tablet does not acknowledge that debugging is available through the usb even though it is ticked on the tablet. The computer shows nothing either as the tablet has not got into communicating through usb. So to uninstall the drivers will be impossible until the pc recognises the tablet.
diddy64 said:
Thanks for your time and effort. I have seen this post when i was searchings for answers. Problem is that NOTHING happens when i plug the sony into the computer. Tablet does not acknowledge that debugging is available through the usb even though it is ticked on the tablet. The computer shows nothing either as the tablet has not got into communicating through usb. So to uninstall the drivers will be impossible until the pc recognises the tablet.
Click to expand...
Click to collapse
The computer is probably not recognizing or listing the tablet because the device drivers are borked. In Microsoft Windows, you can uninstall unlisted (unrecognized) devices by going into Device Manager, selecting "View" from the standard menu, selecting "Show hidden devices" (which should cause unlisted/unrecognized device names to be listed), then right-clicking on the device's name and selecting "Uninstall". After uninstalling the device, select "Action" from the standard menu, then select "Scan for hardware changes" to cause the computer to detect the tablet and prompt you to install the device drivers.
Hi,
MTP and PTP are full of problems... so I want to have the old reliable USB Massive Storage (UMS) enabled in this phone, Is there any ROM with this feature?
I'm with stock and I would prefer not to unlock the boot loader unless I can get that feature with a ROM.
I tried this app with no success
I want any PC to detect my phone as a USB flashdrive containing only the sdcard files, not any partitions like system or data or such.
thanks
hitokiri_jaguar said:
Hi,
MTP and PTP are full of problems... so I want to have the old reliable USB Massive Storage (UMS) enabled in this phone, Is there any ROM with this feature?
I'm with stock and I would prefer not to unlock the boot loader unless I can get that feature with a ROM.
I tried this app with no success
thanks
Click to expand...
Click to collapse
Nope. UMS is dead as far as Google is concerned.
what do you mean by that? I know some ICS ROMs with UMS (but for other phones) so it's no dead dead dead and doing a quick search there are some people using ums un Jelly bean
What I mean is, UMS support isn't the way google wants people to do things.
It's a kludge when google wants phone memory not be segmented for apps vs media and such.
I've found MTP works very well on this phone compared to others i've owned.
It's a partitioning issue on any phone that comes with ICS natively.
mmm may be I wasn't clear about that, sorry,
I only want any PC to detect my phone as a USB flashdrive containing only the sdcard files, not any partitions like system or data or such.
And we are saying it isn't going to happen. What trouble are you having with mtp? Maybe we can help.
Ok, thanks, my problem is the following
I have 3 windows machines and in all of them the following happened
> I connected the LGOG to the pc and selected the pc software option in the phone
> Installed the LG software
> The LG software Drive disappeared from "Computer" (as expected I suppose)
> The phone-drive never showed in Computer
> I unplugged the phone and plugged again and selected MTP
> The phone-drive never showed in Computer either
In one of the PCs I got an error while installing the MTP driver, don't know how to solve that, if I try to reinstall the LG software the LG software driver disappears
Also I can't copy files to my phone if I don´t have Administrative access to the PC... that's main the reason I want UMS
Uh oh.
So, if I understand correctly, I'm going to need to install CM in order to use my phone as a thumbdrive.
While I have no problems using MTP, the INSANELY SLOW TRANSFERS are basically going to force me to find another solution.
Great phone, but 2MB/sec on a standard USB 2.0 port just isn't working.
More research, it appears that I'll need to install an FTP server on my phone, or use a wireless data sharing app (sadly not possible in my case as my wireless network is firewall-external to my wired one).
Hey guys,
I have my Galaxy Tab 10.1 a few years now and it's still working great! I've rooted it many times and installed many custom roms on it. So I am very familiar with Odin, clockworkmod etc. Today, I decided to root my tab again to install a custom rom. So first things first, I installed the usb driver for my tab (GT-P7510), it's the Samsung Mobile Usb Driver for mobile phones version 1.4.8.0. After installing the driver I plugged in my tablet but nothing happend, no sound from my PC no new hardware found box, nothing. So I checked the device manager and I don't see anything there, no android adb, no GT-P7510, etc. The computer just doesn't recognize the tab. I tried reinstalling the drivers, rebooting the tablet and the PC, I did a factory reset, wiped cache, etc. Nothing worked. The only 2 things I notice is the charger/usb cable connected sound on my tablet and there's a weird red cross through the battery icon on the lower right side of my screen. Does anyone know if this is a known problem or how to solve it?
Model: GT-P7510 [P4 WIFI]
Android Version: Stock 4.0.4
[EDIT]: I managed to root the tab without the PC using the Iroot app and then I flashed TWRP and with TWRP I flashed Android 5.0. So now I am on Android 5.0!
Thanks!
Is USB debugging on or off, under Settings / Developer options? Try toggling that first.
Geronimous said:
Is USB debugging on or off, under Settings / Developer options? Try toggling that first.
Click to expand...
Click to collapse
Thanks for your reply!!
I forgot to mention that I also tried toggling that on and off several times but that also didn't work. However, I managed to root the tab without PC and I installed android 5.0 and its working great! What I also noticed is that there no longer is a red cross through the battery icon when charging but still no USB connection :/
Bram Laurens said:
Thanks for your reply!!
I forgot to mention that I also tried toggling that on and off several times but that also didn't work. However, I managed to root the tab without PC and I installed android 5.0 and its working great! What I also noticed is that there no longer is a red cross through the battery icon when charging but still no USB connection :/
Click to expand...
Click to collapse
Good thing you could flash I guess you first copied the files you needed to an external SD / USB stick, and then copied those files to the internal storage on the tablet itself?
You could try now under Android 5 is to toggle the same option again in the settings.
Another option is in the Recovery: under mounts and storage, you could try to mount the sdcard / partitions, while connected to your PC. Although you should at least have some confirmation of a connection with the PC, under Windows Device Manager. But it never hurts to try.
Geronimous said:
Good thing you could flash I guess you first copied the files you needed to an external SD / USB stick, and then copied those files to the internal storage on the tablet itself?
You could try now under Android 5 is to toggle the same option again in the settings.
Another option is in the Recovery: under mounts and storage, you could try to mount the sdcard / partitions, while connected to your PC. Although you should at least have some confirmation of a connection with the PC, under Windows Device Manager. But it never hurts to try.
Click to expand...
Click to collapse
Thanks! Will try all the options you mentioned and I'll post whether is works or not!
I solved that issue on mine by replacing the cord. the 30pin cord with these tabs is god awful.