ok so i have been having problems with everything force closing so i have been having to flash recently. recently every time i flash i odin and wipe internal. well today i flashed the latest official slim bean well i tried flashing regular jellybean gapps 4.2 and then justunbean inverted gapps. when i told it to reboot it went back to recovery and displayed installation aborted status 0.
Its a recovery mismatch. Also a 4.2 slimbean hasn't been released yet, use the 4.1.2 gapps from slim downloads.
Would you prefer my usual method of conflict resolution?
I thought 4.2 gapps was the gapps that has the new camera and and the swipe like keyboard. I've used it on cyanogen mod official cm10. So if its a recovery mismatch what would I need to do to fix it?
Sent from my SGH-T959 using xda app-developers app
I saw you posted on slim thread, did you get it fixed?
Are you running slim 4.2 that just came out?
Would you prefer my usual method of conflict resolution?
samsgun357 said:
I saw you posted on slim thread, did you get it fixed?
Are you running slim 4.2 that just came out?
Would you prefer my usual method of conflict resolution?
Click to expand...
Click to collapse
Actually I'm not. I'm running jellybean slim 4.1. I am grateful that they've been helpful on that thread. No I haven't gotten it fixed. Ive been trying to run the justunbean mod for 4.1 and I still can't get it to work. For right now though I'm running slim inverted apps till I can figure it out.
Sent from my SGH-T959 using xda app-developers app
I have one problem with Justin's... If you flash it, the phone. apk disappears. Have you used both gapps ? Step#1 followed by step#2
Sent from my SB4.2
Dougfresh said:
I have one problem with Justin's... If you flash it, the phone. apk disappears. Have you used both gapps ? Step#1 followed by step#2
Sent from my SB4.2
Click to expand...
Click to collapse
Step #1 and step#2 is for jelly 4.2 whereas I'm running 4.1 because I'm required by my parents to have a build that's at least in beats close to bring officially. I've met had that problem with just unbean before though
Sent from my SGH-T959 using xda app-developers app
You're holding your phone wrong hihi.I always replace the Contacts. apk and blast successfully
Sent from my SGH-T959 using xda app-developers app
Dougfresh said:
You're holding your phone wrong hihi.I always replace the Contacts. apk and blast successfully
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
What does replacing the contacts to for it?
Sent from my SGH-T959 using xda app-developers app
Related
My Photon is rooted, unlocked, CWM 5.0.2.8, Running CM 7 NIGHTLY 7/22. I wanted to switch to MIUI 2.7.27 Official Port for the Photon. Downloaded the Zip and GAPPS for the ROM, Nandroid Backup, Cleared Data/Factory Reset, Formated /Data, /System, /Cache, Cleared Delvik Cache and The Flashed The MIUI zip TWICE... went REALLY fast only showed MIUI Logo froze and then said rom completed. Flashed The Gapps and Rebooted... it stayed on the Motorola logo with Unlocked on the top for a whole day... i really want to switch to the MIUI Rom.... what am i doing wrong?
miui uses an installer that requires a rom to be installed on the phone. you wiped the system. don't wipe anything before installing. you can do that in the installer.
there are three files to flash. base, options then themes. it's a great rom. you'll enjoy it.
Sent from my MB855 using Tapatalk 2
So I download it from miui.us now what's the install process... its only one zip...
Bump... Anyone?
Sent from my MB855 using xda app-developers app
The zip on miui.us is only the ROM. You should be able to flash it but you have the wrong version of cwm. You need to have either jokers recovery v3, twrp, or cwm 5.0.2.7. 5.0.2.8 is from ROMmanager and doesn't work for any ics roms
sent from my MoPhoKing CMX MoPho
What is the recommended install? Kitchen sink does not react to touch...
Sent from my MB855 using xda app-developers app
Bump? If someone could tell me the best way to do this with my version of cement and the steps it would be much appreciated.
Sent from my MB855 using xda app-developers app
bradleymaustin said:
Bump? If someone could tell me the best way to do this with my version of cement and the steps it would be much appreciated.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Why don't you flash a rom that you can flash from CWM and then flash MIUI?
You could reinstall CM7 or AOKP.
Once installed run the MIUI installer (without wiping anything before starting the installer), and then install Gapps. You should then be good to go.
Also, I think you should spend some more time reading about what you're doing. It seems that you may be on the edge of not knowing what you're doing. I'd suggest (at a minimum) the first 3 posts in the MIUI thread should be understood in detail before doing this again.
In the stated version of cwm or do I need the old one
Sent from my MB855 using xda app-developers app
bradleymaustin said:
In the stated version of cwm or do I need the old one
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure. I run AOKP. I think if you've got jokers revision 3 of CWM that you're fine.
I'm on 5.0.2.7-photon3. I think you're one release newer, but make sure it's joker's version and you should be alright.
Check out qbking77 on YouTube. He has install vids for most of our roms.
sent from my MoPhoKing CMX MoPho
retailguy said:
I'm not sure. I run AOKP. I think if you've got jokers revision 3 of CWM that you're fine.
I'm on 5.0.2.7-photon3. I think you're one release newer, but make sure it's joker's version and you should be alright.
Click to expand...
Click to collapse
I'm on the rommanager version... 5.0.2.8
Sent from my MB855 using xda app-developers app
bradleymaustin said:
I'm on the rommanager version... 5.0.2.8
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I wouldn't use that. Watch QBKing77's video. He'll walk you through it. I'd put CM7 back on and go from there.
His directions are awesome. That was a good idea!
I did use those walkthroughs.... no luck... only difference is the cwm version l
Sent from my MB855 using xda app-developers app
Problem chose older version of cwm known to work yet the display is all jacked up.
Sent from my MB855 using xda app-developers app
Get jokers recovery from Jokersax.com it "should" solve your issues
sent from my MoPhoKing CMX MoPho
I m using vibrant froyo 2.2 , but it too slow and I want to move ics passion but how? Odin is not recognize my vibrant and I don't have clockwork mode.. I have e3.. And I can't install any package in recovery ..it says signature verification failed.. I can't root as well..
Sent from my SGH-T959 using xda app-developers app
LusterGFX
muhammedasim24 said:
I m using vibrant froyo 2.2 , but it too slow and I want to move ics passion but how? Odin is not recognize my vibrant and I don't have clockwork mode.. I have e3.. And I can't install any package in recovery ..it says signature verification failed.. I can't root as well..
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Why is it that you can't root?
How can I root in foyo e3 utility...
Sent from my SGH-T959
muhammedasim24 said:
How can I root in foyo e3 utility...
Sent from my SGH-T959
Click to expand...
Click to collapse
You can root by using one-click root. Worked for me.
Ok i'll .. Thanks
Sent from my SGH-T959
Aio toolbox works the best. Anyway, don't go for passion, its an old and obsolete rom. Try iczen on the rootzwiki forum, ICS chimera, doc masters, remics, cm9, slim ics, or a jellybean ROM. If you wanna go jellybean, you need to go flash an ICS then the jb ROM or you will be bricked. For jellybean though, try the hellybean or slim bean ROMs.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Aio toolbox works the best. Anyway, don't go for passion, its an old and obsolete rom. Try iczen on the rootzwiki forum, ICS chimera, doc masters, remics, cm9, slim ics, or a jellybean ROM. If you wanna go jellybean, you need to go flash an ICS then the jb ROM or you will be bricked. For jellybean though, try the hellybean or slim bean ROMs.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Your right about passion, I personally like Schimera it's really nice and customizable. Although jellybean is the one that gave me a some-what soft brick. I made a post about it called SD card, yeah that was thanks to the jellybean rom I used. So until an actual stable jelly bean rom comes out I'm gonna try that. Also the passion one was running quite well except the GPS terribly sucked.
lustergfx said:
Your right about passion, I personally like Schimera it's really nice and customizable. Although jellybean is the one that gave me a some-what soft brick. I made a post about it called SD card, yeah that was thanks to the jellybean rom I used. So until an actual stable jelly bean rom comes out I'm gonna try that. Also the passion one was running quite well except the GPS terribly sucked.
Click to expand...
Click to collapse
The jellybean ROMs are completely stable now. They only soft brick if you didn't wipe data or flashed it from stock.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
The jellybean ROMs are completely stable now. They only soft brick if you didn't wipe data or flashed it from stock.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I always wipe data/cache/delvik everytime I flash a new rom. Plus I was on ICS schimera v2.2 when I upgraded.
lustergfx said:
I always wipe data/cache/delvik everytime I flash a new rom. Plus I was on ICS schimera v2.2 when I upgraded.
Click to expand...
Click to collapse
Well then thats another problem, its not the ROM, many people flash them without difficulty.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Well then thats another problem, its not the ROM, many people flash them without difficulty.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Weird, I got the problem a day after installing that rom, thinking it was just the rom causing this problem I switched back to earlier roms. Then odin, still not a single fix. :/
lustergfx said:
Weird, I got the problem a day after installing that rom, thinking it was just the rom causing this problem I switched back to earlier roms. Then odin, still not a single fix. :/
Click to expand...
Click to collapse
Which ROM?
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Which ROM?
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Hellybean
tried to root with odin but now screen just flashes logo..
I have a GS1 4G from T-Mo, I ran ODIN 1.7, with pit file S1_odin_20100803.pit and PDA file T959UVJFD.tar, got the Green PASS, but then the phone disconnects from PC and starts flashing from Samsung Vibrant screen to all white screen..what can I do...where could i get the links for Aio toolbox..and hellybean? or what should i try? please help
iKoolkid said:
Aio toolbox works the best. Anyway, don't go for passion, its an old and obsolete rom. Try iczen on the rootzwiki forum, ICS chimera, doc masters, remics, cm9, slim ics, or a jellybean ROM. If you wanna go jellybean, you need to go flash an ICS then the jb ROM or you will be bricked. For jellybean though, try the hellybean or slim bean ROMs.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
lustergfx said:
Hellybean
Click to expand...
Click to collapse
Which build. You need to format system too. The wipe doesn't do that
Sent from my SGH-T959 using xda app-developers app
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
joeyrivGIN said:
I have a GS1 4G from T-Mo, I ran ODIN 1.7, with pit file S1_odin_20100803.pit and PDA file T959UVJFD.tar, got the Green PASS, but then the phone disconnects from PC and starts flashing from Samsung Vibrant screen to all white screen..what can I do...where could i get the links for Aio toolbox..and hellybean? or what should i try? please help
Click to expand...
Click to collapse
Aio is stickied in android development, hellybean same place.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Which build. You need to format system too. The wipe doesn't do that
Click to expand...
Click to collapse
Not sure exactly, and in the instructions it never required for a "format system" if you are referring to the option in Mount & Storage > Format System
lustergfx said:
Not sure exactly, and in the instructions it never required for a "format system" if you are referring to the option in Mount & Storage > Format System
Click to expand...
Click to collapse
It did, when I had to flash it.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
It did, when I had to flash it.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Well if I would've had to the rom wouldn't probably actually install and just put me in a boot loop. Although the installation was successful.
joeyrivGIN said:
I have a GS1 4G from T-Mo, I ran ODIN 1.7, with pit file S1_odin_20100803.pit and PDA file T959UVJFD.tar, got the Green PASS, but then the phone disconnects from PC and starts flashing from Samsung Vibrant screen to all white screen..what can I do...where could i get the links for Aio toolbox..and hellybean? or what should i try? please help
Click to expand...
Click to collapse
Sorry in advance but *sigh*. This is the 4th one in a week. The TMo 4g (SGH-T959V) is NOT the same as the Vibrant (SGH-T959) . You need to flash the correct pit and PDA files for your device. They Alsop have their own threads and forums. Just search and you will find them.
iKoolkid said:
Which build. You need to format system too. The wipe doesn't do that
Sent from my SGH-T959 using xda app-developers app
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
Aio is stickied in android development, hellybean same place.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I agree. If you ever want a clean install, formatting system is one of the puzzle pieces to do so. Wiping system and data and caches is not the same as formatting them.
Anyone can download the toolbox from my signature. I have it permanently hosted there.
Kool, I am out of thanks for the day but I'll hit you up tomorrow. Too lazy to get my phone out of the other room and use the app.
lustergfx said:
Not sure exactly, and in the instructions it never required for a "format system" if you are referring to the option in Mount & Storage > Format System
Click to expand...
Click to collapse
Most OPs should state this and my ICS install guide definitely states it. Btw those videos that show the ICS and JB installs are not all they are cracked up to be. There are edited and don't include "everything" to properly flash.
Woodrube said:
Sorry in advance but *sigh*. This is the 4th one in a week. The TMo 4g (SGH-T959V) is NOT the same as the Vibrant (SGH-T959) . You need to flash the correct pit and PDA files for your device. They Alsop have their own threads and forums. Just search and you will find them.
I agree. If you ever want a clean install, formatting system is one of the puzzle pieces to do so. Wiping system and data and caches is not the same as formatting them.
Anyone can download the toolbox from my signature. I have it permanently hosted there.
Kool, I am out of thanks for the day but I'll hit you up tomorrow. Too lazy to get my phone out of the other room and use the app.
Most OPs should state this and my ICS install guide definitely states it. Btw those videos that show the ICS and JB installs are not all they are cracked up to be. There are edited and don't include "everything" to properly flash.
Click to expand...
Click to collapse
Hmm, I never thought about wiping the system, well if you insist I will do that if I get the SD card problem fixed. If not I will buy the Google Nexus S. Thanks for the advice though.
I've recently switch from paranoid android to blackstar (. missed s memo) and have been having issues with adobe flash not properly loading.
Can anyone help me out.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I'm having the same problem. I can't get flash to work on any jb roms. It's working fine on ics though.
Sent from my SAMSUNG-SGH-I717 using xda premium
Try this....
http://forum.xda-developers.com/showthread.php?t=1774336
xsessive said:
I've recently switch from paranoid android to blackstar (. missed s memo) and have been having issues with adobe flash not properly loading.
Can anyone help me out.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I did titanium backup on blackstar and it works for me. Plus its not JB. So since you aren't on JB you don't need to follow above link. I would uninstall and do it again. Did you full wipe and all that jazz before flashing blackstar?
Hope you figure it out. Post up your solution should you fix it.
Sent from my SAMSUNG-SGH-I717 using xda premium
I did titanium backup but not for adobe flash since i was on jb and wanst using it the.
I got the apk from xda and its not loading at all.
Yes i did do all the via rom manager.
Any other ideas or am i screwed?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Got same problem, after tried to install CM10, every subsequent JB install are slow and not responding, ICS find though.
Any idea?
xsessive said:
I did titanium backup but not for adobe flash since i was on jb and wanst using it the.
I got the apk from xda and its not loading at all.
Yes i did do all the via rom manager.
Any other ideas or am i screwed?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
i googled flash 11.1 apk and found a download thru a developer. I guess its not being supported? I just use a file manager to reinstall
525iEnjoy said:
i googled flash 11.1 apk and found a download thru a developer. I guess its not being supported? I just use a file manager to reinstall
Click to expand...
Click to collapse
Did installing the flash 11.1 apk fix the issue? Please advise.
Cheers
sunariod said:
Did installing the flash 11.1 apk fix the issue? Please advise.
Cheers
Click to expand...
Click to collapse
. I did have it loaded on a Jelly Bean rom and ICS. I am not the one with an issue. I was just replying that you can load onto jelly bean
Hey Guys,
I have a Bell Galaxy note I7I7M with T-Mobile Modem Using on Mobilicity Network In Canada. At present, I am using Padawan V8 4.0.4 rom. Works perfectly fine but would like to try some other Custom Jelly Bean Roms. My previous attempts to flash went in vain with issues such as not able to pick up signal (on SlimBean) and not able to Call and recieve phone calls even with signals ( on Jedi Rom). I guess, probably will be a radio issue. Some one please guide me how to Flash and update to custom Jelly bean Roms.
Thanks a lot.
Cheers
osterizerblender said:
Hey Guys,
I have a Bell Galaxy note I7I7M with T-Mobile Modem Using on Mobilicity Network In Canada. At present, I am using Padawan V8 4.0.4 rom. Works perfectly fine but would like to try some other Custom Jelly Bean Roms. My previous attempts to flash went in vain with issues such as not able to pick up signal (on SlimBean) and not able to Call and recieve phone calls even with signals ( on Jedi Rom). I guess, probably will be a radio issue. Some one please guide me how to Flash and update to custom Jelly bean Roms.
Thanks a lot.
Cheers
Click to expand...
Click to collapse
Well firstly try downloading Jamie's latest preview and Chris's 29th kernel. Then try flashing that. Not sure about the service try a different modem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Well firstly try downloading Jamie's latest preview and Chris's 29th kernel. Then try flashing that. Not sure about the service try a different modem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Is it ok to flash 4.2.2 as I am still on ICS? Only two of the modem works on my device which is T-Mobile and ICS Blaze. Thanks for your reply.
osterizerblender said:
Is it ok to flash 4.2.2 as I am still on ICS? Only two of the modem works on my device which is T-Mobile and ICS Blaze. Thanks for your reply.
Click to expand...
Click to collapse
Yes the modem is fine and yeah 4.2.2 is good. Its surprisingly more stable then 4.1.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Yes the modem is fine and yeah 4.2.2 is good. Its surprisingly more stable then 4.1.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I am going to try it. Can you please guide me to chris`s thread for kernel. Unable to find it. Thanks
osterizerblender said:
I am going to try it. Can you please guide me to chris`s thread for kernel. Unable to find it. Thanks
Click to expand...
Click to collapse
Um its in the development thread go down a little bit
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Um its in the development thread go down a little bit
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Did not work?
Right here
http://forum.xda-developers.com/showthread.php?t=2147095
I'm on 4.2.2 and had to change kernel in order to have call audio. Flappjaxxx kernel is another one you could try, but it didn't work well for me.
I'm using Feb 29 build of the kernel which in the forum for my current ROM had the most feedback.
Basically just download the kernel, put it on root of sd card and boot into recovery. Wipe cache and then install zip from sd and choose kernel. When done reboot. Always make a backup just in case
This boot will take longer than usual. Don't worry. When booted, it will say something like "upgrading android" or something
After that, enjoy.
Someone please correct me if I am wrong at any point! I am fairly certain that ^ those steps are correct, but just in case
And lastly, I hope this doesn't become a "best kernel thread" try a few out if you aren't sure and see which one works best for you. I just recommend 4aces because it worked for me
Carry on all
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
thatdude02 said:
Right here
http://forum.xda-developers.com/showthread.php?t=2147095
I'm on 4.2.2 and had to change kernel in order to have call audio. Flappjaxxx kernel is another one you could try, but it didn't work well for me.
I'm using Feb 29 build of the kernel which in the forum for my current ROM had the most feedback.
Basically just download the kernel, put it on root of sd card and boot into recovery. Wipe cache and then install zip from sd and choose kernel. When done reboot. Always make a backup just in case
This boot will take longer than usual. Don't worry. When booted, it will say something like "upgrading android" or something
After that, enjoy.
Someone please correct me if I am wrong at any point! I am fairly certain that ^ those steps are correct, but just in case
And lastly, I hope this doesn't become a "best kernel thread" try a few out if you aren't sure and see which one works best for you. I just recommend 4aces because it worked for me
Carry on all
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I got installation aborted(status7 error) when flashing jamie`s rom. should I flash the kernel first and try to flash the rom and gapps? thanks
osterizerblender said:
Hi,
I got installation aborted(status7 error) when flashing jamie`s rom. should I flash the kernel first and try to flash the rom and gapps? thanks
Click to expand...
Click to collapse
Go download team win recovery project 2.4.4 I believe it is. The status 7 error is a out of date recovery. You can flash it via Odin or through your current recovery
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
^ that
Flash kernel after ROM. Most ROMs come with a kernel in the zip, so it would overwrite any that you install. I got status 7 and decided to try a different ROM because I was too lazy to update recovery
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Go download team win recovery project 2.4.4 I believe it is. The status 7 error is a out of date recovery. You can flash it via Odin or through your current recovery
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot Guys. @ ZacksBuilds @ thatdude02 and the developers. Its working. Made some calls and texts. Testing Chameleon @JamieD81 Thanks
osterizerblender said:
Thanks a lot Guys. @ ZacksBuilds @ thatdude02 and the developers. Its working. Made some calls and texts. Testing Chameleon @JamieD81 Thanks
Click to expand...
Click to collapse
Ok. I have a problem here. phone reboots when i touch turn on usb connection, any idea? want to flash chris kernel
That is very common for JB ROMs actually. Had that on my old phone as well... Trying to remember what I did Try a different kernel and see if that works any. I don't think it happens to me anymore but it did before.
I'm gonna spend some time searching and see what that yields. I know you can boot into recovery and enable USB transfer that way. It's supposed to be faster because it bypasses a few firmware components. But either way, that is a nuisance.
Okay, try going Settings->Storage->(Menu soft key)->USB options
From here you should be able to enable mass storage, or if that reboots on you like before, try ticking MTP. Maybe try checking developer options and see if USB debugging is enabled or not. Unfortunately I don't know which to have ticked and which ones not
Anyone? Cuz right now all of mine are unchecked (and that doesn't sound right)
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sorry for the stupid question, but apparently, it hasn't been asked before...or I just couldn't find it.
Anyway, I've rooted my XT912 & flashed the PAC man ROM to it. I got that up and running just from lurking here. However, I don't know what to do with the gapps.
I went to goomanager, downloaded the most recent version, and then found it in file manager. But when I try to open it, I get a message reading that the file is too large. Am I doing something wrong?
Thanks for the help.
Sent from my DROID RAZR using xda app-developers app
I'm not running that ROM, (I'm running Avatar) but I would assume it's the same process.
Place the ZIP file on your SD card after downloading and flash it using a recovery (I use Boot menu Manager, but Safe Strap would work too).
Sent from my DROID RAZR Maxx using XDA Premium
Derick60 said:
Sorry for the stupid question, but apparently, it hasn't been asked before...or I just couldn't find it.
Anyway, I've rooted my XT912 & flashed the PAC man ROM to it. I got that up and running just from lurking here. However, I don't know what to do with the gapps.
I went to goomanager, downloaded the most recent version, and then found it in file manager. But when I try to open it, I get a message reading that the file is too large. Am I doing something wrong?
Thanks for the help.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Here is a link to latest gApps, is what iam using with PACman VO2. http://db.tt/ivuAoCHf just flash this the same way you did PACman ROM..
Thanks for the help, I've got it up and running now. I had the wrong gapps package.
Sent from my XT912 using xda app-developers app
1droidmod said:
Here is a link to latest gApps, is what iam using with PACman VO2. http://db.tt/ivuAoCHf just flash this the same way you did PACman ROM..
Click to expand...
Click to collapse
You bet bud!! i do think goo could do a bit better as far as gApps management!!
Agreed, seems that Goo is a bit behind sometimes....
Sent from my XT912 using xda app-developers app